Problem connecting 7.1 speaker system to iMac

I purchased creative 7.1 speaker system yesterday (Model No: Inspire:T7900). The package contains a cable to connect iMac and woofer system. The cable has 4 pins to one end and 3 pin to other end. According to the manual, I connected the 4 pins to woofer system with the matching colors. Now the problem is how to connect the other 3 pin end to iMac. iMac does have only one analog out, if I connect any one of the plug, only 2 set of speakers are giving the sound and the output switches from speaker to speaker everytime I change the pin. Is there a way to connect all the 3 pins to mac so that all the 7 speakers will become functional. Please help me... I'm very much worried :(:(

I'm baffled at how you got it to work. I'd be humored to know what kind of loops you must have jumped through to get it going. Humored... and very much interested in the hack.
I brought one home from a Microcenter today for my PPC Mac Mini (10.5.2) particularly.
I've tinkered with it all day but it just is not producing any sound.
The manual instructions do not lead to results.
It does show up as a device by profiler. Alas Audio MIDI Setup is refusing to recognize the FireWave.
So I'm out $100 and am looking at another trip back to return it... unless it CAN really work.
I've emailed Griffin.
Doesn't work on a 10.5.1 Mac Pro either.
I cannot find ANY devices that will do hardware decoding via firewire /or/ usb that are supported by 10.5.2 that aren't total overkill for what I'm using it for. This seemed like a perfect solution, but I'm really dissatisfied that it didn't work out of the box and with the lack of Griffin's support.
So please if you can help me figure this out I'd really be grateful.

Similar Messages

  • There was a problem connecting to the server "...iMac"

    I keep getting the error message, "There was a problem connecting to the server ..."iMac."  I have Mavericks 10.9.2 on both my Macbook Pro and my iMac.  The Macbook is the system having issues.  I've seen "fixes" for Time Machine for Lion.  I have addressed this, and it does not seem to be the problem.  I've deleted all servers from the list, unmounted Time Machine and turned it off and back on again to refresh the settings, turned sharing off and back on.
    Any Mavericks ideas out there?

    The subject of the discussion you linked to is unrelated.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password. Reboot and recreate the network settings.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • Connecting a Logitech speaker system to my laptop

    I recently aquired the above speaker system & wish to connect to my laptop. The only socket available is the earphones socket - anybody any experience of this?

    And where is the problem?
    Maybe you need some adapter?
    By the way: which Logitech speaker system do you want to use?

  • Audio Problem connecting external apple speaker to iMac

    When I connect my Apple HIFI External Speaker to the audio out at the back of my iMac with the apple RCA optical cable, I can no longer control volume with the apple keyboard.
    I can only control the volume with the apple remote.
    1. Any suggestions to maintain keyboard control as well
    Thanks

    When you connect the third-party monitor, you can use System Preferences -> Displays to control the external monitor. You may have your preferences set to Mirror the iMac's display. But if the resolution (pixels supported by the external screen) does not match the iMac display, then it will not display properly. You need to uncheck the Mirror option in that instance. When the display is not a 'mirror', you need to drag some content (windows) to the external display to see what you want to work on there.
    Once the system detects your external monitor, you can make that change. You also need to line up the two monitors in the way you wish to move content between them and which monitor you want to display the Apple menu bar. For example, the iMac display may have its right side aligned with the left side of the external display so you can drag windows through the right side of the iMac screen and they'll appear on the left side of the external display.
    You also drag the Apple menu bar to the external display if you'll be working with programs using the external display. You can set resolution and other things on the two displays independently.
    Hope this helps.

  • Problem connecting to internet after NEW 27" iMac makes up from sleep

    Ok, I have a brand new 27” iMac and when it connects to the internet after waking up from sleep mode doesn't have any download speed.. See image
    This only happen when it wakes up and the only way to fix it is to restart the computer. I have tried turning on and off the airport as well as messing around with other settings and nothing seams to fix it.
    I am using an Apple Airport Extreme with a Comcasts 20mb connection.
    This is the only computer in the house that has this problem (3 other MacBook Pros) And while the iMac is registering no download speed, the other computer are cranking out at over 20mbps.
    The fix for now has been turning off the power saving setting to allow sleep. so no sleep=internet.
    Any one having this problem? I don’t really want to lug it back to the apple store but I will if I have to.

    after waking up from sleep mode doesn't have any download speed..
    Intel-based iMac, Intel-based Mac mini: How to reset the System Management Controller
    Change your router channel.  Sometimes this all you will have to do.
    I don’t really want to lug it back to the apple store but I will if I have to.
    You don't have to.  Call Apple tech support.  They can give you instructions over the phone if the issue is just software.  You will have to bring it in if tech support suspects you have a hardware issue as they need to run diagnostic testing.

