Problem by opening Data Orchestration Admin and Monitoring Tool

Hi all,
Using SAP NetWeaver Mobile (7.1) only
You can access the SAP NetWeaver Mobile Administrator through the DOE. To do this, you must log on to the DOE and choose Data Orchestration Engine ® Data Orchestration Admin and Monitoring Portal.
When the Browser opened, i dont get any information, there comes "The page cannot be displayed"
But under DOE SETUP AND REPAIR i have installed all packages.
I have installed the SAP Netweaver AS ABAP 7.1 newly, so is there a step which i forget?
i hope you can help me
thanks
hassan

So i have activate all the services, but there comes the same page.
There is no fault number...
This is the url:
http://sapnw71:0/sap/bc/webdynpro/sap/sdoe_administration?sap-client=000&sap-language=EN
What is with this port? Could that be possible?
The page looks like this...
The page cannot be displayed
The page you are looking for is currently unavailable. The Web site might be experiencing technical difficulties, or you may need to adjust your browser settings.
Please try the following:
Click the Refresh button, or try again later.
If you typed the page address in the Address bar, make sure that it is spelled correctly.
To check your connection settings, click the Tools menu, and then click Internet Options. On the Connections tab, click Settings. The settings should match those provided by your local area network (LAN) administrator or Internet service provider (ISP).
See if your Internet connection settings are being detected. You can set Microsoft Windows to examine your network and automatically discover network connection settings (if your network administrator has enabled this setting).
Click the Tools menu, and then click Internet Options.
On the Connections tab, click LAN Settings.
Select Automatically detect settings, and then click OK.
Some sites require 128-bit connection security. Click the Help menu and then click About Internet Explorer to determine what strength security you have installed.
If you are trying to reach a secure site, make sure your Security settings can support it. Click the Tools menu, and then click Internet Options. On the Advanced tab, scroll to the Security section and check settings for SSL 2.0, SSL 3.0, TLS 1.0, PCT 1.0.
Click the Back button to try another link.
Cannot find server or DNS Error
Internet Explorer

Similar Messages

Data Orchestration Admin and Monitoring Portal

Hi Experts,
By accessing the SAP NetWeaver Mobile Administrator through the DOE. Then I log on to the DOE and choose "Data Orchestration Engine -> Data Orchestration Admin and Monitoring Portal." Then an IE pop up with URL "http://<hostname>:0/sap/bc/webdynpro/sap/sdoe_administration?sap-language=EN".
but the following message appears on the IE,
"Internet Explorer cannot display the webpage...".
I am using MI7.1SP1
Please advise.
Thank you.

Hi Siva,
In tcode: SICF, At 'Virtualle Hosts/ Services' column I expanded the default_host -> sap -> bc -> webdynpro -> sap -> sdoe_administration, then right click 'activate' and then right click again 'Test Service' and I get the message,
http://<host-name>:0/sap/bc/webdynpro/sap/doe_administration?sap_client=001
Application not found.
The "Data Orchestration Engine -> Data Orchestration Admin and Monitoring Portal." IE still display the same message.
Please advise further.
Thank you

Problem in retrieve data in COSS and COSP from PBS using FM /pbs/select_in

hi all i have problem in retrieving data from COSP and COSS tables from PBS using FM /pbs/select_into_table in this FM i couldn't find the tables if any body knows pls reply back with the Archiving object to be use and parameters to be used.

That are controlling tables-
Have you installed PBS for Controlling ?
try http://www.pbs-bensheim.de/
A.

"locked" users open to non-admin and guest users

I had this problem a while ago and did a work around that worked.
When I am on guest or other non-admin users accounts and open hard drive and then users I can access files that should be locked. Mine is the only acct that has a Red slashed circle thru it. My wife's account is also admin but the red circle slashes show up past her icon and some of her folders are open.
The last time this came up I dragged her open files into the redslashed document file and everything was fine.
But now my son's file is open to all and this computer is used by many.
When I do the get information and try to change anything in there I get a message of unexpected error and operation could not be completed message error code 120
I get this when I try to get information using my admin acct., his non-admin account, or the guest account. Sometimes it asks me to authorize and then an error now it goes right to error
And the group is listed as admin and read only so it should not be open to all?
Thanks for you help again with these, to me , befuddling problems
Barry

Hi Barry, you need to Repair the HD 1st off with that error code 120 = HFS "Directory not found".
"Try Disk Utility
1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Then we can work on the other problems, if Disk Utility or fsck should fail to repair it, your best bet is DiskWarrior from Alsoft, you'll need the CD to boot from if you don't have another boot drive...
http://www.alsoft.com/DiskWarrior/

