Problem calling webservice through Webdynpro

Hi,
I have created a webservice model for BAPI_ALM_CONF_CREATE in webdynpro. The execution of the webservice is working fine and the confirmation is done, but the response from the webservice is coming blank. I need the confirmation number and count as return for my furthur processing. I have checked the model binding with the webservice and everything seems fine. Please let me know if I have missed something to get the response working.
Thanks
Raghav

Hi,
   in a webservice model the nodes are created in following manner
    webservicemodelname
    --Request
      ---Response
    --Response
u have to bind the reuqestnode and its subnode it responsenode also to the component controller node...
then in executor method
crete the object of modelcalss and bind it to the context of compoent controller
and then execute the model ..
response should be ther in component controller context .
then map it to where u want....
also check where u are invalidating the response..
u dont have to invalidate the respponse because it delete all the data from the context.
Regards,
yashpal
Message was edited by: Yashpal Gupta

Similar Messages

Problem invoking XI webservice through webdynpro

We have created a webservice on XI that calls the BAPI_COMPANYCODE_GETLIST on an R/3 4.6C system. We generated the WSDL using the Integration builder and corrected the URL to point to the webservice (rather than the wizard proposed URL).
We can call the webservice through XMLspy and other tools. But we are not able to use webdynpro to invoke the webservice. We uploaded the webservice on the web application server so we can get to it through a URL.
The problem is that when we use webdynpro and try to link it to a webservice, we can point to the URL which is for the WSDL we uploaded to the webserver. But there is no other field in webdynpro to specify the URL for the webservice endpoint. The endpoint is actually in the WSDL and it seems correct:
http://servername:50000/XISOAPAdapter/MessageServlet?channel=:BS_EXTERNALAPP:BAPI_COMPANYCODE_GETLIST_WEBSERVICE_SOAP_SENDER;version=3.0;Sender.Service=BS_EXTERNALAPP;Interface=http://xyz.com/xi_demo/BAPI_COMPANYCODE_GETLIST_OUTBOUND_SYNC_MI
Through XMLspy we can just point to the WSDL. And then we can just specify the username and password and it runs. But with webdynpro, we are not able to invoke it.
Any ideas what we can do?
Here is the WSDL below:
Thanks,
Jay
<?xml version="1.0" encoding="ISO-8859-1"?>
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:rfc="urn:sap-com:document:sap:rfc:functions" xmlns:p1="http://xyz.com/xi/xi_demo" name="BAPI_COMPANYCODE_GETLIST_OUTBOUND_SYNC_MI" targetNamespace="http://xyz.com/xi/xi_demo">
 <wsdl:types>
 <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn:sap-com:document:sap:rfc:functions" targetNamespace="urn:sap-com:document:sap:rfc:functions">
 <xsd:element name="BAPI_COMPANYCODE_GETLIST.Response">
 <xsd:complexType>
 <xsd:all>
 <xsd:element name="RETURN" type="BAPIRETURN" minOccurs="0"/>
 <xsd:element name="COMPANYCODE_LIST">
 <xsd:complexType>
 <xsd:sequence>
 <xsd:element name="item" type="BAPI0002_1" minOccurs="0" maxOccurs="unbounded"/>
 </xsd:sequence>
 </xsd:complexType>
 </xsd:element>
 </xsd:all>
 </xsd:complexType>
 </xsd:element>
 <xsd:element name="BAPI_COMPANYCODE_GETLIST">
 <xsd:complexType>
 <xsd:all>
 <xsd:element name="COMPANYCODE_LIST">
 <xsd:complexType>
 <xsd:sequence>
 <xsd:element name="item" type="BAPI0002_1" minOccurs="0" maxOccurs="unbounded"/>
 </xsd:sequence>
 </xsd:complexType>
 </xsd:element>
 </xsd:all>
 </xsd:complexType>
 </xsd:element>
 <xsd:complexType name="BAPI0002_1">
 <xsd:sequence>
 <xsd:element name="COMP_CODE" minOccurs="0">
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="4"/>
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="COMP_NAME" minOccurs="0">
