[Problem] Can't Connect Lenovo A806 with bluetooth
My A806 will not Connect through Bluetooth. When I try to push the Bluetooth button, it will not turn dark blue. Is there anybody With the same expirience?
Hi
''I know I have to install a special driver in order to do it (and enable USB Debugging, which i did) but i couldnt find the right one.''
...You're using Windows, I suppose
You need the same drivers(phone drivers and MTK ADB VCOM drivers) as for the PC Flash Tool.
http://www.chinaphonearena.com/forum/Forum-MTK-General-Tools
*When installing VCOM drivers on Windows 8 you need to disable driver Signature(drivers are generally unsigned).
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Similar Messages
-
[Problem] Can't Connect Lenovo A806 (Golden Warrior) to Eclipse
Hello to everyone! Happy to be here! I encounter a problem with my Lenovo A806 (Golden Warrior). I try to develop applications in this phone but i can notconnect my device in order for Eclipse to recognize it. I know I have to install a special driver in order to do it (and enable USB Debugging, which i did) but i couldnt find the right one.Isearch the web for other solutions but I only found solutions for other Lenovo series that seems I cant apply in this Lenovo series. Can Anyone help me please? Thank you in Advance!
Hi
''I know I have to install a special driver in order to do it (and enable USB Debugging, which i did) but i couldnt find the right one.''
...You're using Windows, I suppose
You need the same drivers(phone drivers and MTK ADB VCOM drivers) as for the PC Flash Tool.
http://www.chinaphonearena.com/forum/Forum-MTK-General-Tools
*When installing VCOM drivers on Windows 8 you need to disable driver Signature(drivers are generally unsigned).
Hope this helps. -
Hi Guys, I'm running snow leopard 10.6.3 recently had update which left me with a DMSL launch problem. Re installed software and now can't connect to Internet with cable or wifi ! can see network and router. Have tried many things and now pulling my hair out !
recently had update
Care to share which update?
Have tried many things
Care to share?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios. -
Can't connect to itunes with iphone and followed all toubleshooting problems!!
can't connect to itunes with iphone and followed all toubleshooting problems!!
Try taking a look at this Apple doc -> iOS: Unknown error containing '0xE' when connecting to a Windows PC
It should be able to help with that error. -
Hey guys I am having a problem. Could you guys give some suggestion? I can connect personal hotspot from iPad 5 to iPhone 5s via Bluetooth but the wifi doesn't recognize and can't connect. USB and Bluetooth sharing of hotspot is okay but wifi doesn't
troubleshooting hotspot http://support.apple.com/kb/TS2756
-
How can i connect iphone 4 with other mobile through bluetooth
how can i connect iphone 4 with other mobile through bluetooth
You can't. iPhone does not have this feature.
Some iOS apps will allow you to connect to other iOS devices for peer-to-peer games, or sending photos, but not to other makes of phone. -
Dear All,
My iPad (4th gen) Wi-Fi Serial Number: DM*******184; Problem: can not connect Wi-Fi, just keep connecting...
Appreciate your advice.
Thanks and regards,
Linh Hua
(Vietnam)
<Edited By Host>Is this happening with one particular network or with all? Make sure iOS is updated on the device.
Try this:
Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
Reset Network Settings
Go to settings/general/reset/reset network settings. Then try to connect to network.
If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions). -
Satellite L20-101: can't connect my TV with the svhs
Hi dudes,
i have a problem.
I have a L20 - 101 and i can't connect my tv with the svhs exit of my toshiba.
I reinstalled drivers for motherboard and videographics, what can i try?
thanksOk, sounds like a really un-nice problem.
So, how do you try to switch to the TV? You have the option in your display properties, but does the machine *recognize* the TV? You have also the key combination FN+F5 to change the display, did you already tried it?
And regarding your display drivers (which vga do you have? nvidia or ati?)
You can take a look here to find the latest working drivers for mobile platforms:
http://www.laptopvideo2go.com/
http://www.omegadrivers.net/
Good luck buddy -
Can't i exchange files with bluetooth blackberry
Why can't i exchange files with bluetooth blackberry i am getting a error message saying " cannot connect the device"
Hello,
Please provide the exact steps you are conducting, on both devices, in the exact order you are making the attempt. Also, are both devices BBs? Further, please provide the exact OS level (all 4 octets please) of the BB's that are involved in the attempt.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Has ANYONE successfully connected a printer with Bluetooth?