Problem with "Insufficient data for image" and embedded JPEG 2000 Images

I frequently download pdf from the http://www.glorecords.blm.gov web site. They are reporting a problem with Reader Reader 10.1.4 and the pdf files they have.
"("Insufficient data for image" and embedded JPEG 2000 Images)"
I am experiencing the same "Insufficient data for image" error when opening their downloaded pdf and viewing in ACROBAT X 10.1.4.
Can someone address this please?
Win 7 sp1

Read this:
http://blogs.adobe.com/dmcmahon/2012/08/21/acrobat-insufficient-data-for-an-image-error-af ter-updating-to-10-1-4-or-9-5-2/

Problem in opening 'Find Service Request' and 'Create Service Request' HTML forms

Hi,
I am working on creating some date for EBS Service, and I am unable to open 'Find Service Request' and 'Create Service Request' HTML forms.
I keep getting the error message :
Oracle error - 20001: ORA-20001: APP-FND-02902: Multi-Org profile option is required. Please set either MO: Security Profile or MO: Operating Unit profile option. has been detected in MO_GLOBAL_INIT.
I have min knowledge of EBS set up and configuration. We just use EBS as a source system for our ETLs. Please suggest any workaround to get resolve the issue.
Thanks,
Kishore

Navigate to System Administrator responsibility > Profile > System. Search for the profile MO: Operating Unit and under responsibility field, put in the responsibility name you are using for creating the service request, click OK and enter the desired operating unit value in the next window. It pulls up all operating units defined and you can chose the desired one.
Thanks
Shree

Problem with reading data from screen and inserting in table

hi ther,
im new to abap-webdyn pro. can anyone suggest how to read data from screen and insert into table when press 'ADD' button.
i done screen gui , table creation but problems with action. what the content of acton add.
is ther any link that helps me or tut??
thankx in advance!
regards

Hi,
Create a context node for the screen fields for which you want to enter the values with cardinality 1.1.....
Now in the layout of your view bind the screen input fields to that context node(attributes) to the value property of the input fields...
Now in the action of ADD button....
--> go the wizard and select the read node button and select the node which you have created it generates the auto code for you.....
for example if the node is contains aone attribute like MATNR
reading the node from wizard will generate the code as....
DATA lo_nd_matnr TYPE REF TO if_wd_context_node.
DATA lo_el_matnr TYPE REF TO if_wd_context_element.
DATA ls_matnr TYPE wd_this->element_matnr.
DATA lv_matnr TYPE wd_this->element_matnr-matnr.
* navigate from <CONTEXT> to <MATNR> via lead selection
lo_nd_matnr = wd_context->get_child_node( name = wd_this->wdctx_matnr ).
* @TODO handle non existant child
* IF lo_nd_matnr IS INITIAL.
* ENDIF.
* get element via lead selection
lo_el_matnr = lo_nd_matnr->get_element( ).
* @TODO handle not set lead selection
IF lo_el_matnr IS INITIAL.
ENDIF.
* get single attribute
lo_el_matnr->get_attribute(
    EXPORTING
      name = `MATNR`
    IMPORTING
      value = lv_matnr ).
here the variable lv_matnr will contain the entered value......
now you can use this value for further process.
Thanks,
Shailaja Ainala.

Problem with embedded data-sources.xml and custom UserManager

Hi all,
Our application uses a custom UserManager, which is basically extended from the JDBC UserManager, declared as follows in orion-application.xml:
     <user-manager class="com.infocorpnow.a2g.security.oracle.A2GUserManager">
          <property name="table" value="pos.users" />
          <property name="userNameField" value="username" />
          <property name="passwordFiled" value="password" />
          <property name="dataSource" value="jdbc/A2GDS" />
          <property name="groupMemberShipTableName" value="pos.user_roles" />
          <property name="groupMemberShipGroupFieldName" value="role_name" />
          <property name="groupMemberShipUserNameFieldName" value="login_id" />
     </user-manager>
Since we want to be able to deploy the application several times on the application server, and therefore have each deployment of the ear point to its own datasource (i.e. its own local "A2GDS"), we've found out how to embed data-sources.xml inside the EAR file we're deploying, and modify the orion-application.xml as follows:
     <data-sources path="./data-sources.xml" />
And then place data-sources.xml in the same meta-inf folder as the orion-application.xml.
This has worked fine when deploying to the standalone OC4J.
Now when I try to deploy the exact same EAR file in Oracle 9iAS, and I get to the User Manager screen, the Custom User Manager does not show up correctly. It did show up prior to me embedding the data-sources.xml. Please help? This is fairly urgent.
Thanks
Jason

I should also mention I'm using the Java Edition of 9iAS R2 (9.0.3 container) on Solaris.

