Problem compiling the Ralink 5390 driver

I've tried what it says in here https://bbs.archlinux.org/viewtopic.php?id=117763 but then when I run make it gives me an error 2. This is the output:
make -C tools
make[1]: Entering directory `/home/user/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/home/user/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/tools'
/home/use/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/tools/bin2h
cp -f os/linux/Makefile.6 /home/user/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/os/linux/Makefile
make -C /lib/modules/3.2.1-2-ARCH/build SUBDIRS=/home/user/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/os/linux modules
make: *** /lib/modules/3.2.1-2-ARCH/build: No such file or directory. Stop.
make: *** [LINUX] Error 2
[erdave@ghost-pc 2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO]$ make
make -C tools
make[1]: Entering directory `/home/user/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/home/user/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/tools'
/home/user/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/tools/bin2h
cp -f os/linux/Makefile.6 /home/user/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/os/linux/Makefile
make -C /lib/modules/3.2.1-2-ARCH/build SUBDIRS=/home/user/.wifi/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO/os/linux modules
make: *** /lib/modules/3.2.1-2-ARCH/build: No such file or directory. Stop.
make: *** [LINUX] Error 2

cause i ran lsmod and it seems that its using the rt2800 modules. the wireless does not show any network on range...
Last edited by ErSoul (2012-01-28 18:51:27)

Similar Messages

I refurbished my macbook air 7 months ago because there was a problem with the steady state drive. Now my battery seems to be dead again. How long does the warranty last? Do I need to pay for a new battery?

I refurbished my macbook air 7 months ago because there was a problem with the steady state drive. Now my battery seems to be dead again. How long does the warranty last? Do I need to pay for a new battery?

As I wrote Apple will diagnose an Apple product even if it is out of warranty for free. That should be your first step to find out if the problem is the battery or something else.
Once you have Apple telling you a 7 month old battery is defective (if that turns out to be the case) then it becomes a game of horse trading. You'll need to speak to the tech and when he tells you there is nothing he can do you will need to speak to the tech manager and when she says most likely there is nothing they can do you go to the store manager, etc. It is unlikely (though possible) that they will give in easily you need to be firm, polite and let on that you're willing to accept a partial reimbursement.
So again the first step is to find out what is wrong.
good luck

Are you having problems with the Lacie external drive after upgrading to the new operating system

Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

See here for everyone discussing the issue you are having:
https://discussions.apple.com/thread/5475136?tstart=0

Problems with the CD/DVD drive on my presario CQ50-108NR

Hey there.
I picked up the above listed laptop a short time ago, and I have discovered a problem that I can't seem to solve.
The CD/DVD drive reads and plays movies well enough, but it will not read CD's; any CD, be it data, music, images, whathaveyou. When I try to access the CD it keeps telling me that I need to insert a disk into the drive.
Again, it plays DVD movies well enough, not a hitch there. It just won't read CD's.
I'd love to assume that it's a driver issue (which would be the simplest and cheapest to fix), but I hate assuming anything where computers are concerned.
Thanks in advance for any and all help.

Is this a used Notebook?
Use device manager to uninstall the DVD drive, open DM, expand the DVD drive, then right clcik on the dvd drive and select "uninstall" Keep DM open, now right click on any device and select "scan for hardware changes" Windows will reinstall a clean copy of the driver. Reboot the notebook
If this does not fix it, the drive is bad.

Problem using the PDF Printer driver in LC ES 8.2

Hi all,
I have a problem making the PDF Generator Printer driver work. I am able to print a document, and it is successfully converted to pdf, but the send email service fails. The error message is:
2008-08-27 15:22:21,671 INFO [com.adobe.ipp.pdfgclient.ResponseGenerator] ALC-PDG-006-017-Refetched the email configuration details from provider.email_sendmail_service after 5 minutes.
2008-08-27 15:22:21,671 INFO [STDOUT] java.lang.Exception: 40002
2008-08-27 15:22:21,671 INFO [STDOUT] at com.adobe.ipp.pdfgclient.EmailSender.send(EmailSender.java:135)
2008-08-27 15:22:21,671 INFO [STDOUT] at com.adobe.ipp.pdfgclient.ResponseGenerator.sendmail(ResponseGenerator.java:154)
2008-08-27 15:22:21,671 INFO [STDOUT] at com.adobe.ipp.pdfgclient.ResponseGenerator.sendResponse(ResponseGenerator.java:95)
2008-08-27 15:22:21,671 INFO [STDOUT] at com.adobe.ipp.pdfgclient.JobIdPoller.run(JobIdPoller.java:94)
2008-08-27 15:22:21,671 INFO [STDOUT] at java.util.TimerThread.mainLoop(Timer.java:512)
2008-08-27 15:22:21,671 INFO [STDOUT] at java.util.TimerThread.run(Timer.java:462)
I tried with two different mail servers, with same result. I have configured both EmailService: 1.0 and SendEmailService: 1.0 . Has anyone encountered this error before?

