Problem changing ISE backup schedules

Hi -
I had configured our ISE running v1.2 (patch 5) to run weekly backups for both the Configuration and Operational data via the GUI. This initial setting worked flawlessly. The issue I am seeing is that I now cannot change the frequency of these backups. The GUI allows me to change the settings and reports no errors doing so. The GUI even displays the new schedule (daily in this case), but unfortunately I still end up with it performing the backups only weekly. Has anyone else experienced this and/or have a suggestion what to look for?

Hi - thanks for the reply.
So, do I understand you to mean that you are stuck with the very first backup frequency you set in the GUI and can not ever change it later? That sounds very odd to me.
You say "You can create only one schedule at a time..." - that is ok, but the key was "at a time". I simply want to change what I have now from weekly to daily.
By the way, I can change the backup starting and ending days in the GUI calendar without any problem, but within the timeframe I specify (one month for instance), I still get only weekly backups after I change the frequency to daily.

Similar Messages

ISE version 1.2 patch-5 backup schedules

Hi,
I have ISE version 1.2 patch 5 and I have scheduled a backup every day @3am EST.
Now I would like to delete that backup schedule. I know how to disable the backup but I would like to delete it completely. In other words, I do not want to see it everytime I log into the WebUI Administration --> backup & restore.
Is it possible?

At this time, you can only disable the scheduled backups, you cannot delete them. I know that enhancements to the sceduled backup are scheduled for 1.2.1 and hope that this is one of them.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

Windows Server 2008 backup schedule wizard not showing volumes

Hi folks,
We are running into issues when attempting to configure a Windows Backup schedule through either running the Backup Schedule wizard or through using the wbadmin utility. While I have previously posted this issue on a separate forum (with no luck) I’ve restructured
this description based on the responses received and am also hoping that this a more suitable forum for the problem we are experiencing.
On running the backup wizard the backup configuration screen shows the backup size to be 0KB for the Full Server option or if I choose ‘Custom’ and go to ‘select backup items’ the volume list is empty. However the later ‘select destination disk’ screen of
the wizard lists all of the disks attached to the server along with the associated volume letters (via clicking the ‘Show All Available Disks’ option).
On the backup wizard reaching the summary stage it then proceeds to format the destination disk. On completion of this format the wizard status then changes to ‘Creating backup schedule’ at which point it then fails with the message “The specified number
of volumes is invalid”.
Equally running the following wbadmin command:
wbadmin ENABLE BACKUP -addtarget:{81737a1c-0000-0000-0000-000000000000} -schedule:21:00 -include:c:
Results in the following error:
“ERROR - One of the source volumes specified cannot be included: c: Please specify source as a volume drive letter or access path (if volume is mounted in a folder). Only volumes on locally attached disks can be backed up.”
The server is a Dell PowerEdge R620 running Windows server 2008SP2 and is operating as expected other than for this windows back issue. Everything appears as normal when I view the disks within the Disk Management Console. Backups used to run on this server
fine before it was migrated from old hardware to new hardware using Doubletake Move. Everything else is running fine since the migration apart from Windows backup so not why it would only be effecting Windows backup. I have also ran the wbadmin ‘delete
catalog’ command to remove reference to the previous backups that were taken.
Is there any other tests that I can run to determine why Windows backup is having trouble seeing the available volumes at the 'Select Backup items' stage but not at the Select Destination' stage? Any help or pointers in the right direction would be very
much appreciated.
Thanks,
Niall

Hi Mandy,
Thanks for your advise and apologies for my delayed response. I've was on leave for the past two weeks and my colleague (who had been watching this post in my absence)
was nervous about deleting registry entries (:>)..
I have searched for upper and lower filter values defined under the specified 'Class' registry folder and have found there to be no values specified for either:
"Storage volume shadow copies" at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{533C5B84-EC70-11D2-9505-00C04F79DEAF}
OR "Storage Volumes" at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}
Happy to share the other values stored under these two keys if they would be of use in helping spot the problem?
The only upperFilters value that I found within the Class registry folder that related to storage was:
"Disk drives" at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318} which had a REG_MULTI_SZ upperFilters value of 'PartMgr'.
Do you know if this Disk drives upperFilters value is as expected and if should/can I delete it?
Also is there any other tests that I can run to determine why Windows backup is having trouble seeing the available volumes at the 'Select Backup items' stage but not at the Select Destination' stage?
Thanks,
Niall

