Problem connecting Canon Pixma IP5200R wirelessly

Hello
My problem is this: I have successfully set up my IP5200R printer to print wirelessly in conjunction with my iMac and Airport Extreme. However, if I temporarily 'switch off' the network's WEP protection which I have to do from time to time to allow a pesky laptop PC to use the wireless network, when I later reactivate the WEP protection the printer is no longer detected and I get an error 306 when I try to print anything. I then have to reinstall the printer using the USB cable to get it back on the wireless network which is very annoying. Is it possible to toggle between WEP off and WEP on without having to reinstall the printer each time?
Many thanks, and apologies for any clumsy descriptive terms used to describe this problem. I hope you get the general idea!

Modesto:
I have a Pixma 800 and I assume setting up yours is the same as mine. You have to connect the printer to the computer via USB cable directly and set it up wired with the setup disc that came with the printer. After you've done this disconnect the USB cable from the computer and connect it to the USB port of your router. In my case, it is the Airport Extreme station. I'm not sure after this but I would go to System Preferences under the Apple and then click on printer and Fax. If you do not find the printer there, click on the "+" and after a time, the printer should show up because the printer driver has been downloaded. I don't know if your printer driver has been downloaded with the Apple OS software. Then click on the Pixma 800 which should show up and then click add. I'm not sure about the rest but you must first make a direct USB connection between the printer and the computer. I hope this starts you on the way.

Similar Messages

I need to connect my Chromebook to my Canon PIXMA MG3520 wireless printer

I'm having problems connecting my Chromebook to my Canon PIXMA MG3520 wireless printer. Because of the Chrome OS, it will not connect like Windows or Mac. I need help before retire, please.

Hello Bama-85,
You are correct, printers do not install the same way on Chrome OS. I looked on the Google Cloud Print site and your Canon printer is indeed supported. Follow this link to setup your cloud ready printer.
I haven't setup a Canon printer via Google Cloud Print, but I assume it's as easy as setting up HP's printers on the print service.
Miles
HP Employee

My new Canon Pixma 7250 wireless printer can no longer find my wireless network. My MAC is, Yosemite 10.10.2. I've run diagnostics and Canon LAN printer setup routine many time. Is there a solution? Can anyone help?

My new Canon Pixma 7250 wireless printercan no longer find my wireless network. (It worked fine until recently) I have a Yosemite 10.10.2. I've run diagnostics and the Canon LAN printer setup routine many times. Is there a solution? Can anyone help?

Turn of the MG and unplug the power cord. Leave it off for about a minute and then reconnect the power cord and turn the power back on. Wait while the device attempts to reconnect to your wireless network - the blue wifi symbol on the MG will flash and then stay on once it has connected. If it keeps flashing then you will have to reconnect the MG to your wireless access point via the control panel on the MG.

Canon Pixma MG6120 Wireless printer - can't get to work with AirportExtreme

Canon Pixma MG6120 Wireless printer - can't install mg6100swin104ejs.exe 64 bit wirelss driver on Windows 7 64bit when printer is registered to 10.0.1.X Airport Extreme. Even if I enable Advanced Port Mapping, Printer Sharing the Canon software doesn't recognize the printer if it is registered wirelessly to the Airport Extreme. Canon senior tech support and Apple senior tech support don't know how to help. Any advice for someone who was able to get a Canon Pixma Printer to work with their Airport Extreme from a Windows 7 64bit PC also connected to 10.0.1.X subnet? Your advice is greatly appreciated. The printer once online is pingable at 10.0.1.9 and I can see SD cards and browse photo's just can't get the Canon software to wirelessly activate/install.

To print from an iPAD using the Lexmark S300 series,you need to download the LexPrint app from this link: LexPrint
Hope this helps.

