Problem class important error while executing Query from favorites

Hi Experts,
1. I have tried execute the query from favorites it is showing the error message. " Problem class important"
    In the message text: logs showing error message [Attached the message screenshot].
2. From "Query Designer" Execute [Ctrl+R] gives the error "500 Internal Server Error" [Attached the screenshot]
3. Able to execute the reports from RRMX.
No ST22 dumps. Can any one suggest about...how to rectify the errors.
Thanks in advance...Surya

Need tyo make sure the problem is with the query/workbook are general issue with all workbooks/query.
1. Make sure the base query of work book is still executable. RRMX/RSRT.
2. Execute the work book in Bex/Excel and look for definition of workbook; there might be some thing in the workbook referencing other than base query.
3. If other workbook are also not working? need to check if other users have same issue.?
Hope this will help to narrow the problem.
Gopi

Similar Messages

  • Error while executing query in OLAP server

    Dear all,
    we are using APD to extracted sales data for the last 3 months .this APD was executed perfectly till yesterday.
    in today's run APD got failed with error message as below
    "@5C\QError@     Fiscal year variant Z3 is not maintained for calendar year 9999
    "@5C\QError@     Error while executing query in OLAP server; redesign query.
    Please suggest corrective action .
    I have tried executing manually with less selections on creation date by no success..
    regards,
    puru

    Purushotham wrote:
    Hi Jeeth,
    >
    > in query we have selection for " currency type " and created on "  .we are not using fiscal year variant.
    >
    > in first strep of APD design only we have a problem and also recently there are no changes to this APD .
    >
    > It was executed perfectly on till 4th .
    >
    > Edited by: Purushotham on Feb 6, 2012 12:48 PM
    Dear Purushotham, You can maintain the Fiscal year Variant in OB29. 2 possibilities, #1 : Data for the FYV/Year could be wrong. #2 : Updates for Fiscal Year might not have been done. You can maintaine FY varients up to FY 2XXX in your BW system. This should fix the error. The table T009 must be the same as we get when we do OB29 TCode in BW, so via SPRO do rebuild of table again.
    Edited by: Arun Bala G on Feb 6, 2012 4:05 PM

  • Web Analysis Error -- Error while executing query and retrieving data

    Regarding Web Analysis:
    We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
    The error is:
    Error while executing query and retrieving data.; nested exception is:
    com.hyperion.ap.APException: [1033] Native:
    1013033[Thu Oct 22 09:08:17
    2009]server name/application name/database name/user name/Error91013033)
    ReportWriter exit abnormally
    Does anyone have any insight into what is going on?
    My version information is:
    Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
    Web Analysis 9.3.0.0.0.286
    Thanks in advance for your help.
    DaveW

    Hi,
    And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
    And if you get any error in checking, see the long message(detail).
    With rgds,
    Anil Kumar Sharma .P

  • MDX Query Returns Error while Executing this from SSMS through openquery

    Hi I'm getting this kind of Error while executing this ..
    Pls help to get it solve .

    Hi Ashish,
    According to your screenshot, it seems you can create a linked server from a SQL Server to the SSAS server, then use OpenQuery to get Analysis Services database structure, right? In this case, please ensure tha you setting is correctly, here is blog which
    describe how to do it step by step, please refer to the link below to see the details.
    http://dwbi1.wordpress.com/2010/01/01/ssas-dmv-dynamic-management-view/
    http://www.ssas-info.com/VidasMatelisBlog/144_using-ssrs-to-report-ssas-2008-database-structure-using-dmvs#more-144
    Hope this helps.
    Regards,
    Charlie Liao
    TechNet Community Support

  • Error  while executing query through rsrt

    hello experts,
    I am facing following error while executing one HR query through rsrt.
    "System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text) "
    while executing query through rsrt it automatically goes to debug mode, coming out of debug mode i get the screan showing above error message.
    What would be an issue?
    Regards,
    Nirav
    Edited by: Nirav Shah on Apr 21, 2008 8:19 AM

    Hi ramesh,
    I havent kept any execlusion selection. Though i saw long text, it is like this:
    "Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
      Notification Number BRAIN 299 "
    Regards,
    Nirav

  • Error while executing query in BEX

    Hi All,
    I am experiencing an issue while executing query on FIAR_C03.
    "Abort No Values could be determined for variable 0P_FVAEX
    Error specify a value for 0P_FVAEX
    Abort system error in program SAPLRRKO and form APPEND_KHANDLE_1-01-
    I had searched SDN forums and found the similar error which is inculded in the below link:
    Bex Variable
    However, the solution specified is only for a particular 3 queries. Also the solution is that the 3 queries(Which are having errors) are replaced by another 3 queries.
    Can anybody help us in this regard.
    Regards
    YJ

    hi JY,
    try 858477 steps for other 'infected' webtemplates ?
    try implement correction in 660514 ?
    (also search other notes with keyword 0P_FVAEX
    e.g 585202)
    hope this helps.