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="25"/>
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
 <xsd:complexType name="BAPIRETURN">
 <xsd:sequence>
 <xsd:element name="TYPE" minOccurs="0">
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="1"/>
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="CODE" minOccurs="0">
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="5"/>
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="MESSAGE" minOccurs="0">
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="220"/>
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="LOG_NO" minOccurs="0">
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="20"/>
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="LOG_MSG_NO" minOccurs="0">
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="6"/>
 <xsd:pattern value="\d+"/>
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="MESSAGE_V1" minOccurs="0">
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="50"/>
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="MESSAGE_V2" minOccurs="0">
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="50"/>
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="MESSAGE_V3" minOccurs="0">
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="50"/>
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="MESSAGE_V4" minOccurs="0">
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="50"/>
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
 </xsd:schema>
 </wsdl:types>
 <wsdl:message name="rfc.BAPI_COMPANYCODE_GETLIST.Input">
 <wsdl:part name="parameters" element="rfc:BAPI_COMPANYCODE_GETLIST"/>
 </wsdl:message>
 <wsdl:message name="rfc.BAPI_COMPANYCODE_GETLIST.Output">
 <wsdl:part name="parameters" element="rfc:BAPI_COMPANYCODE_GETLIST.Response"/>
 </wsdl:message>
 <wsdl:portType name="BAPI_COMPANYCODE_GETLIST_OUTBOUND_SYNC_MI">
 <wsdl:operation name="BAPI_COMPANYCODE_GETLIST_OUTBOUND_SYNC_MI">
 <wsdl:input message="p1:rfc.BAPI_COMPANYCODE_GETLIST.Input"/>
 <wsdl:output message="p1:rfc.BAPI_COMPANYCODE_GETLIST.Output"/>
 </wsdl:operation>
 </wsdl:portType>
 <wsdl:binding name="BAPI_COMPANYCODE_GETLIST_OUTBOUND_SYNC_MIBinding" type="p1:BAPI_COMPANYCODE_GETLIST_OUTBOUND_SYNC_MI">
 <soap:binding xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
 <wsdl:operation name="BAPI_COMPANYCODE_GETLIST_OUTBOUND_SYNC_MI">
 <soap:operation xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" soapAction="http://sap.com/xi/WebService/soap1.1"/>
 <wsdl:input>
 <soap:body use="literal" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"/>
 </wsdl:input>
 <wsdl:output>
 <soap:body use="literal" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"/>
 </wsdl:output>
 </wsdl:operation>
 </wsdl:binding>
 <wsdl:service name="BAPI_COMPANYCODE_GETLIST_OUTBOUND_SYNC_MIService">
 <wsdl:port name="BAPI_COMPANYCODE_GETLIST_OUTBOUND_SYNC_MIPort" binding="p1:BAPI_COMPANYCODE_GETLIST_OUTBOUND_SYNC_MIBinding">
 <soap:address location="http://servername:50000/XISOAPAdapter/MessageServlet?channel=:BS_EXTERNALAPP:BAPI_COMPANYCODE_GETLIST_WEBSERVICE_SOAP_SENDER&version=3.0&Sender.Service=BS_EXTERNALAPP&Interface=http%3A%2F%2Fxyz.com%2Fxi%2Fxi_demo%5EBAPI_COMPANYCODE_GETLIST_OUTBOUND_SYNC_MI" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"/>
 </wsdl:port>
 </wsdl:service>
</wsdl:definitions>

When i try to make the call through Test Data service in Visual composer, i get the error: "Portal request failed (Could not execute Web service operation)". This happens regardless of whether we supply input values for Comp Code and Comp Name.
So Visual composer is reading the WSDL and showing the input parameters correctly. The link for the WSDL needs the same authentication user and pwd as the actual webservice invocation link which is in the WSDL.
So i am not sure why the call is failing because it works easily through XMLspy.
- Jay

