Problem burning disc with Disk Utility

I made a DVD in iDVD. I checked to see how big the project was and I had only used 1.2G or the 4G available. I then did "save as disc image" to my desktop. After that was completed, which took over 2 hours, I tried to use Disk Utility to burn a DVD. When I insert the DVD it says there is not enough space available. I then check my project in iDVD and the line that tells the amount of space used is completely red (all used up and over). I completely shut down iDVD and reopen and the project is back at the 1.2G size. It's a relatively small project so I'm fairly sure that it really is 1.2 and not over the limit.
I tried this procedure twice to make sure there was enough space when I start the whole process.
In the very beginning I tried to burn the project within iDVD. It burned and ejected but the screen didn't reflect that it had finished and did not ask if I wanted to burn another disc. The screen said it was still finishing the burn. The disc had ejected and it played just fine on my t.v. The only problem with this way is that I need to make lots of copies of this and having to force quit and start again makes every disc take approx. 2-1/2 hours each.

Evidently I'm not understanding what you are asking.
When I'm in iDVD I go under Project and click
"Project Info". Project Duration is 36:01 minutes.
In DVD Capacity it says 1.0 GB of 4.2 GB is being
used. I thought that was what you were wanting.
Thank you for your help. If you could tell me where
to look for the info you want I will do it promptly.
The Project Information probably doesn't include the DVD-ROM contents you want to include (and it's only a poor guess at what will be actually needed).
If your project is 36 minutes, I would expect it to actually require over 2 GB of DVD space with either 'Best Performance' or 'Best Quality' selected.
It was my understanding at the start that you HAD created a disk image file on your hard drive of your iDVD project. Is this true? This WOULD include the DVD-ROM area if things went well. I am asking you to tell me the actual size of this disk image file (click on it to select it and then select File>Get Info).
I suspect the size of the DVD-ROM area you want to create is causing your problems. Are all the digital images you want to include in the DVD-ROM area in one folder? If so, what is the size of this folder (click on it to select it and then select File>Get Info)?

Similar Messages

When burning iso with disk utility, the audio is off!

I have an ISO file that works fine when I mount it or watch it on VLC. If I burn it using windows (in parallels) it is fine...
But when I burn it with disk utility, the audio is off by a second or so. I can't figure this out since it is a disk image. there shouldn't be a way to dissociate the audio. I did have a previous version of the iso file that was off.. Is it possible that I am trying to burn an iso file and it is burning a mounted version from before (even though I am choosing this from the finder?)
Any thoughts or suggestions?
I though macs just work. Seems a bit more complicated.

I don't recall for sure about "disk utility" and DVD and/or Bluray. It seems to me that Toast is usually used.

Burning .iso with Disk Utility (Mac)?

Anyone doing this? I read it can be done but I just tried and it didn't work.
It's been a long 72 hours or so trying different ways to get my 82-minute 3D feature to various bluray permutaions (i.e. side by side, red-cyan, and of course, 2D) (saving the MVC multiplexing for another day).
Anyway, I was hoping I could just make an .iso image in Encore and then burn multiple copies with Disk Utility. Some sources say it can be done, but it didn't work on my 10.8 iMac. Thanks, all!

I don't recall for sure about "disk utility" and DVD and/or Bluray. It seems to me that Toast is usually used.

Help burning DVD with Disk Utility

I have a Mac Mini with a SuperDrive.
System Profiler confirms that I can write a DVD-R:
But Disk Utility won't let me burn a DVD. With a brand spanking new blank DVD-R in the drive, it says "Write Ability: Read Only":
What's the problem, and how do I burn my .dmg disk image?
Mac Mini Intel Core Duo Mac OS X (10.4.7)

Eject the disk.
In disk Utility, select the disk image file and click the burn button.
A drop down window should appear and ask for a blank disk. Insert the disk.
Soon the window should change and show burn options, and the burn button at the bottom right should turn blue. Choose any options you need and click the blue burn button.

Cannot burn dvd with disk utility

Hello together,
i try to burn a dvd in my Mac mini with superdrive using the disk-utility.
It is possible to delete a DVD +RW (fast or normal)
It is not possible to set a new name for the disk
It is not possible to burn the disk ("not enough space")
I'm logged in as admin.
Whta do i have to do else to burn a dvd?

thank you, now i can go on

Problems with Disk Utility & Mounting DMG!! Help!!