  • ORA-01722: Error while executing query in Query Designer

    Hi All;
    I am getting the below error while executing a query
    ORA-01722: invalid number
    Error reading the data of InfoProvider
    Error while reading data; navigation is possible
    Have anyone encountered this before? How do i resolve this?
    Thanks!
    ~ Arun KK

    Hi,
    Did you checked all the setting required to run this query are present in the Qualtiy system??
    Which means all the characteristics,key figures are in active state.
    Also all the cubes are in active state with no issues with the involved in the dimensions used for the query.
    Also do a check in the query and if you have authorization try to save the same query and execute the saved one again in quality and see if the same error happens again.
    Thanks
    Ajeet

  • Error while executing report from Query designer

    Hi All,
    When I am executing from query designer, I am getting following error.
    Even I can't execute it from another portal where i created source system of BI server.
    But i can execute queriew from Query analyser and t-code RSRT.
    When I execute from Query desinger the url is as follows.
    http://XXX:00/irj/servlet/prt/portal/prtroot/pcd!3aportalcontent!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0PA_C01_Q0201&VARIABLE_SCREEN=X&DUMMY=5_
    And the error is:
    500 Internal Server Error
      BEx Web Application
    Failed to process request; contact your system administrator
    Information for Administrator
    To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
    1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1033246.
    2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool  does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
    3. When opening any customer message on this issue, please attach:
    Support Desktop Tool support info ZIP  file according to note 937697,*
    Required information for reproduction  according to note 948490.*
    Error Summary
    Exception occured while processing the current request; this exception cannot be handled by the application or framework
    If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
    To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
    Root Cause
    The initial exception that caused the request to fail was:
    java.lang.NullPointerException
    java.lang.NullPointerException
    at com.sap.ip.bi.webapplications.runtime.service.metadata.impl.MetadataAccess.getMetadataModel(MetadataAccess.java:139)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.getMetadataModel(Page.java:8953)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.normalizeCommands(Page.java:4963)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4473)
    at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:3316)
    Details: Full Exception Chain
    System Environment
    Server
    BI Java Release: 7 - Patch level: 0000000100 - Description: BI Web Applications Java - Additional info:  - Production mode: true
    BI ABAP unknown
    Java Virtual Machine Java HotSpot(TM) 64-Bit Server VM - Sun Microsystems Inc. - 1.4.2_24-b04
    Operating System SunOS - amd64 - 5.10
    REgards
    Mohan

    Hi mohan ,
      You can check these OSS notes for the issue  .
    1. 795699 - Customizing default error messages for HTTP
    2. 807000 - Http requests are not fully read after timeout
    3. 804124 - HTTP communication with XI Adapter Engine fails
    Regards,
    Lokesh

  • Error while executing query

    Hi all,
    I am not able to execute a report in BEx Analyzer. It keeps asking for userid and password and after that it gives message saying Query not yet calculated. When tried to execute again using the refresh button it disconnects from BW server. (I am typing correct userid and password).
    Tried to check for the query that was created. Even the query doesnt open in BEx Query Designer. It gives error message saying - System Error in Program CL_RSD_MULTIPROV and from FACTORY -02.
    Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
    (This query is built on Multiprovider). I went in the BW system and checked if the Multiprovider and its cubes were inactive. I found that there was no problem with Multiprovider and its cubes. All are in active and executable state.
    not sure what the problem is. Do let me know how we can resolve this issue.
    Thanks in advance.
    Maddy

    Hi,
    Reason for such error could be that you had some info-object either characteristic or key-figure in your query which now is deleted and since you are trying to open that query it is checking that info-object in source (multi-provider/cube/dso/infoset whatever is applicable in your case) which is not available and hence giving this error.
    You need to add that info-object in info-provider on which  query is built, ones you add that do necessary modification in query and then remove unwanted info-object from multi-provider.
    Regards,
    Akshay

