Problem configuring Desktop PC as RT target

Hi all,
Following the steps in help I have used a hub to connect a desktop PC and another desktop PC as RT target on a standalone network.
In MAX the RT target PC shows up as 0.0.0.0.
But the problem is that when I choose to manually configure the IP address, and press apply settings, the target reboots but it remains unconfigured.
name : unspecified.
IP 0.0.0.0
unconfigured.
My host PC IP address : 169.254.119.180
subnet mask : 255.255.0.0
Gateway: 169.254.119.180
I have set RTtarget PC fields as:
IP address : 169.254.119.2
subnet mask : 255.255.0.0
Gateway: 169.254.119.180
and few other combinations of gateway as 169.254.119.2
and another as IP address : 169.254.0.2
but still It remains unconfigured.
I can see MAC address and the RTtarget PC is recognised, but is unconfigurabel.
Please suggest options to try.
Regards
Shradha
Solved!
Go to Solution.

Hi Shradha,
Good news! We have definitely found the problem.
The solution depends on whether you would like to use your real-time target computer with Windows XP, or whether you would like to convert it permanently to run LabVIEW Real-Time only.
1) If you want to convert your target PC to run LabVIEW Real-Time only, then create a Desktop PC Format Hard Drive Disk in Measurement and Automation Explorer, and follow the prompts to format your drive to FAT32 and replace the boot sector (this way you will not need to use a boot disk each time).
2) If you want to still use your target PC for Windows XP but just boot into LabVIEW Real-Time once in a while, I would recommend using a utility like Easeus Partition Manager or Partition Magic to repartition your hard drive (make the NTFS partition smaller and create a FAT32 partition alongside it). Make sure that the FAT32 partition that you create is primary. After you do these things you should be able to use your current LabVIEW Real-Time boot disk, and the new FAT32 partition will automatically be used.
Ultimately, once you have a FAT32 partition your IP address settings will be able to be saved, which means that you should not see the problem that you are running into now. Have a great day Shradha!
Best Regards,
Casey Weltzin
Product Manager, LabVIEW Real-Time
National Instruments

Similar Messages

Problems configuring HP Laserjet M1213nf MFP with Mac via AirPrint

Hello,
I have a HP Laserjet M1213nf MFP printer, connected to a Dlink DSL-2730U ADSL router. I am having problems configuring the printer with my Macbook running OSX Yosemite. I can see the printers name in nearby printers but when I try to add the printer, the mac gives me an error saying, "unable to communicate with the printer at this time". The network settings on the printer are configure for iPv4 and iPv6 addresses.
Previously, I had the ADSL DSL-2750U model router, and the printer was connected fine. I did not face any issues then. I have been facing problems since I changed my router so the problem should be in the router. I have the IP for the printer reserved in the DHCP reservation list on the router settings using the mac address of the printer.
Can someone please help me out here? Is there something I am probably missing.
Rgds
~n~

I talked to the DLink Support. They asked me to disable an option called "MultiAP Isolation" and Voila, the printer is working fine. I can add it to all my devices on the wireless network. I looked up google. Apparently, this isolation feature present in some routers, prevent wifi clients to interact with other devices connected to the wired network and also with each other. Thats why only my desktop which was also connected wired was only able to access the printer and not the laptops connected wirelessly.
Problem solved. Thanks for all your help on this one.
Cheers!

Problems configuring Platform Domain with MS Sql Server

Hi,
We are having problems configuring a Platform Domain with MS Sql Server 2000.
We are using Weblogic version 7.0.0.2. These are the steps we followed
1.We manually created a database called TestDB and created a user account called
"system", pwd ==>> "weblogic" in SQL server and assigned him as the DB owner for
the TestDB created.
2. Changed dbsettings_properties files (Commented pointbase entries and uncommented
SQL Server entries. I gave the connection parameter as connection=jdbc:weblogic:mssqlserver4:localhost:1433
in this file.
3. Modified Config.xml and changed properties for DataSyncPool, WLIPool, CommercePool,WLIPool
and modified the RDBMS realm properties to point to the database.
4. ran the create_db script and it seemed to have run fine looking at the log
file.
5. I then tried to start the BEA Server instance and I get the following error.
I am also attaching the config.xml file for reference.
Appreciate any help/suggestions. Thanks in Advance.
Vikram
<Apr 9, 2003 2:57:45 AM EDT> <Error> <RDBMSRealm> <000000> <An error occured cre
ating a database connection for the realm.
java.sql.SQLException: Invalid port: weblogic:mssqlserver4:localhost:1433
at weblogic.jdbc.mssqlserver4.ConnectionInfo.<init>(ConnectionInfo.java:
193)
at weblogic.jdbc.mssqlserver4.ConnectDriver.parse(ConnectDriver.java:333
at weblogic.jdbc.mssqlserver4.ConnectDriver.connect(ConnectDriver.java:1
02)
at com.bea.p13n.security.realm.RDBMSDelegate.<init>(RDBMSDelegate.java:1
69)
at com.bea.p13n.security.realm.RDBMSDelegate$DFactory.getInstance(RDBMSD
elegate.java:962)
at com.bea.p13n.security.realm.internal.Pool.<init>(Pool.java:53)
at com.bea.p13n.security.realm.RDBMSRealm.createPool(RDBMSRealm.java:153
at com.bea.p13n.security.realm.RDBMSRealm.<init>(RDBMSRealm.java:140)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:232)
at weblogic.security.acl.Realm.getRealm(Realm.java:87)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
<Apr 9, 2003 2:57:45 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
in
itialize the server: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
[config.xml]

