Problem camera Recording

Hello,
I have a G20 and on the back of it there is a S-video in port. As far as I know i must then be able to record my camcorder vhs films . Using Intervideo windvd does however nothing. Using pinaclle studio 9 recognizes a tv port but stll no images here. I am sure that my vcr is ok. Connecting it with an s-video cable to a flat tv is working fine. I just hoped that (this expensive) notebook would do the things I bought him for. Connecting the camera with the rgb cables does not work either.
I hope someone found a solution on this.
many thanks
Ronny

Hi Ronny,
Assuming that you have WinDVD 4 installed, I believe this is only a player rather than a recorder so I would not be surprised that it does not see your input from your VCR.
Pinnacle, on the other hand should be able to see your S-Video input source. Check the Pinnacle data capture device configuration settings to make sure that it is correctly setting S-Video as the input source rather than Composite (RGB).
It is also worth checking that the S-Video port on your VCR is actually an output not an input port. Many VCRs have s-video as an input-only option to allow a signal to be recorded on the VCR.
HTH

Similar Messages

Problem camera recording on iphone4

hello everybody , anybody can help me? i have the problem about recording video or taking the photo, when i do some video recording or photo somethimes it stopped with green column and stop any of moments and does nothing , and when i taking photo somethimes not allways appear green divided wiev and *****, and stop and then goes takink, sorry about my English, can anybody know what problem can it be, ?

Have you removed the clear plastic film from the front of the phone?
Stedman

Stereo Audio Record problem (While recording video as well)

Hi,
I just just bought Sony Xperia C3 dual yesterday. I'm having problem with audio recording. I installed the Sony audio recorder from Google play store but while recording in stereo mode with it the gain suddenly drops after 1/2 second(s). Same problem while recording a video with stock camera app as well, video quality is fine but the audio with it is,just worst. Tried third party app like regorge pro but faced the same problem. Tried disabling the AGC with it, but no good. Recording in mono mode just works fine and I get clear record.
Any solution?
Thanks.

@uliwooly This one i recorded today morning. The audio starts good & clear at the begining but just after one second it drops & then you can hear the bus engine sounds like waterfall. Here is the youtube link https://www.youtube.com/watch?v=5H1jNxyYMlw Here's another video uploaded by a review site with the same problem https://www.youtube.com/watch?v=z3vKwydfN6U & more from youtube https://www.youtube.com/watch?v=-GLLj2ommP4 then i used a third party audio recorder with mic switch option https://www.youtube.com/watch?v=D6d4uAEZFRE as usual with the rear mic the gain suddenly drops after second & you can hear some weird sounds like a "movie bomb" sound at 00:04, "rattle snake" sound at 00:05 & 00:12 & with the front mic starts at 00:17 you can hear the difference. It's mono but so clear & sharp. Finally, as i dont have the mic swith option while recording video, all videos i record will have the same problem. This is definitely not the typical "sony" thing to carry on.

Looking for forums for Sony digital video camera recorder DCR-TRV 11

I've been thinking hard and decided that I WILL use my Sony digital video camera recorder DCR-TRV 11. (I was being tempted by a smaller Sony that has a 40x optical zoom.
Question: Do you know of where I can find a good forum for this brand and model? I Googled it but would like personal recommendations.
Thank you.
-L

Bengt Wärleby wrote:
Hi
Don't know of any other forum else this (and FinalCut)
Your Camera NEED an FireWire-Cable FW-800 <--> 4-pin or FW-400 <--> 4-pin
I have a FireWire cable.
The supplied USB-Cable will not work with iMovie or FinalCut - Sorry.
Yours Camera also can record Audio as 12-bit or 16-bit Audio.
Please - SET IT TO 16-bit (now) - else severe audio sync problems in iMovie
(FinalCut - might be able to Capture 32kHz audio)
How do I set my Sony digital video camera recorder DCR-TRV 11 to 16-bit?
Also, I do not have or use Final Cut.
Thank you for the warning about 16 bit. I wish you would tell me why it is important to set to 16 bit, though.
Thank you,
-L
Yours Bengt W
Don't know of any other forum else this (and FinalCut)
Your Camera NEED an FireWire-Cable FW-800 <--> 4-pin or FW-400 <--> 4-pin
The supplied USB-Cable will not work with iMovie or FinalCut - Sorry.
Yours Camera also can record Audio as 12-bit or 16-bit Audio.
Please - SET IT TO 16-bit (now) - else severe audio sync problems in iMovie
(FinalCut - might be able to Capture 32kHz audio)

