Problem confiugring IGS
HI All
I am trying to develop Business Graphics appliction using
Business Graphic UI element
Inorder to do this I need to configure the INTERNET GRAPHICS SERVER in the VISUAL ADMIN TOOL
In the process of configuring INTERNET GRAPHICS SERVER I need to enter the IGS URL...
Where can I find the IGS URL ?
thanks in advance
Hi,
Go to your configuration tool ,
1.Click on Connect to SAP J2EE Engine.
2 Enter the username & password & Login
3.Go to J2E Cluster -> Configuration Adapter -> sap.com -> tcwddispwda -> propertysheetdefault
4.It will display you Change Configuration screen ,Select "IGS URL" option from that.
5.Enter the IGS URL to http://<portal server hostname><instance number>
6.Exit from visual Administrator window
7.Finally Restart your J2EE server.
This will configure your IGS server.
Best Regards,
Shital.
Similar Messages
-
Dear Experts
I have a strange problem with IGS
My IGS server is running perfectly when I execute SIGS at my server system and also thrw Http link, and in GRC also
But when I tried to execute the same tcode SIGS from internet thrw another system it is blank.
Even risk terminator also blank due to that.Explain what you meant by internet thrw another system?
IGS is integrated into the SAP kernel and make sure your kernel files are intact when compared to your server with another server you quoted.
Check the program name is IGS.<SID of the SAP instance> in the RFC dest IGS_RFC_DEST & GFW_ITS_RFC_DEST. -
Hi people,
I have got a WAD with some Graphic and suddenly started an error about IGS. I don´t know what the reason for that...
The message error is "Internal error in communication with the IGS (partial diagrams)"
Message number is RSWWW 005.
Someone have some idea about that?
Thanks.Hi Java man,
Regarding your case ..
To ensure this problem is caused by IGS, you can go to tx: RSRT, then go to IGS Test.
If it's error, yes it's caused by IGS.
Usually to overcome this problem, i asked the basis team to restart the server.
Then after that, you can check the IGS again with the above technique again.
Hopefully it can help you a lot ..
Regards,
Niel.
thanks for the points you choose to assign. -
Hi,
we want to see graphics in our CRM 2007 system (ABAP only) from values that are fetched from our ERP System (ABAP plus Java, Kernel 7.00).
We can fetch the data from the ERP System without any problems, but when we want to see the graphics, we get the error message " RFC-link to graphics server does not exist".
We did the following tests:
RFC connection and testjob for the graphic server in the CRM system are working without any problems.
RFC connection and testjob for the graphic server in the ERP system are working fine, too. Als the java part is customized and semms to be ok.
For me it is not quite clear which graphic server will be used to display the data, that one from the CRM system or from the ERP system?
Regards
Ulrike Tubbesingעיחיחןלכלןעל
-
HI All
I am trying to develop Business Graphics appliction using
Business Graphic UI element
Inorder to do this I need to configure the INTERNET GRAPHICS SERVER in the VISUAL ADMIN TOOL
In the process of configuring INTERNET GRAPHICS SERVER I need to enter the IGS URL...
Where can I find the IGS URL ?
thanks in advanceHi,
The default IGS port is 4XX80 when XX is the system number, so for system number 00 the port would be 40080.
You can also use transcation SIGS to find out the IGS port.
Regards,
Nahum -
Special characters in legend for graphics (IGS ?)
hi all,
has anybody an idea why special characters like
ä, ü , ö ...
dont appear in the legend-text when viewing
graphics for bex-queries ?
in table view evertything is OK. maybe something missing in the IGS configuration ?
we're using language = DE and sap bw 3.5
tanks for all helping answers.Hi,
We had one similar problem, where IGS was not showing the category axis text in right form. It got resolved by applying the additional fonts in IGS.
By default, IGS does not have all the fonts. So, if your font is missing, it will not show the graphics in right form.
Also, please check that you are using the latest front end components.
Here are some important notes to refer:
844012 Chart migration 3.5: Implementation
653249 Chart only generates column graphics
596825 Configuration of the GFWCHART IGS interpreter
Hope it helps.
Praveen -
IGS rfc not working BI 7.0
Hi All,
We have upgraded our BWD system from 3.5 to 7.0, in smicm restart j2ee server option is disabled only Icm restart option is enabled. I have checked the services both the SMTP and HTTP are active and HTTP is activated as External also.
