Problem - Channel Mapping in Audition 5.5 CS

I am trying to find a way to map more than one input channel at a time using Adobe Audition 5.5 CS on a Mac Pro Quad Core system connected to a PreSonus Studio Live 16.0.2. When going into the channel mapping options it only allows for mapping one input for one channel at a time, if wanting to use another input, it has to remapped each time before recording. As it is, I can only record with only one mic or from only one audio feed at a time, which makes it impossible to record a multiperson show at the same time. On the other hand, the option to map output channels has 16 available. Seems completely backwards, would be better to multiple input mapping, and a single output channel to hear the mix.... Please help..

In an attempt for clarity, it the screen shot above, In the top box there are only two input selections 1[L] (Mono) and 2[R] File Channels, each one has the option of the 16 PreSonus FireStudio Device Channels from the drop down menu as illustrated here, when clicking on the little triangles or arrows on the right. If you notice that in the box below the Input box is the Output, It offers a multitude of of File Channels that allow you to assign all of the output channels at once and are able to use them simultaneously. As you can see I have 1 and 2 assigned to 15 and 16 sliders channels on the mixer and then on 3 and 4 to slider 3 & 4 on the mixer and so on.... This is what is not available in the input section because there are only two File Channels available to assign at one time limiting record on a single stereo mic or audio feed... I'm not sure how else to explain my problem. I would like to be able to use more than one slider on the mixer to record from at the same time.. in this situation it can only record from one slider input at one time...Thanks for all of your patience and input, I appreciate all of your reply's and have checked them all. But still have this problem...

Similar Messages

Exported file sounds different inside Audition CS6 - audio channel mapping problem?

Hi guys. I've been working on some voice reels today, and for some reason my finished and exported files sound different to how they sound in Audition - basically, the music tracks increase in volume whenever the voice actor isn't speaking. As mentioned, this isn't happening in the Multitrack session, just when playing back the exported track in a third-party app, and has only been happening today. I've tried messing around with the Audio Channel Mapping and Audio Hardware settings in the Preferences, without any joy. I'm suspecting something's got messed up on the sound card, but just wanted to check that I haven't missed something painfully obvious inside of Audition!
Specs:
Windows 7 Home Premium, SP1, 64-bit
AMD Phenom II X64 2.8 GHz, 8GB RAM
Adobe Creative Suite 6 Production Premium
M-Audio Delta Audiophile 2496
NVIDIA GeForce GTX650Ti 2GB

Can't answer that without quite a bit more information about the third-party apps, what exactly you're exporting, workflow, etc. It won't be a mapping issue though - that will only affect the output of Audition to a hardware device.
But if you are exporting a single file with everything on, and it plays okay in Windows Media Player, for instance, then whatever is happening isn't with Audition, but whatever you are putting it back into. It sounds as though some sort of auto-leveling system is at work - and Audition wouldn't do that unless set up very specifically to do so.

Output channel mapping problem for surround encoder

vista 64 bit
sound blaster titanium x-fi sound card
logitech 5.1 speaker set up
hello, i am trying to mix a movie i made into 5.1. when i open the surround encoder, go to the audio hardware setup and try to set my output channel mapping i only get two speakers. i have a card that supports 5.1, 5.1 speakers, and get surround sound when i play a DVD. yet audition only recognizes my left and right speaker. any help on how i get my output channel mapping set correctly?
thanks in advance!

Thank you for the info, though I admit I'm still a bit confused.
My card is a creative x-fi extreme gamer. It has 3 line out jacks and one line in jack. T Oh, here it is in the manual...thats just not good enough.
But what is the surround encoder dialog box doing, if not encoding surround mixes? The manual says I can exportsurround sound from a multitrack session.
Date: Mon, 1 Jun 2009 21:58:08 -0600
From: [email protected]
To: [email protected]
Subject: output channel mapping problem for surround encoder

Audio Channel Mapping problems

Hi Everyone,
I can't seem to find a solution to my problem.
I use Audition in two situations.
Firstly, with the internal soundcard (Mac Book Pro) when I'm out and secondly, when I'm at home with my focusrite scarlett.
When I'm out, Audition won't play as it can't find the focusrite.
Question: How do I use Audition in both situations?
My work around is to start up Audition with the shift key when I don't have the focusrite with me.
Any solutions that anyone can suggest?
With Logic, it just shows up a message saying my Focusrite isn't available.
Many thanks!