  • Can I connect 5.1 speaker sets to iMacs?

    And how or what is the best solution?

    Keep in mind that iMac's do not have true 5.1 sound card like some PC's, but that it supports Digital (Toslink) thru the Headphone 3.5mm Audio Output Jack.
    see > Logitech Z-5500 REAL 5.1 Surround on a Mac - how to setup - YouTube

  • New problem connecting to a speaker dock.

    I have a Vivo speaker dock and everything was fine until today and it won't recognise my ipod. I don't think it's the speaker dock because I can plug an mp3 player into it via 3.5mm phono and that works fine. I haven't played it since the 1.13 firmware update so I suspect that is the culprit. Anyone got any suggestions please?

    I've tried a restore and that hasn't sorted it...but of course the firmware is still 1.13

  • Sync speaker systems macbook

    A fellow has a Logitech Z623 speaker system and a LG CM4630 500w  speaker system and every time he plays music with them both on, the  sound isn't synced correctly (to break this down, if you play music one  speaker system makes starting beat first and then a few milliseconds  later the other speaker system kicks in causing a delay and a really bad  echo effect. He wants them both to be making the same sound at the same  time in sync.) . This is really annoying and it sounds like an echo  gone really wrong. He is using a MacBook Pro 13" for the sound, and the  Belkin Rockstar: http://www.newegg.co...VirtualParent=1 to connect the two  speaker systems up so they can be used at the same  time.

    http://support.apple.com/kb/PH12117
    http://support.apple.com/kb/PH1761

  • Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter.  TV displays generic Apple galaxy background and "some" windows (e.g. scree

    Not sure that I have selected the correct forum.  Hope my questions are clearly stated.
    Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter.  TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices).   It does not show Mail or Safari menus.  System preferences'  display "gathered" the Samsung and chose its resolution.  I did not find a way to select the Samsung as my display.
    In addition to having old hardware, we have Verizon FIOS providing internet and TV access.  Is there any way to make this work for us?  We would like to stream video (Netflix) and view shows from the Web.  Do we need Apple TV to do this?  Or is it not possible with our old iMac?  My husband thinks that our Airport could be a factor. 
    Thank you

    Lately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
    There are, actually, many alternatives to choose from than just from a Mac.
    You need to have or invest in a WiFi capable router for all of these examples.
    Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
    If you have a older Mac, like I have noticed many users do, then you have other options.
    If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time,  you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
    These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
    Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
    Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV.

  • HT2844 iMac 27"(late 2009), Audio in/Optical digital audio out port, stopped recognizing my new Bose speaker system, previously working...

    Hello,
    My iMac 27"(late 2009), Audio in/Optical digital audio out port, stopped recognizing my new Bose speaker system, previously working through that port. I tested the speaker system through my iPhone, and it works fine. I hooked it up to the Headphone out/Optical digital audio in port, and it works through that port also. I did a computer restart, I also checked all wiring and did a system repair on the computer. I also restarted the computer in mode where I could use the system utility, and the computer still did not correct the matter, and it reported everything as being "ok". I wented into "sound", through system preferences, and the computer does not recognize anything I plug into the Audio in/Optical digital audio out port. When I plug the speaker sysytem into the headphone out/optical digital audio out port, it does recognize the Bose speaker system as being "headphones".
    Reading through a lot of forums, I hear everything from compatibility, to the port being stuck, and on and on. Since the port was working before, and just quit working one day, I wonder if there is a capacitor or fuse or some type of similar thing is blown, and causing the port to be unfunctionable. Maybe the port went bad, but before this time, I had never used it, and the computer does not move around, and I never plug in and pull wiring out unless needing to, and that being rare.
    Here is a link to Costco, where I bought the system, and the exact system I have, if this is any help:  http://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&s=bsd&cs=04&sku= A4092931&ST=pla&dgc=ST&cid=262075&lid=4742361&acd=1230980794501410
    By the way, I am running OS X Mountain Lion (10.8.5). I upgraded to Mavericks about a month ago, and expeirienced a number of issues, and had to take my iMac into Apple. Talking with the tech, I decided to wait for a while more before I upgraded to Mavericks. I try and keep the computer maintained.
    If any of you have any ideas regadrding wear and tear, and fix I can do, etc., besides having to take my computer into Apple? Thank you, and potentially all of you, for your time and effort in helping me with this issue. Thank you kindly.
    davE