Admin and Monitoring BPE and EQB

Hi,
I am in need of Administration of Integration Processes and Monitoring the Business Process Engine Docs.
And
How Event Queue Browser can be used ?
Pls help.
Thanks,
Ram

Hi,
monitoring BPm https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Performance of BPM
BPM Performance tuning
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
Also see the below links regarding BPM
check list for BPM
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Regards
Chilla

SAP administrator and monitoring tools

Hello,
I'm student at the university of montreal and i am for the moment in internship in a media enterprise as a consultant. They Use SAP business one for the management. I've somme difficulties at the moment to manage it as i would like. Is there some monitoring tools to help me administrate the SAP system like analyse the database and edit faster and easier my acces list and avoid repetitive action ( automatization) for exemple.
Thank you very much for you're answers.

Hello Alicia
As already recommended in the other thread you opened:
Remote Support Platform may be helpful for your needs. Following document describes some of its features:
Remote Support Platform (RSP) and its benefits
You may be able to find RSP installation package in the SBO instalation CD provided by the partner in following route:
Packages\Remote Support Platform\Remote support platform for SAP Business One
Regards

Data Quality Admin and Client on Windows 7 Issue

Hi,
I am experiencing a strange behaviour of Data Quality two shortcuts referring to admin.exe and discovery.exe .
I get the program running only if I right click on the original installed shortcut (running as administrator). The will not work neither if the shortcut is copied anywhere else nor if the shortcut is got from the start menu after a search in the bottom box. The problem seems related to the compatibility. If I do not launch the binaries using the "troubleshoot compatiibilty" also the binary itself will not start.
Tried to save the settings to run in XP compatibility mode but this is not honored.
Someone else fixed this?
Thanks
Fabio D'Alfonso

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
The quickest solution might be to try to reinstall followed by another uninstall, or to use the Windows Install Cleanup Utility, (although Microsoft has removed it from their support site with the following disclaimer).
Notice
This article previously contained a link to the Windows Installer Cleanup utility (MSICUU2.exe). If you were directed to this article to solve a problem installing a product other than Microsoft Office, please contact your software manufacturer for installation support on the product.
While the Windows Installer Cleanup utility resolved some installation problems, it sometimes damaged other components installed on the computer. Because of this, the tool has been removed from the Microsoft Download Center.
Nonetheless, here is an active link and basic instructions:
http://majorgeeks.com/download.php?det=4459
1.     To use the Windows CleanUp utility, follow these steps:
a.     Click Start, point to Programs, and then click Windows Install Clean Up.
b.     Select the program that you want to remove, and then click Remove.
c.     Click OK, and then click Exit.
If these suggestions do not help, then perhaps a case should be opended with TAC and they could assist with gathering the installer log files.
-ken

Problem With Open Data sets

Hi frnds,
Problem details: We have to read file from applicaitn server, In the file data its having tab spaces between fields . when i m trying to read the file, Data is comming but , inthe place of Spaces its giving special character "#"..
please help me on that
Thanks,
Rohini

