Problem Capturing - Out of Disk Space

I posted this in another thread, but after trying various things, I realized my problem was different. I need to capture about 38 minutes of video to my computer. My external HD (which I'm capturing to) has 43.43 GB free and my internal HD has 9.55 GB free. I read that the internal HD needs to have at least 10% free. It's an 80 GB HD, so I have more than 10% free. When I go to capture, after about 9 and a half minutes, it gives me an error saying that there's not enough disk space. When I go to my external HD to delete the partial video I captured, it's almost exactly 2 GB. It seems to stop capturing at 2 GB for some reason.
Sorry if this is posted already, but I need to figure this out ASAP.
Thanks,
Kevin

Thanks for the replies...
@2reverb - my external HD is formatted for FAT32 so I can use it on Windows machines, too. This has never caused a problem with capturing footage.
@gogiangigo - my capture limit is turned off and my minimum allowable free space is 1024 MB.
Yes, I am using Capture Now.
My external HD stays at a steady 45 GB (roughly) at the rate that I start and finish projects.
@Studio X - if that's the case, is there a way to reinstall QuickTime? I don't think I can afford to reinstall my OS (considering the amount I need to backup won't fit on my 43.43 GB external).
I would like to get a more powerful computer than a MacBook and I definitely need a new external HD, but I really don't have the money for either. I guess I'll finish the projects that I am working on and (after deleting the project files) see if I can do it then.
-Kevin
Message was edited by: nothngupmysleeve

Similar Messages

Problem: Final Cut Pro X inaccurately reports "Out of disk space", when I have 333GB free.

Problem: Final Cut Pro X inaccurately reports "Out of disk space", when I have 333GB free.
Trying to "share" the compound clip I've created as an mp4 1080p file.

Editing MP4 media can create all sorts of havoc with FCP.
Convert the clips to .mov files – either Compressor or MPEG Streamclip will do that – preferably in Pro Res 422
Russ

"Error:Out of Disk Space" message. Why?

I've been using an Apple G4 with FCP2 to capture footage through a Sony DSR-11 deck. I've set up a LaCie 500GB 7200, with most of its 500GB available, as capture disk. As late as last summer I used this system to capture 70+ hours of footage which was then edited on another system.
This time I've met only problems. I've tried capturing 5 different DV tapes. They seem to be capturing but at the end of the hour I get the message "Error: Out of Disk Space".
Does anyone know why this might be happening? I've checked the set up and everything seems in order. (These tapes are 4:3, the ones captured last year were 16:9 DV, so the only adjustment I had to make was un-checking "anamorphic".) I even tried capturing to the MAC hard drive to see if the problem was the LaCie drive, but I get the same same message. (The LaCie I've been using had been full with last year's capture scratch and the disk had been erased through LaCie's Silverlining program, so for a while I began to think that this may be the problem; that maybe I'd have to reformat the disk, etc. but this test seems to rule that out.)
Thanks.
John

Since I last wrote I’ve changed hard drives, run tests on them, as well as trash my preferences, which I did earlier. Still, if I try to capture a tape (to disks with up to 460 GB available) I get the message “Error: Out of Disk Space”. The only thing I can think of doing now is deleting and then reinstalling the Final Cut software.
Here I’m kind of dumb and don’t want to make any mistakes. This Apple has been a stand-alone computer used only for Final Cut and the software was installed when I got it. The rest of my life has been conducted on a PC. So is there anything I should do before deleting Final Cut? Should I be doing anything to protect exiting project files, captured clips, thumbnail cache etc.? Will Final Cut just recognize these when I re-install? What do I do? Just open the Mac hard drive, identify the Final Cut application and drag it to Trash? Do I need to empty the trash first or should I leave it there for safety?
I look at the instructions that came with my ancient Final Cut 2 disks. Here’s what they say in full:
To install QuickTime, follow these steps
1) Insert the Final Cut Pro CD in your CD drive. (I see I have two disks: one “Final Cut Pro 2”, the other “Final Cut Pro 2:Tutorial Media” Do I need to install the second?)
2) Double-click the CD’s icon, then double-click the QuickTime Installer folder.
3) Double-click the QuickTime Installer icon and follow the onscreen instructions.
4) When the Choose Installation Type window appears, select Custom, then click Continue.
5) In the next window, click Select All, then continue
This replaces any previous versions of QuickTime and ensures a complete installation of all components required by Final Cut Pro.
6) When a message appears saying installation was successful, click Restart.
Is this all straightforward or might there be any potential pitfalls in the above instructions for someone unfamiliar with installing software on a Mac (In my case old software and an old Mac – a G4)? I guess I should also ask if you folks out there agree that re-installing Final Cut may be the answer to my problem, that this error message is the result of a glitch that has arisen in the installed version of Final Cut.
Thanks in advance for any help.
John