Pan and Tilt Camera Recording Duration

Whenever my Pan and Tilt camera motion sensor goes off, it only records 12 seconds and not the full 30 seconds it should. My other regular inside camera records motion for the full 30 seconds.
Anyone else notice this? I've looked for a setting but as of yet have not found one to change. If you know of one please let me know.
The time stamps on my email notifications show 20 seconds (28:50 - 29:10) but as you can see on the screen snapshot, it only shows 12 seconds. Just to say it before someone asks, yes the 12 seconds is the total time and not the remaining time. Sorry I just had to add that.

I use to have the same problems and found a solution. try this:
1. Export via Final Cut Pro using a quicktime export (not quicktime conversion!) Use your current settings. Now you should have a full quality exported Quicktime file.
2. From there, open DVD SP and go to your preferences. Click on the encode tab and set your SD encoding settings. I advise using
2 Pass VBR Best
Avg Bit Rate 5
Max Bit Rate 7 (I dont see the need for 9 as I have been told 7 does a similar job and saves room for audio bit rate)
Motion Estimatio: best
I like to set it for background encoding as well, but you can encode on build too.
3. Click the apply button
4. Now, bring in you full export file from step 1. You will see the progress in your asset tab (if you background encode). Done!
This should work for you as it has for me. I think the reason is because DVD SP does hardware encoding rather than software encoding, but this is only my guess. And FYI, compressor is completely fixed on mpeg2 encoding in version 3, but I still find myself using the above route simply because it has never failed me and is much more reliable.
Hope this works.

Cannot found url error when i try to play my camera recorded video from my iphone 4S running ios 5.01

I got an error cannot Find url when i attempt to play my camera recorded video from my iphone 4S 32 gig. I try to restart my phone but still no luck. There was no problem previously, but suddenly i got this problem with no reason. I also unable to copy the video to my computer using itunes. So please helppp...
Thanks a ton!!
Note: My iphone 4S is running ios 5.01.

See if it helps to delete the firmware file and download a new one:
Rename, move, or delete the iOS software file (.ipsw)
iTunes uses "ipsw" files to restore your iPod or iPhone. If those files are unusable, then try deleting them, renaming them, or moving the file to a different directory. This will cause iTunes to download a new copy of the IPSW. When a restore issue is specific to a user, it is likely due to an unusable .ipsw file. If removing the .ipsw file does not resolve a user-specific restore issue, then the issue is caused by other user-specific security software settings or iTunes preferences. Creating a new user will also cause new .ipsw restore files to be downloaded in the new user. You can find the ".ipsw" files in these locations:
Mac OS X
iPhone
~/Library/iTunes/iPhone Software Updates
iPad
~/Library/iTunes/iPad Software Updates
iPod touch
~/Library/iTunes/iPod Software Updates
Note: The tilde "~" represents your Home directory.

Problem with recording device

Try to use Echo/Sound test service, as well as a couple friends on the list and get the following message "Problem with recording device". I have also searched in the community, but found many issues releated, but no solutions that fit the problem. Headset: Turtle Beach XP SevenSkype Version: 6.22.81.105Operating System: Windows 7 Ultimate Service Pack 1; 64 - bit Tested in sound recorder, and records my voice, and able to playback and hear my horrible singing. I did find a rather odd way to resolve the issue temporarily. I also use hangouts from time to time, and when I start a video call, it will ring, and send out, and I can then call out using skype to a friend/sound test and it will work fine for the rest of the call. Able to talk, and do whatever. Unfortunatley, with the listed method above I have to repeat the process everytime I want to make a call, or accept someones call. Rather... Annoying. Any solution to this, or what can be causing this issue?

