Problem Building stable a PC - PLEASE HELP

I managed to get the following system for an affordable price.
1. Processor : AMD Athlon64 2800+
2. Motherboard : MSI K8N Neo2 (MSI 7030) motherboard
3. DDR400 RAM: Kingston KVR400X64C3A/512
4. Power Spply : Targa Tech LC-450E
+3.3V / 28A
+5.0V / 50A
+12V / 18A
-5.0V / 0.8A
5. Graphic : MSI FX5500-TP256
5. DVD Combo : MSI X52P
6. HDD : Western Digital WD-800 80MB SATA
After assembling the pc and install WinXP SP2 and all the supplied driver. I still encounter these problems.
1. Unintentionally shutdown of application/games after a few moment.
2. Unintentionallly reboots of PC especially while testing 3D games/Benchmark.
3. Constant blue screen
II suspect a misconfigured BIOS or insufficient power supply. Hope all of u techie out there can help..PLEASE HELP. I am not those highly technical person.
Can anybody recommend me the BIOS setting suitable for my pc.

hi anjebat,
welcome to the forum
1) Enter Bios
2) Cell Menu
3) Memory Voltage = Auto ---> 2.6
4) Dram Settings
5) CAS# Latency (Tcl) Auto --> 3
6) RAS# to CAS# delay (Trcd) Auto --> 3
7) Min RAS# active Time (Tras) Auto ---> 8
8) Row Precharge Time (Trp) Auto --> 3
From pinochio's post see
KVR400X64C3A won't run at 400MHz
if it still gives problems :-
3) Memory Voltage = 2.6 ---> 2.7
If you still have problems
Memtest86+ - Advanced Memory Diagnostic Tool - Test each module in slot1. if both ok test both slots 1&2
To help with bios settings
Bios Guide
Power supply is marginal but may work if you don't add to many devices.
good luck

Similar Messages

TS3899 In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

Greetings,
Questions:
1. What version of the Mac OS are you running (Apple > About this Mac)?
2. What version of the iOS are you running (Settings > About)?
3. Do you use MobileMe/ iCloud or another server based sync solution like Google or Yahoo?
4. Do other changes to synced information like Address Book content sync successfully back and forth?
Based on your description it sounds like you have a 1 way sync issue. Events sync fine between the iOS devices and fine from the computer to the iOS devices but not from the iOS devices to the computer.
Try:
Backup your computer and iOS devices before doing anything else:
http://support.apple.com/kb/HT1427
http://support.apple.com/kb/ht1766
Ensure all the devices in use are fully up to date: Apple > Software Update / Settings > General > Software Update
Make separate backups of critical data:
Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
Backup your computer iCal: http://support.apple.com/kb/HT2966
Reset syncing on your Mac: http://support.apple.com/kb/TS1627
Reply back if that does not resolve your issue.
Hope that helps.

TS1363 My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue?

My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.

uninstall all iTunes,5 programes,this worked for me after reinstall them

I'm having a problem saving a pages document as another format, like a Word document or PDF file. I've never had this problem in the past. Please help me! I need to have this fixed a.s.a.p.

Hello everyone,
I'm currently having a problem saving a Pages document as another format, such as a Word document or PDF file. I've never had this problem before with Pages. Please help me! I need to have this completed a.s.a.p.
Thanks,
Amy

To save as a PDF, you do that from Print
To save as Wrod format, you export
Allan