Thanks, ryclark for your reply!
When I'm not using the Focusrite:
The "Device Class" only shows "CoreAudio."
"Default Output" only shows "Built-in Output."
On the "Audio Channel Mapping" page, it has
"Output":Device: Scarlett 2i2 USB" and
on "File Channels": "1[L] Unknown-Device query failed."
So, it's remembering the Focusrite Scarlett, but then can't find it, so stops.
Weird!
Surely there's a workaround?
Thanks!

Problem in mapping remoteobject on server side

Hello all
I am trying to use remoteobjects in Flex and PHP via Zend_AMF. I am having problem in mapping the data object in flex with the one in PHP.
Here's my code....
private function getAuthors(event:Event):void
     serviceRO = new RemoteObject();
     serviceRO.endpoint = "http://localhost/sampleproj/public/";
     serviceRO.destination = "zend";
     serviceRO.source = "MyService";
     serviceRO.addEventListener(FaultEvent.FAULT, faultListener);
     serviceRO.getData.addEventListener(ResultEvent.RESULT, resultListener);
Now, here's the server side directory structure that works for me....
webroot
+ sampleproj
++ public
+++ index.php (index file for the webapp)
+++ MyService.php (this is the service class)
+++ VOAuthor.php (this is the Value Object class)
Since the index file, and the service file and value object are all in same directory, it works.
This is what DOESN'T work....
webroot
+ sampleproj
++ services
+++ MyService.php (this is the service class)
++ vos
+++ VOAuthor.php (this is the Value Object class)
++ public
+++ index.php (index file for the webapp)
The error that I get is:
Channel.Connect.Failed error
Here's little of something that's going on in index.php
<?php
require_once ('C:/webtools/zendframework/zf/library/Zend/Amf/Server.php');
require_once ( realpath(dirname(__FILE__) . '/../services/MyService.php') );
$server = new Zend_Amf_Server();
$server->setClass("MyService"); // adding the class to AMF server
$server->setClassMap("VOAuthor", "VOAuthor"); // mapping the ActionScript VO to PHP VO
echo($server->handle());
?>
My guess is that in ActionScript code I have to do something with RemoteObject's endpoint.
Can anybody please help me out with this?
Thanks and Regards
ShiVik

The problem turned out to be in the php code.
Here's how I changed it
<?php
require_once ('C:/webtools/zendframework/zf/library/Zend/Amf/Server.php');
$server = new Zend_Amf_Server();
// the following methods provide the lazy loading of services and value objects
$server->addDirectory( realpath(dirname(__FILE__) . "/../services/") );
$server->addDirectory( realpath(dirname(__FILE__) . "/../vos/") );
echo($server->handle());
?>
Earlier I wasn't taking into account the change of directories for service and value object files.
Thanks and Regards
ShiVik

Dynamic Tempo Mapping In Audition CC

Hello Adobe,
I've seen various forum postings about this in the past, but nothing very recently. I just downloaded the latest version of Audition CC. It looks great, a lot of cool new features, but I wanted to reiterate on past postings that dynamic tempo mapping functionality would be extremely useful. It doesn't need to be anything too fancy. Just need to be able to tell Audition that after 30 bars of 4/4 at 120 bpm, I'd like the metronome and bars/beats display to change to 3/4 at 130 bpm etc.
Just want to bump this back onto your radar. Thanks.
-Brendan

I've used the Ozone with Audition in the past (we're talking about the keyboard/audio combo device, right?) and it's been fine. If you're seeing the playhead move and the level meters update when attempting to play through it, that means the communication should be there.
Any chance you can show us screenshots of the "Audio Hardware" and "Audio Channel Mapping" panels in the preferences dialog? That might help get started.