I suggest you download and install the latest generic Realtek audio drivers as they should be compatible with the computer model you listed in a previous post. I run a similar model to that one and have no issues with it. Skype is rather resource intensive on that netbook when participating in video calls due to the limitations of the processor and onboard video chipset. The latest generic Realtek audio drivers (Select "High Definition Audio Codecs" - 32 bit Windows 7)http://www.realtek.com/downloads/okay, i have pretty much given up trying to use Skype on this netbook but i came back to report the known data just in case anyone else might find it useful. to begin with 1) let's get this upfront. i am ignorant, ill-informed, tech-illerate and stupid. i stipulate to this going in. i've NO idea what the hell i'm doing. 2) hardware = ASUS eeePC1005HA, Win7Starter32, 1G DDR2, Intel Atom280, 250GHDD 3) per the above suggestion i went to the RealTek site and looked for the driver, but first 4) i had SlimDriver look around for me and it said there was a newer driver (i think dated 2011) which i had it download & install 5) so that didn't seem to make the slightest difference in Skype performance (i.e. none) so 6)as in (3) above i went to http://152.104.125.41/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false and it offered me 2 choices of sites from which to download Version R2.78 for 32bit Win7 so i picked one at random and it downloaded 2 files, 1 a .exe and the other a PART which i have no idea what the hell that is. i barely know enuf to double clic on the filename in WinExplorer Downloads so that's what i did first on the .exe file cuz that one had a file size greater than zero (unlike the PART file) and got an error message saying Win7 didn't know what to do with this file and could i please suggest a software to use on it. 7) so i deleted it and started over with the same result and then i repeated step 7) only this time i got only the .exe file in my Downloads folder and when i double-clicked it i actually got the Install Wizard to run. 9) so while the Wizard was running i went and looked in my "Windows 7 In Depth" by Cowart & Knittel and found nothing in the index under RealTek so i went and looked at Drivers and based on clues i found there i went to Control Panel ->Hardware & Sound -> Device Manager ->RealTek HD Audio [hidden under expandable Processors - Sound, Video & game conrollers]->(LeftClick to get Update Driver Software), and wait about a year and a half for 'Onliine Search for Software', followed by the message "the best driver software for your device is already installed". 9)so by this time the Install Wizard has finished Uninstalling the previous version of the driver and wants me to RESTART and that's right now in real time so i am now closing this browser and if i ever finish restarting i will continue this response in a new reply window starting with step (10), whatever that turns out to be. the suspense is killing me.

Skype Problem with recording device

After the windows 10 update it keeps saying "Problem with recording device" my camera works but, my microphone doesn't it worked fine before. The thing I use is a really old camera I don't know if that has anything to do with it.

Due to the age of the camera and lack of support from Creative your options are limited. I would suggest you connect the device directly to a free USB port on your machine. If you share it with several devices on a hub or extension the device can easily work intermittently. That type of issue can cause the audio to fail to be initialized, creating the problem. This can also occur if the audio half or both halves of the camera/cabling is intermittently failing as well. You have the option of switching to the generic Microsoft Video and Audio drivers to see if that helps as well. Below is a graphic on you how to update the drivers to the generic "USB Video Device". You can do the exact same thing for the audio half of the camera by updating it to "USB Audio Device" (which is what you might want to try first in this scenario).

Win 10 Problem with recording device

i upgraded to windows 10 yesterday and i was skyping just fine now i go to call someone and it says problem with recording device its really annoying people call me just fine but cant hear me at all i hear them i checked my mic its fine complete response please help me

Yeah no I'm having a very similar problem. Instead of me calling people or people calling me and my microphone not working. I can't even accept calls or make calls, it just drops the call and says "problem with recording device". But I tested my mic and camera and they are both working, so what's wrong? Why is this ruining my night?

Multiple camera recording question

Ok so if i have multiple cameras and one of them triggers and is recording can another record at the same time. it looks like when this happens i lose a video. the triggers are all in the activioty log but no video is there to see.
Al

From my experience the cameras record independently. The motion sensor mode however is not enough for consistent recordings with the wireless cameras. I had to create a second timed mode for each wireless camera and set it to run all day. The issue I have now is consistently viewing the recordings. I keep getting an "unable to play" message! always something!