HI YANN/VADIM...Still having problem in BADIs...please help me out

Hi Yann/Vadim,
Facing a problem in BADI can u please help me out...
I am implementing sourcing dashboard.
I am facing problem while implementing the badi BBP_ECS_PO_OUT_BADI in SRM. and BBP_PO_INBOUND_BADI in R3.
i have written following code in BBP_ECS_PO_OUT_BADI in SRM
method IF_EX_BBP_ECS_PO_OUT_BADI~BBP_B46B_PO_OUTBOUND.
data : ls_item type BBP_PDS_PO_ITEM_D.
data : w_customer_fields type BBPS_IF_CUSTOMER_FIELDS_PI.
move 'POITEM' to w_customer_fields-refobject.
move 'CATALOGID' to w_customer_fields-fieldname.
move ls_item-catalogid to w_customer_fields-container.
append w_customer_fields to ct_bapi_customer_fields.
endmethod.
i have created field zsrmcatalogid field in R3 in EKPO table.and i am now implementing the Badi in R3 for BBP_PO_INBOUND_BADI .....in extended classic scenario.
i have written following code in R3 BADI
method IF_EX_BBP_PO_INBOUND_BADI~BBP_MAP_BEFORE_BAPI.
data : wa_customer_fields type bbps_if_customer_fields,
wa_bapi_te_mepoitem type bapi_te_mepoitem,
wa_bapi_te_mepoitemx type bapi_te_mepoitemx,
wa_extensionin type bapiparex.
data : txt_960(960) type c.
read table bbp_customer_fields into wa_customer_fields with key
refobject = 'POITEM' fieldname = 'CATALOGID'.
if sy-subrc eq 0.
move wa_customer_fields-container TO
wa_bapi_te_mepoitem-zsrmcatalogid.
wa_bapi_te_mepoitemx-zsrmcatalogid = 'X'.
endif.
clear txt_960.
clear wa_extensionin.
write wa_bapi_te_mepoitem to txt_960 left-justified.
wa_extensionin-structure = 'BAPI_TE_MEPOITEM'.
wa_extensionin-valuepart1 = txt_960(240).
wa_extensionin-valuepart2 = txt_960+240(240).
wa_extensionin-valuepart3 = txt_960+480(240).
wa_extensionin-valuepart4 = txt_960+720(240).
append wa_extensionin to bapi_extensionin.
clear txt_960.
clear wa_extensionin.
write wa_bapi_te_mepoitemx to txt_960 left-justified.
wa_extensionin-structure = 'BAPI_TE_MEPOITEMX'.
wa_extensionin-valuepart1 = txt_960(240).
wa_extensionin-valuepart2 = txt_960+240(240).
wa_extensionin-valuepart3 = txt_960+480(240).
wa_extensionin-valuepart4 = txt_960+720(240).
append wa_extensionin to bapi_extensionin.
endmethod.
But its not working...
The PO details are not passed from SRM to R3.......
PLEASE CAN U GIVE ME EXACT CODE FOR CHANGES TO BE MADE IN THIS BADI ..AS IT IS NOT WORKING...
Can anybody help me regarding how to debug the BADI in R3.
Thanks in Advance...

Hi Ravi,
You can transfer the standard SRM catalog ID field to R/3 tracking number field (if not already used for another purpose) in the R/3 PO.
This will avoid to implement the R/3 inbound bapi.
Here is an extract of the code.
The ECS PO badi example was here used to transfer the unlimited delivery flag to R/3 PO for a Z combination of criteria as well as the transfer of <b>catalog ID</b> to <b>tracking number field</b> in R/3 PO :
method IF_EX_BBP_ECS_PO_OUT_BADI~BBP_B46B_PO_OUTBOUND.
update unlimited delivery flag in R3 PO for combination of vendor +
Product Category maintained in the bespoke table ZUD_PC_VNDR ..
LOOP AT ct_bapi_poitem INTO ls_bapi_poitem.
    lv_tabix = sy-tabix.
    IF ls_bapi_poitem-po_item IS NOT INITIAL.
      READ TABLE it_item INTO ls_item
           WITH KEY number_int = ls_bapi_poitem-po_item
                      del_ind    = ' '.
      IF sy-subrc = 0.
Set Unlimited delivery Flag
        read table li_zud_pc_vndr into ls_zud_pc_vndr
                        with key partner       = ls_partner-PARTNER_ID
                                   category_id = ls_item-category_id.
        if sy-subrc eq 0.
          ls_bapi_poitem-UNLIMITED_DLV = 'X'.
        endif.
Set the Dummy catalog.. entry..
        if ls_item-catalogid eq c_dummy.
          ls_bapi_poitem-TRACKINGNO = c_noncat.
        endif.
        ls_bapi_poitem-GR_BASEDIV = ' '.
        modify ct_bapi_poitem from ls_bapi_poitem index lv_tabix
                      transporting UNLIMITED_DLV TRACKINGNO GR_BASEDIV.
      ENDIF. "READ TABLE it_item ..
    ENDIF.   "IF ls_bapi_poitem-po_item ..
ENDLOOP.   "LOOP AT ct_bapi_poitem ..
endmethod.
Kind regards,
Yann
PS : please do reward helpful answers ))

