Problem by jumping back to first view

Hi ,
I have implementiert 3 views in a window. The last view has a exit button. When I click the exit button, I can jump back to the first view. But then if I go on from the first view to the second view, the programm is broken, because a 1..1 cardinality of a node has been violated.
If I use exit button to leave the window, it runs good.
It seems that the 1..1 node has been initialized again.
Does any one have a idea how to handle this problem?
best regards

Hi,
I think when u go back to first view you want the node to be empty.
There is one solution in my mind.
When u naviate from 1st view or any view.
Use plugs to pass the right state of each view to the next.
That means in the HANLEINP function reinitialise the node.
I hope it helps.
Plz revert back in case of issues.
Regards,
Sumit Oberoi

Similar Messages

G530 Keyboard problem, cursor jumps back while typing

This has been going on for a while. I will be typing and the cursor will jump back a bit and it will mess up what im typing. Also my touchpad sort of spazzes out now and then. Any help for this? Im running Windows 7.

Hi, I have the same issue with my Y430 Laptop. Can you tell me what helped you to fix this issue?
keeewi wrote:
hello, I have also same problem on my Y430 Keyboard problem, cursor jumps back while typing.
Could you please contact me for how to find right driver to reinstall for touch pad?
Thank you

Transaction Launcher in CRM 7.0 reverts back to CRM view.

Hi Experts,
I have configured all the necessary setting required for transaction launcher but still cannot launch it.
The issue is when i launch it, it directs me to the logon screen of target system (ERP/ECC). Once i give my userid/psw, system thinks for couple of second and the system jumps back to CRM view.
In my case, i'm using transaction launcher to launch VA31 (Scheduling agreement). On executing the launch transaction it is closed immediately and the system reverts back to account identification screen without any error message.
I have created ZTSTC in ECC and checked "synchronous" for method "transaction.execute". Do i need to create ZTSTC in CRM as well?
Thanks
Shree

Hi Shree,
First, you don't need to create ZTSTC in R3/ECC. Create ZTSTC in CRM and make the method: ZTransaction.Execute - Synchronous. Then change the status to 'Released'.
In R3, in /NSE80 create a Display Object, like "ZCUSTOM". In ZCUSTOM create a method. In your case create "ZVA31". In the ABAP tab of the method, check 'Transaction' and in the 'Name' field enter: VA31. Save and release this method and Object.
Now, before you proceed with the next step of seting up SSO (Single Sign On) check if these notes have been followed:
A) Maintain the settings for domain 'CRMD_CIC_ABOX_ITS_BASE_URL' in SE11 as per NOTE: 1337200.
B) Maintain settings for logical systems as per Notes: 1337472 (For R3) and 1337200 (For CRM) logical systems.
After this ensure that the URL for R3 ITS looks like this: http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE
Before creating R3/ECC Transaction launcher links - SSO certificates need to be setup by BASIS.
a.     Import CRT certificate into target system (your CRM client) via Export/Import in STRUSTSSO2
b.     Run SSO2 in target (CRM) and check green lights.
c.     Maintain table TWPSSO2ACL and put in system and client (CRM, XXX)
d.     Activate in SICF /sap/public/bc/its and also sap/bc/gui/sap/its
e.     SE80 -> Internet Services. Look for SYSTEM and WEBGUI and Publish them.
Please try these and let me know if this works for you.
Regards,
Ramesh Nallabelli

When I cull through my images in the filmstrip everytime I use my right arrow and rate a photo it jumps back to the first thumbnail and i have to arrow all the way back to where I left off. Is this a setting issue

When I cull through my images in the filmstrip everytime I use my right arrow and rate a photo it jumps back to the first thumbnail and i have to arrow all the way back to where I left off. Is this a setting issue

Art,
I am trying to follow your very precise steps, and in my case (PSE11 also, Win7), the focus stays on the edited picture after I return from the editor to the Organizer. I am pretty sure that in the previous post describing your situation, I was able to reproduce the problem, but I don't remember on which version. I just tried in 'Folders' view mode to edit in a selected folder, then I clicked 'All media' so that no folder was selected. Same result in both cases.
Even if you prefer to work in folders view, you could take advantage of the ability to use 'albums'. It's a misleading word to describe a selection, a 'collection' of pictures, which you can sort as you want. It's a kind of 'playlist' like with music items. In the organizer, you can select a folder and create an album (even a temporary one) just by choosing 'create instant album'. Suppose you have made an album from a folder or a selection of highlighted pictures to edit. You can order them in date order, import batch or 'custom' order'. Since PSE12 you can also sort them in filename order. You should never lose the 'focus' on your last edited picture when coming back from the editor to the organizer. If the purpose of that album is only to help in organizing an editing session, you simply delete the album (the playlist) if you don't want to keep the list afterward.
I hope someone will be able to confirm how that can happen...
Edit;
I have just read Brian's post.
That may be the difference...

I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

Is the menu bar missing (the one containing File, View, Edit etc)? If it is, the following link shows how to restore it - https://support.mozilla.com/kb/Menu+bar+is+missing

Youtube playback problems, Video freezes and audio jumps back..