Try removing the server section from the SchemaProperties line.
Preferrably do not use localhost or hostnames in the server
configuration file.
<RDBMSRealm
Name="wlcsRealm"
DatabaseDriver="weblogic.jdbc.mssqlserver4.Driver"
DatabasePassword="weblogic"
DatabaseURL="jdbc:weblogic:mssqlserver4:yourIPAddress:1433"
RealmClassName="com.bea.p13n.security.realm.RDBMSRealm"
SchemaProperties="user=system;password=weblogic"/>
Also consider ...
If you have a new Portal database created in SQL Server?
Does the user system have the Portal database as his default database?
-- Jim
Vikram wrote:
Hi,
We are having problems configuring a Platform Domain with MS Sql Server 2000.
We are using Weblogic version 7.0.0.2. These are the steps we followed
1.We manually created a database called TestDB and created a user account called
"system", pwd ==>> "weblogic" in SQL server and assigned him as the DB owner for
the TestDB created.
2. Changed dbsettings_properties files (Commented pointbase entries and uncommented
SQL Server entries. I gave the connection parameter as connection=jdbc:weblogic:mssqlserver4:localhost:1433
in this file.
3. Modified Config.xml and changed properties for DataSyncPool, WLIPool, CommercePool,WLIPool
and modified the RDBMS realm properties to point to the database.
4. ran the create_db script and it seemed to have run fine looking at the log
file.
5. I then tried to start the BEA Server instance and I get the following error.
I am also attaching the config.xml file for reference.
Appreciate any help/suggestions. Thanks in Advance.
Vikram
<Apr 9, 2003 2:57:45 AM EDT> <Error> <RDBMSRealm> <000000> <An error occured cre
ating a database connection for the realm.
java.sql.SQLException: Invalid port: weblogic:mssqlserver4:localhost:1433
at weblogic.jdbc.mssqlserver4.ConnectionInfo.<init>(ConnectionInfo.java:
193)
at weblogic.jdbc.mssqlserver4.ConnectDriver.parse(ConnectDriver.java:333
at weblogic.jdbc.mssqlserver4.ConnectDriver.connect(ConnectDriver.java:1
02)
at com.bea.p13n.security.realm.RDBMSDelegate.<init>(RDBMSDelegate.java:1
69)
at com.bea.p13n.security.realm.RDBMSDelegate$DFactory.getInstance(RDBMSD
elegate.java:962)
at com.bea.p13n.security.realm.internal.Pool.<init>(Pool.java:53)
at com.bea.p13n.security.realm.RDBMSRealm.createPool(RDBMSRealm.java:153
at com.bea.p13n.security.realm.RDBMSRealm.<init>(RDBMSRealm.java:140)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:232)
at weblogic.security.acl.Realm.getRealm(Realm.java:87)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<Apr 9, 2003 2:57:45 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
in
itialize the server: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<Domain Name="epmsDomain">
<Log
FileName="logs/wl-domain.log"
Name="epmsDomain"
/>

<Server
Name="platformServer"
     ListenAddress="localhost"
ListenPort="7501"
NativeIOEnabled="true"
TransactionLogFilePrefix="logs/"
>
<SSL
Name="platformServer"
ListenPort="7502"
Enabled="true"
ServerCertificateChainFileName="ca.pem"
ServerCertificateFileName="democert.pem"
ServerKeyFileName="demokey.pem"
/>
<Log
FileName="logs/weblogic.log"
/>
<WebServer
DefaultWebApp="splashPage"
LogFileName="./logs/access.log"
LoggingEnabled="true"
Name="platformServer"
/>
</Server>

<JDBCConnectionPool
Name="commercePool"
DriverName="weblogic.jdbc.mssqlserver4.Driver"
URL="jdbc:weblogic:mssqlserver4:localhost:1433"
Properties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Password="weblogic"
InitialCapacity="20"
MaxCapacity="20"
CapacityIncrement="1"
RefreshMinutes="0"
ShrinkingEnabled="false"
Targets="platformServer"
TestConnectionsOnReserve="false"
TestTableName="WEBLOGIC_IS_ALIVE"
/>

<JDBCConnectionPool
CapacityIncrement="2"
DriverName="weblogic.jdbc.mssqlserver4.Driver"
InitialCapacity="8"
LoginDelaySeconds="1"
MaxCapacity="36"
Name="wliPool"
Properties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Password="weblogic"
RefreshMinutes="0"
ShrinkPeriodMinutes="15"
ShrinkingEnabled="true"
Targets="platformServer"
URL="jdbc:weblogic:mssqlserver4:localhost:1433"
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="false"
JNDIName="weblogic.jdbc.jts.commercePool"
Name="commercePool"
PoolName="commercePool"
Targets="platformServer"
/>
<JDBCDataSource
JNDIName="weblogic.jdbc.pool.commercePool"
Name="commercePool"
PoolName="commercePool"
Targets="platformServer"
/>
<JDBCDataSource
JNDIName="WLAI_DataSource"
Name="WLAI_DataSource"
PoolName="wliPool"
Targets="platformServer"
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="true"
JNDIName="com.bea.wlpi.TXDataSource"
Name="TXDataSource"
PoolName="wliPool"
Targets="platformServer"
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="true"
JNDIName="WLCHub.DS"
Name="WLCHub.DS"
PoolName="wliPool"
Targets="platformServer"/>
/>

<JDBCTxDataSource
     EnableTwoPhaseCommit="true"
JNDIName="cgDataSource"
Name="cgDataSource"
PoolName="commercePool"
Targets="platformServer"/>
<JDBCTxDataSource
EnableTwoPhaseCommit="true"
JNDIName="cgSampleDataSource"
Name="cgSampleDataSource"
PoolName="commercePool"
Targets="platformServer"/>
<JMSConnectionFactory JNDIName="weblogic.jws.jms.QueueConnectionFactory"
Name="cgQueue" Targets="platformServer"/>
<JMSJDBCStore ConnectionPool="commercePool" Name="cgJDBCStore" PrefixName="WEBLOGIC"/>
<JMSServer Name="cgJMSServer" Store="cgJDBCStore" Targets="platformServer">
<JMSQueue JNDIName="jws.queue" Name="cgJWSQueue" StoreEnabled="default"/>
</JMSServer>
<JTA Name="epmsDomain" TimeoutSeconds="3600"/>


<JDBCConnectionPool
Name="dataSyncPool"
DriverName="weblogic.jdbc.mssqlserver4.Driver"
URL="jdbc:weblogic:mssqlserver4:localhost:1433"
Properties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Password="WEBLOGIC"
InitialCapacity="1"
MaxCapacity="5"
CapacityIncrement="1"
RefreshMinutes="0"
ShrinkingEnabled="false"
TestConnectionsOnReserve="false"
TestTableName="WEBLOGIC_IS_ALIVE"
Targets="platformServer"/>
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="false"
JNDIName="weblogic.jdbc.jts.dataSyncPool"
Name="dataSyncPool"
PoolName="dataSyncPool"
Targets="platformServer"/>
/>