Device query in Channel Mapping failed - no playback

Hello Forum!
I'm struggling to figure out why playback won't work in Audition. A dialogue box pops up at opening that says that "Audio Hardware preferences have changed". I check them and the default input and output are still set as Built-in Input and Output (which I usually use). However, under Audio Channel Mapping settings, Device Channels are "Unknown - device query failed". How do I get the device query to not fail?
Oh and playback works fine in all other programs and I'm running it on a Mac OS 10.10.2.
Thanks!

Sometimes if Audition loses contact with the requested audio device for some reason it may have difficulty reconnecting. You may need to kick start it to re-find the audio drivers by changing the Audio Hardware preferences in Audition. Close Audition, re-open and set audio hardware back to your norm. Even changing the Master Clock setting might get it going again.

Problem with maps on e72

Hi everyone
I've got a problem with maps on my E72.
I've seen advert that Nokia is going to let everyone use maps for free on selected models.
I was going to buy Sat Nav for whole Europe as I travel a lot and I was going to change my old N95. I thought I could do both in one new phone. Checked all the available models and chose E72. It said it;s got GPS and you don't need to use your network and spend fortune on internet connection. Got it from eBay for £270.
I installed Ovi Maps from internet and the first thing that surprised me was it had 'only' 7-8MB.
I thought that something was wrong, maps for 72 countries couldn't be 8MB big.
After some time I managed to set my e72 up. Put my Maps on and...
It takes loads of time to find GPS connection, but the worst thing is if I type lets say Paris it doesn't find anything. Map has wholes, like suddenly the roads end and there's nothing there.
My question is what am I doing wrong? Do I need to download something more? I didn't have any maps on my phone when I bought it. Where can I find them?
If someone could help I'd appreciate it.
Thanks a lot.

I forgot to mention that when I choose a destination it keeps saying Calculating route all the time. I waited about 15 minutesand it didn't calculate anything.

Problem with maps in Mavericks on iMac

I have a problem with my Maps on Mavericks.
I can open it just fine, no crash or whatever but the map itself just won't load, whatever mode it is on. Here is the screenshot of my Maps:
As you can see, it just stays blank all the time.
I'm also running Parallels 9 and don't know if that has something to do with problem.

Spent days trying various fixes, but this is the one that did it for me. Thanks!
livetowin
Re: Problem with maps in Mavericks on iMac
Dec 8, 2013 7:14 PM (in response to robin1943)
Try this
Since my date and time were incorrect and imessage was not working as well, I tried this
1. Go to system preferences and click date and time
2. Select date and time tab
3. Uncheck "set date and time automatically" and manually enter the correct time
4. Go to time zone tab and uncheck the box there too
5. Go back to date and time tab and now check the box "set date and time automatically"
6. Then check the box in time zone as well
Now open maps and see if it works!

Problem in mapping while using Do not Use SOAP Envelope

Hi All,
This is wrt my thread 'Removing and adding SOAP Envelope'
I am currently working on SOAP-XI-Proxy Scenario.
For some un avoiadable reason, I had to use the option 'DO not use SOAP Envelope' .So the SOAP Envelope came withen the payload and in the pipeline, I can see the payload prefixed by '<?xml version="1.0" ?>' .
Now my payload looks like
<?xml version="1.0" ?> ( no more the encoding="utf-8" notation is there)
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
   xmlns:xsd="http://www.w3.org/2001/XMLSchema"    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<Complaint_Request xmlns="urn:******createserviceticket">
<CaseNo>12345</CaseNo>
<CustomerNo>12345</CustomerNo>
</Complaint_Request>
</soapenv:Body>
</soapenv:Envelope>
To accomodate the change, I also changed my request structure as
<Complaint_Request> (My new message Type)
    <Envelope>
     <Body>
       <Complaint_Request> (My previous message Type)
        <caseNo>
        <CustomerNo>
But I am facing problem in mapping the values to the target structure (which is a flat structure),
as the payload doesnot start with ' ns1: ' notation any more . Even XSLT mapping is not working.
When I am pasting the payload in the Testing Mapping Editor, the Source Node are correctly
formed, but all come in RED . But as the root node , ie 'ns0' is not there, the value
from child nodes are not getting mapped to the target fields.
Regards,
Subhendu