Hey guys, im a fairly inexperienced mac user anyways I recently bought a IBOOK G3 with Tiger 10.4 and i'm having major issues with Disk Utility and installing applications.
The issues with D.I are that it loads up then I get the error message "Disk Utlity started but a background process needed in Disk Utility didn't start properly. Please quit and restart Disk Utility. And when I do restart it, i get the same error over and over.
Also my second problem is whenever I try to and install DMG files I get the error: "Broken Pipe" and sometimes "Device Not Configured"
I've tried searching for resolutions for each problem but they both involve the other functioning! I'm really at a loss, i've tried using programs like pacifist to reinstall my original files etc and they haven't seemed to help.
Any advice would be greatly appreciated! Thank you xxx

Hi Kellie, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
Report if there were errors please.

I have a problem with disk utility that is not on my mac pro

I have a problem with disk utility that is not on my mac pro

Open your Applications folder then open the Utilities folder. It should be there.
If not, click the magnifying glass icon top right corner of your screen. That's Spotlight.
Type: Disk Utility
Hopefully it will show up.
Mac Basics: Spotlight

Problem Erasing external drive with Disk Utility

I've just purchased some Western Digital My Book Pro 1Tb firewire drives. They come pre-formatted for Windows. When I try to initialize them, Disk Utility returns a failed message & the drive then disappears from the desktop. It is still visible in Disk Utility. I can reformat as a FAT partition but not as a Mac partition. I tried connecting the drive to machine running Tiger and was able to format as a Mac partition. Is there a problem with Disk Utility in Leopard?

I have seen some behavior like this a few times before. When this happens I go to my Linux box and dd a bunch of zeros to the beginning of the drive, this will blow away any partition tables and such.
dd if=/dev/zero of=/dev/sdb bs=512 count=100k
This writes 50MB of zeros to the raw device "sdb" (this may be different depending on your system)
I've tried to dd from MacOSX, but for whatever reason it's painfully slow.

Problems with Disk Utility Repairing Permissions

Has anyone who had problems with Disk Utility after installing 10.5.1 through Software Update been able to resolve them by installing the Combo update instead?

The Solution?
REINSTALL OSX using the Install DVD.
I called APPLE Support and we went through a troubleshooting process to rule out Network Issues, Software Issues, File Issues and Hardware Issues. This process was very thorough.
In the end, we used the Operating System Installation DVD to reinstall the system, which took about 60 minutes including downloading the updates. Reinstallation did not affect any files or lose any applications. Everything was as I left it -- nothing was missing. Easy.
Now everything is back to normal.

TS2570 Question re: "Start from your Mac OS X Install disc; use Disk Utility"

I've worked my way through the step-by-step trouble shooting in the TS2570 article up to "Start from your Mac OS X Install disc; use Disk Utility". So far, every step results in the same outcome - my formerly trusty 2007 Intel duo core iMac (24") will not start up, freezing on a grey screen with a blinking question mark on a folder. I don't completely understand this next step. I have both a Leopard and a Snow Leopard disc. I'm not positive whether these were for the iMac, or my old Macbook Pro. I assume this makes a difference.

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Cannot Set Burn Speed in Disk Utility

Hi all,
It's been so long since I posted a question (years), I had to redo my settings and start over! Anyway I plan to make multiple DVDs from an FCE project of my daughters soccer season. I've done this in the past and make about 20 per season, but had trouble making then all work using iDVD'06. (Made alot of coasters.) I use Maxell or Verbatim DVD-R both at 16X. Then I was reading here about making it a disk image and then burning it at 4x with Disk Utility. I tried a test of an existing disk image file I made, but the speed option is 'grayed out' for some reason. Not sure why it is not selectable. I did the following:
1. Opened Disk Utility
2. Clicked on the .img or .dmg file
3. Clicked the Burn icon
4. A new window dropped down and I inserted a DVD-R
5. Clicked the 'Close' button
6. The speed selection is 'grayed out' but the 'Test Only' radio box was available
7. Hover my mouse over the 'grayed out' selection and it says 'Select a slower speed to work around burn failures', but I can't
Appreciate any help.
Thanks,
Rod

Yes, you can set the burn speed in the iDVD '08 Preferences (finally).
I just can figure out what your problem is with Disk Utility - it's probably something simple we are overlooking.
+++++++++++++++++
You are CERTAIN that the DVD you tried had not already been burned to?
Message was edited by: F Shippey

Can Time Capsule hard drive be accessed with Disk Utility? I'm having issues...

How does one mount , inspect , verify , and possibly repair a Time Capsule hard drive with Disk Utility ?
My 500Gb 1st gen Time Capsule ( used wireless with Airport) has quit backing up new data . ( iMac Core2Duo, Snow Leopard) . TC says it needs 238 Gb of available space, but only has 35 Gb available. So it quit doing new incremental backup altogether. It's almost like it wants to start over.
Airport connection seems good. Time Capsule seems healthy enough ( for being 3.5 years old) . I really dont want to lose the data on the existing backup.
What is the nature of this glitch ?