Hello,
since a few weeks I have a strange problems when I am watching videos on youtube. At the beginning the playback works fine, audio and video.. but then the video freezes, and at the same time the audio jumps back for few seconds... when then the audio is again at the same time position where the video freezes, the video continues normal... this happens about 1-4x times per video.
I have already uninstalled the flashplayer, updated to the neweset version and also resetted the complete safari browser. All of this does not solve the problem...
Looking forward to any helping idea.. THANKS!!

Go step by step and test.
1. System Preferences > Other/ Flash Player > Advanced > Delete All
     Press the "Delete All" button
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    Follow the prompts.
    Quit Safari.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
    Press " Manage Website Settings" button for more options.

In the previous Firefox, I could bring up a list of pages viewed within a tab, so could quickly jump back several pages, but I can't find this now.

In the previous Firefox, I could bring up a list of pages viewed within a tab, so could quickly jump back several pages, but I can't find this now.

You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

Re-Tweeting in Twitter makes Feed jump back several tweets back or to beginning of feed.

After opening eight links from my Twitter Feed, Firefox jumps back towards the previous 10-15+ Tweets that I previously viewed, I am using nightly (21.01A 2013-01-30) and in previous revisions it was much worse, like in 17.01 it would refresh the Twitter Feed
This Behavior does not occur in any other "Major" Browser for Linux, but this is not specifically Platform "agnostic" as it happens on ubuntu, arch, opensuse ,Gentoo, even the more "Enterprise" oriented distro's such as FreeBSD and RHEL
As I have them on all different machines, using the above mentioned OS'es
Also, to add I see that I am getting(as another certain poster in this forum) the dreaded "your Twitter account is not allowed to perform this action" in Firefox, but it only seems to be for certain Random Retweets I attempt...

You are using Firefox Nightly, we don't have much people that specialize in it. You can try clearing cache and cookies and resetting Firefox but if that does not work I would suggest reporting a bug. Here are the steps;
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Create an account if you don't have one already and report your bug here: https://bugzilla.mozilla.org/ but please do the above before reporting.
Thanks!

Help with actionscript to make page jump back to top

Ok so I wanted the page to jump back to the top when the
buttons are pressed. I found some help in an old thread. It worked
great but for the first button only that i put the script on. All
the others don't work at all. Even if its the same button just on a
different frame. Not sure what i am doing wrong at all. I really
don't know anything about actionscript so if anyone can please help
me. Below is the script that i added to the tree buttons and the
script i added to the html code.
thanks- joe
Button1:
on (release) {
nextFrame();
import flash.external.*;
flash.external.ExternalInterface.call('pageTop');
Button2:
on (release) {
gotoAndStop(1);
import flash.external.*;
flash.external.ExternalInterface.call('pageTop');
Button 3:
on (release) {
prevFrame();
import flash.external.*;
flash.external.ExternalInterface.call('pageTop');
At the top of my html:
<head>
<script http-equiv="Content-Script-Type"
content="text/javascript">
function pageTop() {
window.scrollTo(0,0);
</script>

you don't need all the import statements but the problems are
likely caused by your buttons failure to exist when the timeline
goes to the frame indicated in the line above the externalinterface
call().

App crashing when going back to previous view

I've got my app. which has several views. in my 3rd view, i have a list of questions with yes/no answers the answers to which I'm saving to a plist. it was working all good. but then i added a first view with a table which has 4 options, clicking on either of these rows go to the same view but each of them change the value of the variable in my singleton class, which then decides which questions are added to the 3rd view. so this helps me to jus have one view but the variable controls the different questions. Now my problem is that if i change something in my 3rd view, for eg, i choose yes/no , then when i am going back to the main viw , my app crashes. I am not sure why this happens.How does it work anyway-the inherent back button on the navigation bar? im guessing it calls the viewdidload function for the first/second view when going back to them from the first view, i dont undrstand why it crashes, coz the viewdidloads of these views seem okay to me.
thanks

write the piece of code causing the crash or paste the output on the console to get to know what actually cause your application to be crashed.

Video goes back to first image

Hello all
I have a prob with a video mpg4 that plays in the first page of my stack, i have added a jpg sequence to play automatically at the end of the video, to stop the video that play inside the page (1024/768)
It plays well
but as soon as i swipe down and navigate into the below page (read other video and scrollable text), then when I come back the first page of my stack the video has go back to its first image (rather than stay with the last image of the seuquence image)
I hope I am clear
I have try everything, even use a whole animation in jpg sequence (which is more heavy than a MPG4) but here again it goes back to the first image as soon as I navigate to the below page
Any idea?
BTW it works well in the desktop viewer

The problem here could be related to the MSO timing issues that are fixed in the Viewer Builder viewers but not in the store iPad viewer. If you can create a custom Adobe Content Viewer, it should work. Or, wait for the store viewer to be approved (any day now).
You might want to look at Keith Gilbert's article about stopping a video on the last image: http://blog.gilbertconsulting.com/2011/09/dps-stop-video-at-last-frame.html

Trying to jump back to a previous slide if a question is missed

This is just the first of many questions I'm gonig to have, but the one that's bugging me the most right now.
I'm running Captivate 6 (32 bit) and I am trying to have a sort of review section after each portion of my training video. What I want is for the person answering the questions in the review section to have three chances to answer the question. If they get it wrong 4 times, I want the project to jump back to the slide the information they didn't retain was on. I would also like to make it to where, on second viewing of this slide, they can return to the quiz question. I'm assuming this would require making a new, hidden slide?
Thank you anyone for your help. I'm going on a five day vacation in about 15 minutes, so I may not check on this right away, but please know that finally getting this to work is going to absolutely make what is sure to be a miserable Monday . Happy holidays for those in the states!