Hi Joel,
SAP says, when we use the option 'DO Not Use SOAP Envelope', the payload also contains the SOAP
Envelope. So it is obvious that the payload wont start with 'ns0' notation.
So I am searching for a solution, when we use that option.
Regards,
Subhendu

Problem with Inventory stock audit Report in other currency

Hi I have a problem with Inventory stock audit, the SBO show me the report in local currency, and I have to obtain that report in other currency, I was working with OINM table, but I don't know how obtain the report

Alberto,
Other currency information is available at the document row level and in the Journal Entries.
What you could do is join the OINM with the associated document and let the foriegn currency value.
OINM.TransType = ObjType (marketing document)
OINM.BASE_REF .......Document Ref
OINM.DocLineNum ......LineNum
Suda

Problem in mapping with multiple values

Hi all,
I am facing a problem during mapping. I am explainning the problem with a example.
Suppose i have a source table named Employee which has two columns emp no and account no. I have a target table Emp_account which has also the same columns.
One employee may have more than one accounts. In source table this account nos are stored in account no column in one row corresponding to emp no. The multiple values in account no are separated by comma for one record in source table.
But in the target table Emp_account a single record will be inserted for each employee's separate account. There should not be multiple values separated by comma in account no column of target table.
So if any employee has two accounts this will be stored as one row in source table but in target table it will divided into two different rows for each account.
EMPLOYEE(Source)
emp no account no
10 101, 102
EMP_ACCOUNT(Target)
emp no account no
10 101
10 102
Think I explained the requirement.. How can i made this in OWB mapping editor..Is it possible?...Can any operator perform this task...If any of u know about this plzz give some solution..It's very important ..
Thanks & Regards,
Sumanta Das

Hi,
With reference to your question.
Can any operator perform this task..I don't think any single operator will help you.
I suggest using an intermediate (staging) table by using a PL SQL procedure with output port to store the values of account number provided the number of accounts are limited. Else use an array variable for account of an employee.
In short no simple solution because of the bad source design else the pivot/unpivot operator would have helped you.
Cheers
- Mohammed

Problem in mapping after migration from 3.x to 7.x infosource

HI Experts,
I have a problem while mapping the data source 2lis_03_bf to info cube 0ic_cs01.
we have a flow like this now after migration done.
Datasource->transfer rules->infosource->transformation->info cube
Now we dont require infosource and its respetive transformation, we are going to map directly from data source to info cube.but we have routines available in info cube related transformation.i.e. coming from infosource to info cube .
I would like to create a new transformation directly from Datasource to info cube but all the source fields are not available in target cube. How to map them.do i have to map all the target fields or i have to map according to the transfer rules target fields. what is the funda to make a transformation and mapping the source and target fields.
Could anyone please through some light here..
Thanks much in advance.

sunil kumar wrote:
Hi,
>
> As said above convert transfer rules to transformations (right click on transfer rules -> additional prop -> create transformation)
>
> Then right click on datasource -> Migrate
>
> After doing this, your datasource will be linked to Infocube directly with one transformations automatically.
>
> Regards,
> Sunil
Hi Sunil & Sravan,
THanks for ur quick reply.As you said click on transfer rules and create transformation.As i can see in my system i have a transformation from data source to infosource .i.e. starting with RSDS_ and then another transformation from info source to info cube.i.e. starting with TRCS_ . what i did was created a transformation by right click on info cube and by giving data source name as 2LIS_03_BF .this is a manual transformation i am mapping manually.Is this a correct way? Please tell me how to do it.
as i have to do this immediately.
Thanks in advance

