Problem: Can't edit any table values

Hi,
I'm using the latest version of Oracel SQL Developer in XP and cannot edit any table values (ie: the actual data). I've tried the reset of Accelerators as previously suggested to no effect. I know the user has access since TOAD and DreamCoder all allow edits.
Any ideas?
Cheers,
Peter

I was trying to edit by double-clicking the field, which opens an Edit box. And then I had believed I could type a new value in? This was behaviour I was used to in Toad so I appreciate I may be doing it incorrectly.
Is this not the correct way to edit a value? (without using SQL).
EDIT: I re-read you're reply and I see what you mean. Going to Table> MyTable > Data (tab) I can add rows and such. But this seems to mean I can't execute an SQL query to pullback specific data and then edit it in-place, in the grid?
Cheers,
Peter
Edited by: [email protected] on 14-May-2009 08:05

Similar Messages

  • How can I edit a table in my iPhone?, How can I edit a table in my iPhone?

    I've set up a table in a pages document on my MacBook Air.  I've shared the document to iCloud.  I open the document in Pages on my iPhone, but can't edit any cell in the table. I can select a cell but my only option is to paste.  The iPhones keyboard does not display.
    Any ideas?
    Thanks.

    Restore from a previous backup. There is no way to roll back a restore other than using a backup made fprior to that restore.

  • Can't edit any files anymore - DTR is grayout in NWDS

    Hi Experts,
    For some reason I can't edit any files anymore, i.e. when right click on order.jsp, DTR is grayout. Seems like it happened after I reinstalled NWDS and reimported projects. I tried Sync sources, it did not help.
    Any suggestions / advises?
    Thanks, Jin

    Hi,
    Right now do you have any open activities? If so, is it on the same jsp file?
    If you have a open activity, obviously you will not edit option for the same file again.
    If that is not the case, there might be an update in your track. You need to perform "Update Configuration" on your track. go to Inactive Dc's -> Right click on your track and select "Update Configuration".
    You can also try, Closing and re opening the NWDS and logging in to NWDI again.
    Hope this helps!
    Regards,
    Jaya.

  • Can't edit any files anymore - DTR is  in NWDS

    Hi Experts, 
    For some reason I can't edit any files anymore, i.e. when right click on order.jsp, DTR is grayout.  Seems like it happened after I reinstalled NWDS and reimported projects.  I tried Sync sources, it did not help. 
    Any suggestions / advises?
    Thanks, Jin

    ok now

  • Can I edit condition table ?

    hi
          Actually my requirement is that I want to change condition table .
    In that previous condition table I want to add One field .(without creating another table)
    I am try  to add field in v/03 but this generate another table no.
    that I don't want .
    I want make changes in previous table.
    If my condition Table is < 501 then what happen
                                  & if  > 500 then what happen
    I want for both.        
    please help
    thank you.

    thank you Kapil
                   you mean we can not edit standard table (which is less than 501).
    ok I agree.
    but suppose I am creating one condition table (which is greater than 500 )
    then suppose I miss one field & table is created.
    then I want to edit that table.
    Will it possible in same table?
    If yes then How?
    please help me
    thank you Once again.

  • How do I change the color of my Google calendar? I can't edit any of my calendars.

    I just recently activated my iPhone 6 and was able to successfully transfer everything from my old iPhone to the new one.
    I used Google to sync my mail, contacts, and calendars, but for some reason, I cannot edit any calendars.  When I open the Calendar on my iPhone, I click on "Calendars" on the bottom.  Once I am here, I click on "Edit", but cannot click on any of my calendars. The names of my calendars show up, but are light gray colored.  I need to change the colors because for some reason, they are all dark colors and I cannot differentiate between them.
    Did I set up my calendar wrong?  Please help.

    I have the same issue on my iPad mini (running iOS 8.1). This problem only occurs with Google calendars. You can see in the attached screenshot that I don't have the problem with other calendars (see Microsoft live.com calendars).
    I have tried adding my Google account as Gmail, Exchange and CalDAV and I see this problem in every case.

  • Anyone else having this problem? Region Editing problems, can't edit or see in editor.

    Hello,
    I'm using FCPX and i' having region issues, first of all i can't edit the region with the mouse as in pull it from the left or right to make it longer the whole region moves as if i clicked in the middle, then when i doucle click on it i'm not able to edit it i don't even see the waves, i'm sure these two problems are connected. I also can't copy and paste without the original region disappearing although I have found a work around for that, any ideas?

    You're using Logic Pro X not FCP. You need to use the Logic forum.