<Security
GuestDisabled="false"
Name="epmsDomain"
PasswordPolicy="wl_default_password_policy"
Realm="wl_default_realm"
CompatibilityMode="true"
/>
<PasswordPolicy
Name="wl_default_password_policy"
/>
<Realm
Name="wl_default_realm"
CachingRealm="wlcsCachingRealm"
FileRealm="wl_default_file_realm"
/>
<CachingRealm
BasicRealm="wlcsRealm"
CacheCaseSensitive="true"
Name="wlcsCachingRealm"
/>
<RDBMSRealm DatabaseDriver="weblogic.jdbc.mssqlserver4.Driver"
DatabasePassword="weblogic"
DatabaseURL="jdbc:weblogic:mssqlserver4:localhost:1433"
SchemaProperties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Name="wlcsRealm"
RealmClassName="com.bea.p13n.security.realm.RDBMSRealm"/>
<FileRealm
Name="wl_default_file_realm"
/>
<StartupClass
ClassName="com.beasys.commerce.ebusiness.security.KeyBootstrap"
FailureIsFatal="false"
Name="KeyBootstrap"
Targets="platformServer"
/>

<JMSConnectionFactory Name="WLI_B2B_TopicFactory"
JNDIName="com.bea.wli.b2b.server.TopicConnectionFactory"
AllowCloseInOnMessage="true"
UserTransactionsEnabled="true"
Targets="platformServer"
/>
<JMSConnectionFactory
AllowCloseInOnMessage="true"
JNDIName="com.bea.wli.b2b.rosettanet.QueueConnectionFactory"
Name="RNQueueFactory"
Targets="platformServer"
UserTransactionsEnabled="true"
/>
<JMSConnectionFactory
AllowCloseInOnMessage="false"
DefaultDeliveryMode="Persistent"
DefaultPriority="4"
DefaultTimeToLive="0"
JNDIName="com.bea.wlai.JMSConnectionFactory"
MessagesMaximum="10"
Name="WLAI_JMSConnectionFactory"
OverrunPolicy="KeepOld"
UserTransactionsEnabled="true"
Targets="platformServer"/>
/>
<JMSConnectionFactory
AllowCloseInOnMessage="true"
JNDIName="com.bea.wlpi.TopicConnectionFactory"
Name="wlpiFactory"
Targets="platformServer"
UserTransactionsEnabled="true"
/>
<JMSConnectionFactory
AllowCloseInOnMessage="true"
JNDIName="com.bea.wlpi.QueueConnectionFactory"
Name="wlpiQueueFactory"
Targets="platformServer"
UserTransactionsEnabled="true"
/>
<JMSJDBCStore
ConnectionPool="wliPool"
Name="JMSWLIStore"
PrefixName="PBPUBLIC"
/>
<JMSServer Name="WLIJMSServer"
Targets="platformServer"
TemporaryTemplate="TemporaryTemplate"
Store="JMSWLIStore">
<JMSTemplate Name="TemporaryTemplate"/>

<JMSQueue Name="WLI_B2B_RNEncoderQueue"
JNDIName="com.bea.wli.b2b.rosettanet.EncoderQueue"/>
<JMSTopic Name="WLI_B2B_Topic"
JNDIName="com.bea.wli.b2b.server.B2BTopic"/>
<JMSQueue Name="WLI_B2B_OutboundQueue"
JNDIName="com.bea.b2b.OutboundQueue"/>

<JMSTopic Name="wlpiEvent"
JNDIName="com.bea.wlpi.EventTopic"/>
<JMSQueue Name="WLI_BPM_Timer"
JNDIName="com.bea.wli.bpm.TimerQueue"
StoreEnabled="true"
Template="WLI_JMSTemplate"/>
<JMSQueue Name="WLI_BPM_Event"
JNDIName="com.bea.wli.bpm.EventQueue"
StoreEnabled="true"
Template="WLI_JMSTemplate"/>
<JMSQueue Name="WLI_BPM_ValidatingEvent"
JNDIName="com.bea.wli.bpm.ValidatingEventQueue"
StoreEnabled="true"
Template="WLI_JMSTemplate"/>
<JMSTopic Name="WLI_BPM_Error"
JNDIName="com.bea.wli.bpm.ErrorTopic"/>
<JMSTopic Name="WLI_BPM_Audit"
JNDIName="com.bea.wli.bpm.AuditTopic"/>
<JMSTopic Name="WLI_BPM_Notify"
JNDIName="com.bea.wli.bpm.NotifyTopic"/>

<JMSQueue Name="WLAI_ASYNC_REQUEST_QUEUE"
JNDIName="com.bea.wlai.ASYNC_REQUEST_QUEUE"/>
<JMSQueue Name="WLAI_ASYNC_RESPONSE_QUEUE"
JNDIName="com.bea.wlai.ASYNC_RESPONSE_QUEUE"/>
<JMSQueue Name="WLAI_EVENT_QUEUE"
JNDIName="com.bea.wlai.EVENT_QUEUE"/>
<JMSTopic Name="WLAI_EVENT_TOPIC"
JNDIName="com.bea.wlai.EVENT_TOPIC"/>
     
     <JMSQueue JNDIName="com.bea.wlai.WORKSHOP_ASYNC_RESPONSE_QUEUE" Name="WLAI_WORKSHOP_ASYNC_RESPONSE_QUEUE"/>
     <JMSQueue JNDIName="com.bea.wlai.WORKSHOP_EVENT_QUEUE" Name="WLAI_WORKSHOP_EVENT_QUEUE"/>

<JMSQueue Name="WLI_FailedEvent"
JNDIName="com.bea.wli.FailedEventQueue"
StoreEnabled="true"/>
<JMSTemplate Name="WLI_JMSTemplate"
ErrorDestination="WLI_FailedEvent"
RedeliveryDelayOverride="60000"
RedeliveryLimit="10"/>
</JMSServer>
<JMSJDBCStore Name="JMSWLIStore"
ConnectionPool="wliPool"
PrefixName="platformServer"/>