Hi ,
What I can understand that you have following project model.
Content Slide section A
Content Slide section A
Content Slide section A
Content Slide section B
Content Slide section B
Content Slide section C
Content Slide section C
Quiz Section A - 3 attempts
Quiz Section B - 3 attempts
Quiz Section c- 3 attempts
on first time you want normal flow mentioned above and if suppose user has failed quiz section A , he/she should go to Content section A and then directly jump to quiz section A rather than going to other section.
To achieve this define a user variable a, assign default value =0, now on the last content slide of particular section you have to set on exit action -> execute conditional advance action
if a=0 then continue else 'Return to Quiz'
now on quiz section A you have to set success failure actions:
Success -> Assisn a = 0;
Failure-> Execute advance action ( Assign a=1 and Jump to respective content slide.)
Please let me know if this helps.
Regards,
Avinash

Always jumps back to special characters like ü,ö,ß

hello,
so i have been having problems with my macbook pro recently. it has a US keyboard but i write a lot in german so i have to use special characters like ä,ü,ö,ß which normally is not a problem, because i can just stay longer on the a,u,o,s keys and it works perfectly. however, recently when i was typing one of the special characters a lot of the time it jumped back to the previous one i had typed a couple of words back.
this is really really annoying and i do not know what i can do about it or what i am doing wrong.
it would be awesome if somebody knows a way how to fix this problem.
thank you for your help!

Hi,
Unicode or Non-Unincode System ?
Displayed where ? SAPGUI ? Print Preview ? Spool-Display ?
And how is the XML file written ? OPEN DATASET ? BAPI ?
At all of these stages it might be either that it is only a display system, like the selected display CHARSET in SAPGUI, when it is a non-unicode system, or simply not coded correctly like OPEN DATASET without specifying the cdepage when necessary.
And it might even be, that even "displaying" the XML File is simply done with the incorrect codepage while the data inside the file is correct.
If you are on Windows, you might even face funny results when saving a simple textfile from notepad with ANSI/DOS and both Unicode variants and then go to CMD.EXE ans simply "type" the content.
All 4 results will be different, allthough notepad will display the same stuff.
So first of all, makes sure which codepage is relevant at all stages from DB-table to "display"
- DB-Charset
- SAP system type (unicode/non-unicode)
- SAP codepage (1100 / 410x )
- crosscheck the test from report RSCPINST
- Codepage on Windows running SAPGUI
- Selected codpage for Sapgui
Good hunting
Volker

My iPad jumps back to the desktop when using a page or app

My iPad (original) jumps back to the desktop when using Safari or an app. Any fixes? This is my second original iPad. The first one did the same thing.

If you're stuck within an app or you've noticed a problem, simply hold both the home button and sleep/wake button at the same time. It's important to keep your fingers on these buttons until step 3.
After a few seconds the red ‘slide to power off' screen will appear, simply ignore this. Ensure your fingers are still holding down the home and sleep/wake switch.
Shortly after you should see the Apple logo, it's now safe to let go of the iPad's buttons. Your iPad should now boot, beware this process can take up to 10 minutes or so.

HT5100 iphone 4 update removed data from almost a year back after first syncing then upgrading? Why Why Why!! and How do I get it back?

Is there anyway to get the lost data back?

First, see if the update is gone, or not being utilized:
The iPod touch January Software Upgrade can only be synced to iPod touch from the primary iTunes library. If the user is manually managing music and video on iPod, this is the computer where they first set up the iPod or first set it up after restoring the iPod. The "iPod touch App Pack 4A93.ipa" file can be copied from the computer where you purchased it to your primary iTunes library computer, and sync the iPod from there.
The file is located here:
Mac OS X:
~/Library/iTunes/Mobile Applications
Windows XP
C:\Documents and Settings\[user name]\Application Data\Apple Computer\iTunes\Mobile Applications\
Windows Vista:
C:\Users\[user name]\AppData\Roaming\\Apple Computer\iTunes\Mobile Applications\
Note: These locations are hidden by default in Windows. You can these locations by choosing "Show hidden files and folder" in the View tab of the Folder Options Control Panel.
Now, if you can't get this to install, you can try to set your Touch to automatically sync instead of manually sync.
If that doesn't do it, login to your iTunes store account within iTunes, goto your account, and select "report problem"
They should be able to help you with the downloads and the update from there.
Scott

Problem by jumping back to first view

Similar Messages

Maybe you are looking for