I have checked the Http server ->display data: it's showing that ABAP and J2EE configured true but J2ee server operational = false.
If j2ee server is not working plz suggest me how to start the j2ee server.
If j2ee server is not working does IGS RFC work ? presently we are facing the problem with IGS rfc we have given the paramters according to note 844669 in instance profile still no luck .... please suggest..
Thanks,
Subhash.G
Message was edited by:
subhash gaddeHi Markus,
We have fixed the IGS problem the RFC IGS pointing is wrong destination.
We have given the program IGS.Pjazzsap6 in the RFC destination.
I do not have any information about Pjazzsap6 exactly what does it mean?
our EP dev server which is connecting to BWD is pointing to Pjazzsap6 in IGS destination . Is Pjazzsap6 is kind of program file ? please suggest...
Thanks,
Subhash.G -
How to stop and start IGS(internet graphic server)
Hi Techies
How to stop and start IGS(internet graphic server) in Solaries
IGS is 7.0 1patch
Is this the command to stop and start IGS
stopigs and startigs
If this correct will there be any issues if i stop the IGS from the above command
Thank You
HaroonHoi Haroon
On base 6.40 there were stopigs/startigs scripts, yes. When we upgraded our systems to 7.0 I encountered the same problem, the igs could be stopped, but not started anymore (externally). Can you check, if the startigs/stopigs-scripts are 7.0 or 6.40.
I then opened an oss and got as answer:
"To start and to stop the igs there's only the offical way by stopping and starting the sap system".
However I found a solution to start and stop:
start:
nohup /sapmnt/<SID>/exe/igswd_mt -mode=profile pf=/usr/sap/<SID>/SYS/profile/<Instaneprofile> &
e.g.:
nohup /sapmnt/P72/exe/igswd_mt -mode=profile pf=/usr/sap/P72/SYS/profile/P72_DVEBMGS01_migzmc10 &
stop:
--> stopigs, therefore the 6.40-stopigs script has to remain in the exe directory.
Hope this helps.
Regards Patrick -
Geo Maps - Graphics rendering problem
Hi Experts,
I got this error while running an Application with Geo Map.- " Graphics rendering problem"
In my application there are two UI elements ,
Geo Map and Business Graphics, i can see business graphics properly but problem is only with GeoMap.
I checked the SAP Note : 704604.
And the entry in my Visual Admin is : http://localhost :40180
When i go to the URL http://<server>:4<instance>80 , i get the message displayed as "SAP IGS is running"
I am unable to figure out the problem can you guys help?
regards,
Ashish ShahHello Ashish,
There must be some problem with IGS server. So check whether your IGS server is configure properly or not.
Follow these steps:
1. Check the path first
Local Drive : \ usr \ SAP \ J2E \ JC01 \ J2EE \ admin
2. Connect to SAP J2EE Engine
3.Open the Visual Administrator Window, In Global Configuration page ,go to
CONFIGURATION ADAPTER -> WEBDYNPRO -> sap.com - > tcwddispwda -> propertysheet.default
4. Switch to edit mode
5.Change property entry , http://<server name: port number>
6.Exit the visual Administrator window
7.Restart J2EE Engine.
Best Regards,
Sheetal.
Edited by: Shital Patil on May 1, 2008 3:11 PM -
Hi SDN,
I am installing SAP R/3 Enterprise ABAP + Java Add In on Windows & Oracle as Database.
The ABAP engine installation went smoothly but when I tried to install J2ee engine (Central Services Instance) the J2EE engine did not start which is the last step during the installation process & I got the following error <b>"SAP Basis System: Operating system call recv failed (error no. 10053) & SAP Basis System: Operating system call recv failed (error no. 10054)"</b>.Therefore I tried to uninstall only the Central Services Instance & tried to reinstall it.
But now I am facing a new problem, the IGS Watchdog in the Central Instance which was running smoothly is not starting up now & the error message recorded on the Syslog is the same as above.
Do I need to re-install the whole thing again or is there some way that I can resolve this.
Thanx in Advance,
Jeetendra Kumarhi,
When I install R3470*200
I meet the same problem
Refer to note 824281, I solved my problems.
the solution of 824281 are:
Solution
You can manage long parameters with variables in the instance profile.