I recently purchased a D-Link 120 and was unsuccessful connecting it to my printer with D-Link's 320. I was told by D-Link the -320 will not work with a multifunction printer.
I am set to purchase a new printer with a printer adapter from the same manufacturer....ie Canon MP500 and Canon bluetooth BU-20.
Perusing this discussion forum reveals many unanswered questions relating to connecting a printer with bluetooth. Before I purchase another printer, can anyone offer some assurances that this is, in fact, possible with OSX? TIA.
Kerry737
iMac G4 Mac OS X (10.4.4)
iMac G4 Mac OS X (10.4.4)i did for about 6 weeks. i have the ambicom bluetooth printer adapter from comp usa. its on an epson rx500 photo printer. it's made for pcs, BUT it worked on the mac since the mac already had bluetooth capabilities...when i got my harddrive upgraded and osx had to be reinstalled, it no longer worked. i updated osx to the latest version, just like before the harddrive upgrade. my computer still scans for and finds the printer, but says that a necessary driver cannot be found. there was no additional driver ever installed by me, since the adapter only came with pc software in the first place. i just plugged it in and it worked. now no one can figure out what happened.
ibook G4 Mac OS X (10.4.4) -
Can't connect to websites with any browser. Bookmarks do not work but bookmarks through bookmarks edit works just fine.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
Can't connect to itunes with nano
can't connect to itunes with nano
Okay, seems that it is a general (and basically nikeplus-) problem today: http://forums.nike.com/thread.jspa?threadID=9767&tstart=0
Hope, it will be fixed soon! -
Can't connect to wifi with my iPad
can't connect to wifi with my iPad
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
HT4972 can't connect to network with linksys e2500
Can't connect to network with linksys E2500. Can anyone help me?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Can't connect to hotspot with my iPad, picks it up but unable to connect. Any sugestions?
When Access Connections fails to connect it asks if I want to configure the network and there's a bunch of settings. Connection type: infrastructure or Adhoc, Wireless security type "use static WEP keys", "Use Wi-Fi protected Access - Pre Shared Key (WPA-PSK)" - I choose it and under Properties there's more options. Access point authentication, WPA-PSK or WPA2-PSK; I've tried it both ways. Data encryption: TKIP or AES, I've been using TKIP. Under Pre-Shared Key, there's the only box I see to enter a password, so I enter the password there.
Chances are pretty good that the problem is the network configuration of your PC and not the AirPort Extreme Base Station (AEBS). What configuration options you choose will depend on how you set up the AEBS's wireless network, but the following can be used as a guideline:
o Connection Type: Infrastructure
o Wireless Security Type:
AirPort Setting = PC Setting
o WEP = WEP
o WPA Personal = WPA-PSK w/TKIP
o WPA2 Personal = WPA-PSK w/AES
Maybe you are looking for
-
Pleas what is wrong with this query select h.business_unit_id bu, h.edi_sequence_id seq, d.edi_det_sequ_id dseq, s.edi_size_sequ_id sseq, h.po_number po, h.total_unit tUnit, h.total_amount tDollar, s.quantity qty, s.unit_price price, (select (ca
-
Adding a print button to iProcurement Requistions View page
Hi, I have a requirement where I need to add a print button or link to all requesitions that have been approved . This button/link need to invoke a custom Oracle report passing the relevant parameters in this case the requisition number. I have seen
-
If my screen gets too big to use what do i do?
Hi I would like to know how to fix my phone the screen has got too big for me to access it
-
I am about to make a slideshow/movie for my sister's wedding that includes photos, music, and text/titles. Is imovie the best for this? keynote? or perhaps some other app I am unaware of? Thanks for your input!
-
How i can change port that oracle web server listen on in 10gEx
Hi Thank you for reading my psot How i can change the port 8080 that oracle web server listen on it ? I have other server listening on this port and i can not change that port. I have oracle 10g Express edition