  • Create CMP Entity Beans from Tables Wizard - Can't see any tables with DB2

    Hi,
    I'm trying to use the "Create CMP Entity Beans from Tables Wizard" to create an entity from a table in a DB2 database. The problem is, on page 2, I can't see any available tables. I have verified that the connection works (I can open the connection in the Navigator frame and I can see that table).
    Note that if I try this wizard on an Oracle database, I can see tables.
    WTF? Can someone please help?

    I second the motion. I too work in an environment with centralized data management (DBA's) that create and maintain all tables under a generic schema. This has prevented me from using the Create Entity Beans from Table feature of Jdev r3 preview.
    At least I can see that I'm not alone.
    Thanks
    When I select the "Create CMP Entity Beans from Tables Wizard," no tables or views are available to select. The JDev database connection is using an ID assigned to me.
    The tables that I am looking for were created by the DBA under his ID and are therefore in that schema. He did create Public Synonyms for them, but the tables still do not show up in the wizard.
    Is there a configuration step that I need to do to have those tables show up?
    Tables created by a DBA and then accessed by developers using a public synonym is a very common scenario and should be supported by JDeveloper (IMO).
    Thanks.
    I'm using JDev 9.0.2.8.2.

  • I just recently got a new laptop and transfered everything over and it seemed to be ok but now having issues playing videos and can't edit any of my song info in music files

    I just got a new laptop so I had to transfer everything over and I thought everything would be ok but I'm having some strange issues especially with my purchased tv shows, movies, and music videos. They just wont play. Sometimes I'll get lucky and a tv show will play but if I stop it and try again it wont. If I open in Quicktime it works fine. The computer is authorized so that shouldnt be it especially if it plays in QT and like I said sometimes I'll get lucky and one will play. Now the other thing I just noticed is all my music files play fine but when opening and looking at the info of the music file I can't edit anything for example song title or artist the area seems shaded and won't let me do any editing. So I'm having those 2 issues. Video files not playing ones that I have purchased. movies, tv shows and music videos. Also like I said if I just sit there and click one after another I may get lucky and one will play but if I stop it and try again it will not play again. And I can't seem to edit any music file which play fine. I have a new Dell with windows 7 and I have never had this happen any help would be great. The computer is authorized for i tunes so it cant be that.

    Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and system full control to this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows 7 shouldn't be too different.
    tt2

  • Citrix problem - can anyone offer any advice please ?

    I'm trying to connect to work (Windows environment) with Citrix ICA Client 7.00.407. I use a VPN connection to the server which works fine, and then I try to access a Published Application through ICA client.( This is what I've been instructed to do by my IT people).
    I manage to get as far as the grey window where it says "Checking your Credentials" (which I put into the client editor beforehand) when I get a message saying that I must have Terminal Server User Access permissions to log on to this remote computer. I click OK and the Citrix client quits.
    My IT dept. have assured me that I have these Terminal Server User Access permissions. That's the point when look upon my Mac like an alien and cannot help any further.
    Can anyone offer any suggestions please ?
    Paul

    Did a BT speed test as per instructions on forum reults below:  Speed is slower than normal usually get 12-13.5 Mbps
    1. Best Effort Test: -provides background information.
    Download Speed
    8.27 Mbps
    0 Mbps 21 Mbps
    Max Achievable Speed
    Download speedachieved during the test was - 8.27 Mbps
    For your connection, the acceptable range of speeds is 4 Mbps-21 Mbps.
    IP Profile for your line is - 8.38 Mbps
    2. Upstream Test: -provides background information.
    Upload Speed
    0.68 Mbps
    0 Mbps 0.83 Mbps
    Max Achievable Speed
    Upload speed achieved during the test was - 0.68Mbps
    Additional Information:
    Upstream Rate IP profile on your line is - 0.83 Mbps
    We were unable to identify any performance problem with your service at this time.
    It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
    If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
    Please visit the FAQ if you are unable to understand the test results.

  • Phonic Firefly 302 problem, can't recieve any audio signal

    Having some trouble getting any audio levels into garageband from my PF 302 firewire interface. The computer is an I-Mac running 10.4.10. According to the instructions for the Firefly I don't have to download any drivers or software, is this true?
    I went into the Utilities folder then to Audio/Midi and changed the Inputs to the Firefly 302 but it won't let me change the volume input on the individual channels. They are faded out and I can't access them, what gives? Is this why I can't get any audio in from the mic?
    I have signal on the input indicator lights on the Firefly and when I changed the output to the Firefly I could see the metronome reading on the firefly's indicator output lights so I know the computer and firefly are talking to each other.
    Is there some setting I'm missing somewhere? Any help would be greatly appreciated. By the way if you haven't noticed by my "highly technical" jargon I'm new to mac's and digital recording altogether. Thanks again!!

