Problem calling Oracle's procedure in Chain

Hi
In chain I call Oracle's procedure using ABAP code:
======================================
REPORT ZETL_MAIN.
DATA: p_err_code TYPE i,
p_msg(1000) TYPE c.
EXEC SQL.
EXECUTE PROCEDURE ETL.MAIN (OUT :p_err_code, OUT :p_msg)
ENDEXEC.
IF p_err_code = 0.
MESSAGE p_msg TYPE 'I'.
ELSE.
MESSAGE p_msg TYPE 'E'.
ENDIF.
============================================
Every time after I change procedure, compile it
and run chain for the first time, I recieve error.
Doing nothing, I run chain the second time and it is
completed with success.
Does anybody know the reason of it ?
Regards
PWnuk

Hi,
The addition %ERRCODE is exclusively designed for internal use. It is no longer available as of Release 6.10
please see the note 364707
May be you can change code this way
EXEC SQL.
EXECUTE PROCEDURE
sap_distr_utils_pkg.get_info_cli_prc(
in :w_kunnr,
out :nome1 )
ENDEXEC.
IF SY-SUBRC ne 0 OR nome1 ne 347.
WRITE: / 'Wrong result for EXECUTE PROCEDURE:', nome1.
ENDIF.
a®

Similar Messages

Problem Calling Oracle Stored Procedure From JAVA

Hello all. I've been banging my head against this all day:
Here's the procedure I'm calling:
GetIDsByLatLonRadius(inLatitude IN NUMBER,
inLongitude IN NUMBER,
inRadius IN NUMBER,
inTableName IN VARCHAR2,
inIDColName IN VARCHAR2,
inLatColName IN VARCHAR2,
inLonColName IN VARCHAR2,
LocationIDs OUT HomesCom_Types.GenericCursorType,
ErrorNo OUT VARCHAR2);
And here's the JAVA code:
public Hashtable GetInRadius(Hashtable inStruct)
ResultSet locationIDs = null;
Hashtable outputHash = new Hashtable();
float latitude = (float) 30.429;
float longitude = (float) -84.2585;
float radius = (float) 10;
try {
CallableStatement proc = con.prepareCall("{ call GEOCODING.getidsbylatlonradius(?,?,?,?,?,?,?,?,?) }");
proc.setFloat(1,latitude);
proc.setFloat(2,longitude);
proc.setFloat(3,radius);
proc.setString(4,"demographics_school");
proc.setString(5,"onboard_id");
proc.setString(6,"geocoding_latitude");
proc.setString(7,"geocoding_longitude");
proc.registerOutParameter(8,OracleTypes.CURSOR);
proc.registerOutParameter(9,OracleTypes.VARCHAR);
proc.execute();
locationIDs = (ResultSet) proc.getObject(1);
if (locationIDs != null)
outputHash.put("query",locationIDs);
else
outputHash.put("query","LOCATION ID WAS NULL");
catch(SQLException sqlException) {
System.out.println(
"The following error occured in reading " +
"from the table: "
+ sqlException);
outputHash.put("error",sqlException.getMessage());
return outputHash;
This catches and the sqlException I get is: Unhandled sql type
I'm not a java expert and I'm completely stuck at this point, so I figured a few more eyes on it might help.
Thanks in advance,
Danny

Danny,
Don't print merely the error message, print the whole stack trace.
Then post it here.
What java version are you using?
What JDBC driver and version are you using?
What Oracle database version are you using?
Is the code from a Java ServerPages (JSP) or from a Java Stored Procedure (JSP)?
I guess "HomesCom_Types" is one of your PL/SQL packages or routines, right?
If so, then you can't use it in JDBC, you must define a database type using the command:
create or replace type ...But in later versions of the Oracle database, the REF CURSOR type is built-in.
Check the Oracle documentation for more details.
Good Luck,
Avi.