I'm sorry , LaP , but " Time Capsule become too full " is not the cause of my problem .
In fact, I just got done pruning the iMac system hard drive a little to free up some 10 Gb of new space , yet created only maybe 1-2 Gb of new data to archive. The TC had been doing regular daily backups without issue and Time Machine was showing me stuff from about ten days back.
The TC informed me it needed 235 Gb of space but only had 34 Gb available. That 235 Gb needed is totally in error. My problem more resembles corrupt hard disk directories . Maybe Permissions ? which is why I asked about using Disk Utility.
Yes, I do need a newer larger TC, but pigs don't fly and money does not grow on trees to make tha happen. The backup I have now is fine and should work if I need to restore anything in the forseeable. New data will not be archived, alas.

Cant restore my macbook with Disk utility and my .dmg image

My macbook would not boot anymore. Stuck on gray screen with apple logo, spinning wheel and a loading bar for a while after shutting off.
I was able to get to Disk Utility in the recovery mode and, after a while, was able to make an image of my filesin an attempt to back them up.
The .dmg was put on an external and i checked it on my imac, i could open the .dmg file and browse all my files from my macbook, so those are safe!
After that i tried to wipe the SSD of my macbook and put the image back but that didn't work, also some resource is busy errors.
After trying this a few times without succes i figured i'd try to do a clean install. This worked.
My macbook air is working again but if Iuse Disk Utility in the recovery now and try and restore my image (.dmg file) it gives me Restore Failure; An error (-16) occured (resource busy) as well. I also tried to copy the dmg onto my macbook and run disc utility when booted into OSX. I open up the back up .dmg with Disk utility, then i go to my macbooks partition (Macontiosh HD) and use that as a destination and drag the mounted image as the source as shown on the image below. Am I doing something wrong here?
Doing this i get an error as well: (-119,930,878) Resource busy as you can see.
What can i do to get my image back on my macbook? Any 3rd party software?
I considered just transferring the files after opening the .dmg file but this works only for documents and not for programs and settings of the default apps.
I've looked all over the Internet and it seems more people have had this error but then with making the image, they also suggest unmounting the destination disk before trying to restore but my destination is Macintosh HD, i cant really unmount that can i?
Thanks in advance!

To make a clone, in the future you need to use a program like superduper or carbon copy cloner.
Either program makes an identical clone while preserving certain system files and marking/indicating to OS X that the clone is bootable.
Using Disk Utility to make a DMG was a good idea, but this will not yield a bootable image.
If Disk Utility could do a 1:1 copy of everything, then people would be using it to rip/duplicate DVDs.
But Disk Utility does not (it leaves out certain invisible/system files), hence it cannot duplicate/clone a hard drive or DVD.

Creating a mp3 disk image with disk utility

Hi,
I'd like to create a mp3 disk image with disk utility. In the end I would like to have a mp3 disk that plays in various stero system and macs.
But I want to add some additional files: a png file for a nice folder background of the dmg, a special image for the dmg, and some text files relating to the mp3s.
Is this possible at all? Is there something I have to observe creating the dmg?
Thanx for your help

Is this possible at all? Is there something I have to observe creating the dmg?
You need to know which file systems your "various stereo systems" understand. The default file system created on a diskimage when burning is a hybrid file system- HFS+, ISO-9660 with Rock Ridge, and Joliet with Rock Ridge.

Help with Disk Utility

I have a removable usb flash drive that I've been using for a while. Occasionally I need to erase it with disk utility to remove all of the past information it has held. This time around though the drive doesn't seem to be created (I'm not sure if I'm saying that the right way or not).
I've included a photo here:
http://northeasternxposure.com/help/drive.png
Normally there is the "983.0 MB VBTM . . ." drive with the "UNTITLED" one below it. As you can see the "UNTITLED" drive doesn't look like a drive, but has the icon of a document. And at the bottom it shows the capacity, yet none of it is available. This is why it won't mount. I've tried to redo it multiple times with no luck. Hopefully someone knows a setting or something that I should change to repair this problem.

I went into Finder and it could still see the drive, yet not access it for some reason. So what I did was log out and then back in and everything was working fine again. I've got no idea why that problem had occurred, but thanks for the quick responses.
And I always do remember to mark helpful and solved. Thanks!

Problem burning disc with Disk Utility

Similar Messages

Maybe you are looking for