Problem connect with 2.1.0.63 using a SSH Tunnel from a MAC
When I hit the Test button on the properties it says "Successful" When I try and connect I get this error:
java.lang.NullPointerException
at java.util.TimeZone.parseCustomTimeZone(TimeZone.java:767)
at java.util.TimeZone.getTimeZone(TimeZone.java:471)
at java.util.TimeZone.getTimeZone(TimeZone.java:465)
at oracle.jdbc.driver.PhysicalConnection.setDbTzCalendar(PhysicalConnection.java:7339)
at oracle.jdbc.driver.PhysicalConnection.setSessionTimeZone(PhysicalConnection.java:7275)
at oracle.javatools.db.ora.Oracle8i.initOC(Oracle8i.java:245)
at oracle.javatools.db.ora.Oracle8i.<init>(Oracle8i.java:49)
at oracle.javatools.db.ora.Oracle9i.<init>(Oracle9i.java:154)
at oracle.javatools.db.ora.Oracle9iR2.<init>(Oracle9iR2.java:43)
at oracle.javatools.db.ora.Oracle10g.<init>(Oracle10g.java:29)
at oracle.javatools.db.ora.Oracle10gR2.<init>(Oracle10gR2.java:21)
at oracle.javatools.db.ora.Oracle11g.<init>(Oracle11g.java:23)
at oracle.javatools.db.ora.OracleDatabaseFactory.createDatabaseImpl(OracleDatabaseFactory.java:133)
at oracle.javatools.db.DatabaseFactory.createDatabaseImpl(DatabaseFactory.java:231)
at oracle.javatools.db.DatabaseFactory.createDatabase(DatabaseFactory.java:212)
at oracle.jdeveloper.db.DatabaseConnections.getDatabase(DatabaseConnections.java:607)
at oracle.jdeveloper.db.DatabaseConnections.getDatabase(DatabaseConnections.java:562)
at oracle.dbtools.raptor.utils.Connections$ConnectionInfo.getDatabase(Connections.java:145)
at oracle.dbtools.raptor.utils.Connections.getConnection(Connections.java:874)
at oracle.dbtools.raptor.utils.Connections.getConnection(Connections.java:855)
at oracle.dbtools.raptor.navigator.DatabaseConnection.openConnectionImpl(DatabaseConnection.java:117)
at oracle.dbtools.raptor.navigator.AbstractConnectionNode.getConnection(AbstractConnectionNode.java:30)
at oracle.dbtools.raptor.navigator.DatabaseNavigatorController.connect(DatabaseNavigatorController.java:667)
at oracle.dbtools.raptor.navigator.DatabaseNavigatorController.handleEvent(DatabaseNavigatorController.java:279)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:531)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:886)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:503)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:2028)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2351)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.AbstractButton.doClick(AbstractButton.java:389)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1223)
at com.apple.laf.AquaMenuItemUI.doClick(AquaMenuItemUI.java:137)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1264)
at java.awt.Component.processMouseEvent(Component.java:6348)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6113)
at java.awt.Container.processEvent(Container.java:2085)
at java.awt.Component.dispatchEventImpl(Component.java:4714)
at java.awt.Container.dispatchEventImpl(Container.java:2143)
at java.awt.Component.dispatchEvent(Component.java:4544)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4618)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4282)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4212)
at java.awt.Container.dispatchEventImpl(Container.java:2129)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4544)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:635)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:296)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:211)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:196)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:188)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
I've seen this on systems with an unsupported OS locale. Can you change your settings to America and try again?
K.
Similar Messages
-
I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer. Does anyone have a similar problem???
The warranty entitles you to complimentary phone support for the first 90 days of ownership.
-
hey guys i got a problem connecting with itunes always giving me ox80090318 if u know the answer please let me know thx
Hello Makiaveli,
It sounds like you are getting this error code when you are trying to access the iTunes Store.
I found this article with this error listed in the symptoms section, for you that should help troubleshoot the issue named:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
Resolution
The cause for these issues is a program that monitors the Winsock protocol for Windows conflicting with Apple software. These programs usually use a Layered Service Provider (LSP) that can help identify the particular program installed. The programs that monitor this protocol have a variety of purposes, including security software, content filtering, and optimization of network traffic.
To find the LSP:
Download Autoruns for Windows from Microsoft
Look for Autoruns.ZIP and open the compressed folder.