Hi,
I have configured provider.email_sendmail_service: 1.0 service according to our mail server. And also I have configured print driver on client with a user which is synchronized with our directory. But I cant receive the converted pdf as email; I get the following:
2008-11-24 18:01:15,171 INFO [com.adobe.ipp.pdfgclient.PsToPDF] ALC-PDG-001-000-Submitted : review.txt - Notepad IPPJob ID cf3bb155c0a8021c0000000013f1c773
2008-11-24 18:01:15,203 INFO [com.adobe.pdfg.DistillerImpl] ALC-PDG-001-000-
Job ID for the submitted createPDF job =ipp.ps251ac9-4cb1e5-412c5b-9ec173-b0cd7e-2e7462
2008-11-24 18:01:15,234 INFO [com.adobe.pdfg.DistillerImpl] ALC-PDG-001-024-ipp.ps: Time Job Submitted: 11/24/08 6:01 PM
2008-11-24 18:01:15,234 INFO [com.adobe.pdfg.DistillerImpl] ALC-PDG-001-016-ipp.ps: Job Type: Convert to PDF
2008-11-24 18:01:15,234 INFO [com.adobe.pdfg.DistillerImpl] ALC-PDG-001-017-ipp.ps: Job Submitted by User: oguzatak
2008-11-24 18:01:15,421 INFO [com.adobe.pdfg.DistillerImpl] ALC-PDG-001-008-Begin PS/EPS/PRN to PDF Conversion
2008-11-24 18:01:15,828 INFO [com.adobe.pdfg.DistillerImpl] ALC-PDG-001-009-END PS/EPS/PRN to PDF Conversion
2008-11-24 18:01:15,828 INFO [com.adobe.pdfg.DistillerImpl] ALC-PDG-001-027-ipp.ps: Job Completion Status: Succeeded
2008-11-24 18:01:15,828 INFO [com.adobe.pdfg.DistillerImpl] ALC-PDG-001-025-ipp.ps: Time Job Completed: 11/24/08 6:01 PM
2008-11-24 18:01:15,828 INFO [com.adobe.pdfg.DistillerImpl] ALC-PDG-001-026-ipp.ps: Time of Job Execution: 625 ms
2008-11-24 18:01:16,328 INFO [com.adobe.ipp.pdfgclient.ResponseGenerator] ALC-PDG-006-017-Refetched the email configuration details from provider.email_sendmail_service after 5 minutes.
2008-11-24 18:01:16,515 INFO [com.adobe.ipp.pdfgclient.EmailSender] EmailSender error : 550 The address is not valid.
2008-11-24 18:01:16,515 INFO [STDOUT] java.lang.Exception: 550 The address is not valid.
2008-11-24 18:01:16,515 INFO [STDOUT] at com.adobe.ipp.pdfgclient.EmailSender.send(EmailSender.java:247)
2008-11-24 18:01:16,515 INFO [STDOUT] at com.adobe.ipp.pdfgclient.ResponseGenerator.sendmail(ResponseGenerator.java:154)
2008-11-24 18:01:16,515 INFO [STDOUT] at com.adobe.ipp.pdfgclient.ResponseGenerator.sendResponse(ResponseGenerator.java:95)
2008-11-24 18:01:16,515 INFO [STDOUT] at com.adobe.ipp.pdfgclient.JobIdPoller.run(JobIdPoller.java:94)
2008-11-24 18:01:16,515 INFO [STDOUT] at java.util.TimerThread.mainLoop(Timer.java:512)
2008-11-24 18:01:16,515 INFO [STDOUT] at java.util.TimerThread.run(Timer.java:462)
I have double checked the users credential for smtp user.

Has anyone else experienced problems with the disc burner/driver software not being found?

I am trying to burn music onto a disc and it is telling me that the disc burner/driver software has not been found. Has anyone else experienced this with their MacBook Pro?

SuperDrives wear out - it seems that yours might be on the verge of a mechanical failure. I'd just replace it, buying a new drive from Other World Computing and installing it yourself (because Apple would charge a small fortune).
Clinton