I have a really really big problem to my iphone icloud please help me i could send you my birth certificate for confirmation that im the real user please help me

i have a really really big problem to my iphone icloud please help me i could send you my birth certificate for confirmation that im the real user please help me apple.corp and please tell me if this is not possible to be done it almost a month that i cant use my iphone.
thank you for those who read this
<Email Edited by Host>

Remove your email address. This is a public website, and you are addressing thousands of strangers.
After doing that, tell us what your issue actually is. This is a user-to-user technical forum. You are not addressing Apple here.

Firefox is having problems with "Southwest Airlines website" Please help soon

Whenever I go on Southwest Airline website, it does not work. I am having this problem since last month. Please help on this as soon as you can.

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Other things that need your attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
* Shockwave Flash 10.0 r22
* Java Plug-in 1.6.0_07 for Netscape Navigator (DLL Helper)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://kb.mozillazine.org/Flash
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://kb.mozillazine.org/Java
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

HT4623 why my device had "no service" even I already put my sim card..I have follow a few instruction from you tube how to solve this problem but all failed. Please help me .TQ

why my device had "no service" ..I have follow a few instruction from you tube how to solve this problem but all failed. Please help me .TQ

See if anything in this support document help http://support.apple.com/kb/ts4429

TS3376 I was able to use the findmyiphone app last week, but now I have been getting an error message "Can't load findmyiphone. There was a problem loading the application." please help as we are trying to locate an ipod with pics of a no deceased loved

I was able to use the findmyiphone app last week, but now I have been getting an error message "Can't load findmyiphone. There was a problem loading the application." please help as we are trying to locate an ipod with pics of a no deceased loved one.

Had the same problem and the same message -- was suddenly unable to access icloud apps on my pc, also using Windows 7 and Internet Explorer. After several days of pulling my hair out, decided to try a different browser and was able to get in by using Firefox instead of Internet Explorer. Hope this helps.

Problem with interputting accessframe example please help!!!