Deduplication error: there was a problem retrieving data deduplication schedule

Hi,
After changing dedup schedule once we are receiving this error and not able to change it any more.
there was a problem retrieving data deduplication schedule

Hi,
After changing dedup schedule once we are receiving this error and not able to change it any more.
there was a problem retrieving data deduplication schedule
Take a look @ PowerShell cmdlets for dedupe here:
PowerShell dedupe cmdlets
http://technet.microsoft.com/en-us/library/hh848450.aspx
Of your interest are Remove-DedupeSchedule and New-DedupSchedule ones. Try removing set schedule
you have now, making sure the status is "no jobs" and then create new schedule to see would it make the difference.
Good luck!
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Problem in Generating work schedule manually

hi all,
I m facing problem while generation work schedule manually where i m not getting calender according to PWS.
i m working for chemical industry where every level have different WSR and off
eg: for manager SUN off
General shifts MON off
afternoon shifts WED off
night shifts FRI off
while creating PWS i have assign dws accordingly but while generating work schedule manually its not showing proper off................
i dont know where i m doing mistake
seeking experts help

Parth ,
One afternoon and one night shift is it changing every alternate day or every week
      Mon   tue   wed   thu    fri      sat    sun
Ex: Night After Night After Night After Night
OR
Mon tue wed thu fri sat sun      Mon tue wed thu fri sat sun
Nig Nig Nig Nig Nig Nig Nig    Nig Nig Nig Nig Nig Nig Nig
Check ur sequnce and assign is it week or for day.
Thanks
Swati

Can TM backup schedule be altered?

While hourly backups seem like a good idea they aren't always necessary! I notice that TM made backups during the night last night when both I and the Mac were asleep! If no files were changed then why were backups made?
Seems to me that if there are no changes thee is no need for a backup.
Does anyone know if there is a way to adjust TM settings? Perhaps instead of hourly change it to every 2 or 3 or 4 hours? So much intense disk access seems to me not such a good idea.
Also at what times does TM make it's daily and weekly backups?

1) Hourly backups are occurring in the middle of the night when none need to be made. Your suggestion to stop it while it's occurring is ludicrous.
As the dude stated above. Simply disconnect the external, shut down Mac, turn off TM or if unwanted backup occurs when you are on stop it. What's wrong with that?
2) If there isn't much work being done for a period of time why do the backups occur anyway? I see backups at 1:30 AM, 2:30 AM, 3: 30 AM, etc. Essentially these are all the same. Unless my dogs are surfing for dog ** while I sleep no files were being altered.
You are a little rude and writing "dog **" on AD makes one think you are a silly troll
3) The question is simple and don't tell me to unplug the drive! The questions are...
Does anyone know if there is a way to alter the backup schedule to say every two or three hours?
Or not back up at all when the Mac is sleeping?
Turn off Time Machine or shut down Mac are other ways to go, in addition to the previous helpful advice from your fellow AD users.

Unable to run ISE Backup

Hello All
If I run a backup on ISE it fails with the Message of Insufficient disk space. Actually a dir shows plenty of disk space available.
Any Idea what problem it could be ?
Thanks Thomas
# backup Daily_ISE repository bkp_apzhnise01 encryption-key hash xxxxxxxxxxxxxxxxxxxxx
% Creating backup with timestamped filename: Daily_ISE-130704-1159.tar.gpg
% Error: Insufficient disk space to perform ISE backup
% Application backup error
apzhnise01/admin# dir
Directory of disk:/
   12827561 Jan 16 2013 15:05:35 ise-patchbundle-1.1.2.145-3-70153.i386.tar.gz
      16384 Nov 05 2012 09:23:42 lost+found/
           Usage for disk: filesystem
                  185610240 bytes total used
                14262198272 bytes free
                15234142208 bytes available