ASM creation problem Initializing the Oracle ASMLib driver: failed

hi
oel 5.6 64bit
db 11gR2 64bit
[root@rac-1 ASM]# rpm -qa | grep ora
oracleasm-2.6.18-164.el5xen-2.0.5-1.el5
libtheora-1.0alpha7-1
oracleasm-2.6.18-164.el5debug-2.0.5-1.el5
oracleasm-2.6.18-164.el5-2.0.5-1.el5
oracle-logos-4.9.17-10
oracle-validated-1.1.0-7.el5
oraclelinux-release-5-6.0.1
oracleasm-support-2.1.4-1.el5
[root@rac-1 ASM]# rpm -qa | grep asm
nasm-0.98.39-3.2.2
oracleasm-2.6.18-164.el5xen-2.0.5-1.el5
oracleasm-2.6.18-164.el5debug-2.0.5-1.el5
oracleasm-2.6.18-164.el5-2.0.5-1.el5
oracleasm-support-2.1.4-1.el5
[root@rac-1 ASM]#
[root@rac-1 ASM]# oracleasm configure
ORACLEASM_ENABLED=true
ORACLEASM_UID=oracle
ORACLEASM_GID=asmadmin
ORACLEASM_SCANBOOT=true
ORACLEASM_SCANORDER=""
ORACLEASM_SCANEXCLUDE=""
[root@rac-1 ASM]# service oracleasm restart
Dropping Oracle ASMLib disks:                              [ OK ]
Shutting down the Oracle ASMLib driver:                    [ OK ]
Initializing the Oracle ASMLib driver:                     [FAILED]
[root@rac-1 ASM]#can anyone help??

hi
just another confirmation i need :
i have some raw devices using /etc/rawdevices file and losetup to /dev/loop(n); can you say what are the udev rules to set so that all the permission and loop(n) devices come up before ASMLib driver initialization ?? eg.
http://www.idevelopment.info/data/Oracle/DBA_tips/Automatic_Storage_Management/ASM_20.shtml
[root@rac-1 ~]# oracleasm listdisks
VOL1
[root@rac-1 ~]# oracleasm createdisk VOL2 /dev/loop1
Unable to access device "/dev/loop1"
[root@rac-1 ~]# losetup /dev/loop1 /oracle_ASM_SWAP/ASM/ASM_FILE1
[root@rac-1 ~]# oracleasm createdisk VOL2 /dev/loop1
Writing disk header: done
Instantiating disk: done
[root@rac-1 ~]# losetup /dev/loop2 /oracle_ASM_SWAP/ASM/ASM_FILE2
[root@rac-1 ~]# oracleasm createdisk VOL3 /dev/loop3
Unable to access device "/dev/loop3"
[root@rac-1 ~]# oracleasm createdisk VOL3 /dev/loop2
Writing disk header: done
Instantiating disk: done
[root@rac-1 ~]# losetup /dev/loop3 /oracle_ASM_SWAP/ASM/ASM_FILE3
[root@rac-1 ~]# oracleasm createdisk VOL4 /dev/loop3
Writing disk header: done
Instantiating disk: done
[root@rac-1 ~]# losetup /dev/loop4 /oracle_ASM_SWAP/ASM/ASM_FILE4
[root@rac-1 ~]# oracleasm createdisk VOL5 /dev/loop5
Unable to access device "/dev/loop5"
[root@rac-1 ~]# oracleasm createdisk VOL5 /dev/loop4
Writing disk header: done
Instantiating disk: done
[root@rac-1 ~]# losetup /dev/loop5 /oracle_ASM_SWAP/ASM/ASM_FILE5
[root@rac-1 ~]# oracleasm createdisk VOL6 /dev/loop5
Writing disk header: done
Instantiating disk: done
[root@rac-1 ~]# oracleasm listdisks
VOL1
VOL2
VOL3
VOL4
VOL5
VOL6
[root@rac-1 ~]#http://admindba.com/forum.php?gcm=2&grid=115612
assigning to /etc/rc.local making the disk available only VOL1 not others.
can i still use ADVM ??
[oracle@rac-1 dbs]$ . ~/.orcl_ASM.profile
[oracle@rac-1 dbs]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Mon Apr 4 11:34:51 2011
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> !
[oracle@rac-1 dbs]$ ls
hc_orcl.dat   init.ora      lkORCL     spfileorcl.ora
init+ASM.ora initorcl.ora orapworcl
[oracle@rac-1 dbs]$ exit
SQL> startup
ORA-01078: failure in processing system parameters
ORA-29701: unable to connect to Cluster Synchronization Service
SQL> startup pfile='/oracle_db/oracle/product/11.2.0/dbhome_1/dbs/init+ASM.ora';
ORA-29701: unable to connect to Cluster Synchronization Service
ORA-01078: failure in processing system parameters
SQL> Disconnected
[oracle@rac-1 dbs]$ cd /oracle_db/oracle/product/11.2.0/dbhome_1/bin/l
lbuilder      ldapcompare   ldapsearch    loadpsp       lxchknlb
lcsscan       ldapdelete    ldifmigrator loadpspO      lxegen
ldapadd       ldapmoddn     linkshlib     lsnodes       lxinst
ldapaddmt     ldapmodify    lmsgen        lsnrctl
ldapbind      ldapmodifymt loadjava      lsnrctl0
[oracle@rac-1 dbs]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Mon Apr 4 11:47:18 2011
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> create spfile from pfile='/oracle_db/oracle/product/11.2.0/dbhome_1/dbs/init+ASM.ora';
File created.
SQL> startup
ORA-29701: unable to connect to Cluster Synchronization Service
SQL> Disconnected
[oracle@rac-1 dbs]$ vi .orcl_ASM.profile
[oracle@rac-1 dbs]$ vi .orcl_ASM.profile
[oracle@rac-1 dbs]$ . .orcl_ASM.profile
[oracle@rac-1 dbs]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Mon Apr 4 11:50:29 2011
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup mount
ORA-29701: unable to connect to Cluster Synchronization Service
SQL> Disconnected
[oracle@rac-1 dbs]$ ls
hc_orcl.dat   init.ora      lkORCL     spfile+ASM.ora
init+ASM.ora initorcl.ora orapworcl spfileorcl.ora
[oracle@rac-1 dbs]$ vi init+ASM.ora
[oracle@rac-1 dbs]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Mon Apr 4 11:51:25 2011
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> create spfile from pfile='/oracle_db/oracle/product/11.2.0/dbhome_1/dbs/init+ASM.ora';
File created.
SQL> startup mount
ORA-29701: unable to connect to Cluster Synchronization Service
SQL>how to get rid of ORA-29071 for this new ASM instance creation??
http://www.oracledba.org/10g/asm/asm_install.html
this is 10g related.
kind regards

