Problem concerning an automatic renaming on desktop

Hi,
I have a problem concerning my desktop.
Each time I copy a file on the desktop, it is instantly renammed.
A little time ago, i used automator to rename serial and the last sequence i renamed was Fringe.
Now each time i copy a file on the desktop it is renamed "Fringe" but the point is that i do not do anything to have it renamed....
Any suggestion?
Thanks a lot.

I just found the solution by searching how to correct it!
I just had to delete the automator workflow into ~/Library/Workflows/Applications/Folder Actions/
Thank you very much for your help!

Similar Messages

  • Lync 2013 I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second Anybody out there having similar problems with call pickup Groups?

    HI
    I have a strange problem concerning  group call pickup  in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having  about 5-7 second
    Anybody out there having similar problems with call pickup Groups?

    Hi,
    Did you meet any other call delay when you using Lync?
    As the issue happen for Lync desktop client, it can be performance issue. Please check if there is any error message from FE Server when the issue happen.
    Also please check if you have updated Lync Server to the latest version, if not, update it and then test again.
    Best Regards,
    Eason Huang  
    Eason Huang
    TechNet Community Support

  • How can I stop iTunes automatically renaming tracks incorrectly as soon as they are played?

    iTunes has started renaming some tracks as soon as I play them. It completely changes all the info to a totally different cd. The only way I can change it is to manually change everything back and as I have more than 30000 tracks I don't fancy having to play every single one to see whether iTunes is going to change it to something I have never heard of. Can this automatic renaming be stopped?

    Could it be something with iTunes-Match/iCloud ??
    I've had problems getting "Hide items in the Cloud" and iCloud tick-boxes in View Options to stick.
    An occaisional glance at similar topics on these forums seems to indicate that people are having all sorts of funnies. So, I have severed iTunes from the net (I have Little Snitch) and will wait until things clear up before letting iTunes out of it's kennel again.

  • Automatically Renaming Songs

    My iTunes automatically renames songs for me. For example, I just imported a new CD yesterday. I renamed the tracks from Track 01 (etc) to the names listed on the CD case. But when I click on them to play or change more information, the names change back to Track 01, etc. Can anyone help me stop iTunes from doing this?
    Message was edited by: Sysofadwn06

    hmmm...yeah, that's a problem because I don't know how to strip the tags off of them.
    Try this: simply convert one of the songs to mp3, this is just to see if it works. Go to edit > preferences > advanced > importing and set it to mp3. Right-Click on the song and "Convert Selection To MP3". This will create duplicates of those songs (one in AAC and MP3), and see if the MP3s can retain the information.
    NOTE: these MP3s have degraded sound quality because you've made a copy of a copy, though some people can't detect the quality loss. Anyway, this is just to see if it works.
    If it still doesn't work, then strip them of their ID3 tags as I relayed above. Then try to see if they can retain the info this time.

  • Stop finder window from automatically opening at desktop

    Everytime I drag something to my desktop, whether it be a photo or a link, it automatically opens the Desktop finder window.  I have not changed any settings, it randomly started happening.

    I have the same problem, and it's not only with the desktop, if I drag something to any folder on my desktop or folder on sidebar, that folder opens a new window. Now I recently upgraded both Chrome and itunes. It's not a big issue, but sometimes it's annoying.

  • ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate

    ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate a form.
    1) Created a FORM on EMP using the wizards. This creates an AUTOMATIC ROW FETCH
    TABLE NAME - EMP
    Item Containing PRIMARY KEY - P2099_EMPNO
    Primary key column - EMPNO
    By default the automatic fetch has a ‘Process Error Message’ of ‘Unable to fetch row.’
    2) Created a HTML region. Within this region add
    text item P2099_FIND_EMPNO
    Button GET_EMP to submit
    Branch Modified the conditional branch created during button creation to set P2099_EMPNO with &P2099_FIND_EMPNO.
    If I then run the page, enter an existing employee number into P2099_EMPNO and press the GET_EMP button the form is populated correctly. But if I enter an employee that does not exist then I get the oracle error ORA-01403: no data found and no form displayed but a message at the top of the page ‘Action Processed’.I was expecting a blank form to be displayed with the message ‘Unable to fetch row.’
    I can work around this by making the automated fetch conditional so that it checks the row exists first. Modify the Fetch row from EMP automated fetch so that it is conditional
    EXIST (SQL query returns at least one row)
    select 'x'
    from EMP
    where EMPNO = :P2099_EMPNO
    But this means that when the employee exists I must be fetching from the DB twice, once for the condition and then again for the actual row fetch.
    Rather than the above work around is there something I can change so I don’t get the Oracle error? I’m now wondering if the automatic row fetch is only supposed to be used when linking a report to a form and that I should be writing the fetch process manually. The reason I haven’t at the moment is I’m trying to stick with the automatic wizard generation as much as I can.
    Any ideas?
    Thanks Pete

