Problem Configuring Single-System TMS in new install of SM 7.1

Going through post install steps of new Solution Manager 7.1 system; SID is SMV
Follwed the instructions to set up the Transport Management System in Client 000. The consistency check returns all green checkmarks.
User TMSADM exists in client 000, Profiles TP_DOMAIN_SMV.PFL and TP_DOMAIN_SMV.BAK exist along with DEFAULT.CFG in usr\sap\trans\bin.
STMS config created RFC's TMSADM-SMV.DOMAIN_SMV and TMSSUP-SMV.DOMAIN_SMV, and they both pass the "Connection Test". ("@" replaced by "-" in this message so they don't look like E-Mail addresses)
Used SM59 to create an RFC for SMV that passes the "Connection Test"
However, using SOLMAN_SETUP, the step to "Check TMS Configuration" fails with message "No valid RFC destination exists for system SMV"
2 questions:
1. Does that matter?
2. How can I get a green light on this check?
Thanks in advance for your time and consideration.

Hi Nicholas,
I'm not sure. The only thing I know for sure is that it is 7.1
I attempted to do the update, and got to the screen where it would take me from ISS (initial) to SPS03, so I guess the answer is no, we're not on SP03.
I have not been able to accomplish the update because my version of SPAM is not quite up-to-date. I downloaded a later version of SPAM but it got put into my download basket as requiring approval. If I understand it correctly, Maintenance Optimizer is the tool I need to approve it, but that transaction isn't yet available in our system. So I'm trying to figure that out right now.
I haven't finished all of the Post Install activities yet, as you can see from this thread, and apparently those are necessary before updating to SPS03.
As you can see, I'm a rookie at basis, but I'm all there is here. My 10 years of SAP Development haven't prepared me for the dark side of SAP.
Thanks Nicholas.

Similar Messages

I have a licensing Problem reinstaling Acrobat 9 now under new installed OSX Yosemite.

Troubleshooting incl. deleting directories etc. doesn't help. Any idea?
The repair tool doesn't seem to work (Adobe - Adobe Licensing Repair Tool), the launcher comes up with the error message, it's not longer supporting Power PC
I have a late 2011 MB Pro with a new Install of OX Yosemite

Here is the compatibility statement for Acrobat Pro on a MAC:
Adobe Acrobat 9 Pro (English, French, German) on Mac OS
PowerPC G4, G5, or Intel processors
Mac OS X v. 10.4.11 or 10.5
256 MB of RAM (512 MB recommended)
1.42 GB of available hard-disk space
1,024 x 768 screen resolution
DVD drive
I am not sure how to interpret the OS for a MAC, but it is what is stated. I don't think that Adobe certifies AA 9 for Yosemite, but that does not mean it will not work.

Fixed a problem of repeated crashing with a new install of Firefox 28 on Windows 8.1

This isn't so much a question as a contribution of solution.
On a new computer running Windows 8.1 a new installation of Firefox 28 was repeatedly crashing or freezing ("no response"). Loading pages could be slow, and scrolling jagged. Totally unusable, especially after playing content with Shockwave.
Although I had not installed any plugins apart from Shockwave and Adobe Acrobat, I had a look and was surprised to see several that I had never asked for. I deactivated those I do not think I need:
Intel Identity Protection Technology
Photo Gallery
WildTangent Games App V2 Presence Detector.
Since deactivating these, Firefox is running fine. But I had been obliged to use another navigator for a week until finding the time to research the problem.
Why are these unasked-for and obviously (for at least one) troublesome plug-ins installed by default? It's not doing Firefox any good!

I return to this thread more than 3 months later, during which time I have not had a single day's satisfactory use of the latest versions of Firefox over Windows 8.1 with Flash content. Not very stable at the best of times (constant increase of memory usage) and when accessing Flash content, ffx came as near as I've ever seen an app come, to getting drunk. Memory goes through the roof, repeated freezes, disappearances/reappearances in the UI and very difficult to shut down. I've tried all the recommended fixes, disabling hardware acceleration, protected mode etc. to no avail (but a LOT of wasted time).
I've been having to use IE to access Flash content.
Last night I finally came to what, for me, is a quite radical decision to downgrade. I'm not _recommending_ this to anyone, but some may find it helpful as long as they're aware of risks and take appropriate precautions. Note that the official Mozilla archive page puts switching to a different browser _before_ returning to an older version of Ffx.
I've gone back to Ffx 28.0 dated 2014.03.15 (the Ides of March, I now note...) and Flash 10.3.183.90 which I downgraded to a bit earlier as part of my attempts to find a solution. Firefox is now stable, memory usage reasonable (currently 202MB for 6 tabs including some Flash content).
I currently have only one comment, handling of marquees (which has always been jerky in Ffx) I now see is using ''excessive processor time (up to 15% on a Core i3 with 4 GB RAM!)'' and jumps of 5-10 MB in memory usage. The latter returns to initial level at each cycle '''but I rather suspect doesn't in Ffx 31''', which might contribute to an apparent leak. [Edit : this seems all right on a different machine, so will have to find what's causing the problem on mine!]
Fortunately the cpu and memory usage disappear as soon as the marquee is pushed out of the viewport... so I conclude Firefox is not handling them if it doesn't have to show them.
Will post back with any developments but at the moment I'm staying with these versions!

Problem Deleting Previous System after Archive and Install

Earlier in my time with this wonderful iMac, I did an Archive and Install to try and resolve a slight problem. I read all the docs beforehand and knew it would save the previous system in its own folder and saw that I could likely delete that folder afterwards.
I have waited months since then, (almost forgotten about this folder) but have never had reason to want anything there, so today decided to delete it.
I dragged the entire previous system folder to trash and tried to empty trash. It deleted most of the stuff, but kept one package DownloadReader7.pkg complaining of locked files.
I have used Pacificist to look at the contents of this package and it says it is a receipt. It contains elements of Adobe Reader Download Manager.app
I have looked on my present working system and can not find an equivalent.
So two questions...
1. Is it safe to delete this package (if I knew how)?
2. If it is safe to delete it, HOW do I, when it appears to have locked elements when I try to empty trash?