This past month I have been having problems connecting to my home wireless connection. Previously I had no problems whatsoever. I have tried unplugging the wireless router, turning off the wirless airport, deleting the network name from my list of server

This past month I have been having problems connecting to my home wireless connection. I have a MacBook Pro OSX Version 10.6.8. Previously I had no problems whatsoever. I have tried unplugging the wireless router, turning off the wirless airport, deleting the network name from my list of servers and trying to reconnect this way. These methods have worked temporarily, but the same problem keeps coming back. Most of the time my personal wireless connection does not even come up among the list of available networks. My fellow flatmates have PCs and both of them are able to connect to the network without problem.
The router is a d-link model DIR-615. I am not tech savy, so if any other information need to be provided in order to better understand my situation, please let me know.
Please help me!

If I open the list of networks in a window it says "connection timeout," but if I just select it from the drop down it tries for awhile and then stops with no prompt. When I try to run network diagnostics it says "sorry, we can't connect to the internet" (or some solution-free variation of that)

New problem connecting Canon 20D camera to OS 10.4.7

Hi, I'm new to the forum but have foud you having looking for an answer to a problem i have had. re: New problem connecting Canon 20D camera to OS 10.4.3 and the answers listed for it the problem has been occuring on my 3 Macs, all running OS 10.4.7 and firmware on the new 20D at 2.0.3. The camera would not connect to the Mac with any software.
Canon told me to make sure that the connection mode is set to normal (which didn't work) but today they tell me to change it to P2P and iPhoto recognised the camera and downloaded. Still can't use the canon software (camera not connected / recognised) but they have said that a senior technition will be contacting me so i will keep you up to date.
All the best.

I have an update from my telephone conversation earlier today:
Dear Customer,
Thank you for your recent enquiry regarding your Canon product.
From the information supplied it would appear that the update in operating system is the cause of the problem. We can confirm that Canon are currently investigating compatibility with the recent update of the Apple Macintosh operating sytem OSX 10.4.7. If any software updates are neccessary they will become available from :
http://software.canon-europe.com/
I'll update with more.....

I have an ipad 2, verizon jet Pak router, canon pixma mg3220 wireless printer. All were working until yesterday. Now I get no air printer found message. Have shut down everything and restarted. No change

I have an ipad 2, verizon jet Pak router ang canon pixma mg3220 wireless printer. All were working until yesterday. Now, I am getting no air printer message. Have shut everything down and restarted. It did not work.

See requirements for AirPrint (http://support.apple.com/kb/ht4356):
If your printer supports AirPrint but does not work then:
Your printer might need a firmware update
Your printer must be on the same WiFi network
Your router must support Bonjour (Zero-configuration networking).
For troubleshooting:
Turn Off iPad, WiFi router (remove from power), and Printer (remove from power).
Turn on WiFi router
Wait 30 seconds
Turn on printer
Wait 30 seconds
Turn on iPad
Try to print.

Connecting Canon Pixma 860 Printer Wirelessly

OK, I give up! Can someone please give me the steps on how to connect my Canon Pixma 860 printer wirelessly to my iMac? I am running Snow Leopard, all drivers are up to date, and I have a 2Wire AT&T modem/router. I've Googled, "forumed", called tech support and prayed, to no avail. This can't be this difficult! I would greatly appreciate assistance on this. It's now become a matter of principle to me. Thanks all....

Modesto:
I have a Pixma 800 and I assume setting up yours is the same as mine. You have to connect the printer to the computer via USB cable directly and set it up wired with the setup disc that came with the printer. After you've done this disconnect the USB cable from the computer and connect it to the USB port of your router. In my case, it is the Airport Extreme station. I'm not sure after this but I would go to System Preferences under the Apple and then click on printer and Fax. If you do not find the printer there, click on the "+" and after a time, the printer should show up because the printer driver has been downloaded. I don't know if your printer driver has been downloaded with the Apple OS software. Then click on the Pixma 800 which should show up and then click add. I'm not sure about the rest but you must first make a direct USB connection between the printer and the computer. I hope this starts you on the way.