Problem in mapping a many to many relation to a list

Hi,
I have a problem with mapping a many to many relation to a list.
I have a Many to Many relation in my database between tables baskets and products. This relation is implemented with a join table basket_products, which has two fields which correspond to the foreign keys to tables baskets and products. The join table need to have another one column "order", which defines the order of the products for the specific basket.
In my mapping I have:
@Entity
@Table(name = "baskets", uniqueConstraints = {})
public class Components implements java.io.Serializable {
@ManyToMany(cascade = { CascadeType.ALL }, fetch = FetchType.LAZY)
     @JoinTable( name="baskets_products",
                         joinColumns=@JoinColumn(name="b_id", referencedColumnName="pr_id"),
                         inverseJoinColumns=@JoinColumn(name="pr_id", referencedColumnName="pr_id"))
        //This of course doesn't work!!
       //@OrderBy(value="order")
     public List<Products> getProductses() {
          return this.productses;
     public void setProductses(
               List<Products> productses) {
          this.productses = productses;
@Entity
@Table(name = "products", uniqueConstraints = { })
public class Products implements java.io.Serializable {
@ManyToMany(cascade = { CascadeType.ALL }, fetch = FetchType.LAZY, mappedBy = "productses")
     public Set<Baskets> getBasketses() {
          return this.basketses;
     public void setBasketses(Set<Basket> basketses) {
          this.basketses = basketses;
     }In the EJB spec I read that :
"The property or field name must correspond to that of a persistent property or field of the associated
class."
What to do if I want to use a field from the join table to do the ordering of the list??
My problem is that the field "order", is not defined to the EJB container as a persistent field, so it cannot be used. But for my needs it is necessary that this field is included in the join table.
I thought that I could use the secondary table annotation to map the join table to the Baskets class, as well, so that I can define the order field, but this solution seems to me as a really wrong one.
Can anyone help me??
Thanks,
Elenh.

Hi Martin-
Can you please help me. Here are the details:
We have created an AQ in Oracle DB which will have the following message Structure:
CREATE OR REPLACE TYPE enqueue_payload AS OBJECT
( field1 VARCHAR2(100),
field2 VARCHAR2(100),
field3 DATE,
field4 VARCHAR2(100),
field5 NUMBER,
payload CLOB,
In the Payload field we are enqueing an XML message.
We have to use a OSB proxy service to dequeue the message from the AQ, transform it to another format and send to a SOA Composite.
We created a AQ Adapter in Jdeveloper 11g and imported the WSDL, XSD and .jca jca binding file into the OSB project. And configured the OSB proxy service using the WSDL imported.
However in OSB proxy service message flow when I try to create an XQUERY transformation, I see that the Payload field does not expose the structure of the XML message that is being enqueued. I even changed the message structure definition to have the payload field as XMLType. But it didn't help.
On analyzing the XSD created by AQ Adapter, I see that the payload is being defined as "string" in the XSD.
Inputs Needed
=========
1. How can we parse the payload field defined as CLOB/XMLType in OSB so that I can see the structure of the XML message it holds ?
2. Is there any in-built function in OSB to convert it to XML ?
3. Any other inputs in order to transform the XML message coming in the payload field as CLOB/XMLType
Please provide your inputs and I hope that I have clearly explained my use case.
Thanks in advance for your time and help!!
Regards,
Dibya

Problem in mapping from import manager to Data manager

hi friend's....I got a problem while mapping the data from import manager to Data manager .The problem is the data in import manager (i.e source hierarchy) will map to single filed in data manager ( i.e target hierarchy)..
Help me it will be great full to me
Regards
Yugandhar

Hi Ana,
If you have a hierarchy in this format:
N1            N2                 N3
A              A1                 A11
A              A2                 A21
A              A3                 A31
B              B1                 B11
Then u have to follow these steps for import.
1. Select source file and destination hierarchy table at top of import manager.
2. Go to Partitions tab (Second tab) Just above the tabs, if u click on the plus sign against your source file, you will see N1, N2 and N3. Cick on N1 and in partition tab, add N2 to right side by double clicking on N2.
3. Now add N3 to right side by double clicking on it.
4. Go to field mapping (Third tab). There you will see a field N1(Partition). Map this field to yourhierarchy field on destination side.
5. In value mapping (Below the field mapping), Expand your source hierarchy. Select all (ctrl + A). Click on "Add" button. Select "Add Branch as child" option.
6. Go to Matching tab (Fourth tab). only one field will be there. take ity on the right side. and select the import action as "Create".
7. Go to last tab. Click on import button.
Your hierarchy has been imported. You can check it in data manager (in hierarchy mode).
Hope this solves your problem.
Regards,
Dheeraj.

Problem - Channel Mapping in Audition 5.5 CS

Similar Messages

Maybe you are looking for