The online documentation contains a description of this.
Excerpt from the DOCUMENTATION:
Parameter values in instance profiles can contain the following
variable s. '$(parameter name)' is replaced by the value of the
parameter name in brackets.
Example:
Param1 = '/usr/sap/C11/D53/dbg'
Param2 = $(Param1)/stats
This results in
Param2 = /usr/sap/C11/D53/dbg/stats
Regards
Sheng -
IGS watchdog process doesnt startup
Hello,
we are making a security test to our SAP system, and we are encountering
problems with IGS watchdog, which is not starting up.
It worked well until we tried to exploit the vulnerability exposed on
the CVE-2006-4133:
"Heap-based buffer overflow in SAP Internet Graphics Service (IGS) 6.40
and earlier, and 7.00 and earlier, allows remote attackers to cause a
denial of service (crash) or execute arbitrary code via an HTTP request
with an ADM:GETLOGFILE command and a long portwatcher argument, which
triggers the overflow during error message construction when the
_snprintf function returns a negative value that is used in a memcpy
operation."
After sending a packet with a long value, our igs service crashed. This
is the expected result, but after rebooting the server, the igs watchdog
service doesn't startup.
After that, we have process the syslog entries that we have at the
SAPMMC, and we have encountered errors at the database. The error is
8115 and seems to be related to an arithmetic overflow. We believe that
its a consequence of the proof of concept that we have done.
Can anybody help us?
Lots of thanks and best regards.Hi Maria,
a bit more details from your system would help me finding out why the IGS doesn't start. But in my opinion this has nothing to do with the database issue. You may find some information in the stderr or sapstart log files in DIR_HOME.
Regards
Matthias -
IGS COnverted BMP Image upload problem in SE78
HI Friends,
I Converted the JPEG image into BMP ormat by using IGS. It is converting properly. i am able to see the BMP image. When i am trying to upload it through the SE78 i am getting the short dump.
If convert it manually, i am able to upload the image. i did not get the any difference between these two including file size, width and height.
I attached the shortdump and converted image file as an attachment. Can anyone give me inputs where i am missing the target.
Runtime error : COMPUTE_INT_TIMES_OVERFLOW
Exception : CX_SY_ARITHMETIC_OVERFLOW
Thanks ,
Srinivas BhavanamHi Oisin,
Sorry for the Late Reply. I am using IGS 6.40 with solaris system.
If i am converting the image from my desktop i am getting 96DPI resolution. Where as if i am doing it from IGS i am getting 30682172 DPI resolution.
I am using SAP 4.7. Is it the latest patch level or latest IGS supported.
Short Dump :
Runtime Error COMPUTE_INT_TIMES_OVERFLOW
Exception CX_SY_ARITHMETIC_OVERFLOW
Occurred on 03.03.2010 at 11:04:30
Whole number overflow on multiplication.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLSTXBITMAPS" had to be terminated because one of
the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_ARITHMETIC_OVERFLOW',
was neither
caught nor passed along using a RAISING clause, in the procedure
"FILL_BMFILE_FROM_BMP" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
In the current program "SAPLSTXBITMAPS", multiplying the numbers 1207959552 and
100 (using the operation * or 'MULTIPLY') resulted in a value
greater than 2147483647 or smaller than -2147483648. This
results in a whole number overflow.
How to correct the error
The exception must either be prevented, caught within the procedure
"FILL_BMFILE_FROM_BMP"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
You may be able to split the process into separate components, so that
the values generated are smaller.
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "EWR0R3DEV002"
Network address.......... "10.20.32.13"
Operating system......... "SunOS"
Release.................. "5.9"
Hardware type............ "sun4u"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "EWR0R3DEV002"
Database type............ "ORACLE"
Database name............ "I07"
Database owner........... "SAPRGG"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Mar 9 2009 21:04:19"
Created in............... "SunOS 5.8 Generic_117350-38 sun4u"
Database version......... "OCI_920 "
Patch level.............. "274"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "SunOS 5.8, SunOS 5.9, SunOS 5.10"
User, transaction...
Client.............. 999
User................ "SREDDY"
Language key........ "E"
Transaction......... "SE78 "
Program............. "SAPLSTXBITMAPS"
Screen.............. "SAPLSTXBITMAPS 4001"
Screen line......... 8
Information on where terminated
The termination occurred in the ABAP program "SAPLSTXBITMAPS" in
"FILL_BMFILE_FROM_BMP".