A use code bellow to access every frame in the movie :
import java.awt.*;
import javax.media.*;
import javax.media.control.TrackControl;
import javax.media.Format;
import javax.media.format.*;
import java.io.*;
import javax.imageio.*;
import javax.imageio.stream.*;
import java.awt.Color.*;
import java.awt.image.*;
import java.util.*;
import java.awt.image.*;
import javax.media.util.*;
import javax.swing.JFrame;
public class Film2ramki implements ControllerListener {
Processor p;
Object waitSync = new Object();
boolean stateTransitionOK = true;
public boolean alreadyPrnt = false;
public void zakoncz(){
     p.stop();
     p.close();
     p.deallocate();
public boolean open(MediaLocator ml) {
try {
p = Manager.createProcessor(ml);
} catch (Exception e) {
System.err.println("Failed to create a processor from the given url: " + e);
return false;
p.addControllerListener(this);
// Put the Processor into configured state.
p.configure();
if (!waitForState(p.Configured)) {
System.err.println("Failed to configure the processor.");
return false;
// So I can use it as a player.
p.setContentDescriptor(null);
// Obtain the track controls.
TrackControl tc[] = p.getTrackControls();
if (tc == null) {
System.err.println("Failed to obtain track controls from the processor.");
return false;
// Search for the track control for the video track.
TrackControl videoTrack = null;
for (int i = 0; i < tc.length; i++) {
if (tc.getFormat() instanceof VideoFormat) {
videoTrack = tc[i];
break;
if (videoTrack == null) {
System.err.println("The input media does not contain a video track.");
return false;
System.err.println("Video format: " + videoTrack.getFormat());
// Instantiate and set the frame access codec to the data flow path.
try {
Codec codec[] = { new PreAccessCodec(),
new PostAccessCodec()};
videoTrack.setCodecChain(codec);
} catch (UnsupportedPlugInException e) {
System.err.println("The process does not support effects.");
// Realize the processor.
p.prefetch();
if (!waitForState(p.Prefetched)) {
System.err.println("Failed to realize the processor.");
return false;
p.start();
return true;
boolean waitForState(int state) {
synchronized (waitSync) {
try {
while (p.getState() != state && stateTransitionOK)
waitSync.wait();
} catch (Exception e) {}
return stateTransitionOK;
public void controllerUpdate(ControllerEvent evt) {
if (evt instanceof ConfigureCompleteEvent ||
evt instanceof RealizeCompleteEvent ||
evt instanceof PrefetchCompleteEvent) {
synchronized (waitSync) {
stateTransitionOK = true;
waitSync.notifyAll();
} else if (evt instanceof ResourceUnavailableEvent) {
synchronized (waitSync) {
stateTransitionOK = false;
waitSync.notifyAll();
} else if (evt instanceof EndOfMediaEvent) {
     p.stop();
     p.close();
     System.exit(0);
Film2ramki(){}
public void startnow (String plik) {
     //this.setDefaultCloseOperation(this.EXIT_ON_CLOSE);
String url = "file:"+plik;
if (url.indexOf(":") < 0) {
prUsage();
System.exit(0);
MediaLocator ml;
if ((ml = new MediaLocator(url)) == null) {
System.err.println("Cannot build media locator from: " + url);
System.exit(0);
if (!open(ml))
System.exit(0);
static void prUsage() {
System.err.println("Usage: java Film2ramki <url>");
* Inner class.
* A pass-through codec to access to individual frames.
public class PreAccessCodec implements Codec {
* Callback to access individual video frames.
void accessFrame(Buffer frame) {
// For demo, we'll just print out the frame #, time &
// data length.
long t = (long)(frame.getTimeStamp()/10000000f);
System.err.println("Pre: frame #: " + frame.getSequenceNumber() +
", time: " + ((float)t)/100f +
", len: " + frame.getLength());
* The code for a pass through codec.
// We'll advertize as supporting all video formats.
protected Format supportedIns[] = new Format [] {
new VideoFormat(null)
// We'll advertize as supporting all video formats.
protected Format supportedOuts[] = new Format [] {
new VideoFormat(null)
Format input = null, output = null;
public String getName() {
return "Pre-Access Codec";
// No op.
public void open() {
// No op.
public void close() {
// No op.
public void reset() {
public Format [] getSupportedInputFormats() {
return supportedIns;
public Format [] getSupportedOutputFormats(Format in) {
if (in == null)
return supportedOuts;
else {
// If an input format is given, we use that input format
// as the output since we are not modifying the bit stream
// at all.
Format outs[] = new Format[1];
outs[0] = in;
return outs;
public Format setInputFormat(Format format) {
input = format;
return input;
public Format setOutputFormat(Format format) {
output = format;
return output;
public int process(Buffer in, Buffer out) {
// This is the "Callback" to access individual frames.
accessFrame(in);
// Swap the data between the input & output.
Object data = in.getData();
in.setData(out.getData());
out.setData(data);
// Copy the input attributes to the output
out.setFlags(Buffer.FLAG_NO_SYNC);
out.setFormat(in.getFormat());
out.setLength(in.getLength());
out.setOffset(in.getOffset());
return BUFFER_PROCESSED_OK;
public Object[] getControls() {
return new Object[0];
public Object getControl(String type) {
return null;
public class PostAccessCodec extends PreAccessCodec {
// We'll advertize as supporting all video formats.
public PostAccessCodec() {
supportedIns = new Format [] {
new RGBFormat()
* Callback to access individual video frames.
void accessFrame(Buffer frame) {
// For demo, we'll just print out the frame #, time &
// data length.
if(!alreadyPrnt)
BufferToImage stopBuffer = new BufferToImage((VideoFormat)frame.getFormat());
System.out.println(stopBuffer.toString());
System.out.println("CreatedBuffer");
System.out.println("Created stopImage");
Image stopImage = stopBuffer.createImage(frame);
System.out.println("stopImage is full");
if(stopImage == null)
System.out.println("stopImage is null");
try
BufferedImage outImage = new BufferedImage (320, 240,BufferedImage.TYPE_INT_RGB);
Graphics og = outImage.getGraphics();
og.drawImage(stopImage,0,0,320,240,null);
//prepareImage(outImage,rheight,rheight, null);
Iterator writers = ImageIO.getImageWritersByFormatName("jpg");
ImageWriter writer = (ImageWriter)writers.next();
//Once an ImageWriter has been obtained, its destination must be set to an ImageOutputStream:
File f = new File("frames\\"+frame.getSequenceNumber() + ".jpg");
ImageOutputStream ios = ImageIO.createImageOutputStream(f);
writer.setOutput(ios);
//Finally, the image may be written to the output stream:
//BufferedImage bi;
//writer.write(imagebi);
writer.write(outImage);
ios.close();
catch(IOException e)
System.out.println("Error :" + e);
//alreadyPrnt = true;
long t = (long)(frame.getTimeStamp()/10000000f);
System.err.println("Post: frame #: " + frame.getSequenceNumber() +
", time: " + ((float)t)/100f +
", len: " + frame.getLength());
if(frame.getLength()==0){p.stop();p.close();p.deallocate();}
public String getName() {
return "Post-Access Codec";
this code capture every frame from movie but it never ends running and i can't invoke any metod after grabing frames becouse its still running. How Can I stop this to enter the next metod.
Please help me
thx