* Lets open the file on App. server to read the records
OPEN DATASET V_FILE FOR INPUT IN TEXT MODE ENCODING DEFAULT."" WITH SMART LINEFEED.
* if the file is
found and we can read the records
IF SY-SUBRC = 0.
DO.                                                " 1 TIMES.
CLEAR : V_ZTMAT_MASTER_IB,
                        V_MATERIAL ,
                            V_PLNTID ,
               V_LOCATN ,
               V_MAKTX ,
               V_MEINS ,
               V_MATKL1.
READ DATASET V_FILE INTO V_ZTMAT_MASTER_IB.
IF SY-SUBRC <> 0.
EXIT.
      ELSE.
*       As the data is read as a single line into a variable, split the data into respective fields of the internal table.
SPLIT V_ZTMAT_MASTER_IB AT C_COMMA INTO:
V_MATERIAL
V_PLNTID
                                               V_LOCATN
                                               V_MAKTX
                                               V_MEINS
                                               V_MATKL1.
* Check it the split is succesful or not. If not send email.
        IF SY-SUBRC <> 0.
CLEAR WA_CONTENTS_TXT.
          CONCATENATE 'The file : ' V_FG_FILE ' , is not TILDE Delimited. Please check the file where material number is ' V_MATERIAL
                        ' Thanks. ' INTO WA_CONTENTS_TXT .
          APPEND WA_CONTENTS_TXT TO TB_CONTENTS_TXT.
          CLEAR WA_CONTENTS_TXT.
        ELSE.
*        Check if the correct data type is being passed or else send an email...
          CATCH SYSTEM-EXCEPTIONS
           ARITHMETIC_ERRORS = 1
           CONVERSION_ERRORS = 2.
            V_SNO = V_SNO + 1.
            MOVE :   SY-MANDT   TO WA_ZMATERIALMASTER1-MANDT,
                     V_SNO      TO WA_ZMATERIALMASTER1-SNO,
                     V_STATUS   TO WA_ZMATERIALMASTER1-STATUS,
                     V_MATERIAL TO WA_ZMATERIALMASTER1-MATERIAL,
                     V_PLNTID   TO WA_ZMATERIALMASTER1-PLNTID,
                     V_LOCATN   TO WA_ZMATERIALMASTER1-LOCATN,
                     V_MAKTX    TO WA_ZMATERIALMASTER1-MAKTX,
                     V_MEINS    TO WA_ZMATERIALMASTER1-MEINS,
                     V_MATKL1   TO WA_ZMATERIALMASTER1-MATKL.
            APPEND WA_ZMATERIALMASTER1 TO TB_ZMATERIALMASTER1
ENDCATCH.
          IF SY-SUBRC = 2.
            V_SUBJECT1         = 'Subject : Z_ROHINI_ASSIGNMENT_4A'.
            V_ATTACHMENT_DESC1 = 'Z_ROHINI_ASSIGNMENT_4A: Error'.
            V_EMAIL1          = P_RECVR.
            V_SENDER_ADDRESS1 = P_SENDR.
            V_MTITLE1         = 'File error: Data type is diferent than expected in file'.
            V_FG_FILE1 = V_FILE.
            CONCATENATE 'In the file : ' V_FG_FILE1 ' ,    data type is diferent than expected. Unable to move record(s). Please check the file where material number is ' V_MATERIAL '.   Thanks.' INTO WA_CONTENTS_TXT1.
            APPEND WA_CONTENTS_TXT1 TO TB_CONTENTS_TXT1.
          ENDIF.
*          ENDLOOP.
        ENDIF.
      ENDIF.
    ENDDO. " END OF OPEN DATASET DO
*   Archiving Flat File
    PERFORM MOVE_FLATFILE.
ENDIF. " END OF OPEN DATASET SY-SUBRC IF...
CLOSE DATASET V_FILE.

[SOLVED]Opening Obmenu as admin and general permissions issue

Hey guys
i did a new arch install with all the basics, sudo, and openbox. when i go into a terminal to open obmenu as an admin using sudo and whilst logged in as root, i get the following
I did cp all the xdg data menu.xml rc.xml and autostart to my home folder/username/.config/openbox
** (process:2920): WARNING **: Trying to register gtype 'GMountMountFlags' as enum when in fact it is of type 'GFlags'
** (process:2920): WARNING **: Trying to register gtype 'GDriveStartFlags' as enum when in fact it is of type 'GFlags'
** (process:2920): WARNING **: Trying to register gtype 'GSocketMsgFlags' as enum when in fact it is of type 'GFlags'
No protocol specified
/usr/lib/python2.7/site-packages/gtk-2.0/gtk/__init__.py:57: GtkWarning: could not open display
warnings.warn(str(e), _gtk.Warning)
Error: "/root/.config/openbox/menu.xml" not found
Last edited by nankura (2012-07-18 11:48:51)

uh, owner is read and write, group read only and the other read only, and the owner is set to root not my username, so i think ive missed something extremely vital when using the useradd script during the arch installation
maybe i put a group i shouldnt have in the additional groups. either way. it seems i dont have permissions as my actual user "nankura"
i cant even change the permissions
Last edited by nankura (2012-07-18 10:36:15)

Problem in printing data in main and secondary windows.

Hi,
I have embedded tables in main window and secondary window, which are supposed to print the same data.
The table in the main window is printing correctly even if the data over flows, but there is a problem with the secondary window in printing the table.
when the data over flows , it starts printing the same from the first line and so the data in both the windows do not match, so kindly help me fix this issue.