It's safe to delete any files in the PSF.
Usually all you need do is press the OPTION key before selecting Empty Trash. If that doesn't work the next thing to try is restart the computer after you've dragged the file to the Trash. If neither works then visit The XLab FAQs and read the FAQ on resolving Trash problems.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Configure STMS & transports as a single system

Hello,
I configured STMS as a single DEV system, without QA and PRD. I have a requirement to import the transports into the DEV system, after copying cofiles and datafiles from another dev system.
Is it possible to move another system transports into DEV System, configuring it as a single system landscape. If it is possible, kindly provide the steps.
Thanks,
Mohi

Hi
What you meant by "transport do not move" ?
Check here for Configuring Single Systems - Software Logistics - SAP Library
Also as per Matt's update, the same transport request also can be moved from command prompt or shell (on any OS);
log into sidadm
from Command prompt,
1) add request into buffer (this step may not be required if added earlier - as per Matt's update)
tp addtobuffer <transport number> <SID> pf=/usr/sap/trans/bin/<transport profile, i.e. TP_DOMAIN_<SINGLE SYSTEM SID>.PFL
2) then use below tp command to import the specific requests;
tp import <transport number> <SID> CLIENT=<client number> pf=/usr/sap/trans/bin/<transport profile, i.e. TP_DOMAIN_<SINGLE SYSTEM SID>.PFL
regards
Swami