Answering sam04 question Yes this make that every frame is captured
Back to my problem :
I invoke caputre frames class from other class like this:
Film2ramki f2r=new Film2ramki();
f2r.startnow(pathtomov);
System.out.println("End of capture");...........................
So when capturing frames ends it should print "End of caputre" but I get something like this :
JPEG, 320x240, FrameRate=13.0, Length=18198
Video format: JPEG, 320x240, FrameRate=13.0, Length=18198
Pre: frame #: 1, time: 0.0, len: 16282
Post: frame #: 1, time: 0.0, len: 230400
End of capture
Pre: frame #: 2, time: 0.07, len: 16471
Post: frame #: 2, time: 0.07, len: 230400
Pre: frame #: 3, time: 0.15, len: 16620
Post: frame #: 3, time: 0.15, len: 230400
Pre: frame #: 4, time: 0.23, len: 16541
Post: frame #: 4, time: 0.23, len: 230400
Pre: frame #: 5, time: 0.3, len: 16749
Pre: frame #: 18, time: 1.3, len: 15708
Post: frame #: 18, time: 1.3, len: 230400
Pre: frame #: 18, time: 1.3, len: 0
Post: frame #: 18, time: 1.3, len: 0this is strange becouse it captures 1 frame end print "End of capture" and then its capures other frames. Why ?????

Serious audio glitch problem in 9.1.1 - please help!

Got a problem with audio glitching that is driving me insane - hopefully someone can help (please! :_))
I'm on Logic 9.1.1 on a recent MacPro using 10.5.8, 12Gb memory. I've created an arrangement in Logic with two multi timbral / multi-output instruments (Kontakt and Stylus RMX - both up to date versions) with aux outputs for all of the instruments channels; 16 in the case of Kontakt, 8 in the case of RMX.
I'll work with this setup and after a while I find that whenever I play and then press stop, a tiny portion of audio will repeat rapidly, over and over again in the 'master' left output channel at +6.0dB - it also shows up on all the instrument auxes at a much lower level. It's as if Aphex Twin has invaded my Mac... Weirdly, this problem crops up even if I'm not outputting anything from the multi-instruments - it's enough that say, an EXS instrument, plays something, I'll press stop, and then the glitch signal will appear in all the level meters of the multi instruments and master output, but not on the EXS level meter. If I press play again, the glitch disappears and audio playback is perfect - it only happens when stop is pressed. And no sign of it if there's a silent part in the arrangement with no tracks playing anything.
If I have any instances of reverb on bus channels, that audio will will also feed into the left channel of those busses, even when there are no channel strips sending to them. Weird as ****, and driving me up the wall with frustration.
I've omitted it being down to my audio interface (Metric Halo 2882) as the problem persists if I switch to the Mac internal I/O.
I'm trying to work through this at the mo as I've got a deadline for 2pm this afternoon - but I'm worried I might not make it due to throwing my feckin computer out the window. Please help - thanks!