Problem calling WebService from VisualComposer model at runtime

Hello Experts,
I have a very simple model with form as input for calling Webservice on backend system and a table as output.
During the runtime the WebService call is failing with:
Error while getting the backend function : Could not find operation Z_EAI_GETUSERROLES_WS.ZEaiGetuserroles
The service definition is succesfully published to CE's ServiceRepository.
There is a correct entry for backend system under SOA->Destination Template Management in CE NWA.
I can succesfully test this WebService in WSNavigator in both systems - CE and backend.
I can succesfully test this WebService in NWDS at design time (by right-clicking on service)
In Logs Viewer I can see the following entries:
error 2011-10-13 17:16:01:838 Stopped further execution since the interpreter is unusable /Applications/wd4vc com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.XGLInterpreter sap.com/aanisecurityui~vc_impl
info 2011-10-13 17:16:01:837 Closing the connection for the system SRR /Applications/wd4vc com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.postExecution: sap.com/aanisecurityui~vc_impl
warning 2011-10-13 17:16:01:272 No classification system found for ID 'uddi:uddi.sap.com:categorization:physical-system-id' /Applications/UDDI/Classification com.sap.esi.uddi.sr.cs.handler.impl.ejb.util sap.com/tcesiuddisrcs~ear
Can you please advise me what else I need to check to solve this error?
Best Regards,
Artsiom Anichenka

Hi Artsiom ,
I don't know VC and how it is on CE 7.3, but when developing Java Webdynpro application using CE 7.11 on same principle (with destination template defined in NWA), we sometimes faced almost same situation due to cache problem...
Basically, this happen if you deploy your application using a model, change your webservice (for example adding a new field), re-import the model in NWDS and re-deploy. In NWDS, everything seems to be ok, but at runtime, it fails due to cache problem which is not refreshed with the new meta data definition. The only solution in 7.11 was to restart the server. I think (but not sure) that starting 7.2, there is a tool to clean the (webservice) cache.
I hope it could help...
Regards
Olivier

Calling webservice from webdynpro thru model(webservice created from BAPI)

Hi all
i have created one webservice from Functional module in backend system(ECC) and also i released the same webservice in backend(ECC) thru the TCODE wsconfig.
my questions are
1) how to execute that created Webservice in backend system itself(ECC). can you please send the execution steps for webservice in ECC system.
2) how to call from webdynpro thru model for that created webservice from functional module. can you please send the execution steps for the same. here there are three options while model for webservice like local server,Local file system and UDDI or URL.
Regards
Sunil
[points are always rewardable]

hi!
Below are good documents on Webservices
Adaptive webservice model
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/900bbf94-a7a8-2910-e298-a651b4706c1e
Re Importing of Web Services in Simpler way
Re Importing of Web Services in Simpler way
Using RFC as WebService in WebDynpro
Using RFC as WebService in WebDynpro
Enterprise Applications with webservices and Web Dynpro
The specified item was not found.
Regards
vishal

Call webservices through asp do net page

Anyone got an example of ASP.NET that will call a webservices configure for Oracle Weblogic 12c
I can install the web services on weblogic now need to test through a web page before handing off to the developers.
Can anyone help provide an example how to run the webservices through ASP.NET page?
Cheers

I believe you are at the wrong forum. However as far as I know like in Jdeveloper ASP has webservice proxy class so you can show wsdl and this will be your starting point.

Call WebService through EJB

Hi friends,
I have created one web service , how can i call that web service through ejb . Is this possible ?.. can anybody help me....
Thanks and Regards,
Krish

Hi Krish,
This recent [thread|How to Call webservice by another webservice; deals with the same question. See the answers / links there.
Hope it helps!
-- Vladimir