After reviewing the contents and the license, drag autoruns.exe to the desktop.
Open Autoruns.
Click on the tab that says Winsock Providers.
A list of items should appear. A column showing the publisher should be available.
For items other than Bonjour, which is from Apple, check with the publisher for updates to resolve the conflict between their software and Apple software.
If the publisher is unfamiliar to you, you may be able to use the table below to find out more information about the origin of the modifications to Windows.
Some of the publishers and programs that are known to have versions with a conflict are listed below:
Product or Publisher
LSP Name
Bigfoot Networks / Killer Gaming
BfLLR over [MSAFD Tcpip [TCP/IPv6]]
Bsecure
Bsecure over [MSAFD Tcpip [TCP/IP]]
Bullguard
BGLsp over [MSAFD Tcpip [TCP/IP]]
Bytemobile, Inc.
BMI over [MSAFD Tcpip [TCP/IP]]
CA / Total Defense Internet Security
LAYERED_PROVIDER over [MSAFD Tcpip [TCP/IPv6]]
ContentWatch / Net Nanny
CWALSPSYS CWALSP MSAFD Tcpip [TCP/IP]
Covenant Eyes
Covenant Eyes Monitoring over [MSAFD Tcpip [TCP/IP]]
Dr. Web
DrWebSP.4 over [MSAFD Tcpip [TCP/IP]]
Earthlink Total Access
PropelLSP over [MSAFD Tcpip [TCP/IP]]
Eset
NOD32 protected [MSAFD Tcpip [TCP/IP]]
Fourelle Venturi
VENTURI_TP [MSAFD Tcpip [TCP/IP]]
FoxyProxy
FoxyProxy Service Provider over [MSAFD Tcpip [TCP/IP]]
Hide My IP / My Privacy Tools
My Privacy Tools - LSP over [MSAFD Tcpip [TCP/IP]]
MegaUpload / MegaKey
msadmid over [MSAFD Tcpip [TCP/IP]]
Netintelligence
NIHLSP over [MSAFD Tcpip [TCP/IP]]
Netscape Internet Service
SlipStream LSP over [MSAFD Tcpip [TCP/IP]]
Netsweeper
Liger over [MSAFD Tcpip [TCP/IP]]
Norman/Norman Security Suite
NLF over [MSAFD Tcpip [TCP/IP]]
Panda AntiVirus
PAV_LAYERED over [MSAFD Tcpip [TCP/IP]]
PC Tools / Spyware Doctor
PCTOOLS over [MSAFD Tcpip [TCP/IP]]
PureSight Internet Content Filter
Winsock over MSAFD Tcpip [TCP/IP]
Ratajik Software StationRipper
AVSDA over [MSAFD-Tcpip [TCP/IP]
Safe Eyes / McAfee Family Protection
Internet Content Filter over [MSAFD Tcpip [TCP/IP]]
Sendori
SendoriLSP over [MSAFD Tcpip [TCP/IP]]
SpeedBit Video Accelerator
SBLSP over [MSAFD Tcpip [TCP/IP]]
TellyAbroad
EasyHideIP over [MSAFD Tcpip [TCP/IP]]
Trend Micro
Trend Micro LSP over [MSAFD Tcpip [TCP/IP]]
VMWare
VMCI sockets DGRAM
Wave / Embassy Trust Suite
Wave Systems Kerberos LSP over [MSAFD Tcpip [TCP/IP]]
XFire
Xfire_LSP MSAFD Tcpip [TCP/IP]
Once you've identified the third-party software that installed the LSP, you should check for updates. If the software is your security software, see iTunes: Troubleshooting security software issues for additional information.
Bytemobile is usually associated with cellular data connection software. You may want to check if your provider has instructions to disable or uninstall that portion of the software, such as these instructions from AT&T.
Note: If unsure on the origin of your LSP, you may try to locate vendor information to determine which software is responsible for the non-default value here.
Thank you for using Apple Support Communities.
Cheers,
SterlingD -
Lync 2013. There was a problem connecting with the Exchange. Unable to load the magazine discussions.
Installed Lync Server Standart 2013, client PC MS Office 2013.
As the mail system - Lotus Notes Domino Server and Lotus Notes client, respectively.
Exchange is not installed at all.
question:
1 What is the message: "There was a problem connecting with Exchange. Unable to load the magazine discussions." and how it is fraught?