Alasdair Reid wrote:
It's as if Aphex Twin has invaded my Mac...
If your deadline wasn't looming, I'd say buss everything to a stereo track and record this stuff. It sounds great, you could use it in another project later...
But to your problem: The only quick solution I can think of for you to try is to create a brand new fresh project and use the selective track import feature to bring your tracks into the new project. Don't start from an old template (that you may still be using since Logic 8 or something) because this could indeed be the root of the problem. Build a new template from Logic 9.1.1, then make a new project from that and import all your tracks. If it's your project that's corrupted somehow, this could be the trick to solve it, and it won't take too long to try, so it's worth a shot.
I'm not sure of this, but something is telling me I've seen this problem before, and if so it was on Leopard (not Snow Leopard) on a MacPro in the studio. Have never had it on my personal MBP (which was only ever Tiger and then Snow Leopard - I skipped Leopard on purpose because the studio machines seemed so very dicey). Also, I don't use RMX on my own machine but in the studio, yes. Same deal for multiple output instruments, I rarely do that either. On that point, another thing you could try is to forget about multiple outs for now, and just work with stereo instances. Yes I realize this will mess up your entire painstakingly built-up mix.. but if this is causing the flakiness you may have no choice but to go back to stereo instances, finish your writing, then do the whole mute/solo thing to bounce your individual parts to audio and proceed from there. In this scenario, selective track import will be a timesaver too because once you've done all the bouncing, you can just create a new project and import all of your channel strips and so on, to then re-assign the individually bounced tracks to the assignments you had before. Will be quicker to recreate your mix than having to do it from scratch. Or you might not even need to do this step because if eliminating the multi-out instruments makes the prob go away, then you can just recreate your assignments within the same project using the bounced audio tracks.
Get to it.
Once you've delivered.. I'd open that project again and record all of that lovely Aphex Twin messiness for later use.

IOS 8.0.2 update causing problems with wifi connectivity..please help

latest update having problems ...please help..!!!!!!!!!!

Just a quick snapshot of my chain of events. I’m currently on my fourth iPhone 6 Plus 64GB here in London, UK. Every time I have spoken to AppleCare and told them that I have gone through all the Wi-Fi troubleshooting methods possible they have asked me to get a brand new retail replacement as I’m within my 14 day return period. I’ve been experiencing the following issues:
Wi-Fi disconnects and switches to 4G (Restart required for temp fix)
Wi-Fi is still active but there is no traffic or activity– often when in sleep mode for long periods of time. (Toggle Wi-Fi on/off for temp fix)
Wi-Fi disconnects and cannot find any networks (restart required for temp fix)
This has been occurring on both iOS 8 and 8.0.2
The issues are the same on both my 2.4Ghz and 5Ghz networks
This is affecting my ip6+ and 5s (5s used to work perfect on ios7 on same networks) – My MBP-R and all other devices run perfectly on my network.
I spoke to AppleCare again yesterday and asked for their advice as its now my fourth iPhone in just under a month. This time they said that apple were fully aware of the Wi-Fi problem and that new repair tickets were not being raised for their engineers as they are already working hard to get this resolved. They also said they could see all the issues raised on the apple discussions boards which they usually don’t admit too! I asked what to do next and the advisor apologised and said this is clearly a software glitch and will be resolved in the next update. I asked for a timescale but unfortunately none was given.
As stated above I have tried all the troubleshooting methods discussed on forums and on tech websites but the only thing that gives me a stable connection without any disconnects (especially on my 6 plus) is turning cellular/mobile data off when I know I’m going to be on Wi-Fi for a sustained period of time (e.g. at home or work). I appreciate this is annoying but it’s the best temp fix until an update comes out.
Hope it helps everyone who is having issues with their devices that have cellular functionality.
Any comments welcome