Getting error while Calling Oracle Stored Procedure with output Parameter

HI All,
From long days i am working on this but i unable to solve it.
Even i have studied so many forums in SAP but i didn't find the solution.
I am calling Oracle Store procedure with 3 inputs and 1 output without cursor.
Store Procedure:-
CREATE OR REPLACE PROCEDURE PDS.send_rm
IS
proc_name           VARCHAR2(64) := 'send_rm';
destination_system VARCHAR2(32) := 'RAWMAT';
xml_message         VARCHAR2(4000);
status_code         INTEGER;
status_message      VARCHAR2(128);
debug_message       VARCHAR2(128);
p_ret               INTEGER;
BEGIN
DBMS_OUTPUT.PUT_LINE( proc_name || ' started' );
xml_message := '<RAW_MATERIAL>'||
                 '<BAR_CODE>10000764601</BAR_CODE>'||
                 '<MATERIAL>1101448</MATERIAL>'||
                 '<VENDOR_CODE/>'||
                 '<PRODUCTION_DATE>0000-00-00</PRODUCTION_DATE>'||
                 '<EXPIRE_DATE>0000-00-00</EXPIRE_DATE>'||
                 '<BATCH/>'||
                 '<PO_NUM/>'||
                 '<MATERIAL_DESCRIPTION>POWER SUPPLY</MATERIAL_DESCRIPTION>'||
                 '<SPEC_NAME/>'||
                 '<STOCK_CODE>BSW-JH</STOCK_CODE>'||
                 '<INSPECTION_LOT>00</INSPECTION_LOT>'||
                 '<USAGE_DECISION_CODE/>'||
                 '<MATERIAL_GROUP>031</MATERIAL_GROUP>'||
                 '</RAW_MATERIAL>';
      dbms_output.put_line('XML '||xml_message);
--      vp_interface.load_rawmat@cnprpt1_pds(SYSDATE, destination_system,
--                   xml_message, p_ret);
      vp_interface.load_rawmat(SYSDATE, destination_system,
                   xml_message, p_ret);
      dbms_output.put_line('Return Code '||p_ret);
      COMMIT;
EXCEPTION
WHEN OTHERS THEN
    status_code := SQLCODE;
    status_message := SUBSTR(SQLERRM, 1, 64);
--    Extract_Error_Logger(proc_name, 'LOCAL', SYSDATE, -999,
--                         status_message, 0, debug_message);
    ROLLBACK;
END send_rm;
And while i am calling this Store procedure in MII, I am facing error.
I have tried different ways but didnt solved
In SQL Query, i kept mode as: FixedQueryOutput
Can anyone tell me or send code for calling above store procedure
And onemore thing, While creating store procedure in Oracle for MII. Do we need to Create output parameter as cursor or normal.
Thanks,
Kind Regards,
Praveen Reddy M

Hi Praveen
Our wrapper was created because we could not modify the procedure we call (it was not returning a cursor).
CREATE OR REPLACE PROCEDURE CHECK_PUT_IN_USE
(STRCMPNAME in varchar2,
STRSCANLABEL in varchar2,
RCT1 out SYS_REFCURSOR
AS
charDispo          Char(1);
charStatus          Char(1);
intCatNo          Integer;
charCatDispo     Char(1);
strCatQual          VarChar2(2);
strCatDesc          VarChar2(30);
strMsg          VarChar2(128);
BEGIN
qa.check_put_in_use@AR(STRCMPNAME,
                                          STRSCANLABEL,
                                          charDispo,
                                          charStatus,
                                          intCatNo,
                                          charCatDispo,
                                          strCatQual,
                                          strCatDesc,
                                          strMsg);
OPEN RCT1
FOR Select charDispo,charStatus,charDispo,charStatus,intCatNo,charCatDispo,strCatQual,strCatDesc,strMsg from Dual;
END;
Hope this helps
Regards
Amrik
then with a FixedQueryWithOutput
call mixar.qasap.wrapper_update_put_in_use('[Param.1]','[Param.2]',[Param.3],?)
Hope this helps.

