Problem connecting bluetooth headset with New MacBook Pro and OS 10.10. MBP did not recognise the headset (Platonic BeatBack Go2)

I have been using Plantronic bluetooth head set (BackBeat GO2 produced by Platonic) without any problem with my old Macbook under OS 10.6.8. When I bought a new Macbook Pro Retina (MBP) loaded with OS 10.10 and a MacAir (MA) also loaded with OS 10.10, I have problem connecting the head set. Both MBP and MA could not recognise the head set. Can some one help ..... I can't do without the bluetooth head set...

Similar Messages

I purchased a new MacBook Pro and when transferring files iphoto did not transfer. I have a question mark in the place of the icon. My pictures are in library but can't properly access iphoto. Thank you

I purchased a new MacBook Pro and when transferring files iphoto did not transfer. I have a question mark in the place of the icon. My pictures are in library but can't properly access iphoto. Thank you

Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac. You should be able to set a password for it. Save it. Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer, I suppose, back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity. As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
This handy article from Apple explains how
How to move your iTunes library to a new computer - Apple Support''
don't forget to de-authorize your iMac if you don't want to play purchased stuff there
and re-authorize your new macBook Pro
time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine and go for it. You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups of your stuff.

My proxy is bypassed is that done as default witha new macbook pro. I suspect my neighbor did this. I never touch it.

My proxy is bypassed is that done as default witha new macbook pro. I suspect my neighbor did this. I never touch it.

When did your neighbour have access to your new Mac, did you lend it to him?

HT5271 Daughter's homework assignment needs adobe flash plug in. Just got my new MacBook Pro and scare to download program if it compromises the security of laptop. What do I do in this situation?

Daughter's homework assignment needs adobe flash plug in. Just got my new MacBook Pro and scare to download program if it compromises the security of laptop. What do I do in this situation?

OS X will automatically block versions of Flash that are known to be unsafe. As long as Flash is kept up to date, it's reasonably safe. You can minimize your exposure to Flash content by installing the "ClickToFlash" or "ClickToPlugin" Safari extension. Flash elements will then load only when clicked.

I just got a new macbook pro and its saying my iPhone needs to have the new version of iTunes...how do i do this?

I just got a new MacBook Pro for christmas and i went to hook my iPone 4 up to it and it says that my iPhone is unable to hook up because it needs the new version of itunes...how do i do this?

Use the Software Update function on your MacBook Pro

Printing problems with new Macbook Pro and Canon I9900

I would like to know why my printed output on the Canon I9900 is showing up much darker than the image shown on the screen. I have installed the latest driver from Canon and am still having this problem. I have tried the different Colorsync profiles listed for the Canon and have not seen any improvement. I am using 4x6 matte paper by Kodak and have selected the correct paper type and settings.
Macbook Pro Mac OS X (10.4.8)

Hi there,
I would like to know why my printed output on the
Canon I9900 is showing up much darker than the image
shown on the screen.
The answer to your question is simple; colour on a monitor is made differently than colour on a printed image. Monitors combine Red, Green and Blue (RGB) in a process called Additive colour while printers use Cyan, Magenta, Yellow and Black (CMYK) with a process known as Subtractive colour. The matching of what you see on the screen to what you get printed is a time consuming (and expensive) process and often subject to a users preference.
For the home user this process is often too complicated. If you accept that what you see is not what you will get then half the battle will be won. However, that doesn't mean that you cannot get good output on your printer. A number of applications give you the ability to adjust your output. You just need to experiment with a number of settings to get a 'workflow' that you prefer. If you can tell me which application you are using to print from I may be able to offer some values that will help.
Paul

HT4718 I have a new MACBOOK PRO and after running updates IPhoto does not work

After installing Iphoto 9.4.1 from the MACSTORE updates Iphot will not run. I downloaded (.4.1 again and tried to install but it says that the update must be done from the Mac store. But I do not show any updates when checking the mac store and do not know how to proceed. I just purchased the computer and set it up on Saturday. I transferred files from an older Macbook pro.

Hi j,
Gray Screen at Startup (try Safe Boot)
http://support.apple.com/kb/TS2570

The thunderbolt firmware 1.2 update keeps reappearing. I have a MacBook Pro and 2011 Thunderbolt display. Did not discionnect when upgrading to Yosemite (only read the instructions later). Thanks.

Hi There,
I have a MacBook Pro (late 2011) and a Thundertbolt Display. I have recently upgraded to Yosemite. Since then Thunderbolt Firmware update 1.2 keeps reappearing and I cannot complete the update (with and without display connected etc.). Any advice? Thanks.