Problem displaying an Excel File: Please Help

Hello,
I spent 3 hours this morning reading the forum on how to display an Excel file in the browser using JSP and I apologize in advance if the answer is in the forum.
I cut and paste many examples: My goal is to display an excel file on the browser.
Below is the code but the result is a disaster (please se after the code the result).
My question is how can I display an excel file using the browser. What's wrong with my code. Apparently it worked for many people on the forum.
Please help. I must do that by tomorrow and I had spent already so many hours.
THANK YOU SO MUCH IN ADVANCE.
So far the forum had helped me a lot.
<%@ page language="java" import="java.io.*" %>
<%
String myfile = new String("/temp/temp.xls");
File fileName = new File(myfile);
// Setup our streams
FileInputStream fis = null;
ServletOutputStream out1 = response.getOutputStream();
// Set content type and other response header
response.setContentType(getServletContext().getMimeType(fileName.getName()));
//response.setContentType("application/excel-document");
//response.setContentType("application/vnd.ms-excel");
response.setHeader("Content-Disposition","attachment; filename=\"" + fileName.getName());
response.setContentLength((int) fileName.length());
// Read in the file from the correct place and stream it to the user
int iRead;
FileInputStream stream = null;
try
stream = new FileInputStream(myfile);
while ((iRead = stream.read()) != -1)
out1.write(iRead);
out1.flush();
} catch (IOException i) {}
%>
RESULT:
��>�� @��\p Yahel Malkin B�a�=��=��@�7 ��Oh��+'��0p08 P \h� Yahel Malkinn@�|�$�+�@�|�$�+��.��+,��0�HP X`hp x �� competitivePricingReportSave Worksheets�� Root Entry�� F��T�+��Workbook��SummaryInformation(��DocumentSummaryInformation8��

For those who are having the same problem than me here the solution:
In fact I was only interested in saving the file
<%@ page language="java" import="java.io.*" %>
<%
String myfile = new String("/temp/temp.csv");
response.setContentType ("application/vnd.ms-excel");
response.setHeader("Content-Disposition", "attachment; filename=\""+myfile+"\"");
int iRead;
// Setup our streams
FileInputStream fis = null;
ServletOutputStream out1 = response.getOutputStream();
FileInputStream stream = null;
try
stream = new FileInputStream(myfile);
while ((iRead = stream.read()) != -1) {
out1.write(iRead);
out1.flush();
} catch (IOException i) {}
%>

How to remove 1797 emails. stuck in inbox. but not showing anymore - and i have the same problem wit the sent. please help

how to remove 1797 emails. stuck in inbox. but not showing anymore - and i have the same problem wit the sent. please help

This is a user supported frum, so making threats really doesn't help, besides which it's not like any of us can really make a dent in Toshiba's bottom line despite how many people we think we can influence. Unless those people were standing in line to buy a Toshiba product cash in hand, and you pulled them out, it really doesn't add up for them.
At this point it would probably be better for you to use the 800 number. Have all your e-mails ready to forward, if needed, to whoever you end up talking to. Don;t let them off the hook. An hour on the phone is much better than weeks passing e-mails through a support site. Also contest the charge with your bank or credit card.

Problem with Logic XS Key, PLEASE HELP

I use my G4 Powerbook laptop for live. I am running most recent version of logic.
What happens is that Logic will load up fine, but then for no apparent reason logic will come up with an error message saying that the logic key has been removed, but i have not touched it!! I then have to restart logic.
PLease help i have to get this sorted ASAP cuz i have a gig tomorrow nite. Cheers guys

Hmm, it does it on both USB ports? And you haven't noticed any problems with other USB gear on those ports?
When the key is next not recognised by Logic, go into the system profiler and find your USB port that the XS key is on - the XS key will be labelled when it's functioning correctly. Is it still recognised by the computer, or has it gone completely?

Problem Building stable a PC - PLEASE HELP

Similar Messages

Maybe you are looking for