Problem with boot / new install system ond SSD

Hi guys,
I have fresh installed system on my new SSD. I use my old HDD as external usb drive.
I have problem with boot when I dont have connected HDD to usb.
My system boot only to console no to KDE. When I connect external HDD to usb and reboot system, system boot normally.
Logs after boot.
Feb 26 16:46:39 arch systemd[1]: Reached target Login Prompts.
Feb 26 16:46:39 arch systemd[1]: Starting K Display Manager...
Feb 26 16:46:39 arch systemd[1]: Started K Display Manager.
Feb 26 16:46:39 arch systemd-logind[231]: New seat seat0.
Feb 26 16:46:39 arch systemd[1]: Started Login Service.
Feb 26 16:46:40 arch kernel: microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
Feb 26 16:46:40 arch kernel: platform microcode: Direct firmware load failed with error -2
Feb 26 16:46:40 arch kernel: platform microcode: Falling back to user helper
Feb 26 16:46:40 arch kernel: random: nonblocking pool is initialized
Feb 26 16:46:40 arch kernel: uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
Feb 26 16:46:40 arch laptop-mode[271]: enabled, not active
Feb 26 16:46:40 arch kernel: input: CNF7129 as /devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.0/input/input16
Feb 26 16:46:40 arch kernel: usbcore: registered new interface driver uvcvideo
Feb 26 16:46:40 arch kernel: USB Video Class driver (1.1.1)
Feb 26 16:46:40 arch systemd[1]: Started Wicd a wireless and wired network manager for Linux.
Feb 26 16:46:40 arch systemd[1]: Starting Network.
Feb 26 16:46:40 arch systemd[1]: Reached target Network.
Feb 26 16:46:40 arch systemd[1]: Starting OpenSSH Daemon...
Feb 26 16:46:40 arch systemd[1]: Started OpenSSH Daemon.
Feb 26 16:46:40 arch systemd[1]: Starting NoMachine Server daemon...
Feb 26 16:46:40 arch sshd[373]: Server listening on 0.0.0.0 port 22.
Feb 26 16:46:40 arch sshd[373]: Server listening on :: port 22.
Feb 26 16:46:40 arch mtp-probe[404]: checking bus 7, device 2: "/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2"
Feb 26 16:46:40 arch mtp-probe[404]: bus: 7, device: 2 was not an MTP device
Feb 26 16:46:40 arch kernel: hidraw: raw HID events driver (C) Jiri Kosina
Feb 26 16:46:40 arch kernel: usbcore: registered new interface driver usbhid
Feb 26 16:46:40 arch kernel: usbhid: USB HID core driver
Feb 26 16:46:40 arch systemd[1]: Starting Sound Card.
Feb 26 16:46:40 arch systemd[1]: Reached target Sound Card.
Feb 26 16:46:40 arch systemd-udevd[145]: renamed network interface eth0 to enp3s0
Feb 26 16:46:40 arch kernel: psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
Feb 26 16:46:40 arch kernel: psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
Feb 26 16:46:40 arch kernel: i915 0000:00:02.0: irq 45 for MSI/MSI-X
Feb 26 16:46:40 arch kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Feb 26 16:46:40 arch kernel: [drm] Driver supports precise vblank timestamp query.
Feb 26 16:46:40 arch kernel: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Feb 26 16:46:40 arch kernel: iTCO_vendor_support: vendor-support=0
Feb 26 16:46:40 arch kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
Feb 26 16:46:40 arch kernel: iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860)
Feb 26 16:46:40 arch kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Feb 26 16:46:40 arch kernel: input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input15
Feb 26 16:46:40 arch systemd-logind[231]: Watching system buttons on /dev/input/event2 (Lid Switch)
Feb 26 16:46:40 arch systemd-logind[231]: Watching system buttons on /dev/input/event1 (Sleep Button)
Feb 26 16:46:40 arch systemd-logind[231]: Watching system buttons on /dev/input/event3 (Power Button)
Feb 26 16:46:41 arch kernel: microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
Feb 26 16:46:41 arch kernel: platform microcode: Direct firmware load failed with error -2
Feb 26 16:46:41 arch kernel: platform microcode: Falling back to user helper
Feb 26 16:46:41 arch kernel: input: 2.4G Wireless Wireless Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input17
Feb 26 16:46:41 arch kernel: hid-generic 0003:1915:0F01.0001: input,hidraw0: USB HID v1.11 Keyboard [2.4G Wireless Wireless Receiver ] on usb-0000:00:1d.1-2/input0
Feb 26 16:46:41 arch kernel: input: 2.4G Wireless Wireless Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input18
Feb 26 16:46:41 arch kernel: hid-generic 0003:1915:0F01.0002: input,hidraw1: USB HID v1.11 Mouse [2.4G Wireless Wireless Receiver ] on usb-0000:00:1d.1-2/input1
Feb 26 16:46:41 arch kernel: BUG: unable to handle kernel NULL pointer dereference at (null)
Feb 26 16:46:41 arch kernel: IP: [<ffffffffa06c1317>] mousedev_open_device+0x77/0x100 [mousedev]
Feb 26 16:46:41 arch kernel: PGD b650b067 PUD b650a067 PMD 0
Feb 26 16:46:41 arch kernel: Oops: 0000 [#1] PREEMPT SMP
Feb 26 16:46:41 arch kernel: Modules linked in: mousedev(+) hid_generic iTCO_wdt iTCO_vendor_support ath9k(+) usbhid ath9k_common hid ath9k_hw ath uvcvideo mac80211 microcode(+) videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media evdev psmouse serio_raw pcspkr cfg80211 lpc_ich i915(+) atl1e snd_hda_codec_via snd_hda_intel drm_kms_helper snd_hda_codec drm snd_hwdep snd_pcm snd_page_alloc i2c_algo_bit i2c_core snd_timer asus_laptop snd battery ac soundcore sparse_keymap acpi_cpufreq rfkill video input_polldev thermal intel_agp intel_gtt shpchp processor button ext4 crc16 mbcache jbd2 sr_mod cdrom sd_mod atkbd libps2 ahci libahci libata scsi_mod ehci_pci uhci_hcd ehci_hcd usbcore usb_common i8042 serio
Feb 26 16:46:41 arch kernel: CPU: 1 PID: 227 Comm: acpid Not tainted 3.13.5-1-ARCH #1
Feb 26 16:46:41 arch kernel: Hardware name: ASUSTeK Computer Inc. K50IJ /K50IJ , BIOS 217 12/04/2009
Feb 26 16:46:41 arch kernel: task: ffff88007ffeda00 ti: ffff8800b6516000 task.ti: ffff8800b6516000
Feb 26 16:46:41 arch kernel: RIP: 0010:[<ffffffffa06c1317>] [<ffffffffa06c1317>] mousedev_open_device+0x77/0x100 [mousedev]
Feb 26 16:46:41 arch kernel: RSP: 0018:ffff8800b6517c10 EFLAGS: 00010202
Feb 26 16:46:41 arch kernel: RAX: 0000000000000000 RBX: ffff8801390f5800 RCX: ffff8801390f5868
Feb 26 16:46:41 arch kernel: RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246
Feb 26 16:46:41 arch kernel: RBP: ffff8800b6517c28 R08: 0000000000000000 R09: ffff88013b001600
Feb 26 16:46:41 arch kernel: R10: 0000000000000000 R11: 0000000000000004 R12: 0000000000000000
Feb 26 16:46:41 arch kernel: R13: ffff8801390f5880 R14: ffff8800b3287558 R15: ffff880138c8f600
Feb 26 16:46:41 arch kernel: FS: 00007f8de7e14700(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000
Feb 26 16:46:41 arch kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Feb 26 16:46:41 arch kernel: CR2: 0000000000000000 CR3: 00000000b6507000 CR4: 00000000000407e0
Feb 26 16:46:41 arch kernel: Stack:
Feb 26 16:46:41 arch kernel: ffff88013926e400 ffff8801390f5800 ffff8801390f5878 ffff8800b6517c60
Feb 26 16:46:41 arch kernel: ffffffffa06c20cc ffff8801390f5b48 ffff8800b3287558 ffff880138c8f600
Feb 26 16:46:41 arch kernel: ffffffffa06c2e80 ffff880138c8f610 ffff8800b6517c98 ffffffff811a834f
Feb 26 16:46:41 arch kernel: Call Trace:
Feb 26 16:46:41 arch kernel: [<ffffffffa06c20cc>] mousedev_open+0xcc/0x150 [mousedev]
Feb 26 16:46:41 arch kernel: [<ffffffff811a834f>] chrdev_open+0x9f/0x1d0
Feb 26 16:46:41 arch kernel: [<ffffffff811a19e7>] do_dentry_open+0x1b7/0x2c0
Feb 26 16:46:41 arch kernel: [<ffffffff811aedc1>] ? __inode_permission+0x41/0xb0
Feb 26 16:46:41 arch kernel: [<ffffffff811a82b0>] ? cdev_put+0x30/0x30
Feb 26 16:46:41 arch kernel: [<ffffffff811a1e01>] finish_open+0x31/0x40
Feb 26 16:46:41 arch kernel: [<ffffffff811b1bf2>] do_last+0x572/0xe90
Feb 26 16:46:41 arch kernel: [<ffffffff811af0b6>] ? link_path_walk+0x236/0x8d0
Feb 26 16:46:41 arch kernel: [<ffffffff811b25cb>] path_openat+0xbb/0x6b0
Feb 26 16:46:41 arch kernel: [<ffffffff811b3cda>] do_filp_open+0x3a/0x90
Feb 26 16:46:41 arch kernel: [<ffffffff811c05c7>] ? __alloc_fd+0xa7/0x130
Feb 26 16:46:41 arch kernel: [<ffffffff811a2fd4>] do_sys_open+0x124/0x220
Feb 26 16:46:41 arch kernel: [<ffffffff811a30ee>] SyS_open+0x1e/0x20
Feb 26 16:46:41 arch kernel: [<ffffffff8152142d>] system_call_fastpath+0x1a/0x1f
Feb 26 16:46:41 arch kernel: Code: c0 6e e5 e0 5b 44 89 e0 41 5c 41 5d 5d c3 66 0f 1f 44 00 00 4c 89 ef 41 bc ed ff ff ff e8 a2 6e e5 e0 eb e0 48 8b 15 c9 21 00 00 <8b> 02 8d 48 01 85 c0 89 0a 75 c6 48 8b 05 37 1f 00 00 48 3d 60