2 How can I fix this message? Cleaning the C: \ Users \% UserName% \ AppData \ Local \ Microsoft \ Office \ 15.0 \ Lync \ does not help
3 What are the disadvantages when using Lync Server Standart 2013 without Exchange? In principle, I put for Lync Exchange?
4 What are the advantages when using Lync Server Standart 2013 with Exchange?
5 Is it possible to work simultaneously Lync Server Standart 2013 + Exchange + Lotus Notes
Thank you.1) That sounds like a strange translation. But basically, it wants to connect to Exchange and it's complaining.
2) You can attempt to go to Tools->Options->Personal and set Personal Information Manager to None, and in Lync Management Shell run set-csclientpolicy
http://technet.microsoft.com/en-us/library/gg398300.aspx with the following options:
DisableCalendarPresence $True
DisableEmailComparisonCheck $True
EnableExchangeContactSync $False
There may be more, I've never tried to completely disable Exchange features from Lync.
3) No conferencing plugin for meeting invites, no automatic presence management based upon your calendar, no searching your Outlook contacts for new contacts, no voicemail, no conversation history,no unified contact store, and more:
http://technet.microsoft.com/en-us/library/jj688098.aspx
4) This is just #3 in reverse :)
5) Depends on your goals, but the experience wouldn't be great. You'd want to keep your contacts and calendar in Exchange and your email in Notes. It would be confusing to your users.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications -
MacbookPro loses connection with Logitech V270 periodically during use
My MacbookPro loses connection with Logitech V270 periodically during use. THis happens about every 5 to 10 minutes. I get the pic on the screen showing that the computer has lost the connection with the mouse and then after a few seconds it reconnects and works again. I've tested it out with my Powerbook and it works fine so I think it must be related to the MacbookPro. Anyone else experiencing this issue?
Hi, Jeffrey!
Yes, there have been a few such problems discussed here, and in the MacBook Pro Bluetooth, USB... forum; the Other Bluetooth devices forum; and elsewhere in Apple Discussions related to Logitech V270 performance issues with both PPC and Intel-based Macs, &/or to Bluetooth performance in Intel-based Macs specifically. But, given an assumption or two about the number of participants who are not posting about such problems, my guess is that both Bluetooth and the V270 are working for many users. (By which I mean: let's presume the problem is amenable to troubleshooting...)
As an example, here's a link to a thread specifically about connection problems with the Logitech V270 — including various posts, apparently all by PPC users. But don't let "nay-sayers" get you down... By the way, the fact that the V270 works more reliably with your PowerBook is not, imo, definite proof that there's some inherent problem related to the MacBook Pro — various factors such as software, "pairing" and connection, differerent peripherals configuration, etc. may differ between the two Macs and affect the V270's functionality.
I'm not aware of single, straightforward underlying cause for what you're experiencing; some troubleshooting and trial-and-error may be required to resolve it. So, if I may, here are a few thoughts/suggestions; perhaps some may be relevant &/or helpful:
(1) Although Logitech says here that the V270 doesn't require a driver for Mac OS X functionality, they did recently update the Logitech Control Center software to v.2.0.0 (download page + VersionTracker reviews) for Universal compatibility — so why not at least try it? (Keep in mind that Logitech recommends uninstalling all of their outdated software before installing anew — and, thus, this would probably also be a good idea if LCC 2.0.0 doesn't work for you after giving it a solid "test drive.")
(2) "3rd-party" drivers (like SteerMouse — also a Universal Binary — often improve functionality of Bluetooth-enabled mice. Although dropped connections are probably due to another factor, this is shareware and offers a trial period — so, again, no harm in checking it out.
(3) There are various troubleshooting steps worth trying for lost Bluetooth connections. Some that you may come across aren't applicable to your MacBook Pro — because, for example, its Bluetooth firmware and software should be current after application of the Mac OS X 10.4.6 Combo for Intel Update. Some other things worth considering include those listed below. Hopefully, one will work and you won't need to try them all:
(a) The best first step to try usually involves simply deleting your mouse's "pairing" and using the Bluetooth Setup Assistant (BSA) to reconfigure it just as you did initially after purchase.
