Problem BW : DTP lost source system mapping and new one created?

I had a little question concerning the BI content activation, when you have to activate objects and there are two source systems, one of them already with a flow working. Do you have to check both source systems in your screen of source system selection, if there are shared objects? I was afraid if I only checked the one I wanted the existing one would dissappear? I donu2019t want to touch the existing one as it was a 3.5 flow which has been migrated to 7.0.
I have also another question, which is a worse scenario of what has happened recentlyu2026!! Imagine you have originally one source system in your BW DEV environment (towards QA) with a certain amount of Datasources connected to it as well as some DTPu2019s. A new source system was added to this BW DEV (towards PROD). Do you think adding this new source system could have an impact in the mapping of the DTP towards the Datasources? In fact, some of our DTP have been modified and they are pointing to the incorrect Datasource/Source system. These DTP were created manually as well as the Transformations as it was a former 3.5 flow. Do you know a way to bring it back to itu2019s previous connection. Maybe a table that points to the correct source system or a function module? RSBKDTP and RSBK* tables do not store this info (only descriptions) and RSRV doesnu2019t do it.
Please let me know if you have had a similar case! Points are waiting and the gratitude of my boss...lol

Any ideas?

Similar Messages

Source System Mapping between BW Dev and Prod system

Hi,
I have a DB Connect Source System in BW Dev system called DBSRCDEV which points to one of our Oracle Dev DB.
In Production, the DB Connect Source System is called DBSRCPROD and it points to the corresponding Oracle Prod DB.
In Development, I created a data source on this Source System (DBSRCDEV) and I tried to transport it to Production. But it failed with error saying that DBSRCDEV does not exist.
Where and how can I maintain or configure the mapping between DBSRCDEV and DBSRCPROD Source System so that I can transport my data source to Production?
Please help.
Thanks,
CH

Hi,
usually you need to maintain the setting for the change of the logical system name (source system) in each target system of a transport. So in your prod system goto rsa1->tools->change logical system names...
After maintaining that table, try to import your request again.
regards
Siggi

Source system mapping between BW systems

Hi All
I have question regarding source system mapping between BW systems
We are in BW7 and we still have BW3.5 objects (Cubes,IO,ODS ets)
We have 1 source in BW Dev that need to split to 2 different sources in BW QA
e.d BW Dev map to ECC Dev 110 and when we transport ,it should map
to 2 sources ,one is ECCQA Clinet 200 and another map to ECCQA Client 210
in the conversion in BW QA we have mapped it to the 2 ECC QA sources but
the problem is that if we would only work with BW7 objects this will work but since we have
also BW3.5 objects the mapping in not complete for the 3.5 objects , we also checked the 7.0 button in the conversion and it still have missing objects

Hi... i dont understand your isse you have one source of transport and in the destination if points to two systems and this works for you....and your problem is in 3.5 objects? its a version problem?
Regards

Source system mapping/conversion between BW systems

Hello BO/BW Forum
I have question regarding source system mapping between BW systems
We are in BW7 and we still have BW3.5 objects (Cubes,IO,ODS ets)
We have 1 source in BW Dev that need to split to 2 different sources in BW QA
e.d BW Dev map to ECC Dev 110 and when we transport ,it should map
to 2 sources ,one is ECCQA Clinet 200 and another map to ECCQA Client 210
in the conversion in BW QA we have mapped it to the 2 ECC QA sources but
the problem is that if we would only work with BW7 objects this will work but since we have
also BW3.5 objects the mapping in not complete , we also checked the 7.0 button in the conversion
any assistance is highly appreciated

Hi,
Hope you aware of Infosources interacts with Replicated Datasources.
As per your post, BW1 is a source system for BW2 and BW3.
So, you have to create Infosources in BW2 and BW3. So you have to replicate the datasources in BW2 and BW3.
Regards,
Suman

Source system mapping for transport

We just create a change request for an InfoSouce. Now we transport this change request from DEV system to TEST system. But when this change request was imported on TEST system, got the "Method Execution" red error which can be checked through STMS in log. The red error msg is "Source system A does not exist", where A is our R3 DEV server. Actually we need the source system B which is R3 TEST server in the InfoSouce transported into BW TEST system, but the problem is that the change request was created on BW DEV which uses A as Souce System in the InfoSouce, then how to make the InfoSouce has B on BW TEST after the transport?
Roberto gave an answer (see my another post: What should BASIS do for an InfoSource transport for Souce System change?) as below:
"you have to set the source system mapping in your target system in RSA1, Transport Connection -> F8 and then import your request again !"
But he said this setting would be done at the target or TEST system. I don't think it's right, this mapping setting should be done at the DEV system since our transports are created in DEV Transport Connection, am I right?
Please verify who is right?

hi Kevin,
let's refer to sap's doc
'bw and transport'
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
p. 33
'.. make sure to set the source system mapping configuration in each target system to convert the transfer rules ..'