Feb 26 16:46:41 arch kernel: RIP [<ffffffffa06c1317>] mousedev_open_device+0x77/0x100 [mousedev]
Feb 26 16:46:41 arch kernel: RSP <ffff8800b6517c10>
Feb 26 16:46:41 arch kernel: CR2: 0000000000000000
Feb 26 16:46:41 arch kernel: ---[ end trace 76aa0cbb67cf77f6 ]---
Feb 26 16:46:41 arch kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
Feb 26 16:46:41 arch systemd[1]: acpid.service: main process exited, code=killed, status=9/KILL
Feb 26 16:46:41 arch systemd[1]: Unit acpid.service entered failed state.
Feb 26 16:46:41 arch kernel: [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
Feb 26 16:46:41 arch systemd[1]: Started Laptop Mode Tools.
Feb 26 16:46:41 arch nxserver[374]: NX> 161 Enabled service: nxserver.
Feb 26 16:46:42 arch kernel: fbcon: inteldrmfb (fb0) is primary device
Feb 26 16:46:42 arch kernel: ath: phy0: Enable LNA combining
Feb 26 16:46:42 arch kernel: ath: EEPROM regdomain: 0x60
Feb 26 16:46:42 arch kernel: ath: EEPROM indicates we should expect a direct regpair map
Feb 26 16:46:42 arch kernel: ath: Country alpha2 being used: 00
Feb 26 16:46:42 arch kernel: ath: Regpair used: 0x60
Feb 26 16:46:42 arch kernel: ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Feb 26 16:46:42 arch kernel: ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90011e80000, irq=17
Feb 26 16:46:42 arch systemd-udevd[139]: renamed network interface wlan0 to wlp2s0
Feb 26 16:46:42 arch kernel: Console: switching to colour frame buffer device 170x48
Feb 26 16:46:42 arch kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
Feb 26 16:46:42 arch kernel: i915 0000:00:02.0: registered panic notifier
Feb 26 16:46:42 arch kernel: ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Feb 26 16:46:42 arch kernel: acpi device:38: registered as cooling_device2
Feb 26 16:46:42 arch kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input19
Feb 26 16:46:42 arch nxserver[374]: NX> 161 Enabled service: nxnode.
Feb 26 16:46:42 arch nxserver[374]: NX> 161 Enabled service: nxd.
Feb 26 16:46:42 arch systemd[1]: Started NoMachine Server daemon.
Feb 26 16:46:42 arch systemd[1]: Starting Multi-User System.
Feb 26 16:46:42 arch systemd[1]: Reached target Multi-User System.
Feb 26 16:46:42 arch systemd[1]: Starting Graphical Interface.
Feb 26 16:46:42 arch systemd[1]: Reached target Graphical Interface.
Feb 26 16:46:42 arch systemd[1]: Startup finished in 1.241s (kernel) + 3.231s (userspace) = 4.473s.
Feb 26 16:46:46 arch kernel: IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
Feb 26 16:46:48 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Feb 26 16:46:49 arch wicd[226]: dhcpcd[1383]: dhcpcd not running
Feb 26 16:46:49 arch dhcpcd[1383]: dhcpcd not running
Feb 26 16:46:49 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Feb 26 16:46:49 arch wicd[226]: Failed to connect to non-global ctrl_ifname: wlp2s0 error: No such file or directory
Feb 26 16:46:49 arch wicd[226]: dhcpcd[1389]: dhcpcd not running
Feb 26 16:46:49 arch dhcpcd[1389]: dhcpcd not running
Feb 26 16:46:49 arch kernel: IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
Feb 26 16:46:49 arch wicd[226]: Failed to connect to non-global ctrl_ifname: enp3s0 error: No such file or directory
Feb 26 16:46:49 arch wicd[226]: dhcpcd[1397]: dhcpcd not running
Feb 26 16:46:49 arch dhcpcd[1397]: dhcpcd not running
Feb 26 16:46:49 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Feb 26 16:46:49 arch wicd[226]: Failed to connect to non-global ctrl_ifname: wlp2s0 error: No such file or directory
Feb 26 16:46:51 arch systemd[1]: Starting Getty on tty2...
Feb 26 16:46:51 arch systemd[1]: Started Getty on tty2.
Feb 26 16:46:52 arch kernel: wlp2s0: authenticate with 08:86:3b:7f:86:08
Feb 26 16:46:52 arch kernel: wlp2s0: send auth to 08:86:3b:7f:86:08 (try 1/3)
Feb 26 16:46:52 arch kernel: wlp2s0: authenticated
Feb 26 16:46:52 arch kernel: ath9k 0000:02:00.0 wlp2s0: disabling HT/VHT due to WEP/TKIP use
Feb 26 16:46:52 arch kernel: wlp2s0: associate with 08:86:3b:7f:86:08 (try 1/3)
Feb 26 16:46:52 arch kernel: wlp2s0: RX AssocResp from 08:86:3b:7f:86:08 (capab=0x411 status=0 aid=4)
Feb 26 16:46:52 arch kernel: wlp2s0: associated
Feb 26 16:46:52 arch kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
Feb 26 16:46:53 arch dhcpcd[1416]: version 6.2.1 starting
Feb 26 16:46:54 arch dhcpcd[1416]: DUID 00:01:00:01:1a:96:a5:70:1c:4b:d6:a2:1f:ad
Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: IAID d6:a2:1f:ad
Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: soliciting an IPv6 router
Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: ipv6nd_sendrsprobe: sendmsg: Cannot assign requested address
Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: rebinding lease of 192.168.2.3
Feb 26 16:46:55 arch kernel: type=1006 audit(1393429615.096:2): pid=1406 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=1 res=1
Feb 26 16:46:55 arch login[1406]: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
Feb 26 16:46:55 arch systemd[1]: Starting user-0.slice.
Feb 26 16:46:55 arch systemd[1]: Created slice user-0.slice.
Feb 26 16:46:55 arch systemd[1]: Starting User Manager for 0...
Feb 26 16:46:55 arch kernel: type=1006 audit(1393429615.106:3): pid=1477 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=2 res=1
Feb 26 16:46:55 arch systemd[1]: Starting Session 1 of user root.
Feb 26 16:46:55 arch systemd[1]: Started Session 1 of user root.
Feb 26 16:46:55 arch systemd-logind[231]: New session 1 of user root.
Feb 26 16:46:55 arch systemd[1477]: pam_unix(systemd-user:session): session opened for user root by (uid=0)
Feb 26 16:46:55 arch login[1406]: ROOT LOGIN ON tty2
Feb 26 16:46:55 arch systemd[1477]: Failed to open private bus connection: Failed to connect to socket /run/user/0/dbus/user_bus_socket: No such file or directory
Feb 26 16:46:55 arch systemd[1477]: Mounted /sys/kernel/config.
Feb 26 16:46:55 arch systemd[1477]: Stopped target Sound Card.
Feb 26 16:46:55 arch systemd[1477]: Starting Default.
Feb 26 16:46:55 arch systemd[1477]: Reached target Default.
Feb 26 16:46:55 arch systemd[1477]: Startup finished in 7ms.
Feb 26 16:46:55 arch systemd[1]: Started User Manager for 0.
Feb 26 16:46:59 arch dhcpcd[1416]: wlp2s0: leased 192.168.2.3 for 283824000 seconds
Feb 26 16:46:59 arch dhcpcd[1416]: wlp2s0: adding route to 192.168.2.0/24
Feb 26 16:46:59 arch dhcpcd[1416]: wlp2s0: adding default route via 192.168.2.1
Feb 26 16:46:59 arch dhcpcd[1416]: forked to background, child pid 1522
Feb 26 16:47:10 arch kdm[238]: X server startup timeout, terminating
Feb 26 16:47:12 arch systemd-udevd[131]: worker [140] /devices/pci0000:00/0000:00:02.0 timeout; kill it
Feb 26 16:47:12 arch systemd-udevd[131]: seq 1255 '/devices/pci0000:00/0000:00:02.0' killed
Feb 26 16:47:12 arch systemd-udevd[131]: worker [146] /devices/platform/i8042/serio4/input/input15 timeout; kill it
Feb 26 16:47:12 arch systemd-udevd[131]: seq 1659 '/devices/platform/i8042/serio4/input/input15' killed
Feb 26 16:47:12 arch systemd-udevd[131]: worker [148] /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input18 timeout; kill it
Feb 26 16:47:12 arch systemd-udevd[131]: seq 1679 '/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input18' killed
Feb 26 16:47:12 arch kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Feb 26 16:47:12 arch systemd-udevd[131]: worker [140] terminated by signal 9 (Killed)
Feb 26 16:47:12 arch systemd-udevd[131]: worker [148] terminated by signal 9 (Killed)
Feb 26 16:47:12 arch systemd[1]: Starting Load/Save Screen Backlight Brightness of acpi_video0...
Feb 26 16:47:12 arch systemd[1]: Started Load/Save Screen Backlight Brightness of acpi_video0.
Feb 26 16:47:12 arch kernel: input: failed to attach handler mousedev to device input15, error: -4
Feb 26 16:47:12 arch systemd-udevd[131]: worker [146] terminated by signal 9 (Killed)
Feb 26 16:47:12 arch kernel: input: failed to attach handler mousedev to device input18, error: -4
Feb 26 16:47:12 arch kernel: mousedev: PS/2 mouse device common for all mice
Feb 26 16:47:13 arch kdm[238]: X server for display :0 cannot be started, session disabled
Feb 26 16:48:56 arch kernel: usb 7-2: USB disconnect, device number 2
Feb 26 16:48:56 arch laptop-mode[1782]: Laptop mode
Feb 26 16:48:56 arch laptop-mode[1783]: enabled, not active
Feb 26 16:48:56 arch laptop-mode[1834]: Laptop mode
[xx@arch Desktop]$ uname -a
Linux arch 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64 GNU/Linux
Could you please someone help me with this?
Thanks