<Application
Deployed="true"
Name="taxWSApp"
Path="C:/bea/user_projects/epmsDomain/beaApps/taxWSApp"
TwoPhase="true"
>
<EJBComponent
Name="tax"
URI="tax.jar"
Targets="platformServer"
/>
<WebAppComponent
Name="tax-webservice"
URI="tax-ws"
Targets="platformServer"
/>
</Application>
<Application
Deployed="true"
Name="paymentWSApp"
Path="C:/bea/user_projects/epmsDomain/beaApps/paymentWSApp"
TwoPhase="true"
>
<EJBComponent
Name="payment"
URI="payment.jar"
Targets="platformServer"
/>
<WebAppComponent
Name="payment-edit webservice"
URI="pay-ws"
Targets="platformServer"
/>
</Application>

<Application
Deployed="true"
Name="wlpDocsApp"
Notes=""
Path="C:/bea/weblogic700/portal/lib"
TwoPhase="true"
>
<WebAppComponent
IndexDirectoryEnabled="false"
Name="wlpDocs"
Targets="platformServer"
URI="wlpDocs.war"
ServletReloadCheckSecs="300"
/>
</Application>

<Application
Deployed="true"
Name="portalApp"
Notes=""
Path="C:/bea/user_projects/epmsDomain/beaApps/portalApp"
TwoPhase="true"
>
<ApplicationConfiguration
Name="portalApp"
Targets="platformServer"
URI="META-INF/application-config.xml"
/>
<EJBComponent
Name="events"
Targets="platformServer"
URI="events.jar"
/>
<EJBComponent
Name="pipeline"
Targets="platformServer"
URI="pipeline.jar"
/>
<EJBComponent
Name="property"
Targets="platformServer"
URI="property.jar"
/>
<EJBComponent
Name="rules"
Targets="platformServer"
URI="rules.jar"
/>
<EJBComponent
Name="usermgmt"
Targets="platformServer"
URI="usermgmt.jar"
/>
<EJBComponent
Name="customer"
Targets="platformServer"
URI="customer.jar"
/>
<EJBComponent
Name="ebusiness"
Targets="platformServer"
URI="ebusiness.jar"
/>
<EJBComponent
Name="portal"
Targets="platformServer"
URI="portal.jar"
/>
<EJBComponent
Name="campaign"
Targets="platformServer"
URI="campaign.jar"
/>
<EJBComponent
Name="catalogws"
Targets="platformServer"
URI="catalogws.jar"
/>
<EJBComponent
Name="document"
Targets="platformServer"
URI="document.jar"
/>
<EJBComponent
Name="ejbadvisor"
Targets="platformServer"
URI="ejbadvisor.jar"
/>
<EJBComponent
Name="mail"
Targets="platformServer"
URI="mail.jar"
/>
<EJBComponent
Name="placeholder"
Targets="platformServer"
URI="placeholder.jar"
/>
<WebAppComponent
Name="toolSupport"
Targets="platformServer"
URI="toolSupport"
ServletReloadCheckSecs="300"
/>
<WebAppComponent
Name="tools"
Targets="platformServer"
URI="tools"
ServletReloadCheckSecs="300"
/>
<WebAppComponent
Name="datasync"
Targets="platformServer"
URI="datasync"
ServletReloadCheckSecs="300"
/>
<WebAppComponent
Name="splashPage"
Targets="platformServer"
URI="splashPage"
ServletReloadCheckSecs="300"
/>

</Application>
<Application
Deployed="true"
TwoPhase="true"
StagedTargets="platformServer"
Name="p13nConsoleApp"
Path="C:/bea/weblogic700/portal/lib"
>
<WebAppComponent
Name="p13nConsole"
ServletReloadCheckSecs="300"
Targets="platformServer"
URI="p13nConsole.war"
/>
</Application>

<Application Deployed="true" LoadOrder="900" Name="EAI" Path="C:/bea/weblogic700/samples/workshop/wlai/ear/" TwoPhase="true">
<EJBComponent
DeploymentOrder="100"
Name="repository-ejb.jar"
     Targets="platformServer"
URI="repository-ejb.jar"/>
<EJBComponent Name="WLI-B2B Startup"
DeploymentOrder="200"
Targets="platformServer"
URI="b2b-startup.jar"/>
<EJBComponent DeploymentOrder="300" Name="b2b-rosettanet.jar" Targets="platformServer" URI="b2b-rosettanet.jar"/>
<WebAppComponent DeploymentOrder="400" Name="b2b.war" Targets="platformServer" URI="b2b.war"/>
<WebAppComponent DeploymentOrder="500" Name="b2bconsole.war" Targets="platformServer" URI="b2bconsole.war"/>
<EJBComponent DeploymentOrder="600" Name="WLI-AI Server" Targets="platformServer" URI="wlai-server-ejb.jar"/>
<WebAppComponent DeploymentOrder="700" Name="wlai" Targets="platformServer" URI="wlai.war"/>
<EJBComponent DeploymentOrder="800" Name="WLI-AI Async Processor" Targets="platformServer" URI="wlai-asyncprocessor-ejb.jar"/>
<EJBComponent DeploymentOrder="900" Name="WLI-AI Event Processor" Targets="platformServer" URI="wlai-eventprocessor-ejb.jar"/>
<EJBComponent DeploymentOrder="1000" Name="wlpi-ejb.jar" Targets="platformServer" URI="wlpi-ejb.jar"/>
<EJBComponent DeploymentOrder="1100" Name="wlpi-master-ejb.jar" Targets="platformServer" URI="wlpi-master-ejb.jar"/>
<EJBComponent DeploymentOrder="1200" Name="wlpi-mdb-ejb.jar" Targets="platformServer" URI="wlpi-mdb-ejb.jar"/>
<EJBComponent DeploymentOrder="1300" Name="WLXTEJB.jar" Targets="platformServer" URI="WLXTEJB.jar"/>

How to split one monitor into two, differently configured desktops

Hello,
I have a 27" iMac. I would like to split the screen into two differently configured desktops or monitors. Apps like TwoUp or Divy don't exactly do this. I'll explain it with an example:
Suppose I'm working on a document and I need to open many folders to retrieve files. One common problem is that opened folders overlap each other and sometimes they overlap with the document I'm working on, or they go underneath the document. I would like to split the screen vertically in, say, two virtual, independent desktops/monitors, like this:
- one window/space on one side (say, on the left) of the screen would contain the document from top to bottom, with no dock bar on the bottom
- the other window/space (right) would behave as a regular, full desktop, with the entire dock on the bottom
In this way, if I need to navigate to find a file to use in the document, I would move the cursor to the right. The Finder would work only in this window/space, thus windows or other applications would never overlap or clutter the left side of the screen. Drag-and-drop from right to left should be possible.
One way to imagine it is as if the 16x9 monitor were comprised by two vertical, 8x9 independent monitors side by side, each with its own configuration.
Is this possible? Can anyone recommend an application or type of setup?
Thank you,
-celso

Looking for something like this?
You can tell Display Maid to save the positions of your open windows across many apps and later restore those positions when things become a mess. With Display Maid you don’t have to restore windows one at a time, or even one app at a time. Display Maid restores all saved window positions across all apps with one command. It will also restore window positions automatically when it detects a workspace change.
http://www.funk-isoft.com/index.php/display-maid

Mapping problem with compressed key update record (target format)...