Source System mapping while transporting objects from Q to P

Hi All,
I have moved all my transports from BW DEV to Q twice with different source system mappings, say R3D to R3Q and again R3D to R3X, as I have to do testing from both the source systems.
Now, I have to move all those transports to PROD and I found out that they will be moved from Q to P and not from DEV to P. In such case, what source system mapping should I maintain in P? Is that R3Q to R3P or R3R to R3P?
Hope I am clear with my question. Please let me know if it is not clear.
Thanks,
RPK.

Hi Nasiroddin,
Itseems I am not clear with my question. Let me put it in another way.
My BWQ is connected to two R/3 source systems, say R3Q and R3X where as my BWP is only connected to R3P. While transporting the requests from BWQ to BWP, I know that I have to maintain the source system mappings(Tools->Mapping of the source system names). Now I am in doubt about what mapping do I need to maintain(either R3Q->R3P or R3X->R3P)? Which source systems transfer rules etc.(all source system dependant objetcs) will be transported, either R3Q or R3X?
Thanks,
RPK.

Source System mapping for BW configuration transport

I create a data model mapped to the testing source system i.e DEV201 but the configuration source system is DEV200.
Now i am about to transport the BW configuration to BW-QAS , I am wondering if I have to assign the data model to the config. source system(DEV200) or i can created a transport request attached to DEV201 ?
Is there any concern on this ?

Hi,
I'm not clear your system landscape. Do system landscape like that:
BWD (BW development) --> DEV201
Now you want transport all objects to BW_QAS with connected to DEV200.
If this is true, you do like this:
- On BW_QAS: create source system (DEV200). Maintain conversion of source system after transport (Original: DEV201; Target source system: DEV200).
- After that transport your modeling from BWD to BW_QAS.
Hope this helps
BR
TRUC

Source system contain more than one fold then they are not processed

when a mail box for a source system contain more than one fold they are not necessarily manage in the right sequence order (FIFO)
The folders stand for material update flows.

Hi XI Experts,
I have a problem with source directory of the File Adapter,
XI system is not reading the files from the source directory in the sequence when there is more than one folder .
See the below description regarding the same.
"when a mail box for a source system contain more than one fold they are not necessarily manage in the right sequence order (FIFO)
The folders stand for material update flows."
Please update me as soon as possible.
Regards
sreenivasulu

We would like to test old deltas from the source system( copied to new)

Hi Gurus,
The scenario is
They will make a DB copy of the Prod system onto a QA system, the Copied system will have
its system ID changed(SID) to a new one.
There will be deltas available in the RSA7, as this is a copy of the 3 weeks old prod
system. Now the delta's will be available on the Copied system pointing to the BW Prod system.
We would like to test these delta's to BW Dev. why we would like to do the delta's to the
BW dev system is to check whether we can do system copies without clearing the delta's on
the source system.
After the system copy we will do all the activities necessary to reflect the system changes
a. Like BDLS, We20, we21,ALE checks, RFCDES, RSLOGSYSDEST, RSBASIDOC, etc on the source system to
reflect the changes of the BW Prod system to BW Dev system.
b. Likewise, we will perform all the above activities on the BW dev system by changing the
existing source system to the new source system( performing BDLS,we0, we21, etc)to reflect
the new Source system with the new (SID).
c. We will check the source system connection
d. Replicate the datasources on the new source system
e. Activate the Transfer rules for the new source system.
Now for us to do delta's from the new source system to the Bw dev system we need to change
underlying tables in source system to point the delta's, arfc TID's etc to the BW dev system.
We can change the entries in the TRFCQOUT, ARFCCSTATE, ARFCDATA tables to point the LUW's and
destination to the BW dev system.
What I presume is if we run the BDLS on the Copied system to change the BW prod system to BW
and also the underlying Tables for the LUW's and etc will still be pointing to BW Dev. I would
like to know if this is the case .
Lastly, appreciate if anyone can say if this is possible to do without having to clear the
BW delta queue on the source system.