Calling oracle stroed procedure in C#

hi friends
can anybody tell me how to call oracle stroed procedure in c# when SP return multiple of row or all row from selected table
thnx in advance

Hi monikak,
This is oracle forms forum.
Please post your question in .NET Stored Procedures forum to get fast response.
Navnit

PLS-00306:NET to call Oracle stored procedure,Use Array parameters

Development Environment:Windows 2003 SP2+Oracle 10g
. NET to call Oracle stored procedure, use an array of types of parameters
Step1：(In the Oracle database define an array of types)
CREATE OR REPLACE TYPE STRING_VARRAY AS VARRAY (1000) OF NVARCHAR2(255)
OR
CREATE OR REPLACE type string_array is table of nvarchar2(255)
Step2：
CREATE OR REPLACE PROCEDURE Test
(i_test in string_varray,o_result out int)
IS
BEGIN
o_result:=i_test.count;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
NULL;
WHEN OTHERS
THEN
o_result:=0;
END arraytest;
Step3：
ODP.NET(Oracle 10g)
OracleConnection conn = new OracleConnection("User Id=test;Password=test;Data Source=test");
OracleCommand cmd = new OracleCommand("Test", conn);
cmd.CommandType = CommandType.StoredProcedure;
string[] str = new string[2] { "11", "222" };
cmd.ArrayBindCount=2;
OracleParameter p1 = new OracleParameter("i_test", OracleDbType.NVarChar);
p1.Direction = ParameterDirection.Input;
p1.CollectionType = OracleCollectionType.PLSQLAssociativeArray;
p1.Value = str;
p1.ArrayBindSize=new int[2]{2,3};
p1.ArrayBindStatus = new OracleParameterStatus[2]{
OracleParameterStatus.Success,
OracleParameterStatus.Success
cmd.Parameters.Add(p1);
OracleParameter p2 = new OracleParameter("o_result", OracleDbType.Int32);
p2.Direction = ParameterDirection.Output;
P2.CollectionType = OracleCollectionType.PLSQLAssociativeArray;
p2.Value=0;
cmd.Parameters.Add(p2);
int i = 0;
try
conn.Open();
cmd.ExecuteNonQuery();
i =(int) p2.Value;
catch (Exception ex)
finally
conn.Close();
Error:
Execution Failed:ORA-06550:Line 1,Column 7:
PLS-00306:Test parameters when calling the number or types of errors
ORA-06550:Line 1,Column 7:
PL/SQL:Statement ignored

Hi,
See the answer in [this thread|http://forums.oracle.com/forums/thread.jspa?threadID=909564&tstart=0]
Hope it helps,
Greg

. NET to call Oracle stored procedure, use an array of types of parameters

. NET to call Oracle stored procedure, use an array of types of parameters
Step1：(In the Oracle database define an array of types)
CREATE OR REPLACE TYPE STRING_VARRAY AS VARRAY (1000) OF NVARCHAR2(255)
Step2：
CREATE OR REPLACE PROCEDURE Test
(i_test in string_varray,o_result out int)
IS
BEGIN
o_result:=i_test.count;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
NULL;
WHEN OTHERS
THEN
o_result:=0;
END arraytest;
Step3：
Use System.Data.OracleClient
C# Code:
OracleConnection conn = new OracleConnection("User Id=test;Password=test;Data Source=test");
OracleCommand cmd = new OracleCommand("Test", conn);
cmd.CommandType = CommandType.StoredProcedure;
string[] str = new string[] { "11", "22" };
OracleParameter p1 = new OracleParameter("i_test", OracleType.NVarChar);
p1.Direction = ParameterDirection.Input;
p1.Value = str;
cmd.Parameters.Add(p1);
OracleParameter p2 = new OracleParameter("o_result", OracleType.Int32);
p2.Direction = ParameterDirection.Output;
cmd.Parameters.Add(p2);
int i = 0;
try
conn.Open();
cmd.ExecuteNonQuery();
i =(int) p2.Value;
catch (Exception ex)
finally
conn.Close();
Error:
Execution Failed:ORA-06550:Line 1,Column 7:
PLS-00306:Test parameters when calling the number or types of errors
ORA-06550:Line 1,Column 7:
PL/SQL:Statement ignored
Edited by: user10133982 on Jun 4, 2009 7:13 AM