Hi Guys,
Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
How to overcome this issue, any idea...
2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
*= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
*Mapping problem with compressed key update record (target format)...*
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
Mapping problem with compressed key update record (target format)...
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Any inputs / help would be appreciated.
Regards,
Manish

The SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate.

Strange problem with desktop

Hi, I have a very strange problem with desktops and dashboards something else. For example, when I am on desktop 2 and i go to desktop 1, when I click with the mouse on it, it goes again to desktop 2. or when I am on desktop 1 and I go to ddashboard, it returns again to desktop 1 when i click to something in the dashboard.
but, if i am on desktop 3, and i go to desktop 1 throguh desktop 2, there is no problem. the same if i go from desktop 2 to dashboard.
I hope i've been clear enough to let you understand this... explanation =P
Anyone can help?

My system has started "freezing". Actually, usually when I'm browsing the net, Chromium stops loading pages. Conky stops updating, and usually I can't switch to another programs. I can't start xkill from menu, menu opens but nothing starts. If I run "ls" etc in Terminal, nothing happens
I can however control+alt+F1 to CLI, but if I try to login nothing happens.If doesn't help even if I kill X (I started it with startx). And if I don't kill X, I can't go back from CLI with control+alt+F7, there's just a black screen.
I'm using Nvidia drivers also, and XFCE4. This started happening some time ago, I think I was using Gnome2 back then. And I have updated my system, and this has happened at least with 3 kernel versions. There's nothing on logs. Well, actually, there's "TCP: Possible SYN flooding on port 6881. Sending cookies" errors on everything.log. But those don't happen when system freezes. And sometimes Chromium stops loading pages but other programs don't freeze, I think it's a problem with cache or something.
Not really sure if this everything happens because of Chromium. I think I'm gonna switch back to Firefox and see what happens. Usually I'm running Chromium, Opera (use it just for a couple of pages), couple of Terminals and Kaffeine.

Hallo guys, I have macbook pro buy march this years, now i have problem whit desktop sometime i recive green screen did some have idee what can be problem

Hallo guys, I have macbook pro buy march this years, now i have problem whit desktop sometime i recive green screen did some have idee what can be problem

You are still under warranty. Call Apple Care.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

WINDOWS INSTALLER PROBLEM WITH DESKTOP MANAGER

Please help!! I am a user of the Blackberry Desk Top Manager, running under Windows XP Service Pack 4.5. I recently downloaded the latest version of Desk Top Manager and I am getting the following error: - Flashing intermittently, whilst running the newly downloaded Desktop Manager - "Windows Installer Preparing to Install". I have removed the programme, downloaded it again from Blackberry's website and run my Windows updates to no available. I have now been advised that I must format my entire computer and reload Windows, which seems to be a rather onerous solution, as I have been using Blackberry's Synchronisation Programme for over a year successfully before this took place. I should appreciate it if you would let me know how this problem on my IBM Think Pad Laptop can be cured.

halimsujanto wrote:
Hi all..
I am having the same problem with desktop software 6, but my problem is more like this..
http://www.blackberry.com/btsc/KB19300
The Windows Installer pop-up during installation and cannot continue, it seems that windows installer 4.5 is the cause, but I cannot uninstall windows installer 4.5 because many of my programs were using this..
In this knowledge base solution it says to run BlackBerry Desktop Software.msi, but on BlackBerry Desktop Software 6, it need to run from setup.exe and cannot continue.. so I cannot install desktop software 6 on my computer, but I am able to install older version desktop software ie. version 4.2 to version 5.
I think that I am gonna reply here instead of making new thread about windows installer 4.5 and Desktop Software 6, please move if I did wrong.
PS. Bifocals..
The link you provided is missing. Or it just back to BlackBerry Technical Solution Center page and I tried searching the KB13781 with no success.
Please if there is other link that may be good for my problem.
Thank you very much.
Hi ihalimsujanto and welcome to the forums!
My first concern is that you do have a version of desktop manager that you can maintain your device and PIM data with, do you?
Please post back with as much detail as possible regarding your hardware and software setup.
Also post what steps you have taken to resolve the issue. The more detail we have the better we can help you. I'll reread KB 19300 and find what happened to my broken link.
Thanks.
Bifocals
EDIT:
ihalimsujanto,
Please review this Microsoft Knowledgebase Article ID: 555175
How to resolve Common "Windows Installer" Problems
Methods 3 and 4 may be pertinent.
Let us know how it goes!
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Problem configuring Username token profile on ALSB