Problem with the iPhone Camera Driver.

I have the Original iPhone with a 3.1.2 OS and I'm on a Windows Vista Ultimate x64 machine. The "Apple Mobile Device USB Driver" is installed and everything works perfectly normal, iTunes recognizes the iPhone and I can transfer files and use all the functions iTunes has. The only problem I have is that when I plug in my iPhone the "iPhone" driver fails to install every time therefor it's not showing on My Computer and I can't get the photos from my phone as the driver I need makes the iPhone look as a 'Digital Still Camera'. I tried uninstalling and reinstalling every Apple related software multiple times, uninstalled and reinstalled the drivers from the Device Manager and scanned for hardware changes but nothing worked. I also tried to change various USB ports and followed other simple instructions given by people on forums but none of these worked. I would really appreciate if anyone can help me solve this problem.
This is the problem message I'm getting when it fails to install;
http://www1.speedyshare.com/files/20781820/download/Problem.jpg
..and this is the report for that same error;
http://www3.speedyshare.com/files/20781858/download/Report.jpg
I think it's important to mention that I plugged in my phone on another machine (Windows XP) and every thing worked good.
Thanks in advance.
Message was edited by: StiJv

I have a 3GS and was having many problems with my device driver using Windows 7.
The solution I found was to uninstall the driver
Can do this through Device Manager--
KEY STEP: I also read that having any photos in your CAMERA ROLL which you saved from the internet or email will INTERFERE with proper installation of the driver.
Save yourself some headaches and before going through these steps make sure you delete all images in your camera roll which were saved from email or the internet. I beat my head against the wall for a good hour because I couldn't believe it would make a difference--it does--I have no idea why.
THEN:
Open device manager and navigate to "Portable Devices" and uninstall the driver.
Unplug the iphone and plug it back in. The driver should install normally and actually be functional. It worked for me anyway.
Hope this helps.

Problem with the IDT audio driver.

Hi
i got a problem with my audio driver yesterday. while watching a video the driver stopped working and it says that "no audio output installed". i tried reinstalling the idt software from hp website. but it is no help, in the middle of the installation process the computer is showing an error saying that the idt software is not compatible with the hardware detected.
I need my audio drivers as soon as possible as i have a presentation to do. Please help asap.!!

Hi
First uninstall the software from program and features.
Or, you can uninstall IDT Audio Driver from your computer by using the Add/Remove Program feature in the Window's Control Panel.
On the Start menu (for Windows 8, right-click the screen's bottom-left corner), click Control Panel, and then, under Programs, do one of the following:
Windows Vista/7/8: Click Uninstall a Program.
Windows XP: Click Add or Remove Programs.
When you find the program IDT Audio Driver, click it, and then do one of the following:
Windows Vista/7/8: Click Uninstall.
Windows XP: Click the Remove or Change/Remove tab (to the right of the program).
Follow the prompts. A progress bar shows you how long it will take to remove IDT Audio Driver.
Please try to install this software and see if this fixes your issue. In case this does not work try performing system restore to the date where unit was working fine.
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_130088_1
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Problem in the iFS map drive...!