The main program was "SAPMSSCH ".
The termination occurred in line 1959 of the source code of the (Include)
program "LSTXBITMAPSF03"
of the source code of program "LSTXBITMAPSF03" (when calling the editor 19590).
Processing was terminated because the exception "CX_SY_ARITHMETIC_OVERFLOW"
occurred in the
procedure "FILL_BMFILE_FROM_BMP" "(FORM)" but was not handled locally, not
declared in the
RAISING clause of the procedure.
The procedure is in the program "SAPLSTXBITMAPS ". Its source code starts in
line 1843
of the (Include) program "LSTXBITMAPSF03 ".
Source code extract
019290 endcase.
019300 * compression
019310 perform bmptab_getdword_ofs tables bitmap_file
019320 using ofs bmp_compression.
019330 case bmp_compression.
019340 when c_bmp_compr_rgb. "BI_RGB, uncompressed
019350 when c_bmp_compr_rle8. "BI_RLE8, 256 colors colormap, rle encoding
019360 when c_bmp_compr_rle4. "BI_RLE8, 16 colors colormap, rle encoding
019370 when others. message e872 raising bmperr_unsup_compression.
019380 endcase.
019390 * size of image
019400 perform bmptab_getdword_ofs tables bitmap_file
019410 using ofs bmp_sizeimage.
019420 * pix per meter X
019430 perform bmptab_getlong_ofs tables bitmap_file
019440 using ofs bmp_xpelspermeter.
019450 * pix per meter Y
019460 perform bmptab_getlong_ofs tables bitmap_file
019470 using ofs bmp_ypelspermeter.
019480 * colors used
019490 perform bmptab_getdword_ofs tables bitmap_file
019500 using ofs word.
019510 * colors important
019520 perform bmptab_getdword_ofs tables bitmap_file
019530 using ofs word.
019540 ofs_rgbquad = ofs_bitmapinfoheader + bmp_bisize.
019550 * now we have OFS_RGBQUAD -> color table
019560 * OFS_BITMAPDATA -> bitmap bytes
019570 otf_bminfo-new_rd_format = c_false.
019580 otf_bminfo-is_resident = c_false.
> otf_bminfo-dpi = ( bmp_xpelspermeter * 100 ) / 3937.
019600 perform bmp_adjust_dpi using otf_bminfo-dpi.
019610 otf_bminfo-w_pix = bmp_width.
019620 otf_bminfo-h_pix = abs( bmp_height ).
019630 otf_bminfo-w_tw = ( 1440 * otf_bminfo-w_pix ) / otf_bminfo-dpi.
019640 otf_bminfo-h_tw = ( 1440 * otf_bminfo-h_pix ) / otf_bminfo-dpi.
019650 case bmp_bitcount.
019660 when 1.
019670 otf_bminfo-bitsperpix = 1.
019680 otf_bminfo-bytes_per_row = otf_bminfo-w_pix div 8.
019690 rest = otf_bminfo-w_pix mod 8.
019700 when 4.
019710 otf_bminfo-bitsperpix = 4.
019720 otf_bminfo-bytes_per_row = otf_bminfo-w_pix div 2.
019730 rest = otf_bminfo-w_pix mod 2.
019740 when 8.
019750 otf_bminfo-bitsperpix = 8.
019760 otf_bminfo-bytes_per_row = otf_bminfo-w_pix.
019770 rest = 0.
019780 when 24.
Thanks & Regards,
Srinivas Bhavanam -
IGS Graphics Rendering Problem
Hi experts,
I have the following problem with the igs:
I have 2 applications with business graphics technicaly the same.
Both worked fine with the same igsURL, but lately one of them is showing "Graphics Rendering Problem"
Can You tell me please where else can be the problem? The SAP IGS is running, and the URL is the same for both of my apps, obvious the problem is in the app but Idon`t have an idea where to look
Thanks in advance
Z.Hi,
This problem can also be caused when proper values for
Series and category are not bound..
Make sure you filled the dataNode with values..
Regards
LN -
IGS Config Problem: ListenerRfc::Abort - Help Please!