Running out of disk space in c drive

Hi,
i'm new to OBIEE, i installed obiee 10.1.3.4 on my computer , i'm doing practice on sample sales. every day i could see message running out of disk space, daily i'm purging cache entries and deleting sessions in UI, and also deleting temp files in oracle BI data, but still i'm facing this problem.
could anyone give me more ideas.
Your valuable suggestions are appreciated.

iTunes prefs - Advanced.
Set the *iTunes media folder location* to the external drive.
Make sure *Keep iTunes media folder organized* and *Copy files to iTunes media folder ...* are both checked.
Then go to iTunes menu File > Library > Organize library - Consolidate.
This will copy everything in iTunes to the new location.
After it is complete, quit iTunes then delete \Music\iTunes\iTunes media\ folder.

Dense Restructure 1070020 Out of disk space. Can't create new data file

During a Dense Restructure we receive: Error(1070020) Out of disk space. Cannot create a new [Data] file.
Essbase 6.5.3 32-bit
Windows 2003 32bit w/16GB RAM
Database is on E: drive with 660GB space total, database is ~220GB.
All cubes are unlimited
Tried restoring from backup same problem.
Over years and years the database is never recalculated, never exported and imported, never verified. Only new data loaded and dense restructured.
Towards the end of a dense restructure (about 89 pan files through about 101 2GB pag files), getting an error: Error(1070020) Out of disk space. Cannot create a new [Data] file.
There are still several hundred GB of free space available, and we can write to this free space outside of the essbase application within windows.
The server's file system is consistent, defragmented, and can prove use of additional space. Hard drive controller and system does not report any "hardware issues".
Essbase.cfg file
; The following entry specifies the full path to JVM.DLL.
JvmModuleLocation C:\Hyperion\Essbase\java\jre13\bin\hotspot\jvm.dll
;This statement loads the essldap.dll as a valid authentication module
;AuthenticationModule LDAP essldap.dll x
DATAERRORLIMIT 30000
;These settings are here to deal with error 1040004
NETRETRYCOUNT 2000
NETDELAY 1600
App log
[Sat Oct 17 13:59:32 2009]Local/removedfrompost/removedfrompost/admin/Info(1007044)
Restructuring Database [removedfrompost]
[Sat Oct 17 15:48:42 2009]Local/removedfrompost/removedfrompost/admin/Error(1070020)
Out of disk space. Cannot create a new [Data] file. [adIndNewFile] aborted
[Sat Oct 17 15:48:42 2009]Local/removedfrompost///Info(1008108)
Essbase Internal Logic Error [7333]
[Sat Oct 17 15:48:42 2009]Local/removedfrompost///Info(1008106)
Exception error log [C:\HYPERION\ESSBASE\app\removedfrompost\log00002.xcp] is being created...
log00002.xcp
Assertion Failure - id=7333 condition='((!( dbp )->bFatalError))'
- line 11260 in file datbuffm.c
- arguments [0] [0] [0] [0]
Additional log info from database start to restructure failure
Starting Essbase Server - Application [removedfrompost]
Loaded and initialized JVM module
Reading Application Definition For [removedfrompost]
Reading Database Definition For [removedfrompost]
Reading Database Definition For [TempOO]
Reading Database Definition For [WTD]
Reading Database Mapping For [removedfrompost]
Writing Application Definition For [removedfrompost]
Writing Database Definition For [removedfrompost]
Writing Database Definition For [TempOO]
Writing Database Definition For [WTD]
Writing Database Mapping For [removedfrompost]
Waiting for Login Requests
Received Command [Load Database]
Writing Parameters For Database [removedfrompost]
Reading Parameters For Database [removedfrompost]
Reading Outline For Database [removedfrompost]
Declared Dimension Sizes = [289 125 2 11649 168329 1294 622 985 544 210 80 2016 11 9 9 8 8 1 1 6 1 3 1 2 2 1 2 1 2 77 2 65 1 1 1 1 1 1 1 1 1 1 1 260 4 3018 52 6 39 4 1577 6 ]
Actual Dimension Sizes = [289 119 1 1293 134423 1294 622 985 544 210 80 2016 11 9 9 8 8 1 1 6 1 3 1 2 2 1 2 1 2 77 2 65 1 1 1 1 1 1 1 1 1 1 1 260 4 3018 52 6 39 4 1577 5 ]
The number of Dynamic Calc Non-Store Members = [80 37 0 257 67 ]
The number of Dynamic Calc Store Members = [0 0 0 0 0 ]
The logical block size is [34391]
Maximum Declared Blocks is [1960864521] with data block size of [72250]