Can my iMac OSX 10.8.5 connect to my Canon PIXMA 452 wirelessly

My iMac doesnot connect to my Canon Pixma 452 Printer when it has for the last 3 months?

Hello there, lbaer.
The following Knowledge Base article offers up some great recommendations for troubleshooting printer issues:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Problems with Canon Pixma iP4300

I just purchased a new Canon Pixma iP4300 printer and can't find it in Printer Setup Utility to add as a new printer.
When I connect it directly to my MacBook Pro (Core Duo) it is invisible. I have downloaded the latest drivers available from Canon. Given the point below I am fairly certain it is not a problem with my USB cable either because the printer is recognised when I plug my USB printer cable into the Airport Express.
Confusingly, I can connect to it through my Airport Express base-station using Bonjour. A problem with this connection is that it does not allow me to use the utilities - so, for example, I can't align the print heads - or use any of the other software that came with the printer because it doesn't recognise the printer over the wireless network.
Does anyone have any suggestions?

And as soon as I posted this I found a spare USB cable and tried that... and it worked.
I guess the USB cable connects properly with the Airport Express and not with my MacBook Pro. Curious. Very curious.

Airport Express and Canon Pixma IP4500 wireless printing

Hello,
I bought an Airport Express and set it up as an additional wireless network at an 5Ghz N mode. It's conneted to a Linksys Wireless router modem/router. Internet connectivity is fine from both iMac 24 and MacBook. Both use OSX 10.5.4.x
Airport is set up via USB with a Canon Pixma IP4500 inkjet. When connected directly to the iMac, it prints fine. When I connect the IP4500 to the Airport Express, I get an Error 300 - basically saying the printer is not responding.
The whole point of the Airport Express was a faster network for both wireless printing and playing iTunes wirelessly from the MacBook.
Any tips on what could be a common problem for this printer?
Thanks

I had a similar problem
I had to "add a new printer", so one printer refers to the directly connected printer and the other refers to the printer connected to the airport (bonjour).
Greetings.

Printing Problems with Canon Pixma MP830 under 10.5.5.

Hi All.
Strange one here. I'll try to keep it short.
A client just bought a 24" iMac (running Leopard 10.5.5) and all was great until they tried to connect their Canon Pixma MP830 to it. The client installed connected the printer to the USB port in back, installed the software from the Canon CD, and soon discovered they could not print from any application -- however, they could do a test print (cleanings, alignments, test, etc.) without issue.
They ended up calling both Apple and Canon for several sessions and no one could figure it out.
So I get the call. I remove the printer completely from the system, emtpied the trash, repair permissions, blew out the user and system cache, restart and installed the fresh Leopard-friendly drivers from Canon. I also ran the firmware upgrade for the printer, which took just fine. When I did a test print -- no problem. When I tried to print from Safari -- nothing.
So I then I thought I would try the Gutenprint v5.1.3 drivers for that printer. Nada.
I downloaded the GutenPrint 5.2.0-beta4 drivers, still nada.
At a last ditch effort I tried a new USB cable, still nada.
Curious if anyone has seen this problem and perhaps as a solution? Aside from buying a new printer that is (they are already shopping, but not happy about it).
Thanks!

Hi there,
In reading your post I'd be curious to see the cups error log. Given that the Gutenprint drivers would not print also, I would say that something is wrong with the core printing system. The log would show which filter is causing the spooler to stop.
Thinking that it is CUPS related, I would try resetting printing system (if you haven't done so already). Then I would add the queue again using the Gutenprint driver for starters. If this doesn't work then no need to try the Canon driver.
Note that the Canon test print is not an actual print but an instruction to output the inbuilt data. But the test print via the Gutenprint printer queue is a page generated by CUPS. So this would suggest that the CUPS usb backend is okay and something further up the spool creation process is failing. Again, the cups error log would give some clues as to what is going wrong. As to why both driver sets are failing is interesting...
PaHu

My Macbook Pro will not find or use the downloaded driver for my new Canon Pixma MX479 wireless printer