. NET to call Oracle stored procedure, use an array of types of parameters
The use of ODP.net(Oracle 10g), the error is still the same
Step1：(In the Oracle database define an array of types)
CREATE OR REPLACE TYPE STRING_VARRAY AS VARRAY (1000) OF NVARCHAR2(255)
Step2：
CREATE OR REPLACE PROCEDURE Test
(i_test in string_varray,o_result out int)
IS
BEGIN
o_result:=i_test.count;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
NULL;
WHEN OTHERS
THEN
o_result:=0;
END arraytest;
Step3：
ODP.NET(Oracle 10g)
OracleConnection conn = new OracleConnection("User Id=test;Password=test;Data Source=test");
OracleCommand cmd = new OracleCommand("Test", conn);
cmd.CommandType = CommandType.StoredProcedure;
string[] str = new string[2] { "11", "222" };
cmd.ArrayBindCount=2;
OracleParameter p1 = new OracleParameter("i_test", OracleDbType.NVarChar);
p1.Direction = ParameterDirection.Input;
p1.CollectionType = OracleCollectionType.PLSQLAssociativeArray;
p1.Value = str;
p1.ArrayBindSize=new int[2]{2,3};
p1.ArrayBindStatus = new OracleParameterStatus[2]{
OracleParameterStatus.Success,
OracleParameterStatus.Success
cmd.Parameters.Add(p1);
OracleParameter p2 = new OracleParameter("o_result", OracleDbType.Int32);
p2.Direction = ParameterDirection.Output;
P2.CollectionType = OracleCollectionType.PLSQLAssociativeArray;
p2.Value=0;
cmd.Parameters.Add(p2);
int i = 0;
try
conn.Open();
cmd.ExecuteNonQuery();
i =(int) p2.Value;
catch (Exception ex)
finally
conn.Close();
Error:
Execution Failed:ORA-06550:Line 1,Column 7:
PLS-00306:Test parameters when calling the number or types of errors
ORA-06550:Line 1,Column 7:
PL/SQL:Statement ignored
Edited by: user10133982 on Jun 5, 2009 7:48 AM

Calling Oracle store procedure from Crystal 11 command

I need to call Oracle store procedure from Crystal Command. The Store proc has ref cursor. Is it possible. Can you post few examples?
Also, is it possible to have multiple sql statements in a Crystal Command, when working with Oracle 10g?
It is working for SQL server.

Please re-post if this is still an issue to the Data Connectivity - Crystal Reports Forum or purchase a case and have a dedicated support engineer work with you directly.

Call oracle stroed procedure

How can i call oracle stored procedure, i am passing parameter into it & getting out of it. Can Someone Help me out with a solution.
yash
Application Engg
Attachments:
OracleProcedure.txt ‏1 KB

See Using Database Stored Procedures, Transactions, and Exceptions for Oracle 8.0.4
Also, this thead.

How to call oracle stored procedure

how to call oracle stored procedure using
jdevloper.can any one help?
thanks
pullareddy

Connection conn =
DriverManager.getConnection("your connect string");
CallableStatement stm=conn.prepareCall( "{?=call getDeptName(?)}");
stm.registerOutParameter(1,OracleTypes.VARCHAR);
int deptno=10;
stm.setInt(2,deptno);
stm.execute();
String dname=stm.getString(1);
stm.close();
conn.close();
getDeptName is a function:
FUNCTION
getDeptName(id IN NUMBER) RETURN VARCHAR2...

Problem in calling Oracle stored procedure from Java.

I am trying to invoke the Oracle stored procedure from Java. The procedure does not take any parameters and does not return anything. If I call it from SQL prompt it is working perfectly. I am calling it in my program as follows.
callable_stmt=con.prepareCall("{call pkg_name.proc_name()}");
callable_stmt.execute();
The problem is the control-of-flow is getting strucked in the second line I wrote. It is not giving any error also.
Please clarify me what's wrong with my code?
Seenu.