Maximum Actual Possible Blocks is [173808939] with data block size of [17138]
Formula for member [4 WK Avg Total Sls U] will be executed in [CELL] mode
Formula for member [Loc Cnt] will be executed in [CELL] mode
Formula for member [OH Str Cnt] will be executed in [CELL] mode
Formula for member [Current Rtl] will be executed in [CELL] mode
Essbase needs to retrieve [1017] Essbase Kernel blocks in order to calculate the top dynamically-calculated block.
The Dyn.Calc.Cache for database [removedfrompost] can hold a maximum of [76] blocks.
The Dyn.Calc.Cache for database [removedfrompost], when full, will result in [allocation from non-Dyn.Calc.Cache memory].
Writing Parameters For Database [removedfrompost]
Reading Parameters For Database [removedfrompost]
Unable to determine the amount of virtual memory available on the system
Index cache size ==> [1048576] bytes, [128] index pages.
Index page size ==> [8192] bytes.
Using buffered I/O for the index and data files.
Using waited I/O for the index and data files.
Unable to determine the amount of virtual memory available on the system
Reading Data File Free Space Information For Database [removedfrompost]...
Data cache size ==> [3145728] bytes, [22] data pages
Data file cache size ==> [0] bytes, [0] data file pages
Missing Database Config File [C:\HYPERION\ESSBASE\APP\removedfrompost\removedfrompost\removedfrompost.cfg], Query logging disabled
Received Command [Get Database Volumes]
Received Command [Load Database]
Writing Parameters For Database [TempOO]
Reading Parameters For Database [TempOO]
Reading Outline For Database [TempOO]
Declared Dimension Sizes = [277 16 2 1023 139047 ]
Actual Dimension Sizes = [277 16 1 1022 138887 ]
The number of Dynamic Calc Non-Store Members = [68 3 0 0 0 ]
The number of Dynamic Calc Store Members = [0 0 0 0 0 ]
The logical block size is [4432]
Maximum Declared Blocks is [142245081] with data block size of [8864]
Maximum Actual Possible Blocks is [141942514] with data block size of [2717]
Essbase needs to retrieve [1] Essbase Kernel blocks in order to calculate the top dynamically-calculated block.
The Dyn.Calc.Cache for database [TempOO] can hold a maximum of [591] blocks.
The Dyn.Calc.Cache for database [TempOO], when full, will result in [allocation from non-Dyn.Calc.Cache memory].
Writing Parameters For Database [TempOO]
Reading Parameters For Database [TempOO]
Unable to determine the amount of virtual memory available on the system
Index cache size ==> [1048576] bytes, [128] index pages.
Index page size ==> [8192] bytes.
Using buffered I/O for the index and data files.
Using waited I/O for the index and data files.
Unable to determine the amount of virtual memory available on the system
Reading Data File Free Space Information For Database [TempOO]...
Data cache size ==> [3145728] bytes, [144] data pages
Data file cache size ==> [0] bytes, [0] data file pages
Missing Database Config File [C:\HYPERION\ESSBASE\APP\removedfrompost\TempOO\TempOO.cfg], Query logging disabled
Received Command [Get Database Volumes]
Received Command [Load Database]
Writing Parameters For Database [WTD]
Reading Parameters For Database [WTD]
Reading Outline For Database [WTD]
Declared Dimension Sizes = [2 105 2 11649 158778 1279 609 971 531 208 78 2017 11 9 9 1 1 1 1 6 1 2 1 1 2 1 1 1 2 77 1 1 1 1 1 1 1 1 1 1 1 1 1 260 3 2954 52 6 39 4 1581 6 ]
Actual Dimension Sizes = [1 99 1 1293 127722 1279 609 971 531 208 78 2017 11 9 9 1 1 1 1 6 1 2 1 1 2 1 1 1 2 77 1 1 1 1 1 1 1 1 1 1 1 1 1 260 3 2954 52 6 39 4 1581 5 ]
The number of Dynamic Calc Non-Store Members = [0 29 0 257 57 ]
The number of Dynamic Calc Store Members = [0 0 0 0 0 ]
The logical block size is [99]
Maximum Declared Blocks is [1849604922] with data block size of [420]
Maximum Actual Possible Blocks is [165144546] with data block size of [70]
Formula for member [Loc Cnt] will be executed in [CELL] mode
Formula for member [OH Str Cnt] will be executed in [CELL] mode
Formula for member [Current Rtl] will be executed in [CELL] mode
Essbase needs to retrieve [1017] Essbase Kernel blocks in order to calculate the top dynamically-calculated block.
The Dyn.Calc.Cache for database [WTD] can hold a maximum of [26479] blocks.