    alright, so i'm not an expert, but i'm presuming your using the firefly 302 plus, your using the mic input on the front of the firefly, then what are you using for output? the headphone jack or the 1/4 out on the back? So what you need to do is make sure the green lights are on on the front of the firefly, if the red lights turn on, that means your signal is clipping. so you want to have the highest signal you can while not hitting the red on your firefly. Then you should select the firefly in your preferences/audio midi/audio input, but keep the audio output built in output or whatever speakers you use. The next thing is to make sure the track you want your voice on is a real instrument track and that the little dot on the left of the track is red, and the lock a little to the right of it is NOT green. Then if you don't get a strong signal, check the volume levels on the firefly, and in garage band, and if you still are having problems try pushing the +48 phantom power button on the firefly. If that doesn't work I need to know what your using to connect the firefly to your mac.
    Hope that helps Jamie

  • How can I edit a table in a pdf document?

    I'm in data entry and I have to make reports that are generated in a pdf document. I use this program called PROMIS that I access through the internet to enter attendance among other things. At the end of each month I need to make a report of the attendance of that month and a blank report. The table that is generated in that blank report is the one that I wish to edit, make the columns and rows bigger to be more specific. Is there a way to edit the table in Acrobat Pro or another program? I tried to export the file as a Word document to edit it in Word but I get this error:
    Acrobat was unable to make this document accessible because of the following error:
    Bad PDF; error in processing fonts. <unsupported Type2 font> [1]
    Please note that some pages of this document may have been changed. Because of this failure, you are advised to not save these changes.
    I have Acrobat Pro 9.3.4 on a Mac with Snow Leopard and I have Office 2008 for Mac.

    Hi Naveenraju,
    You will need Acrobat Pro for that. This Help document has all the information that you need: Acrobat Help | Edit images or objects in a PDF
    Please let us know how it goes.
    Best,
    Sara

  • I can't edit any photos. Try to crop but just moves the whole picture?

    I can't edit photos. I select the crop tool but the mouse pointer just drags the whole image rather than create a box for the crop area? Even the in built photos/projects can't be edited. Nothing seems to work. I select the folder in the projects inspector but the folder contents don't apear in the browser, although individual images appear in the main window, eventually. Begining to think the software is dud or not compatible with the my mac operating system? I've tried re-installing the software.

    Have you tried the Troubleshooting Basics found here: http://support.apple.com/kb/HT3805

  • Can't open any tables in 4.0EA3

    I just upgraded to 4.0EA3 from version 1.5.5 (our company was a little out of date with its tools).
    Really love the ability to jump to a procedure body from the definition.
    Love a lot about the new IDE, except I used to be able to double click a table in the connection tree and automatically open a tab for the table showing Columns, Data, Constraints, etc.
    Since I installed EA3 and imported my settings that doesn't work.
    If I right click on a table all I get is the option to Export...,  Spatial>, and Quick DDL>.
    All the other normal options are gone.
    Is there some preference that is not set?
    My coworkers are having no problems this way.
    Message was edited by: 2fcd5242-e605-4f95-a36b-9e8e4ae11988

    I used to be able to double click a table in the connection tree and automatically open a tab for the table
    Of course, the double click should work.  Even better: Tools > Preferences > Database > Object Viewer > Open Object on Single Click
    If I right click on a table all I get is the option to Import Data, Export DDL, or Export Data.
    All the other normal options are gone.
    Totally unexpected.  If anything strange like this happens, the first question is always "Did you install into an empty directory?"  Never overwrite an existing directory containing an prior SQL Developer install.
    Is there some preference that is not set?
    Migrating user settings between consecutive releases usually works fine, but migrating from such an early release may be problematic -- kind of a "bridge too far" scenario.  Whenever something strange like this happens to me (since I always install into an empty directory), I always
    1. Exit the product
    2. Erase the migrated user settings directory structure
    3. Open the product again without migrating settings -- the connections can always be exported from the old version and imported into the new separately.
    Hope this helps,
    Gary
    SQL Developer Team

  • How can I edit a table during a presentation?

    I'd like to use Keynote for a "game show" style activity at my school.  I created a presentation in Keynote that contains one slide with a large table.  During the presentation I would like to edit the contents of some of the table cells without going into edit mode and staying in the presentation slide show mode. I would like to click or double-click on a table cell and edit the text in the cell right on the slide during the presentation.

    This is not possible in Keynote.
    Keynote must be in edit mode, not play mode to add data to a table.
    Adobe Flash Professional can do this but is not the easiest to learn how to use.
    Adobe products
    A work around using Keynote is to blank (black screen) the projector or colour display, enter the new data in edit mode then restart Keynote then unblank the projector again.

Maybe you are looking for