Sorry to bump this, but I'm having the exact same error tonight on my HTPC, any chance you found out what the problem was ?
To make matters worse, it's not happening every single time, but maybe every 4 out of 5 boots (same kernel, no changes in between.)
I thought this was a kernel issue related to this:
https://lkml.org/lkml/2014/3/10/359
I've tried adding atkbd and psmouse to my mkinitcpio.conf MODULES section and rebuilt, but no change.
I changed the NVidia driver from nvidia-304xx to nvidia-full-beta-all ( 334.21 ) from AUR but it had the same error at the same place.
Here's the part from `dmesg` where it borks:
[ 3.229195] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-3/input2
[ 3.236312] input: Logitech Unifying Device. Wireless PID:400e as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input6
[ 3.237230] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on usb-0000:00:04.0-3:1
[ 3.279150] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 3.280083] IP: [<ffffffffa1cbc317>] mousedev_open_device+0x77/0x100 [mousedev]
[ 3.280810] PGD c99ea067 PUD c9f4a067 PMD 0
[ 3.281266] Oops: 0000 [#1] PREEMPT SMP
[ 3.281668] Modules linked in: mousedev(+) nvidia(PO+) snd_hda_codec_realtek hid_logitech_dj usbhid hid usb_storage coretemp evdev microcode pcspkr serio_raw snd_hda_intel(+) snd_hda_codec shpchp snd_hwdep snd_pcm snd_page_alloc snd_timer snd soundcore i2c_nforce2 i2c_core wmi processor button r8169 mii ext4 crc16 mbcache jbd2 sd_mod ata_generic pata_acpi ahci libahci libata ohci_pci ohci_hcd ehci_pci ehci_hcd scsi_mod usbcore usb_common psmouse atkbd libps2 i8042 serio
[ 3.281820] CPU: 1 PID: 211 Comm: acpid Tainted: P O 3.13.6-1-ARCH #1
[ 3.281820] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./MCP7A-ION, BIOS 080015 10/10/2009
[ 3.281820] task: ffff8800ca5c1b00 ti: ffff8800c97f0000 task.ti: ffff8800c97f0000
[ 3.281820] RIP: 0010:[<ffffffffa1cbc317>] [<ffffffffa1cbc317>] mousedev_open_device+0x77/0x100 [mousedev]
[ 3.281820] RSP: 0018:ffff8800c97f1c10 EFLAGS: 00010202
[ 3.281820] RAX: 0000000000000000 RBX: ffff8800c9987000 RCX: ffff8800c9987068
[ 3.281820] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246
[ 3.281820] RBP: ffff8800c97f1c28 R08: 0000000000000000 R09: ffff8800cf401600
[ 3.281820] R10: 0000000000000000 R11: 0000000000000004 R12: 0000000000000000
[ 3.281820] R13: ffff8800c9987080 R14: ffff8800c0260058 R15: ffff8800c9f2a500
[ 3.281820] FS: 00007f8f12f05700(0000) GS:ffff8800cfa80000(0000) knlGS:0000000000000000
[ 3.281820] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 3.281820] CR2: 0000000000000000 CR3: 00000000ca93e000 CR4: 00000000000007e0
[ 3.281820] Stack:
[ 3.281820] ffff8800c9940000 ffff8800c9987000 ffff8800c9987078 ffff8800c97f1c60
[ 3.281820] ffffffffa1cbd0cc ffff8800c9987348 ffff8800c0260058 ffff8800c9f2a500
[ 3.281820] ffffffffa1cbde80 ffff8800c9f2a510 ffff8800c97f1c98 ffffffff811a83ef
[ 3.392372] Call Trace:
[ 3.398245] [<ffffffffa1cbd0cc>] mousedev_open+0xcc/0x150 [mousedev]
[ 3.398245] [<ffffffff811a83ef>] chrdev_open+0x9f/0x1d0
[ 3.398245] [<ffffffff811a1a87>] do_dentry_open+0x1b7/0x2c0
[ 3.398245] [<ffffffff811aee61>] ? __inode_permission+0x41/0xb0
[ 3.398245] [<ffffffff811a8350>] ? cdev_put+0x30/0x30
[ 3.398245] [<ffffffff811a1ea1>] finish_open+0x31/0x40
[ 3.398245] [<ffffffff811b1c92>] do_last+0x572/0xe90
[ 3.398245] [<ffffffff811af156>] ? link_path_walk+0x236/0x8d0
[ 3.398245] [<ffffffff811b266b>] path_openat+0xbb/0x6b0
[ 3.508083] random: nonblocking pool is initialized
[ 3.398245] [<ffffffff811b3d7a>] do_filp_open+0x3a/0x90
[ 3.398245] [<ffffffff811c0617>] ? __alloc_fd+0xa7/0x130
[ 3.398245] [<ffffffff811a3074>] do_sys_open+0x124/0x220
[ 3.398245] [<ffffffff811a318e>] SyS_open+0x1e/0x20
[ 3.398245] [<ffffffff815216ad>] system_call_fastpath+0x1a/0x1f
[ 3.556729] Code: 40 c1 85 df 5b 44 89 e0 41 5c 41 5d 5d c3 66 0f 1f 44 00 00 4c 89 ef 41 bc ed ff ff ff e8 22 c1 85 df eb e0 48 8b 15 c9 21 00 00 <8b> 02 8d 48 01 85 c0 89 0a 75 c6 48 8b 05 37 1f 00 00 48 3d 60
[ 3.556729] RIP [<ffffffffa1cbc317>] mousedev_open_device+0x77/0x100 [mousedev]
[ 3.556729] RSP <ffff8800c97f1c10>
[ 3.556729] CR2: 0000000000000000
[ 3.563412] ---[ end trace 590b482a8704c6ac ]---
[ 3.980300] input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
Here's the output on a good boot:
[ 3.415791] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-3/input2
[ 3.422256] input: Logitech Unifying Device. Wireless PID:400e as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input6
[ 3.422644] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on usb-0000:00:04.0-3:1
[ 3.434861] mousedev: PS/2 mouse device common for all mice
[ 3.853639] input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
Here's my mkinitcpio.conf
: grep -v ^\# /etc/mkinitcpio.conf
MODULES="atkbd psmouse"
BINARIES=""
FILES=""
HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
Last edited by corpdecker (2014-03-19 02:47:30)