The Dyn.Calc.Cache for database [WTD], when full, will result in [allocation from non-Dyn.Calc.Cache memory].
Writing Parameters For Database [WTD]
Reading Parameters For Database [WTD]
Unable to determine the amount of virtual memory available on the system
Index cache size ==> [1048576] bytes, [128] index pages.
Index page size ==> [8192] bytes.
Using buffered I/O for the index and data files.
Using waited I/O for the index and data files.
Unable to determine the amount of virtual memory available on the system
Reading Data File Free Space Information For Database [WTD]...
Data cache size ==> [3145728] bytes, [5617] data pages
Data file cache size ==> [0] bytes, [0] data file pages
Missing Database Config File [C:\HYPERION\ESSBASE\APP\removedfrompost\WTD\WTD.cfg], Query logging disabled
Received Command [Get Database Volumes]
Received Command [Set Database State]
Writing Parameters For Database [removedfrompost]
Writing Parameters For Database [removedfrompost]
Received Command [Get Database State]
Received Command [Get Database Info]
Received Command [Set Database State]
Writing Parameters For Database [TempOO]
Writing Parameters For Database [TempOO]
Received Command [Get Database State]
Received Command [Get Database Info]
Received Command [Set Database State]
Writing Parameters For Database [WTD]
Writing Parameters For Database [WTD]
Received Command [Get Database State]
Received Command [Get Database Info]
Received Command [SetApplicationState]
Writing Application Definition For [removedfrompost]
Writing Database Definition For [removedfrompost]
Writing Database Definition For [TempOO]
Writing Database Definition For [WTD]
Writing Database Mapping For [removedfrompost]
User [admin] set active on database [removedfrompost]
Clear Active on User [admin] Instance [1]
User [admin] set active on database [removedfrompost]
Received Command [Restructure] from user [admin]
Reading Parameters For Database [Drxxxxxx]
Reading Outline For Database [Drxxxxxx]
Reading Outline Transaction For Database [Drxxxxxx]
Declared Dimension Sizes = [289 126 2 11649 168329 1294 622 985 544 210 80 2016 11 9 9 8 8 1 1 6 1 3 1 2 2 1 2 1 2 77 2 65 1 1 1 1 1 1 1 1 1 1 1 260 4 3018 52 6 39 4 1577 6 ]
Actual Dimension Sizes = [289 120 1 1293 134423 1294 622 985 544 210 80 2016 11 9 9 8 8 1 1 6 1 3 1 2 2 1 2 1 2 77 2 65 1 1 1 1 1 1 1 1 1 1 1 260 4 3018 52 6 39 4 1577 5 ]
The number of Dynamic Calc Non-Store Members = [80 37 0 257 67 ]
The number of Dynamic Calc Store Members = [0 0 0 0 0 ]
The logical block size is [34680]
Maximum Declared Blocks is [1960864521] with data block size of [72828]
Maximum Actual Possible Blocks is [173808939] with data block size of [17347]
Formula for member [4 WK Avg Total Sls U] will be executed in [CELL] mode
Formula for member [Loc Cnt] will be executed in [CELL] mode
Formula for member [OH Str Cnt] will be executed in [CELL] mode
Formula for member [Current Rtl] will be executed in [CELL] mode
Essbase needs to retrieve [1017] Essbase Kernel blocks in order to calculate the top dynamically-calculated block.
The Dyn.Calc.Cache for database [Drxxxxxx] can hold a maximum of [75] blocks.
The Dyn.Calc.Cache for database [Drxxxxxx], when full, will result in [allocation from non-Dyn.Calc.Cache memory].
Reading Parameters For Database [Drxxxxxx]
Unable to determine the amount of virtual memory available on the system
Index cache size ==> [1048576] bytes, [128] index pages.
Index page size ==> [8192] bytes.
Using buffered I/O for the index and data files.
Using waited I/O for the index and data files.
Unable to determine the amount of virtual memory available on the system
Data cache size ==> [3145728] bytes, [22] data pages
Data file cache size ==> [0] bytes, [0] data file pages
Performing transaction recovery for database [Drxxxxxx] following an abnormal termination of the server.
Restructuring Database [removedfrompost]
Out of disk space. Cannot create a new [Data] file. [adIndNewFile] aborted
Essbase Internal Logic Error [7333]
Exception error log [C:\HYPERION\ESSBASE\app\removedfrompost\log00002.xcp] is being created...
Exception error log completed -- please contact technical support and provide them with this file
RECEIVED ABNORMAL SHUTDOWN COMMAND - APPLICATION TERMINATING