Hi All !!
First of all, thanks for your support!!
I'm facing a problem configuring an active intermediary Proxy service with username token profile. This proxy service has a security policy referencing Auth.xml file to implement Username token profile. That proxy calls a business service which calls a web service.
On test page, username and password is requested (already created in the security domain), then an error is returned "Unable to add security token for identity".
Below you can find the Invocation Trace:
Invocation Trace
(receiving request)
Initial Message Context
added $body
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<per:getPersona xmlns:per="http://com/indra/persona">
<per:nombre>string</per:nombre>
<per:apellidos>string</per:apellidos>
</per:getPersona>
</soapenv:Body>
added $header
<soapenv:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
</soapenv:Header>
added $inbound
<con:endpoint name="ProxyService$PruebaWSsecurity$PersonaProxy92" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>getPersona</con:operation>
</con:service>
<con:transport>
<con:uri>/PersonaProxy92</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
</con:response>
</con:transport>
*<con:security>*
*<con:transportClient>*
*<con:username><anonymous></con:username>*
*</con:transportClient>*
*<con:messageLevelClient>*
*<con:username>securityUser</con:username>*
*<con:principals>*
*<con:group>Administrators</con:group>*
*<con:group>IntegrationAdministrators</con:group>*
*</con:principals>*
*</con:messageLevelClient>*
*</con:security>* </con:endpoint>
added $messageID
2741921765813726088-1b0fcf1c.12204e4868c.-8f3
RouteNode1
Routed Service
Route to: "PersonaBusiness92"
$outbound:
<con:endpoint name="BusinessService$PruebaWSsecurity$PersonaBusiness92" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>getPersona</con:operation>
</con:service>
<con:transport>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
</con:request>
</con:transport>
<con:security>
<con:doOutboundWss>false</con:doOutboundWss>
</con:security>
</con:endpoint>
$body (request):
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<per:getPersona xmlns:per="http://com/indra/persona">
<per:nombre>string</per:nombre>
<per:apellidos>string</per:apellidos>
</per:getPersona>
</soapenv:Body>
$header (request):
<soapenv:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
</soapenv:Header>
$attachments (request):
<con:attachments xmlns:con="http://www.bea.com/wli/sb/context"/>
Message Context Changes
added $outbound
<con:endpoint name="BusinessService$PruebaWSsecurity$PersonaBusiness92" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>getPersona</con:operation>
</con:service>
<con:transport>
<con:uri>http://esmadaix01:9103/WSPersona/Persona</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<tran:user-header name="SOAPAction" value=""""/>
<tran:user-header name="X-Powered-By" value="Servlet/2.4 JSP/2.0"/>
<http:Content-Type>text/xml; charset="utf-8"</http:Content-Type>
<http:Date>Mon, 22 Jun 2009 10:34:18 GMT</http:Date>
<http:Transfer-Encoding>chunked</http:Transfer-Encoding>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
<tran:response-message xmlns:tran="http://www.bea.com/wli/sb/transports">OK</tran:response-message>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
<http:http-response-code>200</http:http-response-code>
</con:response>
</con:transport>
<con:security>
<con:doOutboundWss>false</con:doOutboundWss>
</con:security>
</con:endpoint>
changed $header
<soapenv:Header xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"/>
changed $inbound
<con:endpoint name="ProxyService$PruebaWSsecurity$PersonaProxy92" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>getPersona</con:operation>
</con:service>
<con:transport>
<con:uri>/PersonaProxy92</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
</con:response>
</con:transport>
<con:security>
<con:transportClient>
<con:username><anonymous></con:username>
</con:transportClient>
<con:messageLevelClient>
<con:username>securityUser</con:username>
<con:principals>
<con:group>Administrators</con:group>
<con:group>IntegrationAdministrators</con:group>
</con:principals>
</con:messageLevelClient>
</con:security>
</con:endpoint>
changed $attachments
<con:attachments xmlns:con="http://www.bea.com/wli/sb/context"/>
changed $body
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<m:getPersonaResponse xmlns:m="http://com/indra/persona">
<persona>
<correo>[email protected]</correo>
<telefono>91546789</telefono>
</persona>
</m:getPersonaResponse>
</soapenv:Body>
System Error Handler
$fault: <con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-386201</con:errorCode>
*<con:reason>*
*A web service security fault occurred[{http://schemas.xmlsoap.org/soap/envelope/}Server][Unable to add security token for identity]*
*</con:reason>*
<con:details>
<err:WebServiceSecurityFault xmlns:err="http://www.bea.com/wli/sb/errors">
<err:faultcode xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">soapenv:Server</err:faultcode>
<err:faultstring>
Unable to add security token for identity
</err:faultstring>
</err:WebServiceSecurityFault>
</con:details>
<con:location>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>