Thanks for your concern:
As you know, in window explorer,iFS map drive is very convenient facility.According to install procedure in some documents, i installed these on client-pc and rebooted. But there was no notification for which machine is iFS server when i mapped iFS server to map-drive in local.In set&admin guide,there might be some notification beside machine name in map-network drive diallog box as like "iFS server".
what's wrong?. but,in program group of start menu,iFS utilities are generated correctly.
Only in mapping iFS drive,these problems are occured.
I wonder:
1.When iFS server is started with ifsstart command, Are there any droped,but essential,agent or protocol by my mistake?
thanks......
null

Something wrong in IfsProtocols.log file..
What should I do?
IfsProtocols.log
Wed Aug 23 15:56:36 JST 2000
IfsException in starting ServerManager; FATAL
oracle.ifs.common.IfsException: IFS-10620: Unable to construct connection pool
oracle.ifs.common.IfsException: IFS-10633: Unable to create library connection
oracle.ifs.common.IfsException: IFS-10600: Unable to construct library connection
java.sql.SQLException: ORA-01033: ORACLE initialization or shutdown in progress
Server Manager exiting.
Wed Aug 23 15:58:18 JST 2000
Server STARTED: IfsProtocols(37416) not managed
Attempting to load agent FtpServerAgent
Agent FtpServerAgent loaded
Attempting to start agent FtpServerAgent
Agent FtpServerAgent started
Attempting to load agent CupServerAgent
Agent CupServerAgent loaded
FtpServerAgent: Start request
Server STARTED: IfsAgents(37415) not managed
FtpServerAgent: passing credentials
FtpServerAgent: starting timer
FtpServerAgent: Timer timeouts remaining set to 4
Attempting to start agent CupServerAgent
Agent CupServerAgent started
Attempting to load agent NtfsServerAgent
Agent NtfsServerAgent loaded
CupServerAgent: Start request
CupServerAgent: passing credentials
CupServerAgent: starting timer
CupServerAgent: Timer timeouts remaining set to 4
Attempting to start agent NtfsServerAgent
Agent NtfsServerAgent started
Attempting to load agent WcpServerAgent
Agent WcpServerAgent loaded
NtfsServerAgent: Start request
NtfsServerAgent: passing credentials
NtfsServerAgent: starting timer
NtfsServerAgent: Timer timeouts remaining set to 4
Attempting to start agent WcpServerAgent
Agent WcpServerAgent started
Attempting to load agent ImapServerAgent
WcpServerAgent: Start request
Agent ImapServerAgent loaded
WcpServerAgent: passing credentials
WcpServerAgent: starting timer
WcpServerAgent: Timer timeouts remaining set to 4
Attempting to start agent ImapServerAgent
Agent ImapServerAgent started
Attempting to load agent SmtpServerAgent
Agent SmtpServerAgent loaded
ImapServerAgent: Start request
ImapServerAgent: passing credentials
ImapServerAgent: starting timer
ImapServerAgent: Timer timeouts remaining set to 4
Attempting to start agent SmtpServerAgent
Agent SmtpServerAgent started
SmtpServerAgent: Start request
SmtpServerAgent: passing credentials
SmtpServerAgent: starting timer
SmtpServerAgent: Timer timeouts remaining set to 4
Server STARTED: CupServer(37600) managed by IfsProtocols(37416)
CupServerAgent: Server STARTED: CupServer(37600) managed by IfsProtocols(37416)
Server STARTED: FtpServer(37619) managed by IfsProtocols(37416)
FtpServerAgent: Server STARTED: FtpServer(37619) managed by IfsProtocols(37416)
Server STARTED: WcpServer(37621) managed by IfsProtocols(37416)
WcpServerAgent: Server STARTED: WcpServer(37621) managed by IfsProtocols(37416)
FtpServerAgent: timer expired with internal status of Starting...
FtpServerAgent: remaining timeouts reduced to 3
FtpServerAgent: Server Created with internal status of Starting...
FtpServerAgent: stopping timer
WcpServerAgent: timer expired with internal status of Starting...
WcpServerAgent: remaining timeouts reduced to 3
WcpServerAgent: Server Created with internal status of Starting...
WcpServerAgent: stopping timer
CupServerAgent: timer expired with internal status of Starting...
CupServerAgent: remaining timeouts reduced to 3
CupServerAgent: Server Created with internal status of Starting...
CupServerAgent: stopping timer
ImapServerAgent: timer expired with internal status of Starting...
ImapServerAgent: remaining timeouts reduced to 3
NtfsServerAgent: timer expired with internal status of Starting...
NtfsServerAgent: remaining timeouts reduced to 3
SmtpServerAgent: timer expired with internal status of Starting...
SmtpServerAgent: remaining timeouts reduced to 3
Server STARTED: ImapServer(37647) managed by IfsProtocols(37416)
ImapServerAgent: Server STARTED: ImapServer(37647) managed by IfsProtocols(37416)
ImapServerAgent: Server Created with internal status of Starting...
ImapServerAgent: stopping timer
Server STARTED: SmtpServer(37658) managed by IfsProtocols(37416)
SmtpServerAgent: Server STARTED: SmtpServer(37658) managed by IfsProtocols(37416)
SmtpServerAgent: Server Created with internal status of Starting...
SmtpServerAgent: stopping timer
NtfsServerAgent: timer expired with internal status of Starting...
NtfsServerAgent: remaining timeouts reduced to 2
Server STARTED: NtfsServer(37667) managed by IfsProtocols(37416)
NtfsServerAgent: Server STARTED: NtfsServer(37667) managed by IfsProtocols(37416)
NtfsServerAgent: Server Created with internal status of Starting...
NtfsServerAgent: stopping timer
null

Problems with the graphic card driver after update?

