Problem changing UWL Workitem check

Hi,
I am working with ESS/MSS package .
I want to change the workitem text for WS12300111. When the approver rejects the leave request, it comes into the employee's inbox as "process leave request by employee".This workitem text is very vague.
So i wanted to change the workitem text to "Leave request Rejected by Manager".I changed it accordingly in the WS12300111 Task TS12300116 workitem text "Leave request rejected by manager". The change is reflecting in the backend.
Unfortunately, when the leave is being rejected by the approver and coming to the UWL inbox , it is still showing "process Leave request by employee".
Can anyone tell me what to do to vhnage the test in the portal too.
regards,
pinki

Hi Pinki,
Have you got this issue resolved ?
I am also facing the same problem !! :-s
I have copies the standard workflow WS12300111 and changed all the Agent Assignments to General Tasks.
In the Task TS0000121 ( Where Employee get the Re Submission Request), Agent Assignment is not happening when the Manager Rejects the Leave. How can I solve this problem ?
Anyone knows the solution .. Kindly Help !!

Similar Messages

UWL workitems become non clickabl/executable

Hi,
We have a huge problem with UWL workitems that become non-clickable/executable overnight.
This problem only applies to the Workitems that use the Webflow principles (BIT603, so using xHandlerLauncher in UWL config file)
In the portal logging, we sometimes see the following errors/warnings when this problem occurs:
warning 2009-05-20 12:48:28:840 com.sap.netweaver.bc.uwl.UWLException: Wed May 20 12:48:28 CEST 2009
(Connector) Invalid argument or value or null used
/uwl/ui com.sap.netweaver.bc.uwl.ui.creators.TableColumnCreator sap.com/tcwddispwda euax419-zep Server 1 2_33229
Full Message Text
com.sap.netweaver.bc.uwl.UWLException: Wed May 20 12:48:28 CEST 2009
(Connector) Invalid argument or value or null used
warning 2009-05-20 12:48:28:840 No logical system id available for backend system <EUP-300>
/uwl/service/connector/webflow com.sap.netweaver.bc.uwl.core.connect.webflow.XHandlerLauncher.getUrl() sap.com/tcwddispwda euax419-zep Server 1 2_33229
Full Message Text
No logical system id available for backend system <EUP-300>
So it seems that the link is not shown due to the fact that a logical system could not be found for the given UWL system.
Moreover, sometimes we have people logging on to the portal where the task is executable and for others not. This might be caused by 2 virtual systems we have in our landscape where the connectivity/logical system is correctly defined or buffered for 1 virtual server but on the other it is not!
Can someone please help us with this
Many thanks
Pascal Decock

Hi Pascal Decock,
try this,
goto tcode>SBWP>settings>workflowsettings>Refresh organizational environment. hope it works.
Regards
Bhaskar

UWL workitems become non clickable/executable

Hi,
We have a huge problem with UWL workitems that become non-clickable/executable overnight.
This problem only applies to the Workitems that use the Webflow principles (BIT603, so using xHandlerLauncher in UWL config file)
In the portal logging, we sometimes see the following errors/warnings when this problem occurs:
warning 2009-05-20 12:48:28:840 com.sap.netweaver.bc.uwl.UWLException: Wed May 20 12:48:28 CEST 2009
(Connector) Invalid argument or value or null used
/uwl/ui com.sap.netweaver.bc.uwl.ui.creators.TableColumnCreator sap.com/tcwddispwda euax419-zep Server 1 2_33229
Full Message Text
com.sap.netweaver.bc.uwl.UWLException: Wed May 20 12:48:28 CEST 2009
(Connector) Invalid argument or value or null used
warning 2009-05-20 12:48:28:840 No logical system id available for backend system <EUP-300>
/uwl/service/connector/webflow com.sap.netweaver.bc.uwl.core.connect.webflow.XHandlerLauncher.getUrl() sap.com/tcwddispwda euax419-zep Server 1 2_33229
Full Message Text
No logical system id available for backend system <EUP-300>
So it seems that the link is not shown due to the fact that a logical system could not be found for the given UWL system.
Moreover, sometimes we have people logging on to the portal where the task is executable and for others not. This might be caused by 2 virtual systems we have in our landscape where the connectivity/logical system is correctly defined or buffered for 1 virtual server but on the other it is not!
Can someone please help us with this
Many thanks
Pascal Decock

Hi,
Were you able to find the cause for this?
Regards,
MK

TS20000189 Change trip - uwl workitem execution

Hi there!
The standard workflow task TS20000189 Change Trip is used both for changing expenses AND for changing travel requests. In the standard configuration, when clicking a UWL workitem a transaction iView is opened. I want to configure this to open up a WebDynpro interface instead since that's what the users are used to.
However, the problem is - how to I make the task TS20000189 access the two different applications (sap.com/esstratre/Expenses or sap.com/esstratre/Request in WS20000040 and WS20000050 respectively) or alternatively - the two different portal pages? I can make it access the Expenses application through the xml file, but then the Request application wont open...
Please help!
Brgds, Caroline

Hi,
Have you found any solution for this?