Problem in calling Webservice from Webdynpro ABAP

I want to call a BAPI FM which is available in SAP ECC server when user is clicking on a button in a web dynpro application which is available in SAP Portal server.
For example,
Portal server name is DVP-EPP &
ECC server name is DVP-ECC
I have the done the following steps to achieve it,
In Server DVP ECC:
1) Created Web service from the standard BAPI FM (SE37-->Utilities-->More Utilities-->Create WebService --> From the the Func.Module)
2) Downloaded the WebService as WSDL file from SOAMANAGER
3) Tested the Web service through SE80, it is correctly calling the BAPI & creating necessary data.
In Server DVP EPP:
4) Created a Proxy class as follows,
a) SE80 --> Package --> Create --> Enterprise service
b) Selected Object type "Service Consumer"
c) Selected Service Consumer "Local File"
d) Browsed and selected WSDL file downloaded from DVP ECC
e) Selected the Package, Prefix, Request, Completed the process & Activated it.
5) Configured the Logical port as follows,
a) Selected my Proxy class through F4
b) Wrote a name for Logical port, Selected 'Default port' checkbox and selected 'Create'
c) In the next screen, in 'Call parameters' tab, selected the 'URL' radio button & mentioned the URL of the WSDL-Document created in DVP-ECC system
d) Saved the data & activated it
5) Now, tested the service through (SE80-->Package-->Enterprise Services-->Client Proxy) option.
6) When I test it, system prompts a dialog box for User-Name & Password (as available in DVP-ECC system).
After the details are given, system throws the Information message as "SOAP:14 Unexpected element -el=definitions ns=http://schemas.xmlsoap.org/wsdl/" - Exception of class CX_AI_SYSTEM_FAULT
No record is created in DVP-ECC through the WebService BAPI.
Please tell me whether the steps that I followed are correct as per my requirement and a solution for the above interruption.
Thanks in advance

Good day guys,
Somehow I managed to resolve the above error.
Now in DVP-EPP system, I am able to Test the Web service Client Proxy (through SE80) and a record is successfully created in destination system (DVP-ECC).
Now, in Webdynpro I am unable to call this webservice proxy class.
System throws the error,
Error (id=SoapFaultCode:5): Web service processing error; more details in the
web service error log on provider side (UTC timestamp 20141006045544;
Transaction ID 9A144DE49C12F1B5A6B9E41F137BE3CC)
I just created a sample WDA application and on click of a button I am calling the Webservice Proxy class as follows,
Method on_submit_click().
TRY.
      CREATE OBJECT wd_assist
        EXPORTING
          logical_port_name = 'ZLOG_PORT'. "Logic port creatd for Proxy class (in SOAMANAGER)
      CALL METHOD wd_assist->bus1240create     "Method available in generated Proxy Class
        EXPORTING
          input = ls_inp
        IMPORTING
          output = ls_outp.
    CATCH cx_ai_system_fault.
ENDTRY.
ENDMETHOD.
Do I have to do any thing additionally in order to call the WebService in WDA?? Because, in the same system, if I test it in SE80, record is perfectly created in destination server.
Also please suggest if I have to do any other configuration changes related to this.
Keenly awaiting your reply.
Have a nice day .
Thank you.

How to call webservice through Oracle HTTP Server

I have cluster of three Managed Servers. They are behind a Oracle HTTP Server. I deployed a web service to the cluster. When calling web service, I got the error. The error is that the client of web service can not directly access the Managed Servers.
The error tell that it can not access http://webapp01:7003/webservice/HelloWorld?WSDL
Where webapp01 is the host name of a managed server.
Is there a way that web service return the result to HTTP Server and HTTP Server return it to web service client.

1. Before you invoke the WebServices from client program, I guess you may have already generated the webservices client jar for the WSDL that is deployed using sun jdk "wsimport" command or bea's clientgen ant task. At this time, what is the wsdl url you gave. In the generated client jar file you should see .JAVA files also. Check the Service related .java file and check the WSDL URL in that file. If it is using weblogic servers managed server host and port, then the problem you see is obvious.
2. To fix this, you re-generate the webservices client jar file again this time giving the http server host and port instead of weblogic host and port. I am hoping you already modified httpd.conf file to accept the webservice url pattern. Check the .JAVA file generated for service to see the WSDL URL that is having inside.
3. Another approach is on your client side, before you invoke any operation on WebService, you will be first getting Service object, then Port object and invoke methods on Port object. When you get Service Object, you can pass the WSDL URL as one parameter and ServiceName (QName) as second parameter. Most of time we use default constructor without any parameters to get Service object. But you can use other constructor and pass 2 parameters. The WSDL URL will have HttpServers host and port, and rest of the url for wsdl will be the same.
In our env, we have similar requirment. SOAP BPEL Process WebServices are deployed on WLS 10.3.1 on a Cluster with 2 ManagedServers. We have Apache Proxy in front of this Cluster. All our WSDL requests goes to Apache host and port + wsdl url. This inturn goes to one of the managed servers at a time in round-robin. This is working. In httpd.conf we gave "MatchExpression / " so that any request from apache will go to cluster.
HTH
Ravi Jegga