First my brand new Macbooks main board had to be replaced since I couln`t charge the battery. After 3 weeks on service it`s back. Everything is fine until I update the drivers. After the restart the screen displays totaly wrong colors. Take a look below. What could be the problem, and can I solve it?
http://www.blog.tyrkiskpepper.com/blog_img/screen.jpg
Thanks,
Andreas

Some user post that when they reset the pram and pmu and change the resolution screen to its native (biggest) resolution, it will solve the problem.
Do some more search on discussion search column on your right upper corner.
Good Luck

Problems with the 52.14 driver

Hi
My problems is: every time I install the 52.14 or 53.03 drivers, I can´t capture video (I'v used the 2.03 and 2.13 WDM). When I use the 5x.xx + 2.03 combination the video capture window shows a flickering image. When I use the 5x.xx + 2.13 combination the video capture windows shows nothing and a message tell me that the capture device coudn't be opened. When i install the 44.03 drivers (from the MSI CD and the 2.03 WDM everything is fine). I've made clean installs, upgrades, etc.
System
ASUS P4S533 Motherboard
Pentium 4 2.0 Ghz.
768Mb Kingston PC2700 DDR RAM
2x Maxtor 80 Gb 7200 RPM ATA 133
1 x Combo Unit LG-4480b (CD-RW + DVD player)
1x Optorite DD0203 DVD Multiformat Burner
SoundBlaster Live 5.1!
MSI FX5200 VTD-128 Video Card

If it works with the original drivers and not the newer ones then why are you updating them at all? There wouldn't seem to be an apparent benefit in updating...in other words, "If it ain't broke, don't fix it!"
Bonz

Problems compiling at91 driver for samutils-0.2.1

Hello All!
I'm having problems compiling the usb driver for sam7 tools. I am receiving the following errors:
make -C /lib/modules/2.6.39-ARCH/build SUBDIRS=/home/bailey/Source/sam7utils-0.2.1/driver modules
make[1]: Entering directory `/usr/src/linux-2.6.39-ARCH'
CC [M] /home/bailey/Source/sam7utils-0.2.1/driver/at91.o
/home/bailey/Source/sam7utils-0.2.1/driver/at91.c: In function âat91_write_bulk_callbackâ:
/home/bailey/Source/sam7utils-0.2.1/driver/at91.c:154:2: error: implicit declaration of function âusb_buffer_freeâ [-Werror=implicit-function-declaration]
/home/bailey/Source/sam7utils-0.2.1/driver/at91.c:140:19: warning: variable âdevâ set but not used [-Wunused-but-set-variable]
/home/bailey/Source/sam7utils-0.2.1/driver/at91.c: In function âat91_writeâ:
/home/bailey/Source/sam7utils-0.2.1/driver/at91.c:178:2: error: implicit declaration of function âusb_buffer_allocâ [-Werror=implicit-function-declaration]
/home/bailey/Source/sam7utils-0.2.1/driver/at91.c:178:6: warning: assignment makes pointer from integer without a cast [enabled by default]
/home/bailey/Source/sam7utils-0.2.1/driver/at91.c:192:6: warning: passing argument 6 of âusb_fill_bulk_urbâ from incompatible pointer type [enabled by default]
include/linux/usb.h:1266:20: note: expected âusb_complete_tâ but argument is of type âvoid (*)(struct urb *, struct pt_regs *)â
/home/bailey/Source/sam7utils-0.2.1/driver/at91.c: In function âat91_probeâ:
/home/bailey/Source/sam7utils-0.2.1/driver/at91.c:305:2: error: implicit declaration of function âinfoâ [-Werror=implicit-function-declaration]
/home/bailey/Source/sam7utils-0.2.1/driver/at91.c: In function âat91_disconnectâ:
/home/bailey/Source/sam7utils-0.2.1/driver/at91.c:320:2: error: implicit declaration of function âlock_kernelâ [-Werror=implicit-function-declaration]
/home/bailey/Source/sam7utils-0.2.1/driver/at91.c:328:2: error: implicit declaration of function âunlock_kernelâ [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[2]: *** [/home/bailey/Source/sam7utils-0.2.1/driver/at91.o] Error 1
make[1]: *** [_module_/home/bailey/Source/sam7utils-0.2.1/driver] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.39-ARCH'
make: *** [default] Error 2
output of uname -a
2.6.39-ARCH #1 SMP PREEMPT Mon Jun 27 22:01:13 CEST 2011 i686 Intel(R) Pentium(R) 4 CPU 1.50GHz GenuineIntel GNU/Linux
I am running gcc 4.6.1-1 and have installed kernel26headers. If there is any info I'm missing plz let me know.
Thanks for your help in advance