And how long does the stored procedure take to run from your client machine when running it via sqlplus?

Calling Oracle stored procedure from java

The following query calls a stored procedure TRANSLATE_ZONEPATH_ID defined in a package MT by the user MTDBA. currentZone is a member variable of the class, and currently has value 1
This query works just fine when I run it from SQLPlus* connected as MTDBA.
But from java, the following piece throws exception saying "invalid column name"
String query = "SELECT MTDBA.MT.TRANSLATE_ZONEPATH_ID('"+currentZone+"') "
+ "FROM DUAL ";
try
Statement stmt = conn.createStatement();
ResultSet rst = stmt.executeQuery(query);
if (rst.next())
fullName = rst.getString(1);
stmt.close();
Anyone got any clue ?

I always use CallableStatement to execute a stored procedure or function in a database (Oracle).
try this:
<code>
CallableStatement cs = dbConnection.prepareCall("{ ? =
MTDBA.MT.TRANSLATE_ZONEPATH_ID(?)}");
cs.setString(1, currentZone);
cs.registerOutParameter(1, Types.VARCHAR);
cs.executeUpdate();
fullname = cs.getString(1);
cs.close();
</code>
There is also a jdbc forum, where your should post this kind of problem :-)
Hope this help's
ThK

How to call oracle stored procedure with OUT parameter?

I create oracle stored procedure in eclipse oepe
PROCEDURE SP_SELECT_ORA (
ID_INPUT IN VARCHAR2,
ID_OUTPUT OUT VARCHAR2,
PASSWD_OUTPUT OUT VARCHAR2,
NAME_OUTPUT OUT VARCHAR2) IS
BEGIN
SELECT EMP_ID, EMP_Passwd, EMP_Name
INTO ID_OUTPUT, PASSWD_OUTPUT, NAME_OUTPUT
FROM family
WHERE EMP_ID = ID_INPUT;
END;
and I try to call the sp in jpa like below,
@NamedNativeQueries({
     @NamedNativeQuery(name = "callSelectSP", query = "call SP_SELECT_ORA(?,?,?,?)", resultClass = Members.class)
@Entity
@Table(name="family")
public class Members implements Serializable {
     @Id
     @Column(name = "EMP_ID")
     private String ID;
     @Column(name = "EMP_Passwd")
     private String Passwd;
     @Column(name = "EMP_Name")
     private String Name;
==============
@PersistenceContext(unitName="MyFamily")
     EntityManager em;
query = em.createNamedQuery("callSelectSP");
     query.setParameter(1, ID);
     String id_output = null;
     String passwd_output = null;
     String name_output = null;
     query.setParameter(2,id_output);
     query.setParameter(3,passwd_output);
     query.setParameter(4,name_output);
     query.executeUpdate();
     member = (Members)query.getSingleResult();
But this query throws exception,
19:55:35,500 WARN [org.hibernate.engine.jdbc.spi.SqlExceptionHelper] (http--127.0.0.1-8080-1) SQL Error: 1465, SQLState: 72000
19:55:35,500 ERROR [org.hibernate.engine.jdbc.spi.SqlExceptionHelper] (http--127.0.0.1-8080-1) ORA-01465: invalid hex number
I don't know how. Pls, give me your advice. Thanks in advnace.
Best regards