    Okay, davE, first, you have posted in the "Mac Pro" forum (not Macbook Pro), so we can't be super helpful
    but we help you. First, hold down the Option key while clicking on the speaker icon at the top of your screen. This should show you all the inputs and outputs you have. you could check in "About this Mac" then "More info" to see whatever's recognized. Then, maybe, fire up Audio MIDI. your speaker system should show up there. something might have gotten set incorrectly. You can test it there.  I guess you are using the good ol' analog cable for connection, and it works on your iPhone, so the cable isn't bad.  You could try this. it 's an adapter which might solve your problem
    http://www.amazon.com/gp/product/B004HBWYQ6/ref=oh_details_o00_s00_i00
    depending on which model of Bose speaker you have, you might try doing a product reset
    turn off speakers...unplug power cord from outlet...wait 1 minute..plug cord into outlet..turn on speakers..
    \\turning off automatic standby||
    press and hold top of control pod for 6 seconds until you hear 2 tones that go from high to low
    other than that ,I  don't know
    John B

  • A solution to the S750 speaker system problem

    Well my s750 died just like everybody elses. But after creative wanted me to pay 75% of my purchase price, I found a better solution. Nope, I am not fixing the unit like you guy's. I do not see the need to fix a poorly design system! I am not sure if creative or indigo/bash/blade audio is to be blamed. But if I had to pick, I would say "indigo/bash/blade audio". Years ago before blade audio became indigo, I had a chance to visit their location in ontario Canada. This was just when they stop making the blade audio car amps.
    While I was there, I happened to see this long list of brand names they had started to make amp modules for. Names like Harman International, Klipsch and so on. Anyway I cast the blame on indigo for this reason: Some years ago I had purchased a set of "harman international" infinity IL series speakers. Like our creative s750, the infinity shares a bash powered subwoofer system. And just like the s750 the infinity subwoofer like to blow up too! In the case of the infinity, the power supply was the weak link. The amp module in the infinity at that time, was built just like the blade audio car amps before. Which in my opinion is a much better design than what is being used in the s750. I remember one of the sale guy at circuit city at the time saying, "I wish we would drop this model". He went on to tell me the failure on the powered units were very high. You know there is a problem when the mid level Creative Inspire T7700 7.1, out last the flagship s750. Now, whats my better solution you guy's want to know? Two words , Simplifi Digital! The 7075a 7.1 amplifier along with Definitive Technology Pro Sub1000 and the remaing surround speakers from my s750 system. Yes, it did cost me more to go this route. But what I now have is a much more reliable system. And a sound that the s750 can only dream about. My s750 died while I was listening to Dave Bruebeck quartet "take five" at mid volume. With my current setup, I can listen mid volume all day long with no hiccups.
    For those who my have the cash to spend. I recommend looking at my direction!? Keep this in mind, make sure whatever powered subwoofer you choose, is adjustable up to 50hz. The creative surround speakers dont play very well below 20hz. Also make sure whatever powered sub you choose don't use a BASH amplifier. For those looking at the s750 as a purchase, good luck. Or go over to partsexpress.com and get the Dayton Part Number 300-670, surround speakers. Then get the simplifi digital 7075 7.1 amplifier and power subwoofer of your choice and make a better/best system. Sorry Creative Labs! This post is NOT intended to cast negativity. I use and like the products you offer. I just do not like the s750, and the reasons are all over this forum and elsewhere on the net. I currently own 3 audigy 2zs sound cards, three Inspire t7700 speaker system, three sound blasters modems and yes, one defective/dead s750 speaker system. If anything use this post as a positive to what Creative Labs could offer in the future. A system like I now have, sure would be nice with the Creative name all over it.
    Victor
    Creative Labs end user