To avoid all these things as a best practice
we didn't allow dense restructure on the cubes size>30 GB
As an altrnative, we will export the level0 data, clear the DB, and load the new data. After that aggregate the cube to store the data at all the consolidation levels.

"out of disk space" when trying to export

I'm working on a Macbook Pro and Final Cut Pro HD version 4.5. Here's the deal:
I'm trying to move a project into iDVD, so I'm exporting it as a Quicktime Movie. After about a minute of exporting, the "Error: out of disk space" window pops up. I have almost 3 gigs on my external drive which, I think, should be enough for the file.
On another post, someone with the same problem said it was a faulty timecode that made the project seem reeeaaallly long and the drive didn't have enough room for that long duration. I believe this might be the cause of my "error" because at the very beginning of my project the time code reads 01:00:00;00. If this IS the problem, how do I fix it? If not, what do I do?
I am a very amateur film editor and would very much appreciate any help!
Thanks.
Message was edited by: jraks

Two things:
1. That is not nearly enough of available space. At least 20 GBs is needed.
2. FCP 4.5 HD is a PPC app; you are running it on a Intel Mac. Not compatible and you will have issues. I'm surprised you were able to install it.

How to set the limit for the warning 'running out of disk space'

I am wondering if there's a way to set the number of GB before I get the system warning 'running out of disk space'.
I saw this question asked in 2010 and it did not get an answer. It was archived so I am asking again. I know how to monitor the available space on my startup disk, and how to empty the trash to clear up disk space. I am looking for an OS X setting that I can change.

My guess is that you want to lower the limit. IMHO I think the limit is alreay too low.
If you are seeing this warning regularly then your disk is severely overfull and needs to be replaced with a larger one.
Running the free space low eenough to get the warning greatly increases the chances for disk corruption. Once the disk gets corrupted then then next thing that happens is data lose.
You have a serious problem with your Mac that should be dealt with immediately.
Backing your data up would also be a good idea if you are not already doing that.
Allan

MXF export flagged as "out of disk space" - never finishes

Have an AVC-INTRA project which has a motion jpeg sequence in it. When I attempt to export the entire sequence as MXF - avc-intra 100 the export through media encoder stops between 50 and 65% and a message comes up by windows indicating that an application needs to close. Media Encoder CS5 5.0.1 does not complete the encoding and generates an error messege "out of disk space" However, there is ample space on the drive being used to export the project. Is there a file size limit to mxf export or duration limit to mxf export? DO NOT UNDERSTAND why this export is not completing!
Need help! Thanks.