Problem in retriving workitem id from uwl in abap webdynpro

Hello,
Curently, I've a problem similar with this post : Problem in retriving workitem id from uwl in abap webdynpro
But unfortunatelly there is no answer :/
I've followed this tutorial : http://wiki.sdn.sap.com/wiki/display/WDABAP/IntegratingWebDynproABAPapplicationswithUWLforworkflowin+Portal
And I have a problem in my WD Abap. The WI_ID field is empty (initial).
Here is my XML :
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd'
>
<UWLConfiguration version="1.0">
     <ItemTypes>
          <ItemType name="uwl.task.webflow.TS90000087.ED1CLNT100" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
            <ItemTypeCriteria systemId="ED1CLNT100" externalType="TS90000087" connector="WebFlowConnector"/>
            <Actions>
               <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproABAPLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
                 <Properties>
                    <Property name="WebDynproApplication" value="zps_pnpi"/>
                    <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
                    <Property name="DynamicParameter" value="WI_ID1=${item.externalId}"/>
                    <Property name="openInNewWindow" value="yes"/>
                    <Property name="WebDynproNamespace" value="sap"/>
                    <Property name="System" value="ED1CLNT100"/>
                    <Property name="display_order_priority" value="5"/>
                 </Properties>
                 <Descriptions default=""/>
               </Action>
            </Actions>
          </ItemType>
     </ItemTypes>
</UWLConfiguration>
Here are the parameter defined in my application :
WI_ID     000000000000     SWW_WIID
WI_ID1     ${item.externalId}     STRING
And, i've made the test with both the WI_ID and the WI_ID1 in the XML but everytime, no value at all.
Could you please help me ? It's been three days I'm looking for a solution to get my Workitem ID in my Webdynpro ...

In fact, it's quite strange, I added the menu and toolbar display and I can see that my url contains the data ...
http://<begin_of_the_url>DynamicParameter=System%3DED1CLNT100%26wi_id%3D000000629442%26WI_ID%3D000000629442%26WI_ID1%3D000000629442<end_of_the_url>
So ... how is it possible ?
And the next question, how can I get the full url so I can parse it myself ?

In iTunes I'm having problems changing the "Media Kind" with a number of playlists in the OPTIONS menu from "music" to "audiobook". After going through the steps, the next time I check the items have reverted back to "music". What step am I missing?

In iTunes I'm having problems changing the "Media Kind" in the OPTIONS menu from "Music" to "Audiobook". After going through the steps, the next time I check, the items have reverted back to "Music". What must I do to save it as an "Audiobook"?

After more digging in the Support section here and some Google work, I turned off iTunes Match and lo and behold! I can change the media kind to Audiobook! So, it looks like iTunes Match locked the files up somehow and for some reason.
I went into iTunes Store > iTunes Match > "No, Thanks" to disable it on the local PC.

Problem in UWL

Hi,
We have deployed ESS/MSS 1.0 business Package on EP 7.0. sp13
I am encountering problem in UWL. Whenever i click on any task in UWL, it displays following error :- Services is not started.
We had then change setting for sysstem >>WAS properties
in that if we give epserver :50000 .
then the leave request task is working .ie on click of the task open the task in the new window.
But then the ABAP WEBDYNPRO iview will stop working .(ie service cannot be find)
So it not possible to use both the things at a same time .
Since we are using only one system for the UWL and connecting to ESS and MSS in R/3
Usally in WAS properties we have to give R/3 server : 80XX
will be the port know .
regards,
Jigar Oza

hi,
What are the services needed to be activated. can you pls explain me the procedure to be carried out in SICF....so that i could check whether if i have missed some steps.
Regards,
Jigar

Changing UWL Subject when task from GP

Hi experts.
I'm facing the problem when UWL column "Subject" displays the name of the current callabe object(CO) of workflow. Because the nature of my workflow is "very dynamic", the meaning of CO may change, and I want UWL to display my custom dynamic description in column "Subject". How can it be done???? I can't find corresponding functions in GP java api...
Alternatively, is it possible to make GP UWL connector to pass process description to Subject column, instead of current CO name??
Thanks in advance.