Hello HTG65,
If the Thunderbolt Firmware Update 1.2: Keeps reappearing try reinstalling it following the steps in this article.
Thunderbolt Firmware Update 1.2: Keeps reappearing and Thunderbolt ports and Target Display Mode may not work - Apple Support
To resolve this issue:
Shutdown your computer.
Disconnect all Thunderbolt devices.
Wait 10 seconds.
If you are using a Mac mini with a Thunderbolt display, reconnect the Thunderbolt display directly to your computer via the Thunderbolt port. Do not connect other Thunderbolt devices at this time.
Restart your computer.
If the Thunderbolt Firmware Update 1.2 is offered, download and install it and restart your computer when asked. If the Thunderbolt Update is not offered, the update has installed correctly.
Reconnect all Thunderbolt devices.
Take care,
Nubz

New iphone 5s won't bluetooth pair with new macbook pro

How is it that Apple didn't fix this? I have all the current software and hardware and there is no way that Apple didn't foresee people wanting to use applications to sync and work across platforms with their $3000 investment in Apple products.
Any thoughts?

As you are probably aware, the bluetooth profiles supported are limited: iOS: Supported Bluetooth profiles
I don't have any idea why. You could however provide feedback to Apple at https://www.apple.com/feedback/iphone.html

I am trying to sync my iPhone to my new macbook pro and it says that it is synced with another iTunes store which it is... is there any way i don't have to delete my content?

I am trying to sync my iphone 4s with my new macbook pro and it says that i need to erase the content because i am connected to another itunes store, which i am but i dont know if i want to erase my content.... any sugustions???

"would it work if i backed up or restored my iphone on my macbook? "
No.
"The computer it is synced to is a dell"
So, copy everything from the Dell to the Mac.
Your iphone will be erased and the content replaced with the content from the new computer. You need to amke sure that everything is on the new computer.
Migrating to a Mac

I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server.

I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server, but this message continues to pop-up several times a day at random intervals. Is there something I'm doing wrong? Or is my computer just having a glitch? Other than that, and a mildly sticking caps lock button, it's working perfectly.
Thank you!

Alright it didn't solve it. Any other suggestions?
I haven't suggested a solution yet. I want to know whether you still get the messages while Time Machine is disabled. Do you? If so, try any or all of the solutions proposed in this thread:
There was a Problem connecting to the...: Apple Support Communities

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Yes, I too had this problem.
I was issued an update from Apple for a new version software as well as a new version of Lightrooom and now it shows up on the desktop and in finder as it should.
MacBook Pro Retina running 10.8.2 (12C54)
Lightroom running 4.1
Hope that helps.
aa

Trying to set up my brand new MacBook Pro and it does not connect with the wifi network I have selected for this purpose. Nothing wrong with the wifi as both my iPad and iPhone are happily connected. Suggestions for connecting to the wifi network accepted

Setting up my brand new MacBook Pro and it will not connect to the wifi network. Nothing wrong with the network which is happily working for my iPhone and iPad! Suggestions accepted for making this connection.

Fixing this is a two step process:
1) System preferences > WiFi/Airport ...
... check [√] Ask to join new networks
"Known networks will be joined automatically.
If no known networks are available, you will
be asked before joining a new network."
2) Remove unwanted networks from the list of "known" networks under
System preferences > WiFi/Airport > (Advanced) > | Airport/WiFi pane ...
Close the window and save changes. If no joy, do a restart to ensure you are playing under the new rules.

I have an ipad I used with a computer which's now broken. I bought a new Macbook Pro and signed into iTunes with my usual Apple id and pw. I connected my ipad to the new Macbook but it won't back up my photos or Apps from the ipad to the new macbook. Help

I have an ipad I used with a computer which's now broken. I bought a new Macbook Pro and signed into iTunes with my usual Apple id and pw. I connected my ipad to the new Macbook but it won't back up my photos or Apps from the ipad to the new macbook. Help

What do you mean " back up my photos or Apps"?
The photo sync is one way - computer to ipad.
You can transfer itunes purchases. Without syncing: File>Transfer Purchases
Copy everything from your backup copy of your old computer to your new one.

Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and f

Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and further more) stops installation and shows Installation ERROR: ASU has quit unexpectedly, Media DB Error: 18. Please help!

run the cleaner and retry installing per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Problem connecting bluetooth headset with New MacBook Pro and OS 10.10. MBP did not recognise the headset (Platonic BeatBack Go2)

Similar Messages

Maybe you are looking for