    Hi Mike,
    I've tried doing that but it doesn't seem to make any difference. If I turn debug on it shows below.
    0.05: Computation point: AFTER_HEADER
    0.05: Processing point: AFTER_HEADER
    0.05: ...Process "Fetch Row from EMP": DML_FETCH_ROW (AFTER_HEADER) F|#OWNER#:EMP:P2099_EMPNO:EMPNO
    0.05: Show ERROR page...
    0.05: Performing rollback...
    0.05: Processing point: AFTER_ERROR_HEADER
    I don't really wan't the error page, either nothing with the form not being populated or a message at the top of the page.
    Thanks Pete

  • Hi, the problem of deleting files / videos seeds desktop to go into Terminal and then sudo rm-rf ~ /. Trash Pohangina the answers I've had e of someone in her forum but when I write procedures line in Terminal as the Krever my password and it can not writ

    Hi, the problem of deleting files / videos seeds desktop to go into Terminal and then sudo rm-rf ~ /. Trash Pohangina the answers I've had e of someone in her forum but when I write procedures line in Terminal as the Krever my password and it can not write anything there, I write but nothing comes and my problem is not löst.När I want to delete the movie / video image Frin desktop still arrive Finder wants to make changes.Type your password to allow this. But even that I type my password file / video is left I need help in an easier way or another set-even those on the terminal that I can not type my password to solve the problem Regards Toni

    If you want to preserve the data on the boot drive, you must try to back up now, before you do anything else.
    There are several ways to back up a Mac that isn't fully working. You need an external hard drive to hold the backup data.
    1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • Hi, I have a Power Book G4 Tiger 10.4.11 and my problem concerns iTunes 9.2.1(5). I have changed my Apple ID and password recently. Since that, I am told when I try to buy something in iTunes Store that my "session has expired". Where does this come from?

    Hi, I have a Power Book G4 Tiger 10.4.11 and my problem concerns iTunes 9.2.1(5). I have changed my Apple ID and password recently. Since that, I am told, only when I try to buy something in iTunes Store, that my "session has expired". Where does this come from? What should I do to solve this problem ? I would greatly appreciate your help. Thank you in advance.

    Hi, I am khonthaï. I solved the problem thanks to JHdeVilliers's post on 4 Dec. 2011: I removed all cookies in Safari and it worked immediately !!!

  • HT1414 how can i open my iphone because when i try to restore it from my back up all the files it didn't open anymore & always my iphone have a problem that it automatically shut down then the itunes logo appear then i need it to connect to itunes then re

    how can i open my iphone because when i try to restore it from my back up all the files it didn't open anymore & always my iphone have a problem that it automatically shut down then the itunes logo appear then i need it to connect to itunes then restore to enable to open it..what should i do?i cannot bring it to the smart center because i lost my receipt..is there any chance to recover it?thank you so much..i already update my operating system to ios 6.1.3 but when i recover my  back up the operating system was ios 6.1.2..

    Your phone is in recovery mode. Did you plug it to the computer running itunes? What happend?

  • How can i change the settings so that before download the firefox gives a propmt that same file name already exists, instead of automatically renaming duplicate files by adding .1 suffix?

    When I download a file, if a file of similar name already exists in the same download folder, the firefox downloads the file and renames it by adding numeric .1 to the file name.
    I want the firebox to give me a prompt that similar file already exist, rather than automatically renaming it by adding suffix .1.

    Downloads Options
    * https://support.mozilla.com/en-US/kb/Options%20window%20-%20General%20panel#w_downloads
    Unable to Download or Save files
    * https://support.mozilla.com/en-US/kb/Unable%20to%20download%20or%20save%20files
    Check and tell if its working.

  • Is there a way to rename multiple desktops that have been created?

    Is there a way to rename multiple desktops that have been created?

    No, They'll be Desktop 1, Desktop 2 etc or the name of any full screen apps.