Hello,
I've been working with getting IGS installed and working and can't figure out what's wrong. the install came back successful. I've gone through and fixed, and tested, my SM59 definitions. Gone through OSS and looked at the recommended notes, etc. (all the usual stuff). Now I'm getting desperate!)
Here's the message our app gets via the www query trying to get graphs:
"IGS: Error When Calling Up IGS (ListenerRfc: unknown error)"
Here's what I've done to date:
1. re-installed it (on my BW C/I - same host - which is an ABAP instance ONLY)
2. corrected the default SM59 defintions (set them to what's spec'd in the igs.xml file) and tested them out.
3. manually started and stopped it
4. In troubleshooting the MUX - here's what I get from the log mux_"sap-bid1.trc"
[Thr 3342] Sat Dec 24 10:49:08 2005
[Thr 3342] [ListenerRfc::Abort] Aborted
[Thr 3342] [ListenerRfc::Cleanup] Cleaned up
[Thr 258] [ListenerRfc::DispatchRfc] returned with Abort()
Which tells me my ListenerRfc isn't "hearing" the request for graphics yes?
So how to I configure it - ListenerRfc - if that is indeed the problem?Resolved - AFTER IGS patch 10 application, IGS was looking for gfwchart (versus gfwchart.tpl - see below)
Fixed it by renaming the file...
sap-bid1:bidadm 10> more chart_11054d91098584_5.trc
Can't find config file /usr/sap/BID/DVEBMGS00/igs/conf/gfwchart
sap-bid1:bidadm 11> cd /usr/sap/BID/DVEBMGS00/igs/conf/
sap-bid1:bidadm 12> ls
dev_sapstart gfwchart.tpl igs.xml xmlchart.tpl -
IGS Watchdog Monitoring problem
Hello all,
I am trying to monitor the OS process IGS_Watchdog in my solution manager in Tx RZ20. But this has no result yet - it is grayed out. There are 3x 7.00 systems in this landscape and all of them aren't working. The 6.40's however are functioning perfectly.
I see that there is no IGSWD_MT running on OS level. I have also found that there is no IGS.XML file in the /conf directory (usr/sap/SID/DV*/igs/conf) Furthermore I have tried to start it with 'igswd_mt pf=<profile dir+profile>' this is giving me the following errors:
***LOG Q0I => NiIBindSocket: bind (125: Address already in use) [nixxi.cpp 3227]
ERROR => NiIBindSocket: SiBind failed for hdl 0 / sock 6 (SI_EPORT_INUSE/125; I4; ST; 0.0.0.0:40001) [nixxi.cpp 3227]
***LOG Q0I=> NiIBindSocket: bind (125: Address already in use) [nixxi.cpp 3227]
ERROR => NiIBindSocket: SiBind failed for hdl 0 / sock 5 (SI_EPORT_INUSE/125; I4; ST; 0.0.0.0:40002) [nixxi.cpp 3227]
tech info:
os: Solaris 64bit on sparc
Instance no: 00
Can someone help me with this issue? thanks in advance
Jeffrey de Haan
Edited by: Jeffrey de Haan on May 18, 2009 3:23 PMHi,
This problem can also be caused when proper values for
Series and category are not bound..
Make sure you filled the dataNode with values..
Regards
LN
Maybe you are looking for
-
How can I get an mp3 into the music section on iPad without using a computer?
The situation is this: I have no access to a computer. The iPad is all that I have to use. So I have never synced it to iTunes or anything. I am trying to make a video using the movie making app Pinnacle Studio (iMovie doesn't do enough for what I wa
-
When will we see the Thunderbolt to FireWire adapter?
The keynote mentions it but only the gigabit Ethernet adapter is available. It's mentioned on the ThunderBolt page http://www.apple.com/thunderbolt/
-
Creating objects using reflection
Hi, I need to construct a new instance using reflection and passing parameters. If the parameters are of primitive type ex. int, how can I pass them in the Class[] type of object
-
Help me change the background image
I just installed my copy of iWeb. The first thing I did after selecting a template was try to change the background. I hit the inspector button, found the tab with the background stuff, selected image fill, fit to size, and chose my photo. And nothin
-
Select multiple photos in Mail
I recently upgraded to Mavericks. Now, when I have a Mail (ver. 7.3) message with multiple photos, I can only seem to select one photo at a time. I used to be able to Command-Click to select as many as I wanted, and easily drag them into another emai