Thank you for the reply, I noticed that the post below (its for Ubuntu) shows the gcc version to be 4.0.3
[link]http://www.makingthings.com/documentati … -sam7utils[/link]
I poked around the Makefile in /usr/src/linux-2.6.39 and got rid of "-Wall" and "-Wno-implicit-function-declaration"
it compiled with the following warnings:
make[1]: Entering directory `/usr/src/linux-2.6.39-ARCH'
Building modules, stage 2.
MODPOST 1 modules
WARNING: "info" [/home/bailey/Source/sam7utils-0.2.1/driver/at91.ko] undefined!
WARNING: "unlock_kernel" [/home/bailey/Source/sam7utils-0.2.1/driver/at91.ko] undefined!
WARNING: "lock_kernel" [/home/bailey/Source/sam7utils-0.2.1/driver/at91.ko] undefined!
WARNING: "usb_buffer_alloc" [/home/bailey/Source/sam7utils-0.2.1/driver/at91.ko] undefined!
WARNING: "usb_buffer_free" [/home/bailey/Source/sam7utils-0.2.1/driver/at91.ko] undefined!
CC /home/bailey/Source/sam7utils-0.2.1/driver/at91.mod.o
LD [M] /home/bailey/Source/sam7utils-0.2.1/driver/at91.ko
make[1]: Leaving directory `/usr/src/linux-2.6.39-ARCH'
but when I tried to install, the output was
insmod: error inserting 'at91.ko': -1 Unknown symbol in module
Unfortunately, I tried grabbing the package from the AUR, but I ran into the same issues. Seems the only common factor in this process is gcc.
Thanks for the help

Has anyone else had optical sound output problems since the last Apple software update?

I have just read an article about this problem and it seems that there is an issue with the last software update from Apple which has caused problems with the optical sound driver.
My optical output stopped working a couple of weeks back which would probably coincide with the last update that was installed. Still have a red light at the end of the cable but no sound is transmitted.

here's a thread with a possible solution.
https://community.verizonwireless.com/thread/790883
if clearing the system cache doesn't work, a factory reset should (just back up anything you don't want to lose).

How to set the oracle oci8 driver?

hello all:
I've set up the oracle thin driver and it works. but when I change to
oci8.it don't work
below is config and errors:
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
Could not load 'oracle.jdbc.driver.OracleDriver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection
ectionEnvFactory.java:208)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource
ectionEnvFactory.java:131)
at weblogic.common.internal.ResourceAllocator.makeResources(Resource
ator.java:698)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocat
va:282)
best regards