Thank you for your reply, Chris!
I tried this one.
@NamedNativeQueries({
@NamedNativeQuery(name = "callSelectSP", query = "exec SP_SELECT_ORA( ?, :id_output, :passwd_output, :name_output) " , resultClass = Members.class)
@Entity
@Table(name="family")
public class Members implements Serializable
===================
query = em.createNamedQuery("callSelectSP");
query.setParameter(1, ID);
String id_output = null;
String passwd_output = null;
String name_output = null;
query.setParameter("id_output", id_output);
query.setParameter("passwd_output", passwd_output);
query.setParameter("name_output",name_output);
query.executeUpdate();
On Console hibernate shew the sql and ora # like below,
19:59:25,160 INFO [stdout] (http--127.0.0.1-8080-1) Hibernate: exec SP_SELECT_ORA( ?, ?, ?, ?)
19:59:25,192 WARN [org.hibernate.engine.jdbc.spi.SqlExceptionHelper] (http--127.0.0.1-8080-1) SQL Error: 900, SQLState: 42000
19:59:25,192 ERROR [org.hibernate.engine.jdbc.spi.SqlExceptionHelper] (http--127.0.0.1-8080-1) ORA-00900: Invalid SQL statement
Pls, inform me your advice. Thanks in advance.
Best regards.

Calling Oracle stored procedure with out param of user define type from Entity Framework 5 with code first

Guys i am using Entity Framework 5 code first (I am not using edmx) with Oracle and all works good, Now i am trying to get data from stored procedure which is under package but stored procedure have out param which is user define type, Now my question is
how i will call stored procedure from entity framework
Thanks in advance.

I agree with you, but issue is we have lots of existing store procedure, which we need to call where damn required. I am sure those will be few but still i need to find out.
If you think you are going to get existing MS Stored Procedures or Oracle Packages that had nothing to do with the ORM previously to work that are not geared to do simple CRUD operations with the ORM and the database tables, you have a rude awakening
coming that's for sure. You had better look into using ADO.NET and Oracle Command objects and call those Oracle Packages by those means and use a datareader.
You could use the EF backdoor, call Oracle Command object and use the Packages, if that's even possible, just like you can use MS SQL Server Stored Procedures or in-line T-SQL via the EF backdoor.
That's about your best shot.
http://blogs.msdn.com/b/alexj/archive/2009/11/07/tip-41-how-to-execute-t-sql-directly-against-the-database.aspx

Calling Oracle Stored procedure with OUT parameter from ODI

Hi,
I called an oracle stored procedure with following anonymous block in the ODI procedure.
Declare
Status varchar2(10);
Begin
OTM.DeleteTarget('E_KPI_TARGET_VALUE', Status);
End;
I want to capture the OUT parameter STATUS value in a project level variable.
And based on its va;lue I would like to choose between 2 interfaces in my package.
Please help me in doing this.

Hi,
For that kind of situation I commoly use:
1) one step with:
create or replace package <%=odiRef.getSchemaName("W")%>.pck_var
Status varchar2(10);
end;
* transaction 9, for instance
2) step
Begin
OTM.DeleteTarget('E_KPI_TARGET_VALUE', <%=odiRef.getSchemaName("W")%>.pck_var.Status);
End;
* transaction 9
3) then, at an ODI variable, use a refresh like:
select <%=odiRef.getSchemaName("W")%>.pck_var.Status from dual
at same logical shema where the package was created.
Does it make sense to you?

Problem calling Oracle10g stored procedure (bug?)

Hello everybody, I am trying to call a stored procedure Oracle on Oracle 10g XE from Java.
I can succesfully execute query from Java, so I can say that driver, connection, ... are all right.
I have the following error when I try to call a stored procedure or a function.
I think that it is a bug of the file OraClient10.Dll, so, in general, a bug that don't depends from my code. So I install the most recent version of JDK/JRE, and I download again file OraClient10.Dll but result was the same.
Please help me!
Thank you
Ulix
# A fatal error has been detected by the Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x61d37460, pid=3872, tid=1224
# JRE version: 6.0_16-b01
# Java VM: Java HotSpot(TM) Client VM (14.2-b01 mixed mode windows-x86 )
# Problematic frame:
# C [OraClient10.Dll+0x117460]
# An error report file with more information is saved as:
# If you would like to submit a bug report, please visit:
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
#

Why not just connect via the thin mode of the driver, not the oci mode?
You'll get all the functionality and none of the native code bug risk.

Problem calling Oracle's procedure in Chain

Similar Messages

Maybe you are looking for