Hi,
I have a possible approach. Just try and update accordingly.
While the data in main window prints, append a temporary table of same type inside the Main area. Now let the secondary window be of exact size as that of main window and copy-paste the same table node inside this window, but changing the table name (Loop at ITAB into WA) to the new table name, appended in main area, leaving everything else unchanged.
Now inside the temporary table loop in secondary window, create program lines and just refresh that table when number of entries in table equals sy-tabix or just set a flag for same and refresh table in footer.
Thus if main window prints 10 entries, then these will be appended in another table. The same 10 entries will be printed again in secondary window and while at last entry, table will be refreshed, thus ready for appending new entries from next page's main window.
Hope this helps.
Karthik

Problem after storing data in Storage and trying to read it

Hi all,
I have a problem with reading the data from a Storage file I created. The code folows:
public var storage: Storage;
public var prop: Property;
public var props: Property[];
var initialized: Boolean = false;
public function initiliazeDatabase(): Boolean {
storage = Storage {
source: "test.db"
var resource: Resource = storage.resource;
var inputStream: InputStream = resource.openInputStream();
readData(inputStream);
println("Initilatization done!!!");
println("size: {sizeof props}");
return initialized;
function initStorage() {
println("Initializing Storage");
var out = storage.resource.openOutputStream(true);
var dummyRoot = "<prop></prop>\n";
out.write(dummyRoot.getBytes());
out.close();
initialized = true;
function parseCallback(e: Event) {
if (e.type == PullParser.START_ELEMENT) {
if (e.qname.name == "prop" and e.level == 0) {
prop = Property { };
} else if (e.type == PullParser.END_ELEMENT) {
if (e.qname.name == "prop" and e.level == 0) {
insert prop into props;
} else if (e.type == PullParser.TEXT) {
if (e.qname.name == "name" and e.level == 1) {
prop.name = e.text;
if (e.qname.name == "value" and e.level == 1) {
prop.value = e.text;
public function addProp(name: String, value: String): Void {
prop = Property {
name: name;
value: value;
insert prop into props;
public function storeData(): Void {
var out = storage.resource.openOutputStream(false);
for (prop in props) {
out.write(prop.toXml().getBytes());
out.close();
public function readData(inn: InputStream): Void {
var parser = PullParser {
input: inn;
onEvent: parseCallback;
try {
parser.parse();
initialized = true;
} catch (npe: NullPointerException) {
initStorage();
Now, for the first time, the app works as it should, the Storage is initialized (if it does not exist) and the required fields are stored in it when I need to.
However, the next time I start the application I get the following error:
Exception in thread "AWT-EventQueue-0" java.lang.ExceptionInInitializerError
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.sun.javafx.runtime.provider.GUIRuntimeProvider$1.run(GUIRuntimeProvider.java:65)
at com.sun.javafx.tk.swing.SwingToolkit$StartupRoutine.run(SwingToolkit.fx:582)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: com.sun.javafx.data.pull.impl.StreamException: [20,1] Syntax Error in prop
at com.sun.javafx.data.pull.ukit.xml.ParserStAX.panic(ParserStAX.java:1516)
at com.sun.javafx.data.pull.ukit.xml.ParserStAX.next(ParserStAX.java:400)
at javafx.data.pull.PullParser.next(PullParser.fx:319)
at javafx.data.pull.PullParser.parse(PullParser.fx:258)
at com.gpsbuddy.utils.DatabaseUtils.readData(DatabaseUtils.fx:86)
at com.gpsbuddy.utils.DatabaseUtils.readData(DatabaseUtils.fx:86)
at com.gpsbuddy.utils.DatabaseUtils.initiliazeDatabase(DatabaseUtils.fx:30)
at com.gpsbuddy.utils.DatabaseUtils.initiliazeDatabase(DatabaseUtils.fx:30)
at com.gpsbuddy.main.Main.<clinit>(Main.fx:21)
at com.gpsbuddy.main.Main.<clinit>(Main.fx:21)
I did check the muffin file and it has no errors in it...
Thanks in andvance...

Well, as it appears, the second part of the exception was right.. :P... I do have problem with the XML file.. for some reason I cannot have two <prop> tags in one document?
For example, if I have <prop></prop>, the program start ok... but when a new prop is added, for example, <prop></prop><prop></prop>, I get the error from the previous post?
Does anybody know anything about this? Could this be an error in the parser, or I am missing something?
Edited by: jonycus1 on Feb 25, 2010 3:10 PM

Problem by opening Data Orchestration Admin and Monitoring Tool

Similar Messages

Maybe you are looking for