At first I thought I had a rendering issue with mxf but discovered Premiere Pro CS5 was creating the CONTENTS folder for the mxf on the right drive as per panasonics requirements. Of course any sequence you export as an MXF file gets broken up into chunks in the contents folder. One concern I have is if there is a limit in length or file size that the export is being limited to. My sequence is 90 minutes in length. Or better yet is the MXF container running out of chunk names for the sequence thus terminating the export. Not sure on both. I remember back in 1.5 or 2 when there was a bug concerning rendering long sequences but I thought Adobe has gotten past those types of errors. Maybe not. I checked the project size and there doesn't seem to be anything unusually large or strange going on with the project size. This sequence is picture only with no audio. If anyone else has a long sequence I recommend trying this to see if you get the same results. Export should not be duration limited. The other area I am thinking could be a problem is with memory management. I've got 12 gigs of ram and I set media encoder to use a max of 9 gigs. I'm wondering is there is something loosing track of memory on a longer export. Created a new project and will try again. This is my fourth attempt today.
Rob

[nQSError: 46118] Out of disk space.

Hello,
I'm having this error: [nQSError: 46118] Out of disk space. after launching several (heavvy) reports.
The software configuration is an oracle bi 10.1.3.3.3 and oracle 10g db.
What does it mean? I know it means that there isn't space left but where? In the db machine or in the bi server (presentatio? server?) machine?
Is it a db problem? I don't think so beacuse there isn't an ORA-XXXX error code so i think is not an oracle error caught by the BI server and we discovered that clearing all cursors from the administration prevent this error to appear for a while.
Can someone tell me if is an Oracle Bi (Server? Presentation?) problem and how to solve it? Do i have to set a parameter somewhere to limit the cursors or to high the cache?
Thank you
Maurizio

Are you on Windows or Unix? If unix, what flavour?
If you're on unix, try this:
1) Just before running the reports, enter this command:
while [ 1 -lt 2 ]; do date;ls -lrt;bdf;echo "";sleep 5;done
(if not HPUX substitute bdf for df or whatever gives you the state of your filesystems)
2) Run your report
You'll get a snapshot every five seconds of how much space is available on your disk eg:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda3 18374532 8232104 9209052 48% /
/dev/sda1 194442 11691 172712 7% /boot
none 1037444 0 1037444 0% /dev/shm
If it were a permissions issue then I'd have thought you'd get a permissions rather than space error.
Is 10Gb the total free on the BI Server ? That's not a great deal of space. I've seen tmp files grow to 2Gb each, so you'd potentially only need a handful of users running big queries to break things.

DPM is out of disk space for the replica

Trying to make a bare metal backup of a phyiscal server running 2008 R2 SP1 . I've checked im not out of space. I've uninstalled and reinstalled the agent, I've manually tried to make the disk allocation larger same error.
DPM is out of disk space for the replica. (ID 58 Details: Internal error code: 0x809909FF)
This is in the event log on the Client machine
The backup operation attempted has failed to start, error code '2155348040' (There is not enough free space on the backup storage location to back up the data.). Please review the event details for a solution, and then rerun the backup operation once
the issue is resolved.
I have several other machines doing bare metal backups they are virtual but I can't see why that would be any different. They have no problems doing this. I have seen hacks on the internet editing xml files to get this to work changing allcritical to "C:".
I'd like an actual fix for this please?