(b) Sometimes a variation of "power-cyling" (of the internal Bluetooth module and the mouse) helps with a problem like this. With a laptop, this would involve two basic steps. Shut down the MacBook Pro normally (not restart), and leave it off for several minutes before rebooting. Remove the mouse's batteries for at least 1 minute, then replace them (preferably with new) — taking care of their polarity and that they are seated properly. Check that the internal metal contacts/springs, etc. are clean, unbent, and free from corrosion. Some users have reported ~high sensitivity to the in-place voltage of batteries for the Bluetooth connection process to succeed. Leave the V270's "on/off switch" in the "off" position while starting-up the MacBook Pro, then turn it "on" and re-pair if necessary.
Some users have also reported success with Bluetooth-related problems by resetting PRAM and NVRAM. Others have tried resetting the Power Management Unit (PMU), although my personal virew is that (as described in the article just linked) this should always be considered a "last resort." Article 303234 also lists both of these options.
(c) Non-compliant USB device(s) and other USB-related issues (such as a device acting as a "traffic hog" through your controller) can cause this kind of problem. Most can be identified using the tried-and-true method of a process of elimination. (See, e.g., KnowledgeBase articles 58033 and 25243.)
(d) Make a careful inventory of potential sources of 2.4 GHz RF interference in the environment(s) where the problems occur — and taking any appropriate steps to isolate and resolve any issues you may identify.
(e) If nothing else has helped, perhaps further exploration is warranted. Do you see anything in Activity Monitor or your system.log or console.log closely correlated to the times of "dropped connections" that may provide a clue about what's happening?
(f) If the behavior began recently, re-applying the Mac OS X 10.4.6 Combo for Intel updater may be a step worth trying: several Bluetooth improvements were incorporated in this release, and reapplying the Combo updater has reportedly helped others with Bluetooth-related problems.
(g) Although I don't recall an example of corrupt preferences causing this particular behavior, you may want to try removing ~/Library/Preferences/com.apple.Bluetooth.plist and restarting (or logging-out and -in again), if nothing else has worked. As with any such preferences "refreshing," you'd need to reset things the way you like in System Preferences »» Bluetooth after this return to default preferences.
I hope something here is useful to you in troubleshooting and solving the intermittent "dropped-connections" problem.
Please post back to share your progress — it may help others.
Regards,
Dean
[2,309 ⊥ 3,700] -
I am trying to look at my I cloud account on a pc in the library it normally works fine but now says problem connecting with the server. what can i do or is there an issue today
Hi...
Try restarting the AMDS > How to restart the Apple Mobile Device Service (AMDS) on Windows
iCloud system status reports everything green > Apple - System Status -
My HP laptop recently 'crashed' and had to be reset to factory settings. I've tried to re-download i-tunes but nothing seems to be happening. My i-pod Nano (4th/5th gen) is fully charged but I get no connection with i-tunes as I used to. Help?
Hi, Primmy1.
Thank you for the question. Below, I have attached a couple troubleshooting articles that will help resolve the device not being recognized by iTunes.
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
If the issue still persists after processing these steps, see the section in the article below labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8.
Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H. -
My mac seems to have a virus thats connected with a few apps i use and i can't use them without my computer glitching out even though i've reinstalled the apps a few times. It's very frusterating especially when i'm doing someting when my computer randomly freezes or justs logs out for no reason when i'm using the apps.
Matthew,
if you boot your MacBook Pro in Safe mode, do those apps still behave in the same way? -
How do I fix this message. When trying to set up the ipod again? There was a problem connecting with the server. please help
Was this the error?
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
I am having trouble connecting to a particular person via face time. I dont have any problems connecting with other people. They are in Japan I am in Australia. Would that make a difference?
Unable to make or receive FaceTime calls after April 16, 2014
-
i use a macbook pro which came with facetime i have an iphone 4S as well. whenever i use the wireless on my iphone i can facetime with ease however when i use the same wireless for my mac to facetime the call always gets disconnected.
To use factime on your Mac, I believe you will need to use your email address to do so instead of your wireless number. Since you can't make calls on the Mac.
-
I have a Yamaha RX-A2010 A/V receiver which is connected to internt but it does not receive my itunes from my Mac computer.
Well, I see a few things that can be in the way:
1. MAC address filtering is really not a security measure since the MAC addresses are sent in the clear (unencrypted) and many devices can have their MAC addresses changed easily with software. I'd recommend losing the MAC filtering and just use WPA2 and be even more secure than you are currently.