How to Configure MS Exchange 2007 CCR and SCC Cluster in a single system

Hi i want to configure ms-exchange 2007 server for both SCC and CCR. i have two Windows Server 2008 on running on my hyper-v. by using cluster on both hyper v i want to install MS-Exchange 2007 for both SCC and CCR. ideally one windows server 2008 has
Active Nodes and another one has passive nodes. please guide me as i am new in the field

Duplicate of
http://social.technet.microsoft.com/Forums/exchange/en-US/edea43a1-59b4-4d26-9b41-76d0f4677095/how-to-configure-ms-exchange-2007-ccr-and-scc-cluster-in-a-single-system?forum=exchangesvrgenerallegacy#c6e08365-c01a-40aa-a8bc-94219757ef13
Blog |
Get Your Exchange Powershell Tip of the Day from here

1.1 performance problems related to system configuration?

It seems like a lot of people are having serious performance problems with Aperture 1.1 in areas were they didn't have any (or at least not so much) problems in the previous 1.01 release.
Most often these problems occur as slow behaviour of the application when switching views (especially into and out of full view), loading images into the viewer or doing image adjustments. In most cases Aperture works normal for some time and then starts to slow down gradually up to point were images are no longer refreshed correctly or the whole application crashes. Most of the time simply restarting Aperture doesn't help, one has to restart the OS.
Most of the time the problems occur in conjunction with CPU usage rates which are much higher than in 1.0.1.
For some people even other applications seem to be affected to a point where the whole system has to be restarted to get everything working up at full speed again. Also shutdown times seem to increase dramatically after such an Aperture slowdown.
My intention in this thread is to collect information from users who are experiencing such problems about their system configuration. At the moment it does not look like these problems are related to special configurations only, but maybe we can find a common point when we collect as much information as possible about system where Aperture 1.1 shows this behaviour.
Before I continue with my configuration, I would like to point out that this thread is not about general speed issues with Aperture. If you're not able to work smoothly with 16MPix RAW files on G5 systems with Radeon 9650 video cards or Aperture is generally slow on your iBook 14" system where you installed it with a hack, than this is not the right thread. I fully understand if you want to complain about these general speed issues, but please refrain from doing so in this thread.
Here I only want to collect information from people who either know that some things works considerably faster in the previous release or who notice that Aperture 1.1 really slows down after some time of use.
Enough said, here is my information:
- Powermac G5 Dualcore 2.0
- 2.5 GB RAM
- Nvidia 7800GT (flashed PC version)
- System disk: Software RAID0 (2 WD 10000rpm 74GB Raptor drives)
- Aperture library on a hardware RAID0 (2 Maxtor 160GB drives) connected to Highpoint RocketRAID 2320 PCIe adapter
- Displays: 17" and 15" TFT
I do not think, that we need more information, things like external drives (apart from ones used for the actual library), superdrive types, connected USB stuff like printers, scanners etc. shouldn't make any difference so no need to report that. Also it is self-evident that Mac OS 10.4.6 is used.
Of interest might be any internal cards (PCIe/PCI/PCI-X...) build into your system like my RAID adapter, Decklink cards (wasn't there a report about problems with them?), any other special video or audio cards or additional graphic cards.
Again, please only post here if you're experiencing any of the mentioned problems and please try to keep your information as condensed as possible. This thread is about collecting data, there are already enough other threads where the specific problems (or other general speed issues) are discussed.
Bye,
Carsten
BTW: Within the next week I will perform some tests which will include replacing my 7800GT with the original 6600 and removing as much extra stuff from my system as possible to see if that helps.