Thanks for your reply
We are runnig it on a 3355 Appliance
I found the Problem, the root filesys is on 90% :-(   Don't know what has caused this.
.....So next time doing a show disk instead a dir will help :-)
I guess I have to ask TAC to get the Root utility to gain access and to be able cleanup......
......or is there any other possibility ?
Thanks Thomas
apzhnise01/admin# show disk
disk repository: 2% used (181260 of 14877092)
Internal filesystems:
/ : 90% used ( 460958712 of 540283556)
/tmp : 3% used ( 37504 of 1976268)
/storedconfig : 7% used ( 5694 of 93327)
/boot : 7% used ( 29435 of 489992)
/dev/shm : 0% used ( 0 of 1998968)
warning - / is 90% used (460958712 of 540283556)
apzhnise01/admin# sh ver
Cisco Application Deployment Engine OS Release: 2.0
ADE-OS Build Version: 2.0.4.018
ADE-OS System Architecture: i386
Cisco Identity Services Engine
Version      : 1.1.3.124
Build Date   : Thu Feb 7 07:55:38 2013
Install Date : Mon Mar 11 18:11:36 2013
apzhnise01/admin# show inventory
NAME: "ISE-3355-K9        chassis", DESCR: "ISE-3355-K9        chassis"
PID: ISE-3355-K9       , VID: V01 , SN: KQ8L13G
Total RAM Memory: 3997936 kB
CPU Core Count: 4
CPU 0: Model Info: Intel(R) Xeon(R) CPU           E5504 @ 2.00GHz
CPU 1: Model Info: Intel(R) Xeon(R) CPU           E5504 @ 2.00GHz
CPU 2: Model Info: Intel(R) Xeon(R) CPU           E5504 @ 2.00GHz
CPU 3: Model Info: Intel(R) Xeon(R) CPU           E5504 @ 2.00GHz
Hard Disk Count(*): 1
Disk 0: Device Name: /dev/sda
Disk 0: Capacity: 597.90 GB
Disk 0: Geometry: 255 heads 63 sectors/track 72702 cylinders
33

There was a problem enabling icloud backup (settings crashes)

I have an iPhone 4S with IOS 7.1.2 and i've been able to backup my phone prior to updating to IOS8.
After installing IOS 8 my phone became really slow and unusable and I went back to iTunes and did a full restore.
I've been able to get everything working again except the iCloud backup.
It was enabled after a fresh install but never actually backed anything up:
"there was a problem with icloud backup" and a daily backup is never performed.
The phone is fully charged
Connected to wifi
Whenever I try to backup manually it also fails.
I tried to disable icloud backup and enable it again but that didn't work either as now SETTINGS crashes everytime I enable the icloud backup setting.
any suggestions?

Make sure to change your backup selection in iTunes to icloud...you can't backup your phone to icloud unless iTunes is set to icloud.

Attribute change Run Failed/Scheduled

Hello All,
For a process Chain Attribute Change Run has failed in BW 3.5,and I Repeated the Change Run in Chain only
where Repeat option is ,now the problem is in RSA1 it is now that change run is scheduled
and sm37 it is showing that Canceled.
Now there is Other Process Chain in BI7.0 which picks data from 3.5
Should I repeat the Master data Chain in BW 3.5 followed by in BI 7.0
Or any other way is possible as in BI7 the chain has run successfully..
Thanks,
Kiran

Hi Kiran.......
BI 7.0 and BW 3.5............totally two seperate systems..............here BW 3.5 is just act as a source system of BI 7.0.............if change run fails in BW3.5...............it is not going to effect BI 7.0.............
As ajeet already said............it will effect the SID s in 3.5.............because attribute change run activates the master data...........and SID get generated during the activation of master data.......
Also it will effect the aggregates............because aggregates also get adjusted during change run.......if any of the aggregates contains the master data.........which are getting activated in the change run....
Now u r saying........that in SM37 it is showing that the job got cancelled............So it will not locked the master data..............terminated change runs generally lock the master data............then we hav to repeat the chain run to release the lock.........and u hav already repeated the change run............so no issue........
Hope this helps..........
Regards,
Debjani........