Mike quick question. How can I determine which share my particular server is using to backup to? Here is what I get when I try to do a DIR on the folder as system
C:\Windows\system32>whoami
nt authority\system
C:\Windows\system32>dir
\\kdnap-util1\0ae3c77eaab54ea09b0724737a125f48
Access is denied.
C:\Windows\system32>dir
\\kdnap-util1\12068c1992634c92addf44bfbee5cada
Access is denied.
I was just trying to poke around to browse the folder to see which one to back it up to . But with the access denied error this isn't helpful :)
Here is my list of shares
C:\Windows\system32>net view \\kdnap-util1
Shared resources at \\kdnap-util1
I also tried doing a DIR from a server that is backing up correctly on any of those shares listed above after running psexec and I get access denied from them as well so I guess thats normal
Share
name                        Type Used as Comment
0ae3c77eaab54ea09b0724737a125f48 Disk           0ae3c77eaab54ea09b0724737a125f4
8
12068c1992634c92addf44bfbee5cada Disk           12068c1992634c92addf44bfbee5cad
a
32d87ea3f0ea4570bd1ae215c818686d Disk           32d87ea3f0ea4570bd1ae215c818686
d
3429bef9926347babbf20bbb258fdec0 Disk           3429bef9926347babbf20bbb258fdec
0
5c9c98bbc69c4f0ab75df48e89f52fc3 Disk           5c9c98bbc69c4f0ab75df48e89f52fc
3
600460aa29bb4f198d0d0fb6b1636068 Disk           600460aa29bb4f198d0d0fb6b163606
8
62abc840b38444abaa9d8dc9bd43b852 Disk           62abc840b38444abaa9d8dc9bd43b85
2
6833cf7dec3e4f19a3bf7961d53c5ced Disk           6833cf7dec3e4f19a3bf7961d53c5ce
d
68437b942573463b9437a15056bccf7c Disk           68437b942573463b9437a15056bccf7
c
805320dcb886401fa3dc6a8213b3deec Disk           805320dcb886401fa3dc6a8213b3dee
c
8404f7468dea47ce9e92a99536ebe13d Disk           8404f7468dea47ce9e92a99536ebe13
d
8bcbc4deae44458da77fbe59661f60fb Disk           8bcbc4deae44458da77fbe59661f60f
b
9bc5182a9d6b43478b7c09062ee1c9b0 Disk           9bc5182a9d6b43478b7c09062ee1c9b
0
b588fc67397e4a5a81a15bb5b52dbe31 Disk           b588fc67397e4a5a81a15bb5b52dbe3
1
Backups                           Disk
bf941a02f6e847a095b03d01963b8df1 Disk           bf941a02f6e847a095b03d01963b8df
1
bfc06209ce514b939098a9fd701e05d7 Disk           bfc06209ce514b939098a9fd701e05d
7
BLAZELG                           Disk
d35de342510248a0a34dac84ecd55d08 Disk           d35de342510248a0a34dac84ecd55d0
8
df1658496f364923b25f615625254195 Disk           df1658496f364923b25f61562525419
5
dfc6d6061f314fabbed0fb144c18df7c Disk           dfc6d6061f314fabbed0fb144c18df7
c
e8fcdd5155c940bb8ecddd0e7a99be7b Disk           e8fcdd5155c940bb8ecddd0e7a99be7
b
ee23ec6bc709410a9cfce4759c935f8f Disk           ee23ec6bc709410a9cfce4759c935f8
f
f0f1272aeab7417d82a6473b3f8b3a91 Disk           f0f1272aeab7417d82a6473b3f8b3a9
1
library.old                       Disk
The command completed successfully.
OK figured out which share it is by viewing the sharename in the shared folders snap-in (mmc) it listed my server name which access on the share. its "600460aa29bb4f198d0d0fb6b1636068"

Running out of disk space error even tho I have 200GB free!!

Dear users,
I have a huge problem. I have dowloaded an application from the AppStore named "Virtual City" and once I try to play the game it crashes saying "Running out of disk space" even tho I have more than 200GB free on my hard disk.
I am using a MacBook Pro Mid April 2010 with Lion latest version.
What could be the problem??
Thanks in advance.
A.

Did you try to reset your phone by holding the sleep and home button until the Apple logo comes back again?
Do you have an "other" section on your phone, bigger than 1GB? If yes, try to restore the phone to bring it back to normal size, it might contain corrupt data from an unsuccessful sync.