We have the same problem.
Have you the reposne?
Request Document
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
<soapenv:Body>
<t17:pais_getByDesc xmlns:t17="http://www.ejie.es/webServiceEJB/t17iApiWSWar">
<t17:value>bul</t17:value>
<t17:responseWithParents>false</t17:responseWithParents>
</t17:pais_getByDesc>
</soapenv:Body>
</soapenv:Envelope>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<wsse:Security soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken wsu:Id="unt_ZqnW7MTAb7P77cPL" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:Username>weblogic10</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">??????????????</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soap:Header>
<soapenv:Body>
<t17:pais_getByDesc xmlns:t17="http://www.ejie.es/webServiceEJB/t17iApiWSWar">
<t17:value>bul</t17:value>
<t17:responseWithParents>false</t17:responseWithParents>
</t17:pais_getByDesc>
</soapenv:Body>
</soapenv:Envelope>
Response Document
The invocation resulted in an error: .
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<env:Fault>
<faultcode>env:Server</faultcode>
<faultstring>
Unable to add security token for identity
</faultstring>
</env:Fault>
</env:Body>
</env:Envelope>
Response Metadata
<con:metadata xmlns:con="http://www.bea.com/wli/sb/test/config">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">1</tran:response-code>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:metadata>
Invocation Trace
(receiving request)
Initial Message Context
added $body
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<t17:pais_getByDesc xmlns:t17="http://www.ejie.es/webServiceEJB/t17iApiWSWar">
<t17:value>bul</t17:value>
<t17:responseWithParents>false</t17:responseWithParents>
</t17:pais_getByDesc>
</soapenv:Body>
added $header
<soapenv:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
</soapenv:Header>
added $inbound
<con:endpoint name="ProxyService$ctxweb$t17i_wss-1" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>pais_getByDesc</con:operation>
</con:service>
<con:transport>
<con:uri>/ctxweb/t17i_wss_1</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
</con:response>
</con:transport>
<con:security>
<con:transportClient>
<con:username><anonymous></con:username>
</con:transportClient>
<con:messageLevelClient>
<con:username>weblogic10</con:username>
<con:principals>
<con:group>AdminChannelUsers</con:group>
<con:group>Administrators</con:group>
<con:group>IntegrationAdministrators</con:group>
</con:principals>
</con:messageLevelClient>
</con:security>
</con:endpoint>
added $messageID
6412299231164769748--466a8253.12535a4d4fe.-7f29
RouteTo_NORA-bs
Routed Service
Route to: "NORA-bs"
$outbound:
<con:endpoint name="BusinessService$business$NORA-bs" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>pais_getByDesc</con:operation>
</con:service>
<con:transport>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
</con:request>
</con:transport>
<con:security>
<con:doOutboundWss>false</con:doOutboundWss>
</con:security>
</con:endpoint>
$body (request):
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<t17:pais_getByDesc xmlns:t17="http://www.ejie.es/webServiceEJB/t17iApiWSWar">
<t17:value>bul</t17:value>
<t17:responseWithParents>false</t17:responseWithParents>
</t17:pais_getByDesc>
</soapenv:Body>
$header (request):
<soapenv:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
</soapenv:Header>
$attachments (request):
<con:attachments xmlns:con="http://www.bea.com/wli/sb/context"/>
Message Context Changes
added $outbound
<con:endpoint name="BusinessService$business$NORA-bs" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>pais_getByDesc</con:operation>
</con:service>
<con:transport>
<con:uri>
http://www.integracion.jakina.ejiedes.net/t17iApiWSWar/t17iApiWS
</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<tran:user-header name="Set-Cookie" value="JSESSIONID=Q02mLVvKw8hRcvYm7nwmyJyCQHC2FJknpGbltNPnsqp2gstzHy0M!-1566668667!734317392; path=/"/>
<http:Connection>close</http:Connection>
<http:Content-Length>666</http:Content-Length>
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:Date>Tue, 01 Dec 2009 14:59:22 GMT</http:Date>
<http:Server>
Apache/2.0.59 (Unix) mod_ssl/2.0.59 OpenSSL/0.9.7a
</http:Server>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
<tran:response-message xmlns:tran="http://www.bea.com/wli/sb/transports">OK</tran:response-message>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
<http:http-response-code>200</http:http-response-code>
</con:response>
</con:transport>
<con:security>
<con:doOutboundWss>false</con:doOutboundWss>
</con:security>
</con:endpoint>
changed $body
<env:Body xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<m:pais_getByDescResponse xmlns:m="http://www.ejie.es/webServiceEJB/t17iApiWSWar">
<n1:result xsi:type="n2:ArrayOfPais" xmlns:n1="http://www.ejie.es/webServiceEJB/t17iApiWSWar" xmlns:n2="java:t17i.vo">
<n2:Pais xsi:type="n2:Pais">
<n2:descripcionOficial>Bulgaria</n2:descripcionOficial>
<n2:id>104</n2:id>
</n2:Pais>
</n1:result>
</m:pais_getByDescResponse>
</env:Body>
changed $attachments
<con:attachments xmlns:con="http://www.bea.com/wli/sb/context"/>
changed $inbound
<con:endpoint name="ProxyService$ctxweb$t17i_wss-1" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>pais_getByDesc</con:operation>
</con:service>
<con:transport>
<con:uri>/ctxweb/t17i_wss_1</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
</con:response>
</con:transport>
<con:security>
<con:transportClient>
<con:username><anonymous></con:username>
</con:transportClient>
<con:messageLevelClient>
<con:username>weblogic10</con:username>
<con:principals>
<con:group>AdminChannelUsers</con:group>
<con:group>Administrators</con:group>
<con:group>IntegrationAdministrators</con:group>
</con:principals>
</con:messageLevelClient>
</con:security>
</con:endpoint>
changed $header
<soapenv:Header xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"/>
System Error Handler
$fault: <con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-386201</con:errorCode>
<con:reason>
A web service security fault occurred[{http://schemas.xmlsoap.org/soap/envelope/}Server][Unable to add security token for identity]
</con:reason>
<con:details>
<err:WebServiceSecurityFault xmlns:err="http://www.bea.com/wli/sb/errors">
<err:faultcode xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">soapenv:Server</err:faultcode>
<err:faultstring>
Unable to add security token for identity
</err:faultstring>
</err:WebServiceSecurityFault>
</con:details>
<con:location>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>

Problem configuring RVS4000 router

I just purchase the Cisco Router RVS4000 vpn and I am having problem configuring the VPN option. I just try all way I could imaging, but somehow something are missing and I don't know what it is. Here are a image of my current configuration.

Without examining this in detail, it is only half of the equation. The other end of the tunnel needs to be configured as well. BTW, don't ever post your WAN IP and shared key in a public forum. Change the key.

DIAdem 9.1; Windows2000; right problem; "Configuration-Drive Write Protected" for USER

Hallo community !
similar to these threads
http://forums.ni.com/ni/board/message?board.id=60&message.id=322&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=60&message.id=647&requireLogin=False
i run into problems working with DIAdem 9.1 on Windows 2000 SP4!
The Diadem installation went quite well.
My problem:
only "Administrator" and "Power User" have the privilige to "WRITE" to the DIAdem install directory.
Trying to start Diadem as non priviliged USER I get something like:
DIAdem Configuration-Drive "C:\PROGRAM FILES\ NATIONAL INSTRUMENT\DIADEM 9.10" WRITE PROTECTED!
I installed & started DIAdem for one
time with Administrator rights. I activated the Product and exported
the KEY to a License Server. Everything works fine for Power Users an
Administrators. Only "simple" USERs are not able to start Diadem due to
missing WRITE permissions. i can't grand this permissions to
normal USERs :-(
Playing around in Registry -> "RegWriteAccessAllow" ("0","1") (DWORD) (HKEY_LOCAL_MACHINE/Software/National Instruments/Diadem/9.10),
didn't solved the problem.
I switched back to "local License" Managment (local Key files) but the Probelm persists.
thanks in advance
P.S.
Quote: "You have to be at least a "Power User" in Windows 2000 to run DIAdem in Windows 2000."
http://forums.ni.com/ni/board/message?board.id=60&message.id=102&requireLogin=False
is this right ?
Message Edited by DirkT on 08-01-2005 03:58 PM
Message Edited by DirkT on 08-01-2005 04:02 PM