Hello, Jenny I am glad you found your resolution. I too am having problems isung
the oracle 0CI8 driver. My connection pool is creating fine, but my server is
crashing with JVM errors.
Here are my configurations.
DBase=Oracle 8.1.7,OS=Win2000, running 6.1 with Portal 4.0
pool config =
<JDBCConnectionPool CapacityIncrement="0"
DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="5"
MaxCapacity="5" Name="ccConPool"
Properties="jdbc.url=jdbc:oracle:oci8:@servername:1521:orcl;user=XXXXX;password=XXXXXX;dll=ocijdbc8;server=orcl;protocol=oci8;dll=ocijdbc8;protocol=oci8"
RefreshMinutes="0" Targets="portalServer"
TestTableName="WIP_TABLE" URL="jdbc:oracle:oci8:@servername"/>
My classpath sets my classes12.zip file first. My path sets %WEBLOGIC_HOME%\bin\oci817_8
and %WLCS_ORACLE_HOME%\bin.
Am I setting the right dll and protocol in my .dll? Where can I find documentation
on these properties definitions?
"jenny" <[email protected]> wrote:
hello all:
I've got the answer. those all because weblogic.jar. this jar include
the
class "oracle.jdbc.driver.OracleDriver".
although I put the classes12.zip into the CLASSPATH.but the weblogic.jar
in
front of classes12.zip.so classloader
load the class from weblogic.jar. so I can use thin driver(weblogic
implements this function with class,but not for oci8 )
..this is really a big pitfall !
put the classes12.zip in front of weblogic.jar .all perfect!
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello all:
below is some chapters of my config.xml and startWeblogic.cmd
the oci8 :
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool" Password="{3DES}J3XuQd6cvvw="
Properties="user=yanji;password=yanji;dll=ocijdbc8;protocol=oci8"
Targets="myserver" TestTableName="test"
URL="jdbc:oracle:oci8:@pg01"/>
the thin :
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="citcpool" Password="{3DES}J3XuQd6cvvw="
Properties="user=yanji;password=yanji"
SupportsLocalTransaction="true" Targets="myserver"
URL="jdbc:oracle:thin:@sune250:1521:pg01"/>
:runWebLogic
echo on
set ORACLE_HOME=e:\oracle
set PATH=./bin;%ORACLE_HOME%\bin;%ORACLE_HOME%\lib;%PATH%
set
CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;.\lib\dom.jar;.\lib\xml
4j.jar;.\lib\jecf.jar;%ORACLE_HOME%\jdbc\lib\classes12.zip
echo off
the thin driver is ok,but the oci driver can not work!
if I've set the wrong CLASSPATH or PATH , the thin driver and oci8driver
must have not worked. I confused!
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]...
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]...
Its not CLASS_PATH it should be CLASSPATH.
when you say oracle\bin and oracle\lib , on what driver is the oracle
folder?I meant to say 'on what drive' not 'on what driver'
you have to specify the full path.
post your startup script here.
sree
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello all:
I've set the ORACLE_HOME,and CLASS_PATH,but nothing changed. I will
go
to
crazy!!!
when startup the weblogic,I've seen the oracle\bin and oracle\libin th
"path" and classes12.zip in the CLASS_PATH.but the errors stillappears!!
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]...
1. Dont copy this file oci8jdbc.dll, to bin folder. Make sure
you
place
<oracle_home>\lib in your PATH before starting the server. Make
sure
your
ORACLE_HOME environment varable is set to <oracle_home> folder.
eg. set ORACLE_HOME=c:\ora816 before starting the server.
so you must have done something like
set ORACLE_HOME=c:\ora816
set PATH=%ORACLE_HOME%\bin;%ORACLE_HOME%\lib;%PATH%
2. double check if you set your CLASSPATH something like this,
CLASSPATH=%ORACLE_HOME%\jdbc\lib\classes12.zip;%CLASSPATH%
in the server startup script just before starting the server.
3. start the server the connection pool should work.
hth
sree
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello All:
I've edited the StartWeblogic.cmd, set the classes.zip into CLASSPATH,and
copied the oci8jdbc.dll to the bea\wlserver6.1\bin. errors stillappears!
my weblogic version is 6.1 and oracle is 8.1.6 .
why the thin driver is ok but the oci driver can not work?
I logined in the oracle website and look for the jdbc.but I find
that
jdbc
all provide for jdk1.2 or jdk1.1. because the weblogic6.1 based
jdk1.3.
I
think i can not use those drivers.
I think my oracle driver is ok,because i installed the jboss and
bas4.5
in
my computer. they all can use oci8 driver properly.and they all
based
jdk1.3.
by the way. I 've tryed added the oracle\bin path inStartWeblogic.cmd,
nothing changed !
again below is my config : I want to know whether my config right?
(the property DLL and Protocal auto added by the weblogic)
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji;dll=ocijdbc8;protocol=oci8"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
best regards
----- Original Message -----
From: "Mitesh Patel" <[email protected]>
Newsgroups: weblogic.developer.interest.jdbc
Sent: Thursday, December 13, 2001 4:00 AM
Subject: Re: how to set the oracle oci8 driver?
To use oracle oci8 driver:
You should have classes12.zip in weblogic classpath.
You should have ocijdbc8.dll in your weblogic path..
You can download ocijdbc8.dll from oracle website.
Mitesh Patel
jenny wrote:
hello all:
I've set up the oracle thin driver and it works. but when I
change
to
oci8.it don't work
below is config and errors:
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
Could not load 'oracle.jdbc.driver.OracleDriver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
atweblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection
ectionEnvFactory.java:208)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.createResource
ectionEnvFactory.java:131)
atweblogic.common.internal.ResourceAllocator.makeResources(Resource
ator.java:698)
atweblogic.common.internal.ResourceAllocator.<init>(ResourceAllocat
va:282)
best regards
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello all:
I've set up the oracle thin driver and it works. but when I change
to
oci8.it don't work
below is config and errors:
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
Could not load 'oracle.jdbc.driver.OracleDriver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
atweblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection
ectionEnvFactory.java:208)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.createResource
ectionEnvFactory.java:131)
atweblogic.common.internal.ResourceAllocator.makeResources(Resource
ator.java:698)
atweblogic.common.internal.ResourceAllocator.<init>(ResourceAllocat
va:282)
best regards

Problem compiling the Ralink 5390 driver

Similar Messages

Maybe you are looking for