    My system specs below. What I have now simply blows the S750 away. And this is mated to my Audigy 2zs card. I am tempted to try my Terratec Aueron 7.1 universe which does sound better than my 2zs. The Simlifi Digital amplifier is one serious unit. This amp has one HUGE toroidal transformer inside of it! I was able to see it thru the vents on top of the cover. Definitive Technology ProSub 1000 Subwoofer Specifications:Complement: One 10" woofer with polymer cone coupled to one 10" infrasonic radiator
    Amplifier: 300 Watts RMS
    Speaker Level High-Pass
    Filter: 6 db/octave (80 Hz)
    High-Level Low-Pass Filter: 24 db/octave continuously variable (40 Hz ~ 50 Hz) plus unfiltered LFE direct coupled input
    Frequency Response: 8 Hz ~ 50 Hz
    Simplifi Digital 7075, 7.1 Channel Surround Amplifier
    Detailed Specfications
    Power Output: 50 W/ch RMS, 8 ohm ( kHz sine wave, all channels). 70 W/ch RMS, 6 ohms ( kHz sine wave, all channels) 75 W/ch RMS, 4 ohm ( kHz sine wave, all channels) 75 W/ch Peak, 8 ohm (music) 100 W/ch Peak, 4 ohm (music)
    Frequency Response: 20Hz-20kHz (+/-0.2db over the entire frequency range)
    Total Harmonic Distortion: <.03%, 50W RMS, 4/8 ohms, 20Hz-20kHz
    Line-level Audio Inputs: V RMS (2.83V P-p) yields full power out into 8 ohms
    50k Impedance
    8 RCA inputs
    Subwoofer output: Pass through (non-buffered)
    AC Power: 0-25 VAC at 5A
    Dimensions: 7.2"(width) x 3.9"(height) x 7.7"(depth)
    Weight: 33 lbs
    PRODUCT DESCRIPTION
    The perfect audio solution for your Media Center or traditional PC. Use the Simplifi Amplifier with a Media Center PC, and get clear, powerful audio in your living room without needing yet another remote. Connect the Simplifi Amplifier to a traditional PC and hear how good your computer's audio can be.
    Features
    Class A/B Hybrid Design provides power and audio fidelity
    Simple Rear Panel Connections make setup easy
    Power Sensing Technology turns amplifier on/off with PC
    Volume controlled through PC
    Media Center Power Plug
    Advanced Spike Protection
    Fan cooled

  • IMac 10.6.8, Snow Leopard with iTunes 11.0.1. loss of wifi speed when connecting a Bose Sound System via bluetooth

    Hello, I have an iMac 10.6.8, Snow Leopard with iTunes 11.0.1. When connecting my Bose Sound System via bluetooth the wifi downloadspeed goes from snappy to a crawl, disconnecting the bluetooth connection, the downloadspeed goes up again. Don't have this problems with the Sound System when connecting it to my iPad. I like to mention too, that the downloadspeed of my iPad is always better than of my iMac. Are there any experiences concerning this problem? Thank you in advance.

    UPDATE - PROBLEM SOLVED!!!!!!
    You can thank me later - after an hour on the phone, I finally got through to a Senior Engineer.
    Apperently the issues lies with GRID VIEW.
    Open your Itunes, Click on TV SHOWS, then quickly change your view from GRID VIEW (Defaults to this) to List View and Viola!
    We tested it out on the phone just minutes ago, my problem is solved and I suspect if you guys try this yours will be too.

  • There was a Problem connecting- on iMac

    Hello,
    I continuously getting the following Error on my iMac:
    "There was a problem connecting to the server "my MacBook Pro" The Server may not exists or it is unavailable at this time. Check the server name or IP address, check your network connection, and try again."
    I didn't do anything, so this is very annoying. I already tried some things, like deleting the entries in the key chain. Noting worked. Any Suggestions?