Hi DirkT,
Running DIAdem with User rights has different aspects we need to look at.
1) Registry Write Access
Launching DIAdem the first time with administrative rights registers some OLE components in the registry. After this step no more Admin rights are necessary for the registry. However running DIAdem as user might result in error messages as DIAdem tries to re-register the components again. You can avoid this by setting the RegWriteAccessAllow Key to 0 (see online help under "Administrator Notes")
2) File / Folder Write Access to the DIAdem Installation Folder
DIAdem needs write access to certain files e.g. the error logfile DEM_ERRS.001 or DESKTOP.DDD when saving configurations. You may change the folder where these file are being stored and searched for to a writeable folder by launching DIAdem with the "/d<NewFolder\MyDesktop.ddd>" start parameter or by setting the environment variable "DemDDD" to that folder. Then move the following files from the DIAdem installation folder to your new writeable folder:
*.ddd
userpar.par
dem_errs.*
3) File / Folder Write Access to other Folders
There are a number of other folders that DIAdem 9.x needs write access to and which cannot be changed. All of these folders are located by default under "%ProgramFiles%\National Instruments\Shared". Currently you need your Admin to give you write access to that folder and below
For future versions of DIAdem the team is working to make running under user rights easier.
Hope that helps,
Marcus

Problems configuring router after hard reset

I'll start with my 'vitals' ---
* WRK54G Wireless Router
* Cable internet
* Desktop computer is wired to the router
* Roku media player - wireless connection (will play my mp3s off of the computer or listen to internet radio stations)
* Tivo wirelessly connected
This morning, I tried to play some music off of my computer on the Roku media player. It would not communicate with the computer, but it would find the internet stations. After some trial and error, I tried to make the Tivo connect and it also failed to find the computer. The computer itself also could not find the internet, but the Roku was streaming music from the 'net fine. I exhausted my limited networking knowledge and decided it was time to bite the bullet and do a full restart on the router.
I turned off the computer and the router. The modem has a battery backup so I reset it and while it was booting back up, I plugged the computer into the modem. Once the computer started, the internet was up on the computer and felt encouraged. I found and ran the install disk that came with the router and followed it step by step. After getting a few more errors, I got the setup program to find the internet through the router and I could proceed to the next step. When I got to setting my time zone, an error came up that the modem could not be configured and I should hold the reset button again for 10 seconds. I felt discouraged again. I reset it, and nothing. Tried again nothing. It will not get through the guided set up, but the internet is apparently working.
I thought I would just get into the web-based set up page. I can log in with the default password and get to all of the screens, but whenever I try to save changes (whether I made any or not) the password box comes back up and the default password (or any password I tried to change it to) will make it go away.
So basically, my problems are: 1) the guided setup will not finish 2) the web-based setup will not let me make any changes because it does not recognize any password.
Thanks for any help in advance...
Chris
PS -- after I post this, I am going to reset the computer again and unplug the internet from the router just to see if I can get the web-based setup to work. I'll post the results, one way or another.
Message Edited by structuralpoke on 08-18-2007 02:01 PM

I, and others in this forum, have had problems saving Linksys router settings too. I logged into my router fine, but couldn't save the settings without a password screen coming up. No password is accepted. I contacted Linksys Help and received no solution. I looked on this forum and saw mentioned that the problem may be with Norton Internet Security (NIS). One person said they just temporarily disabled NIS and then they were able to save their router settings before reenabling NIS again. I tried that, ended up turning off every setting in my NIS, rebooting with them off, etc, but it didn't help with the ability to save my router settings. I have NIS 2007 and the NIS Add-On pack (needed because for some reason Norton took away features from previous versions and after people complained they made them available again with the add-on pack). I planned to remove all of NIS (after I made notes of my modifications), and started by removing the NIS Add-On pack first. After a reboot I tried to save my router settings and it worked! Phew. I got them all set and tested, then I installed the NIS Add-On pack again and all is well. When I saw people had made comments on this forum about this problem for 8 months at least I was disappointed that Linksys Help hadn't already been aware of the problem and able to give the solution.

Error when configuring Desktop Software with Outlook 2007 Calendar

Hello,
I am trying to find some help for a problem I'm having with a Blackberry 8100. I would like to use the Desktop Software 5.0 in conjunction with Outlook 2007 (on Windows 7 64 bits) to sync the calendar between the device and the computer. Actually I pretend to change Lotus Notes (which worked perfectly) for Outlook 2007.
The problem appears during the configuration process on the Desktop Software. I go to the configuration wizard for the calendar, choose Outlook, select bidirectional syncronization and then after clicking Next a small window appears (it happens also with both one-way options).
The window has Error as title and no other text, just an OK button. After closing it the wizard goes on asking for which Outlook profile to sync with. Unfortunately, the drop menu list does not show any profiles, it is completely blank.
I've tried creating, removing and renaming new profiles helplessly, as the error windows appears again and no profile is listed.
How could I solve it? Any idea would be appreciated.
Thanks for your help,
Roger

Hey becgps,
Welcome to the BlackBerry Support Community Forums.
Have you tried performing a detect and repair in Microsoft Outlook and then attempt to setup the configuration?
For more information about Detect and repair: www.blackberry.com/btsc/KB02403
Let me know if you experience the problem after this.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Small problem with desktop

When I chose desktop picture from my pictures folder (by clicking on plus and browsing the picture in desktop preferences) it doesn't show previews in some of the folders - it shows empty icons without pictures. I know it's not a major problem but still irritating. Does anyone know why this can be and how to fix it? (when I open same folders with finder everything is shown normally)

Make sure you have connect the speaker jack in green color out port which is back on the tower.
Now perform this steps.
Step1 Changes audio settings in BIOS
1. To enter the BIOS, turn on the computer and begin pressing the F10 or F1 key
repeatedly untila BIOS Setup screenopens.
2. In the BIOS Setup screen, press the F5 key.
3. Select yesor OK(press the Enter key).
4. Press the F10 key. Select yes or OK to save the default settings (press
the Enter key).
5. Start the computer and check for sound. If there is still no sound,
continue with these steps.
6. Use the Left and Right Arrow keys to select the advanced tab.
7. Find and select the advanced menu items that correspond to audio. This
may be one of the following:
8. Onboard Audio, Onboard Audio Options, I/O Device Configuration, On-board
Sound, Audio Codec
9.Select either Enabled or disabled depending on the computer configuration
and press Enter.
10. Press Enter to save and exit and check for sound.

Configuration desktop and laptop for developing ipad apps

I am new to developing ipad apps. Can you please suggest the cheapest configuration for apple desktop and laptop

vihrao wrote:
Also I want to run web apps with backend database on this.
Makes no difference. Any machine that Apple has sold in the past 4 years runs Mountain Lion and Xcode with no problem. Xcode is far more demanding than a backend database and local web server.

Problem configuring Desktop PC as RT target

Similar Messages

Maybe you are looking for