2. If you disabled the firewalls during the install, that may have been a bad thing. The installer is supposed to create ports through the firewalls during install, so if they are disabled and later enabled, the ports are not there.
3. Does your printer show up if you type its IP into a browser?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Leopard problem connecting with wifi AP using WPA PSK instead of WEP
I cannot connect via Airport to Speedtouch 580i accesspoint using WPA PSK.
WEP works just fine, but using WPA PSK I keep getting the message invalid password and then cannot connect wirelessly.
Tiger as of version 10.4.3 through .11 worked flawlessly via WPA PSK with the same AP.
I installed 10.5.4 Leopard from scratch and used combo 10.5.5 and and a few days ago combo update 10.5.6 but problem remain.
After the clean install I used migration assistent to get user data and logins from Tiger into Leopard, having used an image made with SuperDuper.
I have read many support forums and suggestions, it all didn't result in a working internet connection at all with WPA PSK :-...(
What I did until now:
- Disabled IPv6 for the airport interface
- Changed to a simple WPA PSK password without CAPITALS instead of something like #A!$($D$%\T@q{|
- Changed to a fixed channel in the wireless accesspoint instead of auto. http://discussions.apple.com/thread.jspa?threadID=1195706
- Rebooted Accesspoint various times.
- Changed to 802.11g only instead of b+g
- Tried both TKIP and AES as encryption type
- Disabled and re-enabled Firewall in Leopard
- Changed to fixed ip adress instead of via DHCP for network addres assignment
- Tried connecting with and without broadcast of SSID to AP.
- Repaired keychain , http://discussions.apple.com/thread.jspa?messageID=5858982
- Did various keychain changes incl deleting old values
- Deleted some items from library, as per suggestions from forums.
In the end I have a suspicion that it all drills down to something simple, quotes (" ") are used to present the password in the password field, at least this is the case with WEP, but this does not harm the functionality for WEP as this is working alright.
With the current WPA PSK implementation it perhaps does influence, because it keeps saying invalid password. I have tested both with and without quotes and things did not improve at all.
I'm running out of ideas to solve this matter, therefore I have sent a report to Apple via their Feedback webpage.
While having using 10.5.5 fo a while I had big hopes 10.5.6 would cure the problem , unfortunately this is not the case.
Please provide more suggestions to solve this problem.Checked Accesspoint firmware upgrade. The only difference between the current 4.2.7.25 and the latest version, 4.2.7.30 is the support of WDS i.e. expanding the wireless network by connecting 2 APs together (via WEP).
Still tried upgrading via the MAC OS X update software, it did not fire up, I think the software is not fond of Leopards
As WEP works ok with Leopard on my G4 Powerbook 12inch, I didn't want to focus further on the speedtouch because of the motto 'if it ain't broke don't fix it.'
Am going to research more on Keychain and DHCP, others are reporting issues with it along with this 'airport crisis' http://forums.macrumors.com/showthread.php?t=375838 -
WRT300N - Problem Connecting With Desktop
I recently reset my HP desktop to the factory default after experiencing a whole slew of technical issues I had neither intention nor time to deal with. As a result of the reset, I lost connectivity to my host computer which runs a WRT300N Wireless Router. This wasn't a suprise, but I then ran into a few more problems in trying to reconnect. The first issue I experienced was that on my client PC, it wouldn't detect the Wireless PCI Card I previously installed before the factory reset. This was a quick fix, as upon opening the tower, I discovered the card had become disconnected. I connected the card and ran the installation CD successfully. Since the installation program contains a service to select the wireless network you wish to connect to, I did so, and followed the on screen directions to reset my computer. Unfortunately, I was still disconnected from the intended wireless network upon opening up Internet Explorer. I ran the Wirless Zero Configuration service on my computer so I could deal with the wireless networks on more familiar ground. I was completely dumbfounded to what I saw there. It detected the wireless network, but it gives all the wrong information about it. The SSID resembles the actual SSID, but it is not the same. Also, it says that the wireless network is unsecured when, in actuality, is it secured with a WEP Key. I am stumped. A PSP and HP laptop have absolutely no problem connecting to this network. The problem seems to soley exist with my HP desktop. Any help at all would be great. Thank you.
Hi,
Have you tried to install latest drivers for the wireless PCI card.
Download those from www.linksys.com/download from a computer already online.
Transfer those drivers to computer with the wireless PCI card, using a flash drive or by burning a disk.