Problem changing default webroot of built in server

I installed CF 8 yesterday, and am running into a problem
changing the webroot. As per the instructions at
http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=webservmgmt_3.html#10239 3,
I have modified the lines in jrun-web.xml as follows:
Old entry:
<virtual-mapping>
<resource-path>/WEB-INF</resource-path>
<system-path>C:/ColdFusion8/wwwroot/WEB-INF</system-path>
</virtual-mapping>
New entry:
<virtual-mapping>
<resource-path>/*</resource-path>
<system-path>C:/ColdFusion8/spayflorida</system-path>
</virtual-mapping>
When I browse to
http://localhost:8500/, I get
"index of" and a listing of the files in the new folder. If I click
on index.cfm, I get the following error:
404
java.io.FileNotFoundException
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:94)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:284)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at
jrun.servlet.http.WebService.invokeRunnable(WebService.java:172)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
The only work around is to shuffle the web files back and
forth as I work on different sites which is quite a pain.
http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=webservmgmt_3.html#10239 3

Hi Oren,
the corresponding parameter is called metadata directory. You can look it up within BEx WAD --> Tools --> Settings --> Metadata Directory (over there just as display parameter).
If you have to customize the directory you are to set the environment variable BEXWAD_METADATADIR in your operational system (Start - Settings - System settings - System - Advanced - environment variable). Just set the new folder according to your needs in the field value.
Usually restarting WAD the next time the new folder is taken, perhaps you have to refresh your metadata (again: BEx WAD --> Tools --> Settings --> Metadata Directory) and restart WAD. The first time WAD starts the files have to be copied to the new directory which can take some time.
If there are problems/questions let us know.
Best Regards,
Marcel

Mass Delete of Schedule Lines generated through changes in prod Schedule

Hi friends,
Kindly provide me the process of mass deleting schedule lines which are created through changes in Production Schedule in the month end.
Regards,
Ask

Hi,
Try T.code Me17
thanks
Rakesh

[Forum FAQ] Cannot perform a backup schedule via Windows Server Backup and receive "The system cannot find the path specified." Error

Symptom One
You attempt to
schedule a backup every day via Windows Server Backup on Windows Server 2008 R2. At the beginning, the backup works without issue. But after a few days it failed and you receive the error “Windows Server Backup:
The system cannot find the path specified.”
Cause
The issue may occur if there is
no shadow copy storage space available on the backup volume.
Verify
You can use the List ShadowStorage command to check if you have enough storage space to store the newly created shadow copy. If you've reviewed the size of the backup snapshot and discovered
that there is no allocated space for the storage association, you need to resize shadowstorage.
Solution
You could run the command below to create shadow copy storage space on the backup volume:
vssadmin resize
shadowstorage /for=<ForVolumeSpec> /on=<OnVolumeSpec> [/maxsize=<MaxSizeSpec>]
More Information
Vssadmin resize shadowstorage
http://technet.microsoft.com/en-us/library/cc788050.aspx
Symptom Two
When you add
another external hard drive to backup schedule via Windows Server Backup on Windows Server 2012, it fails and you receive the error “The System cannot find the path specified.”
Cause
The issue is due to the
Original Destination Disk was not attached to the server.
Verify
You could check the disk status in Disk Management to see if the Original Destination Disk is offline or removed.
Solution
You need to attach
Original Destination Disk to the Server then choose another external hard drive as backup target. After that, you could remove the Original Destination Disk.
Workaround
To work around this issue, please use the WBADMIN command line tool to add disk.
WBADMIN ENABLE BACKUP -addtarget :{ DiskID}
The AddTarget parameter takes disk ID as parameter. It can be retrieved by running "WBADMIN GET DISKS" command.
Example:
WBADMIN ENABLE BACKUP
-addtarget :{ aa123d14-bba0-1dd9-0d93-80aaaa6bbb63}
More Information
Wbadmin enable backup
http://technet.microsoft.com/en-us/library/cc742130.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

good

HT1766 HOW CAN I CHANGE MY BACKUP FOLDER FROM THE C DRIVE TO ANOTHER?????