  • CX_SY_NO_HANDLER Error While executing query in RSRT T-Code

    Hi Experts,
    I have created a data source extraction using function module.
    Then i have created customer exit variable, dso, infocube and all....
    my variable name is ZWBS_VAR and
            query name is WBS_VAR.
    while executing this query name I'm getting the exception CX_SY_NO_HANDLER.
    If i use WBS_VAR instead of ZWBS_VAR in when condition.. it is not showing that error.
    this is my code i have written in ZXRSRU01 include.
    DATA:it_wbs_elemt TYPE STANDARD TABLE OF /bic/awbsdsogn00,
         wa_wbs_elemt like line of it_wbs_elemt,
         L_S_RANGE TYPE RSR_T_RANGESID with header line,
         LOC_VAR_RANGE like line of i_T_VAR_RANGE,
         ZLOW TYPE C,
         LV_USER LIKE SY-UNAME,
         lv_user1 LIKE /bic/awbsdsogn00-/BIC/WBSE.
    CASE i_vnam.
    *****************************Start of Code for 'ZWBS_VAR' variable******************************
    when 'ZWBS_VAR'.
    lv_user = sy-uname.
    if lv_user CP '/BIC/WBSE'.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
    input = lv_user
    IMPORTING
    output = lv_user1.
    CLEAR wa_wbs_elemt.
    SELECT * FROM /bic/awbsdsogn00 INTO TABLE it_wbs_elemt WHERE /BIC/WBSE = lv_user1.
    READ TABLE it_wbs_elemt INTO wa_wbs_elemt WITH KEY /BIC/WBSE = lv_user1.
    IF sy-subrc = 0.
    l_s_range-low = wa_wbs_elemt-/BIC/WBSE.
    l_s_range-sign = ' I '.
    l_s_range-opt = ' EQ'.
    APPEND l_s_range TO e_t_range.
    ENDIF.
    ENDIF.
    ENDCASE.
    IF I_STEP = 3.
    LOOP at i_t_var_range INTO loc_var_range WHERE vnam = 'ZWBS_VAR'.
    CLEAR : l_s_range.
    zlow = loc_var_range-low.
    lv_user = sy-uname.
    CALL FUNCTION 'CONVERSIOn_EXIT_ALPHA_OUTPUT'
    EXPORTING
    input = loc_var_range-low
    IMPORTING
    output = loc_var_range-low.
    IF lv_user NE loc_var_range-low.
    IF lv_user CP '/BIC/WBSE'.
    CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
    EXPORTING
    I_CLASS = 'RSBBS'
    I_TYPE  = 'E'
    I_NUMBER = '000'
    I_MSGV1 = 'You are not authorized for the WBS ELEMENT'
    I_MSGV2 = loc_var_range-low
    I_MSGV3 = 'Enetr your valid WBS ELEMENT'
    I_MSGV4 = lv_user
    EXCEPTIONS
    OTHERS = 02.
    RAISE Again.
    ELSE.
    l_s_range-low = loc_var_range-low.
    l_s_range-sign = loc_var_range-sign.
    l_s_range-opt = loc_var_range-opt.
    APPEND l_s_range TO e_t_range.
    ENDIF.
    ENDIf.
    ENDLOOP.
    ENDIF.
    If you find any errors in this piece of code please let me know..
    Thanks&Regads,
    Sirisha.

    Hey think other way round .
    Filtering the report with the partner(current user executing the report) will suffice your requirement .
    Am I correct ?
    If yes then follow this simple approach .
    Create a variable(mandatory, not ready for input ) of type customer exit on partner infoobject and filter your report with this variable .
    In this way the current user executing the report can see data only related to him .
    Type the below code in cmod .
    WHEN '(give your variable name).
         DATA :lv_bp        TYPE /bi0/oibpartner,
        CHECK i_step EQ '1'.
        lv_bp = sy-uname.
        IF lv_bp IS NOT INITIAL.
          lv_bp = ( sy-uname ) .
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input  = lv_bp
            IMPORTING
              output = lv_bp.
          l_s_range-sign = 'I'.
          l_s_range-opt  = 'EQ'.
          l_s_range-low  = lv_bp .
          APPEND l_s_range TO e_t_range.
          CLEAR : l_s_range,lv_bp.
        ENDIF.
    If this approach is not flexible in ur case then let me know will change the code what u have written as I can see many errors in that .
    Also I can figure it out that the whole code is ctrl c ctrl v of that sdn document but his requirement was quite different than yours .

  • SQl Error while executing query in BEx

    Hi All,
    We are executing a Report in Bex 7.0 and we get the selection screen once i give the slections and execute it after running for few mins ( say 3 mins), its giving the below error message.
    Error Sql: 1578
    Error ORA-01578 ORACLe DATA BLOCK Corrupted(file #120, block #21118) ORA.
    Errors occured during parallel process of Query 15;RC:3
    Error while reading data Navigation is not possible.
    I have regenerated the Query in RSRT, but no errors from it.
    Other queries are working fine from BEx in the same BW system.
    Plaese provide any inputs on this.
    Thanks & Regardsm
    Ganesh Thota

    HI,
    Try the below sequence, not sure if it works for you.
    Go to query properties
    In advance tab
    Check the box "Allow external access to this query" and re-execute the query
    this might help
    regards,
    ray

  • Error while executing query after migration

    I have migrated a  query to 7. While executing the report following error occurs
    When I attempt to open a query, (I get past the login and query selection screens) I get the following error:
    "Creation of item TEXTELEMENT_xx Failed" (20 or so lines)
    After which the variable entry screen pops up, but no data is displayed when the query returns due to the creation of the elements failing.
    Excel 2007 Office SP2. SAP GUI 710
    Please suggest.
    Regards,
    Raj.

