Problem connect to a wifi network PEAP
Hi
Since OS 2.1 on my playbook, I cannot connect to my PEAP with MSCHAPV2.
It was working on OS 2.0.
I'm now using OS 2.1.0.1314 and the problem is still here.
The playbook connect to the wifi, when I open a browser I must login with my user name, but this part doesn't work.
I get a error "Network error'.
When we use the appworld, a windows popup a little bit different that the other and it work when we use the same user and password.
I can get you some screen shot if it will help you.
Thanks
Hi
I try it and the problem is still here.
When I go to browser I have this screen
https://docs.google.com/open?id=0B7HzFnxiPS2PNlNxWEV2bk8tMUk
Then this error:
https://docs.google.com/open?id=0B7HzFnxiPS2POERWXzRjWENRaXc
When I go to appworld I have this screen.
https://docs.google.com/open?id=0B7HzFnxiPS2PRlc0V3Q1bXUxSlk
And it works
Similar Messages
-
When iBooks has a problem connecting to a wifi network, it hangs and the page goes blank
i use the books I have in iBooks as study aids, a lot. I find that when I am in the vicinity of a new or busy wifi network that the page or bookshelf just goes blank, I have to switch wifi off and restart the app, then it works again. It is most annoying though.
Reboot router, make sure it's up to date. If on wifi try ethernet. Make sure DNS is set to automatic (settings - general - network).
-
My new Macbook won't connect to my wifi network - it keeps saying "password incorrect" - but I've tested it on my phone and works fine, I've checked the password I enter is correct digit for digit - what could the problem be?
you need to open the keychain access located in your utilities folder in the applications and once in the keychain on the left side click on the words system at the top and in the lower section click on passwords
next look in the striped area for any passwords that say airport network password next to kind and highlight those and hit delete on the keyboard to remove them from the keychain.
once you remove all of these airport passwords, quit the keychain
turn wifi off then back on, select your wifi network from the list and enter the password telling it to save to keychain this should resolve your issue! -
I have a problem with my iPad 1 st. the problem is that I unable to locate even when connected to a WiFi network and the location is activated and restore and same thing happens .. may be I need help!
Thank you ...!Hi there beni_m,
You may find the troubleshooting steps in the articles below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
Android ver 5 problem Connecvtivity witch Cisco WiFi Network
Hello
All our developers that upgraded their Nexus devices from Android version 4 to Android version5 , can't connected to Office Network using PEAP or EAP-TLS authentication even Radius logs show that authentication was successfully. On the same time Mobile devices with Android 5 can connected to Guest WiFi network without any problem
Our WiFi Network use
Cisco WiFi Controller version 7.2.110.0
Cisco WiFi AP 3502
I also attach client debug information from controller
Does any one have successfully experience with Connection Android 5 to Cisco WiFi Infrastructure by PEAP or EAP-TLS
Thank you for any help and information's
Victor.Thank you very much for your help.
I have opened TAC .
There are problem on the version 7.2.110.0 that I use on my controller
Bug CSCua29504
https://tools.cisco.com/bugsearch/bug/CSCua29504
Currently I used Workaround solution
Use WPA/TKIP or WPA2/TKIP instead. Note that this will limit the client
to 802.11g/802.11a data rates.
I am Planning Upgrade Controller on the next week. to new version. -
I am having problems connecting to home wifi. It was working, but now all I get is a blank white screen. I re-booted with no success.
Hi, blank white screen where exactly?
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK. -
Hello all, I could use some help with my iPhone 4, I hope this is the best place to ask!
The Problem:
I want to do a full backup of my iphone to either itunes or to icloud. Unfortunately the iphone got wet and isn’t working properly. The phone turns on and still works, but the touch screen no longer works. I have a passcode lock on the phone so iTunes will not allow me to backup it up until I type in the passcode (which I cannot physically do). WiFi had been turned off before it got wet so it won’t connect to any known WiFi networks either to backup automatically to iCloud.
What happened:
I had been travelling for 6 months and went tubing on a river with my iphone in a dry bag. Unfortunately the dry bag failed and filled with water ruining my iphone.
What I’d like to do:
It’s an old phone and I was planning on buying a new iPhone anyway. I would love to do a full backup to either iCloud or to my computer so when I get a new iPhone I don’t lose anything. I’ve already connected it to my PC and downloaded all the photos and videos off the phone so at least I haven’t lost that, but I would like to be able to recover all the text messages, WhatsApp messages and notes I had created during my 6 months of travel.
The last time it was backed up to my pc or to icloud was in April, so there are 6 months worth of very meaningful data I would love to keep to remind me of my travels!