  • Problem in multilevel automatic packing

    Dear All,
    I am facing problem in Multilevel Automatic Packing of materials. I have done settings of the packing transaction profile; define check profile for packing status and of packing instruction determination in customizing. I am able to packing material upto 1 level only.
    I have already created packing instruction using T-code POP1 and also created subordinate packing instruction for packing handling units in next level, assigned this to packing determination record using T-code POF1. I have used 1st packing material as main material in next packing instruction and the larger size material as next handling unit. The settings are:
    POP1
    PI 1
    P 214 Target Qty 1
    M 22   Target Qty 1
    I  5     Target Qty 2
    PI 5
    P 215 Target Qty 1
    M 214 Target QTY 2
    POF1
    Determination record ABCD
    Material 22 PI 1
    I also tried different condition type for this process but didnt succeed
    I am not getting any error, just receive a message Handling units were created. But when I try to pack handling units using automatic packing option then system prompts me msg that there are no items to be packed.
    Kindly give me solution.
    Regards,
    Anand Malu
    Jr. SAP SD Consultant

    Hi,
    I want to pack 1 medicine box in 1 small carton and then 10 small cartons in 1 Large Carton. I am able to pack 1 medicine box in 1 small carton thru automatic packing but not able to pack 10 small cartons in 1 Large carton. For this I have maintained packing instructions which are:
    Packing instruction 4
    Item no.   Item Cat.   Component   Tgt qty   Min qty   Round qty  unit of measure Load carr MixID
    10             P             214                 1               0           0                 Carton            Yes        No
    20             M            22                   1               1           0                  Box                No         Yes
    30             I              5(Pack instr)    20             0           0                  -
    If I maintain Min. qty 1 for item no. 30 then I get error while packing "Min. qty from packing instruction not reached packing not possible"
    Packing Instruction 5
    10            P              215                1              ---             --              Carton               Yes        No
    20            M             214                20              ---            --               Carton               No         Yes
    Packing Instruction determination records
    Determination type   ABCD
    Material                         Packing Instruction
    22                                 4 
    Packing determination procedure contains determination type ABCD only.
    Regards,
    Anand Malu
    Jr. SAP SD Consultant
    Edited by: genius_anand on May 2, 2009 8:38 AM

  • Automatically renaming an uploaded file

    I am creating a page to upload files, as well as to submit
    data about the file to be stored in a database. When the form data
    is submitted, how can I program it to automatically rename the
    uploaded file to the ID or Key number of the row in the database in
    which the file's information is stored?

    What scripting language are you using?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "AngryCloud" <[email protected]> wrote in
    message
    news:evmlp4$lfh$[email protected]..
    >I am creating a page to upload files, as well as to
    submit data about the
    >file
    > to be stored in a database. When the form data is
    submitted, how can I
    > program
    > it to automatically rename the uploaded file to the ID
    or Key number of
    > the row
    > in the database in which the file's information is
    stored?
    >

  • HT1338 problems with time  machine and parallels desktop,  mac osx mountain lion 10.8

    have a good day, i have been problems with time  machine and parallels desktop, dont work in mac osx 10.8, i upgrate two mac´s (macbook air, imac), in the two machines shows problems, could you help me please.
    two machines have good ram memory (macbook air 11.1 2010 early , imac 2009 late).
    i am waiting for your help.
    thanks.
    Jesus.

    Take a look here:
    http://pondini.org/TM/Troubleshooting.html
    Specifically, you'll probably want to try item #A5 on that page, but there's a lot of other info there that may be useful.

  • Problems concerning Agilent 89410A programming

    Hey!
    I have a problem concerning Agilent 89410A signal analyzer programming.
    The timeout error (-1073807339) and bundle error (-1074003951) pop up during the "Initialize.vi" execution. The time out error exist in the VISA Read part of the VI.
    "The given session or object reference is invalid" error (-1073807346) pops up during "Application.vi" and "Close.vi" executions.
    Agilent´s "analyzer address" is set to 16" Should I set something else to specific value?
    What to do? I need a piece advice!
    (please, step by step)

    Hi,
    The -1073807346 error shows that you may be using the wrong resource descriptor.
    The first thing you need to do is determine if you are able to communicate with the instrument. Connec the instrument to the GPIB board and power on. In MAX, select "Scan for Instruments". If the instrument is detected (with the ID string) it means that the GPIB communication is working.
    Next, open a interactive VISA session. In MAX right-click on the instrument entry and select "Open VISA session". The interactive VISA control will open. Click on the Basic I/O and see if you can perform a Basic read nad write. The control uses the exact same functions used by the instrument driver. If it work, then you'll need to look at your VI.
    Use the instrument driver Ge
    tting Started VI and see if you can run it. Make sure you are using the right resource descriptor. The resource descriptor should be GPIB::. id is the number that shows up in MAX for the different GPIB interfaces (GPIB0, GPIB1, etc).
    Finally, if it doesn't work, troubleshoot the driver using LabVIEW's debugging facilities, such as highlight execution and NI Spy.
    NI-Spy toturial
    DiegoF
    National Instruments

Maybe you are looking for