Hi Ramesh,
Appreciate a lot for your response, but i would like to know if we can reflect the entries in table RSSDLINIT(Last Valid Initializations to an OLTP Source) and RSSDLINITSEL(Last Valid Initializations to an OLTP Source) in the BW system on the copied source system
tables ROOSPRMSC(Control Parameter Per DataSource Channel), ROOSPRMSF(Control Parameter Per DataSource Channel) by executing the ABAP program RSSM_OLTP_INIT_DELTA_UPDATE after we do the BDLS conversion on the new copied source system.
After the BDLS conversion I reckon the entries in the RSA7 queue, ARFCCSTATE, TRFCQOUT tables willl reflect the BW Development system instead of the BW Production system isnt it.
response much appreciated.
Kalyan

I just bought a new computer. My old computer was a 32bit system but my new one is a 64bit. I own ps cs6. My question is"will I be able to deactivate ps on my old system, and download the 64 bit version and install and activate it or do I have to buy t

I just bought a new computer. My old computer was a 32bit system but my new one is a 64bit. I own ps cs6. My question is"will I be able to deactivate ps on my old system, and download the 64 bit version and install and activate it or do I have to buy the 64bit version in order to move forward.

Nope, you can install it on your new computer with no issues. The disc contains both the 32 and 64 bit versions.
Benjamin

My recovery disc created was lost, how do i get new one??

my recovery disc created was lost, how do i get new one??

Hi:
I doubt you can get the disks from HP anymore.
You can call them and ask because getting a recovery disk set from HP will cost you less than $20.00, most likely.
In the event I am right about HP no longer having them, you can get a recovery disk set from this place below if the license on your PC is for Windows XP Professional.
http://www.computersurgeons.com/productdetails.aspx?ID=1709
Paul

TS2972 I enabled home sharing on old computer and new one but home share icon never shows up on new computer

I enabled home sharing on old computer and new one but home share icon never appeaers on new computer

I've seen several other people ask this same question, but not one single reply. What gives??

Problem in R/3 Source System

Hi,
I requested basis Guy to create R/3 Source system.
He created, But when I want to Replicate the Data sources,
When I double click the R/3 Source System
I will get this Messege
" There is no application component hierarchy
in BW for source system &1.
Load application component hierarchy from the source system now? "
I won't get the Hierarchy and I won't see any Data sources here?
what is the problem?
Even My basis Gye says , R/3 Source System working Fine , he says I need to do some configuration.
Please Help me
Thanks
Priya

Hi Eugene,
I previously selected OK button, but i couldn't get the Data sources Hierarchy?
what is the problem?
i am using ECC.5.0.
I selected the Source system Right click then I selected CHECK, i received the message
Source system connection OK.
if source system connection is good why don't i get the data sources?
Basis Guy selected Below option to create Source System
SAP System From Release 3.0E (Automatic Creation)
Source System Icon also looking different, In previous 3.XX we can see the Icon R/3,
but here R/3 Icon is not displayed.
I need to do any configuration for getting datasources?
please help me
Thanks
Priya

Source System Mapping in QC

Hi Experts,
Iam doing Transport from Dev to QC, Everything went well.Small Problem is PC Source system (DataSource is Inactive)for all PC Source system files. Pl Help.Urgent.

Hello Param SiVam,
How r u ?
Check the Technical name for the FLATFILE Source System in the DEV system & QC System. If this is different then u may have to change the Source System Assignment.
As we know the DataSource & InfoSource name is same.
If both are same, then Right click the FlatFile Source System and select Activate.
Best Regards....
Sankar Kumar
+91 98403 47141

Source System GD1 and Plant 123 combination not allowed

Hello everyone,
I had a requirement to add new values to an already existing variable ssid/plant in my Planning area, so that the user can see these values when he gets to the relevant planning screen. Therefore I made sure that the values did exist in Master Data for plant with the correct source. I do see the new SSID and Plant in the UPSPL screen as well as a part of the dropdown.
When I try to execute the manual planning in BPS0 screen, I get u2018Source System GD1 and Plant 123 combination not allowed.
Can someone please help me in understanding the problem and correcting it .
Thanks,
Raj.

I guess I figured it myself.
After double clicking on the planning area, I go into the 'Characteristic Relationships' and look for the relevant combo (in my ex: Ss and plant) and looked for the FM that validates the combo and add specific entries I am looking for.
Thanks,
Raj

Problem BW : DTP lost source system mapping and new one created?

Similar Messages

Maybe you are looking for