Hi,
Go to the action. At bottom you can view tab called "Task".
Check the "Customize Task Title". Mention the name that you want to appear in UWL.
Regards,
Niraj

UWL Workitem attachments

Hi,
When we click the attachments in UWL workitem for leave or travel, the link opens in a SAP GUI for HTML screen. Can we change this to display in a webdynpro screen? Can you please provide any link to documentation in this regard.
Thanks,
Anand

unfortunately this cannot be changed it will open only SAPGUI.

Changing Mail.app Check New Messages Frequency to Every 2 mins?

I'm running Lion 10.7.3 with Mail.app 5.2.
In Mail > Preferences > General
There's a setting to change "Check for New Messages" with a pulldown for every 1 minute, every 5 mins, etc.
Is there a way, possibly via terminal settings, to change this to check for new messages every two minutes?
The reason for this is that I currently have my mail.app set to check email every minute for all my accounts. It mostly works, however, occasionally this is too many requests for my mail server and I get the dreaded pop-up requesting the password for the account. When this happens, all mail checking is stopped until I confirm the password (which is already correct) or cancel the request. It's a pain because I'm not always at my computer to instantly confirm this and then it can go hours without checking mail. Thus, checking mail every two minutes might work perfectly. Every 5 minutes seems a bit too long.
Any help is appreciated, thanks.

Mike Mcgee wrote:
It mostly works, however, occasionally this is too many requests for my mail server and I get the dreaded pop-up requesting the password for the account. When this happens, all mail checking is stopped until I confirm the password (which is already correct) or cancel the request. It's a pain because I'm not always at my computer to instantly confirm this and then it can go hours without checking mail. Thus, checking mail every two minutes might work perfectly. Every 5 minutes seems a bit too long.
Actually Mike underestimates the annoyance -- Mail quite easily gets itself into a snit where it keeps asking for the password over and over, and the only way to get it out of the loop is to quit Mail and relaunch it. For those of us with 9 mailboxes, and we've got it set so that mail does not remember passwords, this is annoying! (Why do I have 9 mailboxes and don't save any passwords? Because I used to have 10 mailboxes opened, and relied on the saved passwords, and then one time they got wiped out and I realized that I had clean forgotten one of them. I made the decision to always put passwords in manually so that I will not forget them. When you get to be old and senile you will use these tricks, too.)
But, anyway, Mike's original problem is that a 1-minute check time breaks mail and he is annoyed by this. If he goes through all the hoops to hack it to 2 minutes, he might just find himself in exactly the same place and need to set it back to 5 anyway. Nathan, I'm glad you work somewhere that management is willing to spend cash updating mail servers so that your spam gets instantly delivered, but my management wants to spend money on other things.

Reg : UWL Workitem URL

Hi All,
I have an issue - when I execute the workitem from UWL ( which is leave request approval workitem ) it generates the following url.
http://<FQDN of Host Name >:50000/irj/servlet/prt/portal/prteventname/Navigate/prtroot/pcd!3aportal_content!2fevery_user!2fgeneral!2fdefaultDesktop!2fframeworkPages!2fframeworkpage!2fcom.sap.portal.innerpage!2fcom.sap.portal.contentarea?NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fevery_user%2Fgeneral%2Fuwl%2Fcom.sap.netweaver.bc.uwl.uwlSapWebDynproLaunch&System=SAP_ECC_HumanResources&WebDynproDeployableObject=sap.com%2Fess%7Elea&WebDynproApplication=LeaveRequestApprover&DynamicParameter=wi_id%3F000000900710&CurrentWindowId=WID8123090089916&NavMode=1
This url takes me to the portal logon page and asks for login id & password and infact never logs me in.
But when the SAP_ECC_HumanResources is replaced by SAP_LocalSystem it works fine...
So my question is where does the UWL fetch the system - SAP_ECC_HumanResources .....
Note : In SWFVISU i have already changed it to SAP_LocalSystem but still the URL picks up SAP_ECC_HumanResources....
Best Regards,
Roby...