Battery problem while recording videos.

I got my ipod touch 5 1 month ago. I got a problem while recording videos. The battery was around 40 percent, but after I recorded a video for about 1-2 minutes. The 20% was popup, then it turned off automatically. While I turn on it, the battery will be about 30 percent. It happened several times. Is this normal?
Does anyone have the same problem?
Thanks!

Hi,
Please refer the below link...
http://www.sapfans.com/forums/viewtopic.php?f=27&t=20842
Kuber

I'm having a problem while recording a video

'm having a problem while recording a video
When the memory card and the highest quality ..
Stop and is working
I recorded video works normally on the memory card.

Nokia C5-00 5MP

My Earpiece doesn't work fine. I tried restoring it on iTunes, work's for 2 days then problem came again. Help me on this thanks.

My Earpiece doesn't work fine. I tried restoring it on iTunes, work's for 2 days then problem came again. Help me on this thanks.

Go buy yourself a iPhone 5. Sync your iPhone 3GS to iTunes on you computer so you have a back up ready to put on the iPhone 5. If you want you can update your iPhone 3GS with iTunes on your computer, but this is not necessary.

How to fix the delay problem while recording? Can't set the Latency to 0. Win7, CS6,Realtek,C03u Mic

I am using Win7, with CS6, Realtek soundcard and Samson C03U microphone.
There is a problem that's really been bothering me. When I record songs the recorded audio always comes 0.1 seconds after where it's supposed to be and I need to fix the problem every time. How to fix the delay problem while recording? I can't set the Latency to zero. The minimum is 30ms and I still get an obvious delay.
I saw some previous discussions saying that installing ASIO would help. Is it gonna work on my PC?
Thank you in advance guys.

You probably should look at a more 'serious' audio interface rather than the Realtek
Yes ASIO drivers are the way to go
If you want zero latency you need to monitor via your audio hardware (hence the 'serious' audio interface suggestion)
There are a heap of reasonable audio interfaces which will do the job for you that are pretty inexpensive and I'm sure that someone will jump in with a suggestion

Re: Problem in recording VF02 billing transaction

Hi all,
 I am having a problem in recording the VFO2 for the processing of Despatch details in third screen Header Texts.
How to write the BDC code for uploading data for this TCODE VF02.particularly with header texts.....
 Thanks in Advance
 Ravi

Hi
Check this function module : GN_INVOICE_CREATE
CALL FUNCTION 'GN_INVOICE_CREATE'
 EXPORTING
 DELIVERY_DATE = DELIVERY_DATE
 INVOICE_DATE = INVOICE_DATE
 INVOICE_TYPE = 'ZFX'
 PRICING_DATE = PRICING_DATE
 VBSK_I = X_VBSK
 WITH_POSTING = 'D'
 ID_NO_ENQUEUE = 'X'
 TABLES
 XKOMFK = IT_KOMFK
 XKOMFKGN = IT_KOMFKGN
 XKOMFKKO = IT_KOMFKKO
 XKOMFKTX = IT_KOMFKTX
 XKOMV = IT_KOMV
 XTHEAD = IT_HEAD
 XVBFS = IT_VBFS
 XVBPA = IT_VBPA
 XVBRK = IT_VBRK
 XVBRP = IT_VBRP
 XVBSS = IT_VBSS
 SUCCESS_DOC_OUT = IT_SUCCESS.
Or you can use BAPI :- BAPI_BILLINGDOC_CREATEMULTIPLE
CALL FUNCTION 'BAPI_BILLINGDOC_CREATEMULTIPLE'
EXPORTING
CREATORDATAIN = GS_CREATORDATAIN
TESTRUN = co_x
POSTING = co_x
TABLES
BILLINGDATAIN = GT_BILLINGDATAIN
CONDITIONDATAIN = GT_CONDITIONDATAIN
CCARDDATAIN =
TEXTDATAIN =
ERRORS =
RETURN = GT_RETURN
SUCCESS = GT_SUCCESS.
regards,
Hiren Patel
Don't forget to Reward points

Problem camera Recording

Similar Messages

Maybe you are looking for