    Hi Raj,
    I also faced this problem with Excel 2007 BI
    I was able to resolve the problem with the following
    This problem is because changes to excel in the 2007
    first try reinstalling the GUI components If it works with the reinstallation then its fine
    if not try Installing FEP 900 (Latest patch for BEX Suite) and GUI 7.10 patch 13
    this definitely solves your problem
    Thank you

  • Error while executing query in SQL Developer

    I am getting the following error whenever I login to sql developer.
    SEVERE 56 0 oracle.jdbc Error while registering Oracle JDBC Diagnosability MBean.
    I get below error whenever I execute any query.
    SEVERE 70 53918 oracle.dbtools.worksheet.sqlhistory.SqlHistoryTask oracle.dbtools.worksheet.sqlhistory.db.HistoryDB.readHistory(HistoryDB.java:99)
    I use following versions
    Java(TM) Platform 1.6.0_35
    Oracle IDE 3.2.20.09.87
    Versioning Support 3.2.20.09.87
    I am working on Oracle11gR2.
    Please help me to resolve this and let me know if you need more information.

    Got same issue with :
    Component
    Version
    =========
    =======
    Java(TM) Platform
    1.6.0_41
    Oracle IDE
    3.2.20.09.87
    Versioning Support
    3.2.20.09.87
    Alternate path for SqlHistory directory :
    C:\Users\USER_NAME\AppData\Roaming\SQL Developer
    Best Regards,
    F.L.

  • REP - 300 Error while executing report from Application

    Hi,
    I have report in Report Builder & for the same report form is there in Form Builder in which parameter page is designed. From application where I am calling report is internally calling form & in form Procedure Run Report is there which is calling report from Report Builder. Both report from builder & form form Builder are compiled . Also query is executing fine in Toad without error. Also all query fields are present in database.
    But when I am trying to excute report from Application it is giving error as "REP - 300 Invalid Identifier " & it displays whole query.
    Note - Report & it's Form are in ORACLE - 10g. Also the user through which I am executing report from application is ADMIN user , so it has executing permission.

    looks like error in parameters. check out the value of variable that you are passing through to report from form. Put a messages to see variable values before execute report.

  • Error While Executing Sqlplus from shell

    I am trying to execute the below shell script with out back ticks(`${ORACLE_HOME}/bin/sqlplus) while calling sqlplus in the below code. When i do that all the next lines after that are changing to red color in vi and when i execute the script i am getting an error as "syntax error: unexpected end of file". may i know i please know what could be the issue? i suspect it could be because of EOF, when i have the backticks on it is executing fine.
    #!/bin/bash
    logit "Updating the Validation Status Field in ${DBSTGUSER}.FEED_PROCESS_LOG Table as RUNNING With Matching Parameters"
            logit "UNINUM :: ${UNINUM} PROVIDER :: ${PROVIDER} EXTRACT_DT :: ${EXTRACT_DT} VER_NUM :: ${VER_NUM}"
            `${ORACLE_HOME}/bin/sqlplus ${DBSTGUSER}/${DBSTGPASS}@${DBSRC} <<EOF > ${UPD_FEED_PROC_LOG}
            spool ${UPD_SQL1}
            UPDATE ${DBSTGUSER}.FEED_PROCESS_LOG SET VALIDATION_STATUS='RUNNING'
            WHERE UNINUM='${UNINUM}' and PROVIDER='${PROVIDER}' and EXTRACT_DT='${EXTRACT_DT}'
            and VER_NUM=${VER_NUM} and ACT_END_DT IS NULL  AND (VALIDATION_STATUS IS NULL OR VALIDATION_STATUS='RUNNING');
            spool off;
            COMMIT;
            EXIT;
            EOF`
            if grep -q "ERROR" ${UPD_FEED_PROC_LOG}
            then
                    logit "Error While Updating the ${DBSTGUSER}.FEED_PROCESS_LOG Table"
                    logit "Please Check ${UPD_FEED_PROC_LOG} Log File For Detailed Information"
                    exit 3
            else
                    logit "Updation Of ${DBSTGUSER}.FEED_PROCESS_LOG Table Completed Successfully"
                    logit "Please Check ${UPD_FEED_PROC_LOG} Log File For Detailed Information"
            fi

    Ariean wrote:
    I thought forum will have people with mixed skills (sql/scripting) they would be able to quickly point me to right direction. There is no problem is with RDBMS!
    I know EOF stands for End of file and i am piping the data into the program (sqlplus).You could just as well use "FUBAR" in place of EOF; which just happens to be some arbitrary string.
    piping ("|") is NOT involved , as in env | sort
    you don't know, what you don't know.

Maybe you are looking for