Yesterday i had my first decent run in 1.1 and was pleased i avoided a lot perfromance issues that seemed to affect others.
After i posted, i got hit by a big slow-down in system perfromance. I tried to quit Aperture but couldn't, it had no tasks in its activity window. However Activity Monitor showed Aperture as a 30 thread 1.4GB Virtual memory hairball soaking-up 80-90% of my 4 cpu's. Given the high cpu activity i suspected the reason was not my 2GB of RAM, althought its obviously better with more. So what caused the sudded decerease in system perfromance after 6 hours of relative trouble free editing/sorting with 1.1 ?
This morning i re-created the issue. Before i go further, when i ran 1.1 for the first time i did not migrate my whole library to the new raw algorithum (its not called the bleeding edge for nothing). So this morning i selected one project to migrate all its raw images to 1.1 and after the progress bar completed its work, the cpus ramped and system got bogged-down again.
So Aperture is doing a background task that is consuming large amounts of cpu power, shows nothing in its activity monitor and takes a very long time to complete. My project had 89 raw images migrated to the 1.1 algorithum and it took 4 minutes to complete those 'background processes' (more reconstituting of images?). I'm not sure what its doing, but it takes a long time and shows no obvious sign it is normal. If you leave it to complete its work, the system returns to normal. More of an issue is the system allows you to continue to work as the background processes crank, compounding the heavy workload.
Bit of a guess this, but is this what is causing people system's problems ? As i said if i left my quad alone for 4 minutes all returns as normal. Its just not normal to think it will ever end, so you do more and compound the slow-down ?
In the interests of research i did another project migrating 245 8MB raws to the 1.1 algorithum and it took 8 minutes. First 5mins consumed 1GB of virtual memory over 20 threads at average 250% CPU usage for Aperture alone. The last three minutes saw the cpus ramp higher to 350%, virtual memory increase to 1.2GB. After the 8 minutes all returned to nornal and fans slowed down (excellent fan/noise behaviour on these quads).
Is this what others are seeing ?
When you force quit Aperture during these system slow-downs what effect does this having on your images ? Do the uncompleted background processes restart when you go to try and view them ?
If i get time i'll try and compare to my MBP.

New Install of MSCS for an Upgraded Abap System

We are currently on NW04S ECC 6.0 on WAS 700 in a MSCS, Oracle 10g. Our problem is that we are moving to new hardware and our current system uses the old MSCS (which is an upgraded system originally installed at 4.7 640 (perhaps earlier (4.6c)), which to me means that the Central Instance resides in the MSCS in the SAP Group. Our plan is to install a clustered system and do a DB restore or copy over to the new hardware. I have done the install and realize now that the ABAP MSCS install for NW04s ABAP creates the cluster a little differently in that it looks like the Java (Portal) cluster. Only the SCS and enqueue are in the MSCS and the CI and all Dis are outside of the MSCS. This creates a problem for me in that the SCS is using the 00 system number, that on our old system the CI had, so our gui is now pointing to what would be the wrong system number, as it looks like the gui must point to to the CI system number for connection to the message server. So, I guess this means a reinstall for me and switching the system numbers. I also dont know exactly how high availability would be created in this new setup unless you put an application switch in front of your CI and Dis, like you would with the Portal, to direct gui requests. With the old MSCS the cluster would know if the CI failed and move it to the other node, but since it resides outside of the cluster, you have to have some type of external director right?

Hello Jack,
even you have upgraded from 6.40 to 7.00 you will need to convert to new HA structure according the note 1011190 to avoid the problems with next upgrade. In 700 the CI and DI are not the SPOF (see also
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8cd93-f1e9-2910-c186-86bfff3dac63">here</a>) and you can configure logon groups via the message server.
In case of hardware change better to take the system copy guide and install new HA architecture - it will save you manual conversion (SAP note 1011190).
best regards

Resoring prodution database into new installed sap system

have installed ecc 6.0 with sql server 2008 (sp 1) on windows 2003
server with 64 bit.
My installtion was done sussfully and also i started sap system.It
was working fine. then i took backup from my standalone system .
I restored prodution server database in standalone system and restore
was done successfully.
Then iam trying to login to sap system then it was saying that
dispature was stopped.
first dispatur was in yellow and status running message server
connection ok,dialuge que time 0;00sec,j2ee status info unavailable.
Iam sending screen shots and also related error log files attatched.
Please can you get help from those documents.
I also checked r3trans -d.
C:\Documents and Settings\Administrator>r3trans -d
This is r3trans version 6.14 (release 700 - 12.06.09 - 15:20:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = MSS --- SERER = 'SHURJO' DBNAME = 'PRD'"
r3trans finished (0012).
before doing prodution database restore is compulsary to i have to increase the patch levels of my new installed system
because my prodution server abap& basis patch levels are 19 and my installed system it is only 14.
Please can any body give right way to resolve this problem,
Regards,
Krishna

> before doing prodution database restore is compulsary to i have to increase the patch levels of my new installed system
> because my prodution server abap& basis patch levels are 19 and my installed system it is only 14.
First: It's pointless to first install a full system and then try to overwrite the database with another one.
I would INSTALL the system using the database copy.
This procedure is call "homogeneous system copy" and there's a guide for that available at http://service.sap.com/instguides and also in "Note 151603 - Copying an SQL Server database".
The error message is coming because the database has not the proper users, you'd need to run the STM tool to adapt the users and the environment. Those steps are all described in detail in the guide.
Markus

Elements 12 crashes in organizer every use. Not unique to 12 an on going problem from 9 forward. This is a new install via download, win7 64 bit.

A long time elements user from the original. Crash problems have escalated since elements 9 to be beyond annoying. Reading Adobes' own forums, it is apparent I am not alone, also apparent Adobe cannot fix the problem. Most disappointing. A new download, from Adobe, crashed on 1st attempted opening of organizer; nor could the organizer see my card reader, once operational. Other programs experience no such problems. This post is more a frustration vent, than an expectation of solution.
Thought I would give Adobe a 2nd effort to rectify/explain. Initiated an on line chat with service rep. Wasted 20 minutes with babble accomplishing nothing. Was transferred to a tech rep. they asked same questions, and while I was typing in details, they severed the connection. I wish anyone considering a purchase of any Elements version the best of luck .Elements woes have for me been spread across 2 new computers and 3 versions of the program. There will not be another.