    There are many possible causes for this issue, and it may be hard to resolve. Please take each of the following steps that you haven't already tried. Back up all data before making any changes.
    If you get the alert in the login screen before you log in, stop here and ask for instructions.
    Step 1
    If you get the alert as soon as you log in, it's probably caused by one of your login items or by software that otherwise loads at startup or login. Ask if you need help identifying it. A known offender is "AdobeResourceSynchronizer," which is a component of some Adobe products. See also this discussion.
    Step 2
    If there's an icon representing the server in the sidebar of a Finder window, hold down the command key and drag it out.
    Step 3
    In the Finder, press the key combination command-K or select
              Go ▹ Go to Server...
    from the menu bar. In the upper right corner of the window that opens is a Recent Servers popup menu represented by a clock icon. From that menu, select
              Clear Recent Servers…
    and confirm. Test.
    Step 4
    Open the Printers & Scanners pane in System Preferences and delete any network devices you no longer use.
    Step 5
    Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing  command-C:
    ~/Library/PDF Services
    In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. A folder may open. If it does, move the contents to the Desktop, or to a new folder on the Desktop. Log out and log back in. Test. If there's no change, put the items you moved back where they were and continue.
    Step 6
    Open the folder
    ~/Library/Preferences
    as in Step 5 and move the file named "loginwindow.plist" items in that folder to the Trash, if it exists (it may not.)
    Log out and back in again, and test.
    Step 7
    Other possible causes are references in the iPhoto, iTunes, or iMovie library pointing to the server, and bookmarks in the Preview application.
    Try rebuilding the iPhoto library.
    Step 8
    Disconnect all wired peripherals except those needed to start up. Start up in safe mode. Test. After testing, restart as usual (not in safe mode) and verify that you still have the problem.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Step 9
    Triple-click the line below to select it:
    /System/Library/CoreServices/Directory Utility.app
    Rght-click or control-click the highlighted text and select
              Services ▹ Open
    from the contextual menu.* The application Directory Utility will open.
    In the Directory Utility window, select the Directory Editor tool in the toolbar. Select Mounts from the Viewing menu in the toolbar, and /Local/Default from the node menu, if not already selected. On the right is a list of names and values. By default, the list is empty. If it's not empty, post a screenshot of the window and stop here.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.
    Step 10
    Open the following file as you did in the last step:
    /etc/auto_master
    It will open in a TextEdit window. The contents should be exactly this:
    # Automounter master map
    +auto_master          # Use directory service
    /net               -hosts          -nobrowse,hidefromfinder,nosuid
    /home               auto_home     -nobrowse,hidefromfinder
    /Network/Servers     -fstab
    /-               -static
    If there are any other lines in the window, post them. Otherwise, close the window.

  • Can a 5.1 PC speaker system be hooked up to a 2009 iMac computer?

    Can an older 5.1 Suround sound speaker system from a Windows XP based computer be hooked up and operate through a 2009/2010 Intel based iMac computer?

    Hello joebono,
    I'm not sure which logitech system you have so I don't know what your setup is. I know on my computer my Logitech 5.1 sound system is USB.
    With that being said there is not enough ports on the computer to connect all the cables to the computer to make a standard 5.1 surround system work. What you need is a speaker system where everything connects to the sub woofer and then you connect the woofer to the computer.
    Alternatively like I mentioned on my own personal system is you have a speaker system powered through USB.
    This thread also discusses the issue you are experiencing.
    http://goo.gl/rCjYC
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • Connecting JBL bluetooth speaker to iMac

    Hi,  I just purchased a JBL Charge and want to connect it to my iMac desktop.  However, my iMac cannot find the JBL Charge in Bluetooth set up.  It doesn't list the JBL in the discovered devices.  I'm running Yosemite 10.10.1.  I have no problem connecting to my MacBook Air, iPad, or iPhone.  But I want to connect to my iMac to avoid downloading music to the other devices.  Has anyone else seen this?  Is there a fix?  Thanks for your help.

    Hello billdelaney8,
    Thank you for visiting Apple Support Communities.
    It sounds like you're not able to pair your JBL Charge with your iMac, but you can pair it with your other devices.
    Start with these troubleshooting tips to troubleshoot the bluetooth connection on your iMac:
    Bluetooth Quick Assist - Apple Support
    Check your device's system requirements
    Make sure that your computer meets your Bluetooth device's system requirements—visit the device manufacturer's website for details.
    Check for a Bluetooth update
    To check for new software, choose Software Update from the Apple menu (make sure that your computer is connected to the Internet). If newer Apple Bluetooth software exists, Software Update will prompt you to install it. To install an update, select the checkbox next to the software name and then click Install.
    Reduce potential signal interference
    Because Bluetooth works by transmitting signals through the air, some things can interfere with connections. Avoid situations in which metal objects come between your device and computer. Don't put your computer under a metal desk or in a metal cabinet. Keep your computer away from cordless phone base stations, microwave ovens, and other electrical devices that operate on a 2.4 GHz bandwidth. Make sure that your device and computer aren't more than 30 feet apart from each other.
    Restart your computer
    Sometimes a simple restart of your Mac is all it takes to get things running smoothly again. You may also want to try resetting your computer's PRAM and NVRAM.
    Reset your Bluetooth device
    Try turning your device off and then on again. If that doesn't resolve the issue, see if you can reset your device—refer to the documentation that came with your device for instructions.
    Best Regards,
    Jeremy

Maybe you are looking for