Calling webservice in webdynpro component

Hi All
I am working on a scenrio where I need to call a webservice outside SAP system into my webdynpro abap component.Kindly let me know how to achieve this.
Regards
Sudheendra

In Web Dynpro ABAP there is nothing special about calling a web service. Unlike WD Java, there are not dedicated model object types in WD ABAP. WD ABAP simply has the ability to interact with other ABAP development object types. You can call function modules, ABAP classes, even modules in old dynpro apps.
So calling the webservice from ABAP therefore is just the process of generating the ABAP Proxy Class. This is the same process regardless of if you want to use this proxy class from WDA or any other type of ABAP development object. You can then call the proxy class from WDA just like any other type of ABAP class. There is a service wizard option in later support package levels that includes an option for ABAP Proxy classes - although it doesn't generate the proxy class it just generates the code and context for the call to an already existing proxy class. The service wizards in WD ABAP are not required however. They are just shortcut code generators and often can't even generate a complete context for a complex web service proxy - so expect to do some manual adjustment after running the wizard.

Problem call WebService NSUrl

Hi!! I wonder why I try to run a Webservice call he did not run through NSUrl, but if I copy and paste the link in Safari it runs successfully, it is giving the error:
_urlString - 0x147d8010 - Invalid Summary
_baseURL - 0x8b1c7400 - Invalid Summary
My URL called is:
NSString *urlString = @"www.baladafriendsmeeting.com/wsBaladaFriends.asmx/addUsuario?Chave=CHAVETESTE& Device=aaxx&Usuario=aaa&Email=bbb&Sexo=1&PostTwitter=0&AtivaGPS=1&AtivaSpam=1";
NSURL *url = [[NSURL alloc] initFileURLWithPath:urlString];
Thanks

You are creating a file URL (file://xxx) with the call to initFileURLWithPath. Use the proper initialiser and you should get proper results.

R/3 call webservice through XI

We try to call web service from R/3 system through XI, and indeed planning to use ABAP Proxy to pass parameters from R/3 to XI.Web Server have already got its own wsdl for request & response.
Do we need any mapping for R/3 parameters to wsdl request format? Is SOAP adapter needed here?
How to make XI generate request in wsdl-defined format in this case?
Thanks

Hi Rokie,
Do we need any mapping for R/3 parameters to wsdl request format? Is SOAP adapter needed here?
Since ur scenario is Proxy<->XI<->SOAP.u can use the same data type/XSD as given in the WSDL.
i mean to say..u can use same data structure in sender and reciver side...in that case u need not require any mapping....
But if u want to use different srtucture...u need to do the transformation..so u have to go for mapping....
How to make XI generate request in wsdl-defined format in this case?
thats not difficult!!!
u need to write a report in R/3...which will trigger the proxy....proxy inturn will send the required data to webservice...and the webservice will give the response upon correct input.
regards
biplab

How to call webservices in webdynpro abap

Hi Experts,
My requirement is I have to call an URL by exporting an XML file to that URL I have to import an XML file again i .e nothing but I have to send request file in the form of XML and need to get response in the form of XML file from the URL .This total execution should be finished by clicking a button in webdynpro ABAP.
Regards,
Satya.