HOW CAN I CHANGE MY BACKUP FOLDER FROM THE C DRIVE TO ANOTHER????? because my c drive in the windows computer gets filled and i need to back up my ipod to a portable hard disk.. bt i dont know how to do it.. plz help

you can't change the backup folder as far as I know, but you can choose to move backups. The information you need can be found in this article: http://support.apple.com/kb/ht4946
Where iTunes backups are stored on your computer
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.
Hope this helps
Regards,
Stijn

Probleme changing the value of a variable in movieclip from my scene

Hello,
i have a probleme changing the value of a variable in movieclip from my scene. i explain: I have combobox on my scene containing categories, and in the scene i load an xml file containing links to php files that work with the combobox.
Also on the scene i have a movieclip "filmstrip", inside this movieclip on the first frame i have a script loading the php file selected in the scene . i use a load() function with a variable "theUrl" inside like this : T.load(theUrl);.
In my scene i want to change the value of "theUrl" inside the movieClip filmstrip. I tried filmstrip.theUrl = url; But it doesnt work
the xml file
<?xml version="1.0" encoding="ISO-8859-1"?>
<slideshow>
<area title1="10 Last updated" link1="link1.php"/>
<area title1="special" link1="link2.php"/>
</slideshow>
here is the code on my scene:
var link1:Array = new Array();
var LINK:String;
var url:String;
var whoOn:Number;
whoOn=0;
var x:XML = new XML();
x.ignoreWhite = true;
x.onLoad = function(success) {
var photos:Array = this.firstChild.childNodes;
for (i=0; i<photos.length; i++) {
_root.link1.push(photos[i].attributes.link1);
url=link1[whoOn];
filmstrip.theUrl=url;//<<--HERE
x.load("category.xml");
var cbListener:Object = new Object();
cbListener.change = function(event_obj:Object) {
trace(select.selectedItem.label);
if (select.selectedItem.label == "Last updated") {
whoOn=0;
} else if (select.selectedItem.label == "Special") {
whoOn=1;
url=link1[whoOn];
filmstrip.theUrl=url; //<<-----HERE
select.addEventListener("change",cbListener);
here is the code inside the movie clip "filmstrip"
var T:XML = new XML();
T.ignoreWhite = true;
T.onLoad = function(xml) {
etc etc etc }
T.load(theUrl);    //<<---HERE it still undefined

YESSSS . Thanks you very much Kglad it wotk i put all in a function inside the filmstrip function Tload(theUrl){etc ect}and in the root i call it like this filmstrip.Tload(theUrl);   and it works
code in the root var link1:Array = new Array();
var LINK:String;
var url:String;
var whoOn:Number;
whoOn=0;
var x:XML = new XML();
x.ignoreWhite = true;
x.onLoad = function(success) {
var photos:Array = this.firstChild.childNodes;
for (i=0; i<photos.length; i++) {
_root.link1.push(photos[i].attributes.link1);
url=link1[whoOn];
theUrl=url;
filmstrip.Tload(theUrl);//<<--HERE
x.load("category.xml");
var cbListener:Object = new Object();
cbListener.change = function(event_obj:Object) {
trace(select.selectedItem.label);
if (select.selectedItem.label == "Last updated") {
whoOn=0;
} else if (select.selectedItem.label == "Special") {
whoOn=1;
url=link1[whoOn];
theUrl=url;
filmstrip.Tload(theUrl);//<<-----HERE
select.addEventListener("change",cbListener);

Backup Error: "There was a problem completing the backup."

Trying to get my iPad 2 to backup to iCloud and get a message that says "There was a problem completing the backup. Please try again later." Tried signing out of iCloud and then signed back in. Still have the problem. My iPhone backs up to iCloud on the same WiFi network without a problem.

1 ipod touch has this error. Another one will backup but shows the date as unknown. An iPad works fine. I can't believe it is a server error. I can run the iPad backup at the same time as the others and it works. Also I restored the touches to factory and the backups still failed. Swapped AppleID's and the errors followed the Id's. I wish there was a way to validate that the backups were good on the web side. In the manage storage on the one that fails completely, it show there is a backup with a size and allows you to turn off the apps that are backed up but I know it has never completed successfully. Even iTunes updates the date of the backup in the summary panel even though it has failed. This feedback in iTunes Summary and the Manage panel on the device could give a false sense of security. This needs some fixing from Apple. At least iTunes backups are working as I have restored aa few times now under iOS 5/iTunes 10.5.

Problem changing ISE backup schedules

Similar Messages

Maybe you are looking for