Hi All,
Please help me in this regards - the UWL workitem is giving System = SAP_ECC_HumanResources in the below URL where as it should have System = SAP_LocalSystem .
http://<FQDN of the Host>:50300/irj/servlet/prt/portal/prteventname/Navigate/prtroot/3aportal_content!2fevery_user!2fgeneral!2fdefaultDesktop!Jcom.dgpoghunet.ssdpnego.2fframeworkpage!2fcom.sap.portal.innerpage!2fcom.sap.portal.contentarea?NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fevery_user%2Fgeneral%2Fuwl%2Fcom.sap.netweaver.bc.uwl.uwlSapWebDynproLaunch&System= SAP_ECC_HumanResources &WebDynproDeployableObject=sap.com%2Fess%7Elea&WebDynproApplication=LeaveRequestApprover&DynamicParameter=wi_id%3Z000000000039&CurrentWindowId=WID1884090613866&NavMode=1
So my question is - Where is that do I have to mention this so that it picks SAP_LocalSystem in the workitem URL? ...
Thanks in Advance,
Roby ...

UWL workitems not deleted

Hi,
not dealt with UWL workitems before.
Client has a PR WF in the system and workitems go to UWL for Approvals.
Instead of releasing the PR from UWL, the user has released it from ME54N.
So now, though the PR is released, it still shows workitems in UWL.
My question is are there any settings (in SAP, Portal) which could handle this, so that whenever user releases a PR thru ME54N, the workitem in UWL gets deleted.
Other question, now since the workitems (for which PR was released from ME54N) are there in UWL, what happens if the user again db-clicks the workitem, will it throw an error?
Last question, what can I do to remove those workitems for which PR was released from ME54N. How can I delete them.
Thanks,
Aditya

Hi Aditya,
As Workitem behaviour is dependent on Status, set the Workitem status to complete using any one of the following FM
   SAP_WAPI_SET_WORKITEM_COMPLETD
   SAP_WAPI_WORKITEM_COMPLETE
   SWU_COMPLETE_R3F_WORKITEM
I dont know the exact one... so kindly check the Documentation of them and choose the best.
As far as i know second one would set the status to complete
Hope this would Solve your issue.
Regards
N.N.

I no longer have sound when playing my clips through adobe premiere elements 12. How to I correct this problem? I have checked all audio levels and there is no mute on etc. I have updated to 12.1. Still no sound.

I no longer have sound when playing my clips through adobe premiere elements 12. How to I correct this problem? I have checked all audio levels and there is no mute on etc. I updated to 12.1, but still no sound in any clips. Even not on old files which used to work.

bfun
What computer operating system is your Premiere Elements 12/12.1 running on? Can we assume that this audio plays back OK
on the same computer when you are using a computer player independent of Premiere Elements?
What are the properties of these clips that worked before but do not know with regard to sound
For now, I will assume that you are working on Windows 7, 8, or 8.1 64 bit.
Have you checked the Edit Menu/Preferences/Audio Hardware ASIO settings? Do you have any 3rd party audio devices incorporated in your computer environment?
Please delete the Adobe Premiere Elements Prefs file and, if that does not work, then the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. The Windows 7, 8, or 8.1 64 bit path is
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and, in the 12.0 Folder, is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. Make sure that you are working with Folder Option "Show Hidden Files, Folders, and Drives" active so that you can see the complete path cited.
Do you have installation files or installation disc with the purchased serial number in case we need to resort to uninstall/reinstall?
We will be watching for your follow up.
ATR

Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out

Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out

Have a look at this it might help
http://support.apple.com/kb/TS4148

I can't change the spell check to UK English

On a Mac with an existing CS6 InDesign document, I have tried everything to change the spell check to use a UK language, e.g., I want "programme", not "program".
1. Before I open the document, I have selected InDesign/Preferences/Dictionary and changed to English: UK language.
2. Once the document is opened:
- I have changed all the paragraph styles (Advanced Character Formats) to English: UK language;
- I have no Character Styles so nothing to change there;
- I have gone to Edit/Spelling/User Dictionary and changed language to English: UK.
When I open Edit/Spelling/Check Spelling, the language is set to English: UK. But when I start to spell check, it doesn't pick up any of the words that I know need changing for UK English (i.e., programme, not program)!
Help! What else can I do?

The Australian dictionary is just the British Dictionary renamed, it doesn't recognise any Aussie words that aren't included in the British version.
Don't know why Apple even bothered except to pat us on the head and pretend they cared.
Languages btw are applied like any other style like bold or color or font. You select the text you want to be something and apply the Language.
Peter

Problem changing UWL Workitem check

Similar Messages

Maybe you are looking for