Is there anyway to force a full backup of the iPhone without typing in my passcode lock or is there anyway to force it to connect to a WiFi network so the phone can backup to iCloud??
iTunes recognizes the phone just now and I tried upgrading the phone to iOS7 in the hopes that it would first backup and then upgrade. Unfortunately all that happened is the phone upgraded to iOS7, but it didn’t backup to iTunes. Now the phone is stuck at the iOS7 welcome screen and I can’t do anything else with it.
Any ideas or tips would be welcome!
NOTE: This is NOT a jailbroken iPhone.If there is no other way around this, is there anyway to completely wipe the phone then??
The Apple store agreed to give me a new iPhone 4 as a warranty replacement for $150 (I travel a lot and I have a factory unlocked phone, so this is still worth it for me). But before I trade it in, I would like to make sure all my data is backed up on the device first.
When I try and restore the phone now on iTunes, it says I have to turn off Find My iPhone on the phone first before I can restore it. Now since I can't use the screen I can't really do that.
So how do I completely wipe the iPhone???
Thanks! -
Can't Connect to any WiFi network
I just got my iPhone yesterday and I'm already having a serious problem,I can't connect to any WiFi networks.
I can see the networks around me and I can select networks that I've setup and I know are open or I know the security passwords, I can even enter the network passwords for the ones that require them and it accepts them without complaint. When I select a network I get a little check mark next to that network which I assumes means it should be connected to that network. However, the iPhone never actually connects to them, i.e. no IP address, no router no nothing in the network settings screen for each network, and always appears to the using the Edge wireless network when accessing the internet.
I've tried DHCP and static IP but neither works.
I updated the phones software to 1.1.4, has anybody reported problems like this with this or any version of the software.
Any help would be much appriciated.
If I can't get this resolved today I'm returning to the AT&T store tonight for a new one.
Thanks
Matt S.theevilone,
I have personally used an iPhone with routers from D-Link, Netgear, Linksys, Apple and Belkin.
Some routers, regardless of manufacturer need to have their firmware updated. Generally speaking if you look at the release notes, the same updates that resolve issues with DHCP for game systems and PDAs, also resolves them for the iPhone.
In addition hardware or MAC address filtering can cause issues where you connect to the network and not get DHCP.
Hope this helps,
Nathan C. -
Hi
When I try to connect to my wifi network I receive message "Unable to join network "Netgear" this starated as of 8/16 before thsn I never had this problem
connecting to this network previously .I have attempted after manually entry of DNS still nothing a;so did the network reset, and full reset of settings and still
get nothing I even have my network unsecured at this very moment still nothing changed it does not show the network info ; no DNS address or anything any suggestions- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points -
After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home (this is the network I used to update the phone). My iPad however does not seem to have any problem connecting. I have restared the phone, toggled the router, re-entered the network password but there's still no connection.
When your device is trying to connect to the work Wi-Fi network, go to Settings > Wi-Fi > then tap on the name of the Netowrk that she is having trouble with. Then tap on forget this network. Let the device attempt to connect again and make absolutely sure she is trying to connect to the work network and not a nearby network, then make absolutely sure the password is entered correctly.
-
I can't connect to the router in my home. The Ipad seeks the network but nothing happens. I went to school and connected to their WiFi network as usual with no problems. When I returned home I could not connect to my home router. The Ipad seeks the router number but nothing happens. I rebooted the Ipad a few times in the school. The numbers identifying the router, etc. on my Ipad no longer appear there.
TThe Ipad guide says to connect to the WiFi use setup but I can't find the setup program in the Ipad.
I reset the network settings to the factory defaults but this doesn't fix the problem.
What can I do to reconnect to my home router?Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
How to authenticate using PEAPv1 (EAP-GTC) to connect to a wifi network in iPad 3?
The iPad in Business deployment senario guide says that we can connect to a wifi network using the PEAPv1 (EAP-GTC).
But when we try to connect it, there is no option to choose that authenticaion method.
Also, when we try to create a profile using iPone Configuration Utility, there is just PEAP available (by default PEAPv0 (EAP-MS-CHAP v2)).
It is very important for me as my organisation allows only PEAPv1 authentication and I'm not able to connect to its wifi network.
Thanking all of in anticipation.Link for iPad in Business -
http://images.apple.com/ipad/business/pdf/iPad_Deployment_Scenarios.pdf
Link for iPhone Configuration Utility -
http://support.apple.com/kb/DL1466 -
Mac NOT automatically connecting to preferred wifi network
Hi,
I am facing a problem with OS X 10.9.1 (Mavericks) wifi connection.
I use a Time Capsule as a base station and 13" Macbook Air (2012). The base station is connected to the internet through a PPOE connection.