Hello Satya,
You may try to find the sample code as follows:
1. Goto Transaction se80
2. Select "package" --> enter "SWDP"
3. goto "embedded packages" --> "SWDP_DEMO" --> Web Dynpro
Here, you will get demo applications. Find the most appropriate demo application and try to customize the code according to your requirement.
Best Regards,
Raju MJRK

Problem calling WebService from Oracle Forms created by JDeveloper

Hi All,
I am trying to call a Webservice from Oracle Form using JAVA Class created by Oracle JDeveloper.
The Java Function (in JDeveloper) is as follows:
public Vector GetPIValue(String TagName, String ReadingTime) throws Exception
URL endpointURL = new URL(endpoint);
Envelope requestEnv = new Envelope();
Body requestBody = new Body();
Vector requestBodyEntries = new Vector();
requestBodyEntries.addElement(TagName);
requestBodyEntries.addElement(ReadingTime);
requestBody.setBodyEntries(requestBodyEntries);
requestEnv.setBody(requestBody);
Message msg = new Message();
msg.send(endpointURL, "http://tempuri.org/GetPIValue", requestEnv);
Envelope responseEnv = msg.receiveEnvelope();
Body responseBody = responseEnv.getBody();
return responseBody.getBodyEntries();
When this Class is Imported into Oracle Forms the Function is converted into the following PL/SQL code:
FUNCTION GetPIValue(
obj ORA_JAVA.JOBJECT,
a0 VARCHAR2,
a1 VARCHAR2) RETURN ORA_JAVA.JOBJECT IS
BEGIN
Message('param passed: '||a0||' - '||a1);
cls := JNI.GET_CLASS('oracle/forms/demos/webservice/ConnectToPIStub');
mid := JNI.GET_METHOD(FALSE, cls, 'GetPIValue', '(Ljava/lang/String;Ljava/lang/String;)Ljava/util/Vector;');
args := JNI.CREATE_ARG_LIST(2);
JNI.ADD_STRING_ARG(args, a0);
JNI.ADD_STRING_ARG(args, a1);
Message('I am Here');
RETURN JNI.CALL_OBJECT_METHOD(obj, mid, args);
END;
When I am calling this Function from Within Forms and Passing into it the Parameters, I am displaying some Debugging Messages. When the Code reaches "JNI.CALL_OBJECT_METHOD" there is NO RESPONSE from the Webservice and nothing is moving forward after this Point...
A similar Webservice that can be Tested is:
http://www.webservicex.com/CurrencyConvertor.asmx
with WSDL file:
http://www.webservicex.com/CurrencyConvertor.asmx?wsdl
Kindly note that this Webservice is running properly from the Web Browser but the call from Oracle Forms is not Succeeding!!!! :-((
Any help is much appreciated.
Regards,
Baz

Hi,
Yes, you need to compile your source files with JDK 1.3 (since JInit 1.3.x.x uses JDK 1.3).
Other solution would be to use JRE 1.5 (instead of JInitiator).
Check out [this thread|http://forums.oracle.com/forums/thread.jspa?threadID=550563] on how to use JRE1.5
-Arun

Calling transaction through webdynpro abap applicatoin

hi,
Is it possible to call an EWT transaction or an transaction from a webdynpro abap application.
Regards,
Divya

The example demo listed works under special circumstance ONLY.
Logon to SAP.
At main menu add a favourite of type WDA.
Choose application wdr_sapgui_demo1 .
Now run demo.
The WDA app appears inside an SAP GUI screen.
Now the when the runtime API call the sapgui manager, a handle to the GUI is available.
The new transaction can now be fired. EG navigate away to new transation.
If the GUI is not already active you have another issue.
I suggest you search the forum for the use of SAPGUI shortcuts and other
such tricks . There has been a few topics and solutions discussed.
Cheers
Phil.

Problem calling WebService from XI scenario

Hi forum,
i trued to make a scenario to call a webservice from my XI scenario, i made it using the following blog :
/people/bhavesh.kantilal/blog/2006/11/20/webservice-calls-from-a-user-defined-function
I have configured a receiver SOAP channel and has mentioned the Target URL as
http://www.webservicex.net/CurrencyConvertor.asmx
now the scenario gives the error in the communication channel monitoring in RWB as
SOAP: call failed: java.net.UnknownHostException: www.webservicex.net
but from my local machine i can access this URL, ....can u pls site the defect

Hi sudeep,
Specify the proxy address details like address and port. and also check the soap receiver channel properly configured or not.
Regards,
Deviprasad Pothireddi.

Problem calling webservice through Webdynpro

Similar Messages

Maybe you are looking for