Uninstall the old drivers from desktop, reboot the desktop computer.
Install the new drivers and again reboot the desktop computer.
Now check for available wireless networks and try to connect to wireless network. -
Problem connecting (read only) to Sybase Server using Crystal XI
Hi,
I'm having a very similar problem to Renuha in the thread 'Problem connecting to Sybase Server using Crystal XI-Version-11.0.0.1994'
The thread is marked as assumed answered but I suspect not!
I am experiencing this issue in Crystal XI R1 11.0.0.2495, post SP4 install.
Though the issue was exactly the same pre SP4 install, when it was a vanilla install @ version 11.0.0.1282.
I am trying to connect to a Sybase database via Crystal > Start Page > Standard Report Wizard > Standard Report Creation Wizard > Sybase Server > Make New Connection
I enter the details, of my read only user account, and select my desired database, from the (successfully) populated 'Database' drop down.
After some time, in the 'Standard Report Creation Wizard' window I get the server listed under the Sybase Server branch, but, on expanding the server I only get '...no items found...'. However ,if I use the sa account, after selecting a particular database, I can see all the available database objects under the Sybase Server > [server] node.
I am on Windows XP Pro SP3, with Sybase Open Client v12.5.2
I assume my Sybase Open client is correctly installed as I am able to successfully connect using the sa account.
I am trying to connect to a Solaris 10 (5.10) system running Sybase @@version= Adaptive Server Enterprise/15.0.3/EBF 16548 ESD#1/P/Sun_svr4/OS 5.8/ase1503/268
Our database vendor/supplier has said:
"...Crystal reports is not handling the granularity of the Sybase revoke permissions and assuming we've revoked all access to any table where we have revoked only write access.
Is anyone able to assist?
Thanks,
MattDon,
Thanks again for the response and my apologies for the delay in reply - they keep giving me other work to do!!
Anyway.
CR XI R2 SP6 successfully installed.
Same outcome on Sybase connect, with a full read/write sa account
i.e. successfull connect and sight of all database objects within my chosen database.
Same outcome on my restricted read only account
i.e. I am able to successfully authenticate and choose which database I wish to select but subsequently, still, 'no items found' is displayed when I expand my database node.
I believe it is a problem with the read only account as both accounts are able to connect, as shown by the availablilty of the dropdown, listing the available databases within the specified Sybase instance.
The reasons for going down this path are as you suspect - I've been asked to provide access which is not full!
As far as the testing via test tbl creation.
I know very little of Sybase (?!) and all our Sybase DBA activities are carried out by our system/dB vendor/supplier.
To do further testing I would have to go back to our dB vendor/supplier but, as mentioned, (I get the impression) they already beleive they have carried out all required of them by providing locked down read only access.
I ought to mention that the database trying to be accessed is a restored copy of "the previous days" live data, on an MIS server. The read-only account comes over as with full privileges, and it is a script, subsequent to database restore, which knocks down the accounts privs, to read-only. Given this scenario what would I have to ask of them re further testing/troubleshooting?
Thanks,
Matt
Maybe you are looking for
-
I am new to contribute and using the indent feature, this is indenting a lot more than i would like after researching seems like this is a "blockquote" feature and pre-defined, so is there a way to indent less without adding tables etc?
-
Migrating from Ingres 1.2 on VMS to Oracle 8i on Unix
I need to convert an Ingres 1.2 database (VMS) to Oracle 8i (Unix). Does anybody know of a toolkit that would work for me?
-
MD5 Encryption on UTF8 database on NVARCHAR datatype column
DECLARE l_string NVARCHAR2(600) := '123456'; checksum NVARCHAR2(600); BEGIN DBMS_OUTPUT.DISABLE; DBMS_OUTPUT.ENABLE(1000000); DBMS_OBFUSCATION_TOOLKIT.md5 (input_string => l_string, checksum_string => checksum); DBMS_OUTPUT.PUT_LINE(RAWTONHEX(utl_raw
-
Downloading Photoshop CC after trial
i have completed the Photoshop CC trial and need to install the product now but am unsure how to. the serial number appears to be incorrect also
-
Returning objects from functions
Hi, public HSSFRow someFunction() { HSSFRow returnrow; Iterator rowiterator = someobject.rowIterator(); while(rowiterator.hasNext()) { returnrow = rowiterator.next(); return returnrow; }My problem is this, I want to pass a HSS