I have been fussing for hours with a Canon Pixma MX479 printer I received as a gift. The printer was obviously designed for PC control, and has terrible instructions for setting up the wireless capability, but I finally found a few hints online about how to add a WPS printer to my Airport Extreme, so I can finally detect the printer. However, when I try to add the printer, either under System Preferences or while just doing a print, my MacBook requires that I download a driver from Apple to use it. When I attempt to do that, I get a message the driver software is unavailable from Apple and that I should contact the manufacturer for the driver. I have already downloaded and installed the Mac OS driver from Canon twice, but my MacBook apparently can't find it. So I am forced to use Airprint in order to communicate with the printer. I would like to use the proper software to make sure I am accessing all of the features the printer offers. Can anyone tell me how to associate the downloaded driver with my printer when I am attempting to add it?

Hi Dwntso!
Welcome to the Canon Forums and thanks for posting!
So that the Community can help you better, we will need to know any error messages you're seeing either on your computer or the printer, and the version of OS X you've got on your MacBook as well as the way you intend to connect to your printer (USB or networked via WiFi or Ethernet).
Any other details you'd like to give will only help the Community better understand your issue!
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.
Thanks and have a great day!

Trying to connect canon MG 3522 wireless printer with no success

i am trying to connect my new canon MG 3522 wireless with no success, via wi-fi. can u help me please?

Hi us-1flbug,
You can try installing the drivers for the printer from the Canon USA website to ensure that the latest versions are installed. When installing the drivers, please ensure that any antivirus for firewall software that is on your computer is temporarily disabled, as these programs can sometimes block the printer from being detected on the network. Once the printer is detected successfully, the protection software can be re-enabled.
Please click here to go to the Drivers and Software page for the PIXMA MG3522. Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "DRIVERS" section and click the FULL DRIVER AND SOFTWARE PACKAGE file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once the file has been downloaded, please double-click on it and follow the prompts to install the drivers on your computer.
Hope this helps!
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Lan problems with canon Pixma mp990

I've just got a Canon Pixma mp990 printer - mainly because og the wireless connection. The installation worked fine on my girlfrinds Macbook with Leopard. But on my own Macbook Pro with snowleopard, i can't make it work.
I can detect the scanner - but not the printer. I've downloaded the newest drivers on canons website. Iv'e tried canons support - but the gave up. Told me it had something to do with my Snowleopard installation (apperently there was a 'other printer' button missing in the 'add printer' window. And therefor they couldnt help me!)
I've also tried installing the drivers on a new user-account on the mac - agian with no luck.
Hope someone can help me...

With the correct Canon drivers installed, either via the Canon web site or via the Apple download, you should be able to get the MP990 working. I have the MP980 and have been printing via wireless for a couple of months now with Snow Leopard.
To add the MP990 as a network printer you need to be patient. The scanner portion of the machine appears very quickly but the printer portion, which uses the canonijnetwork protocol to publish the printer on the network, takes some time to appear (usually no longer than 10 seconds). So, when you click to Add the printer and select the Default browser view (the More Printers menu mentioned to the OP by his Canon support is used for 10.5, not 10.6) you will see the MP990 as a Bonjour Scanner very quickly. If you don't see the scanner, then something is wrong with your MP990 wireless setup. After you see the scanner just wait with the Default window open. The printer should appear after a short while. When it does, select it - the Print Using menu will automatically change to Canon MP990 series.
If the MP990 as a printer does not appear, then do you have Parallels 4 or earlier installed? This is known to stop the networked Canon printer from appearing in the Default browser view. This issue is resolved with Parallels 5, but there is an upgrade cost involved. If you don't want to part with your money, then check this forum by searching Parallels. There is information about how you can stop the Parallels virtual network ports via Terminal so that you can see the networked printer.
Pahu

Problem connecting Canon Pixma IP5200R wirelessly

Similar Messages

Maybe you are looking for