Running out of disk space on root partition

Hello,
I'm running gnome 3 and every time I boot and logon with my user I'm getting a warning that my root partition is running out of disk space (~350MB free out of 7.5GB). This seems really strange to me since I've not installed very much software. I've got a 1TB hard drive and the big things are stored in my home directory.
# df -h
outputs:
Filesystem size used free used% mounted
udev 10M 0 10M 0% /dev
run 10M 168K 9,9M 2% /run
/dev/disk/by-uuid/072ba75b-a418-4795-ac0b-965815573010 7,3G 6,6G 357M 95% /
shm 2,0G 444K 2,0G 1% /dev/shm
/dev/sda1 99M 17M 78M 18% /boot
/dev/sda4 910G 131G 733G 16% /home
/dev/disk/by-uuid/072ba75b-a418-4795-ac0b-965815573010 seems a little bit odd to me there although I don't have much experience using linux based systems.
# ls /dev/disk/by-uuid/072ba75b-a418-4795-ac0b-965815573010 -l
# lrwxrwxrwx 1 root root 10 (...date and time ...) /dev/disk/by-uuid/072ba75b-a418-4795-ac0b-965815573010 -> ../../sda3
and tab completion lists the files of my home directory. What's going on here?

Inxsible wrote:
ChoK wrote:/usr should not be on a seperate partition anymore. Some programs assume it's on the same partition and fail sometime silently sometime badly.
What ?? That's the first I have heard of this. What programs fail? Any examples?
With sysvinit in Arch, this isn't such a big problem, but we're slowly starting to see evidence that this is becoming a worse and worse idea. In particular, if you set a non C locale for daemons, you will not be able to shut down cleanly, as mount(8) is trying to reference files in the locale cache (on /usr) and can't unmount /usr.
Example bug report: https://bugs.archlinux.org/task/25149
If you're using systemd, /usr on a separate partition is flat out not allowed. We're getting into the realm of filthy hacks ahead in order to try and support this -- see Tom's late comments in the above bug report.
Oh, and be on the lookout for a cache cleaning util in pacman-contrib (name pending):
http://mailman.archlinux.org/pipermail/ … 13926.html
Last edited by falconindy (2011-07-27 20:48:14)

My Mac is showing that I am out of disk space. It says I have 175 MB of videos. I cannot find any videos in Itunes, Imovie or IPicture. What gives?

My Mac is showing that I am out of disk space. It says I have 175 MB of videos. I cannot find any videos in Itunes, Imovie or IPicture. What gives?

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Running out of disk space -- best way to remove Xcode/Dashcode?

Hi,
I am running out of disk space and looking for ways to get some back. Actually, the problem is that the update to Leopard is requiring 1.9GB of free space and I only have 1.5GB. So I figure I can get about 2-3GB back by removing XCode.
Can someone tell me the best way to do this?
Thanks.

There is a section in the "About Xcode Tools.pdf" file in your /Developer folder called "Uninstalling XCode 3.0 developer tools". You should have a look at that and choose which (how much) unstallation suits you - there are several different command-lines suggested in that document with different effects.

Out of disk space when copying files from server to server

Servers: NW 5.1.7
Workstation: Windows 98SE with client32 v3.4
There is a batch file that copies files from server A to server B. At certain point, the copying gets stuck and message is displayed on the workstation: ""Network Status. Client32: out of disk space writing file to server B." Unless I press OK, the copying will not continue. There's plenty of space and memory, no quotes or user restrictions on server B. This procedure worked for years without any problem and nothing was altered on the servers or workstation at time of occurrence.

Did you purge the volumes ?
How high is ratio between compressed and noncompressed data on volumes?
I assume, that for this usage (copy one server to another) you should
seek the different way (program), which transfer the compressed data
with untouched state of compression.
Jindrich Kovar
Marty Fox napsal(a):
> Servers: NW 5.1.7
> Workstation: Windows 98SE with client32 v3.4
> There is a batch file that copies files from server A to server B. At certain point, the copying gets stuck and message is displayed on the workstation: ""Network Status. Client32: out of disk space writing file to server B." Unless I press OK, the copying will not continue. There's plenty of space and memory, no quotes or user restrictions on server B. This procedure worked for years without any problem and nothing was altered on the servers or workstation at time of occurrence.

Problem Capturing - Out of Disk Space

Similar Messages

Maybe you are looking for