Here are the details.
Since upgrading to OS X 10.9.1, my Mac automatically connects to preferred wifi network ONLY WHEN the wifi is available at start up or when the Mac wakes up from sleep, but NOT OTHERWISE.
Before the upgrade, the Mac automatically connected to the preferred wifi network not just at start up, but whenever the wifi became available.
In other words, after the upgrade, if I boot up the Time Capsule base station and the Mac simultaneously, the Mac scans for the base station wifi network (this is configured as the top preferred wifi network) at start up, but since the base staion is still booting up, the Mac doesn't find the wifi.
But once the base station has booted up and wifi is available, the Mac no longer bothers to join it. At this point, the Mac is also not able to do Time Machine backups to the Time Capsule because it is not able to locate the Time capsule disk over the wifi.
This situation remains (i.e., the Mac being not connected to the wifi) unless I do ONE of the following:
1. I manually select the preferred wifi network using the wifi icon at the top of the screen; OR
2. I put the Mac to sleep (by closing the cover) and then wake it up. On wake up, it connects automatically to the preferred wifi network; OR
3. I turn of the wifi (using the wifi icon on the top) and turn it back on, at which point, the Mac automatically connects to the preferred wifi network.
I have tried everything possible including contacting Apple support, but so far the issue is unresolved.
Appreciate any help you can provide.
PremI have had wireless problems intermittently for a year, and seriously for 6 weeks. Apple denied the issue and was no help in spite of many tens of thousands of people on their own discussions complaining. I found a post suggesting a couple of things which fixed the problem. I don't know if both are necessary, but the first by itself does not solve the problem.
Lock the channel of your router to channel 1, apparently Apple and 802.11n don't play well together on higher channels. When this becomes a standard this will be resolved I hope.
Open your network preferences, select 'airport' and advanced. Delete unused networks. Select your network.
Open TCP/IP and write down all the settings, configure iPv4 manually. Enter the settings manually. Turn off IpV6.
Open DNS and write down your DNS server. Delete it and re-enter it manually.
This has worked on 2 macbooks and an iMac for the last 3 weeks with no network drops.
Joe Shea
Philadelphia -
i just updated my ipad to ios 8 but i cant connect to wifi network..its says my password is incorrect although i know my password is correct as successfully updated 2 iphones and connected to same wifi network
I had the same problem. I reset my network settings as iOS 8 on my iPad 3 seemed a bit slow. When I tried to reconnect to the wifi the correct password was not accepted immediately.
after retrying several times it did manage to join the network. The only observation I had was that I had a weak signal and an iPhone next to me at the time.
make sure you are close to the wifi signal away from any other wifi devices. -
Cannot connect to my WIFI network since updating to IOS 7.0
Since updating to IOS 7.0, I have been unable to connect to my (or any) wifi network.
I have tried every suggestion / help from the forums / web searching.
I have tried different wifi connections (all the same - unable to connect to network).
Waited for the 7.0.3 to see if this has fixed the problem, but no..
I'm extremely frustrated and would like Apple to help.. I'm not the only person with this problem - and I haven't seen a single response from apple regarding this.
Since I am now out of the 1 year warranty - I will be pursuing this through the 'sale of goods' act in the UK if I don't receive a satisfactory response - I expect my device to last longer than a couple of years and consider the ipad broken as a result of the update...
Have been very happy with my apple devices up to this point, but loosing patience now!Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Maybe you are looking for
-
How to delete hidden security copies of Time Machine?
I had the same issue with Mavericks & Lion, the OS starts making by his own a hidden security copy without using Time Machine on my local disk, usually I used the next command on terminal and my problem would be deleted "sudo tmutil disablelocal" but
-
Install SQL Server 2008 R2 in Windows Server 2012 using SQL4SAP Script
Hi guys, Since we are performing a SAP System Migration from older releases of Windows/SQL Server, as detailed on SAP Note 1780433 - System copy of SAP systems on Windows 2012 : SQL Server We need to install SQL Server 2008 R2 before upgrading the sy
-
Problem in Client authentication in JSSE on a web service
Hi, I am having a Web service running on my Web server (Sunone 6.1). I need to implement Security on it using JSSE. It has to be a MUTUAL authentication. I have installed all the certificates and CA certs on both Client and server. But when I try to
-
"We're sorry, we are unable to continue with your activation at this time"
I bought a new iPhone 4s from a electronics shop here in Norway today with a norwegian network. When I tried to activate my iPhone, I got this message: "We're sorry, we are unable to continue with your activation at this time" I also tried to activat
-
How do I download icloud to my Macbook?