Hello John
Have you already got some answer from Toshiba?
What to say my friend? In my opinion the best advice you can get from Corel and Adobe. They have best experience with own product and have probably tested them on different hardware platforms.
Notebook manufacturers offer different notebook models with different hardware configurations. Some of them are cheap and offered with average hardware. The performance is not the best but good enough for every day activities like internet, office, mailing and so on.
On other hand there are notebooks with excellent and powerful hardware. Very often such notebooks cost twice as much as cheap low budget products.
Please dont understand me wrong but your C notebook is not the best one for usage with such powerful software.
I really dont know what Toshiba can do about it. I can imagine that you need other graphic driver but graphic driver support for mobile computers is pretty limited and I dont think you can do much about that.
What you can try is to download and install driver from graphic card manufacturer but you must do this on your own risk.
Sorry friend but I dont have any other advice for you. I just think youve bought wrong notebook for such complex graphic operations. 2 GB RAM? I dont know.
Good luck.

Creating cofiles for single system configuration

Hi All,
we have sandbox system where it's congifured like single system in STMS.
when we try to release the requests it's showing local object request number relesed but i am unable to find the cofiles and data files at os end.
Since our system in configured as single system with out target system cofiles will not be created, but i have tried with virtual system and create the transport route but still unable to find the cofiles.
Is there any way to make cofiles available at OS end for single system configuration which having one physical system and one virtual system ....
Please suggest..
Thanks,
Subhash.G

Hello John,
Please go through my weblog:
<b>Configuring ESS in SAP Enterprise Portal 6.0>
Hope this may solve your problem.
Best Regards,
Srinivas.

Problem with a new install: X, Radeon 4650, and xf86-video-ati

Hi guys,
I am trying to setup a new install here but am getting stuck at X (I have been following the beginners guide).
Everything is stock (kernel, not [testing], etc.).
I have a ATI Radeon HD 4650 and am using the xf86-video-ati driver. I want to use dual monitors with this card (one 1920x1080 and another 1680x1050), but as far as I can tell, this is not the root of the problem. KMS is enabled by default and works well (with the exception of some slight artifacts on the 1080p monitor). I have tried to disable KMS but to no avail. But here is the essence of my situtaion:
Note: Yes, hal & dbus are both running.
Running X as root without Xorg.conf: Mirrored at 1680x1050
Running X as root with Xorg.conf: Black screens
Running X as normal without Xorg.conf: Mirrored at 1680x1050
Running X as normal with Xorg.conf: Black screens
Note: The Xorg.conf is being taken from X -configure as well as taken from Xorg.0.log
My /var/log/Xorg.0.log can be found here: http://pastebin.ca/1877044 (after attempting to run X as a normal user without Xorg.conf)
Why can't I use a xorg.conf? How can I setup dual displays at their native resolutions?
Thanks, any help is greatly appreciated!

oh boy ...been in your exact situation before. I have a radeon 4890 HD. Very easy to get running the way you want it, once you know the steps to take of course.
btw, I've ALWAYS found it easier to run X with an xorg.conf file.
The way you go about setting up a dual head radeon card is actually very simple.
First, delete your /etc/X11/xorg.conf file if you have one.
Second, run "sudo aticonfig --initial=dual-head"
Third, make sure the fglrx module is mentioned in your rc.conf file under modules.
aticonfig will then create a new xorg.conf file for you that will work with your dual head.
A few tweaks to the xorg.conf file before you start x:
Decide whether you would like to run Xinerama or not. Xinerama may or may not have any benefits, but I've had much more success by keeping it off.
You do that by:
Section "ServerFlags"
Option "Xinerama" "off"
EndSection
Make sure 'Load "dri2"' and 'Load "dri"' are commented out under section 'module'
Lastly, specify your display size under Section "Screen" (you should have two screen sections)
Do this by adding Modes "1920x1080" under each SubSection "Display" .... or just take a shortcut and put it under the last subsection like I did.
Do it again for the your other screen section.
You are going to make a "virtual" screen, which would exist if your two physical screens were joined into one big one.
So put under your second "screen" section, Virtual 3360 3360 (I have two 1680x1050 monitors)
attatched is my xorg.conf for clarification:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "aticonfig-Screen[0]-0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "dri2"
# Load "dri"
Load "record"
Load "extmod"
Load "glx"
Load "dbe"
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "0-DFP1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1680x1050"
Option "TargetRefresh" "60"
Option "Position" "1680 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-DFP2"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1680x1050"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "AudioStreamSilence" # [<str>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "LowPowerModeEngineClock" # <i>
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "RV790 [Radeon HD 4800 Series]"
BusID "PCI:2:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "Monitor-DFP1" "0-DFP1"
Option "Monitor-DFP2" "0-DFP2"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Virtual 3360 3360
Depth 24
Modes "1680x1050"
EndSubSection
EndSection

New install qt player 7 says configuration incorrect. Reinstall. Have 3 times

New install qt player 7 says configuration
incorrect.
Reinstalled 3 times

In addition to checklists provided by Josh; I would suggest you to perform a repository scan of the system to identify whether any objects were not installed properly and there might be a possible corruption. Use the link mentioned below to perform repository scanning.
How to use Repository Diagnostic Tool - Business Intelligence (BusinessObjects) - SCN Wiki
You can try to repair the install. Also as this is a new install you can directly go for re-installing the software.
PS: Try to re-download the software from the service market place rather than copying the installer from existing one.

Install problems - Java Enterprise System Directory Server on AS3.0

I'm trying to get the new 5.2p3 version of the DS installed, using the Java Enterprise System installer, but am having some problems. I've attempted to install this one two separate systems, both running RHEL AS3.0 Update 4 - one worked great, the other not so much.
On the system that failed, the install reported success, but it failed to create the appropriate directories for the instance (slapd-<instance>) or the scripts for the admin server (start-admin, stop-admin). It's like it's not actually creating the instance properly on this system (even though it works properly on the other).
Has anyone run into this, or have any ideas how to get this to install properly? I'm fairly new to this software, but this is driving me insane - two similar systems, same OS, very different results...
Any help would be most appreciated...

I had a similar problem with SuSE. You might want to make sure that no JRE is installed prior to your 10g Forms and Reports Server installation. I got rid of the OS installed JRE, and the 10g installation went fine.

Problem Configuring Single-System TMS in new install of SM 7.1

Similar Messages

Maybe you are looking for