Problem Connecting iBook to Internet via Airport

I just bought a used 14" G3 iBook 700MHz w/ Airport card and can't get it to connect to the internet via my home wireless network. The home network has no problems connecting w/ our MacBook, 12" PowerBook and 13" G3 iBook via Airport. My wireless router is a D-Link DI-624M. The new (used) iBook had no problems connecting to the wireless network at our nearby Apple Store and connects to the internet correctly when I plug the ethernet cable directly out of the cable modem into the computer. The iBook apparently has no problem connecting to the wireless network in our house (full signal shown in the menu bar and, when doing the Network Diagnostic process, it shows that the Airport connection is good). But I keep getting the error message in Safari: "You are not connected to the internet." Any suggestions?

Hi, and welcome to Apple Discussions
Does it have this problem at exactly the same time your other computers are connected?
The only time I get that message is when our ISP is having problems or the modem needs to be reset.
Apple's tips for connecting wirelessly can be found here:
http://docs.info.apple.com/article.html?artnum=303595
Good luck.

Similar Messages

  • Connecting iBook to internet via Airport

    I just bought a used 14" G3 iBook 700MHz w/ Airport card and can't get it to the internet via my home wireless network. The home network has no problems connecting w/ our MacBook, 12" PowerBook and 13" G3 iBook via Airport. My wireless router is a D-Link DI-624M. The new (used) iBook had no problems connecting to the wireless network at our nearby Apple Store and connects to the internet correctly when I plug the ethernet cable directly out of the cable modem into the computer. The iBook apparently has no problem connecting to the wireless network in our house (full bars shown in the menu bar and, when doing the Network Diagnostic process, it shows that the Airport connection is good). But it is not connected to the internet. Any suggestions?

    ooops, I just realized this is the G4 forum. I'm moving this post to the G3 forum. Sorry

  • Trying to connect iBook to internet via Airport, iMac G5, and cable modem

    The iBook says it's connected to the G5's local Airport network, but Safari says it's not connected to the internet. I must be missing a setup step, but have no idea what.
    This is my first use of Airport other than using the iBook at Wi-Fi spots.
    Any suggestions? Please and thank you!
    iBook G3   Mac OS X (10.3.9)   iMac G5, OS 10.4.8

    Do I need an Air Port Base station or a router? After I set up everything on my mac mini, what steps do I need to follow on the iBook to get Internet access?
    The AirPort base station is a router. You are not limited to AirPort base stations as non-Apple 802.11g routers (like those from Belkin, D-Link, or Linksys) will work just as well. Using a router, your network configuration would be something like the following:
    Cable modem > (Ethernet cable) > [WAN] router > (wireless) > wireless computers.
    The set up for both computers, to access the router, would basically be the same.
    To setup AirPort for High-Speed Cable Internet connectivity:
    System Preferences > Network > Show > Network Port Configurations
    - Verify that an AirPort option exists. If it does not, click "New" to create one. (Note: If you are unable to create an AirPort configuration, the AirPort card in your computer either doesn't exist or it is not recognized.)
    - Verify that AirPort is "On" (checked)
    - Verify that AirPort is at the top of the list. If it isn't, you can drag it to the top.
    Systems Preferences > Network > Show > AirPort
    AirPort tab
    - By default, join: Automatic
    TCP/IP tab
    - Configure IPv4: Using DHCP
    - Configure IPv6: Automatically or Off
    Proxies tab
    - Configure Proxies: Manually
    - Select a proxy server to configure: <All proxies should be unchecked unless you specifically require a proxy for Internet access.>
    - Exclude simple hostnames (unchecked)
    - Bypass proxy settings for these Hosts & Domains: <leave blank>
    - Use Passive FTP Mode (PASV) (checked)

  • Help, I cannot connect to the internet via airport with either my Imac or I-Pad.  Connecting via ethernet works okay for Imac.  I can connect wirelesssly with my windows laptop.  I have reset my router, created a new network. It was all okay on Monday

    Normally I have my IMac, I-Pad and Windows Laptop all working on my home network via wi-fi. This week I find that I cannot access the inetrnet on my IMac or I-pad via wi-fi but I can connect to the internet via wi-fi with my windows based laptop.
    The airport diagnostics (reds/yellows) indcate that I am connected
    I can access the internet if I plug my IMac into the router via an ethernet cable
    I have restarted the IMac and the I-Pad, rebooted the router and created a new network.  None of these changes has made a difference.  Does anyone have any ideas please?

    You have not completed your profile so we cannot assist you. In  your profile you will indicate critical information such as what version of OS X is installed on your computer and the computer's configuration. If you do not know how to complete your profile please click Profile Update

  • Connecting to home internet via airport - always need to restart the router

    I set my home PC as the main station to connect to my ISP. With a wireless router (linksys Wireless-B), I used to share the internet connection to other wireless devices, for instanace, my palm and ibook, my sister's notebook PC and Pocket PC. once, I took my ibook to an internet cafe, which gives free wireless connection facilities. My ibook obviously scanned the wireless network, and was connected (as I noted from the Summary of the "internet Connection". but, when I activate Safar, it said that it could bring me to any website because my computer is not connected to internet. it's very strange, as the Internet Connection said it's connected to the wireless network. The Safari page suggests me to run "network diagnosis". i follow the instruction, and it says I should restart the router and then it would work. I didn't succeed. A while later, it connected. I thought it was okay.
    Then, this problem comes up even when I am using my home's internet connection via the airport. I use DHCP to connect to my home internet connection. though the airport summary page said that it's connected to my router (the IP address is my router's address), again, Safari said my computer is not connected to internet, so it didn't work. I followed the instruction of the Network Diagnosis, it again asked me to restart my router device. I also noted from the Airport Section of the Network Perference that, it says the airport has a self-designated IP addres, so it may not connect to the itnernet. later on, I retarted the router and the modem (without turn on my home PC), the ibook connected to the internet.
    i checked the router setting of my home PC. I'm sure that it's open to all wireless user. Strange through, after I update the settings (even though i didn't make any changes, perhaps the action of 'save settings', it's kind of equivalent to the action of restarting it), my ibook's connection works. When my retarted my PC and ibook, the connection problem comes up again.
    it's very frustrating. Does it mean that I need to restart my router everytime? What about if I want to connect to wireless hotspot outside?
    Please please help

    Your problem description is complicated, making it hard to figure out what exactly is wrong. Unfortunately, WiFi does this quite often.
    To avoid this kind of problem, you should set up different Locations in your Network Preferences for different places that you connect up. That is, make one location for your Internet cafe and another for home. Leave the Automatic location alone.
    For locations you know you are going to connect by WiFi, go to Network Port Configurations and drag Airport to the top of the list to give it priority.
    If you have a location, where you want an ethernet connection or want to use your internal modem only, then drag those options to the top. Get the idea?
    MacOS seems to get confused sometimes when you switch back and forth between different connections all the time. This will not happen if you tell MacOS where you are by explicitly setting a location.
    To get out of a situation where MacOS thinks you are connected to non-existent ethernet connection, go into
    /Library/Preferences/SystemConfiguration
    and delete the NetworkInterfaces.plist file.

  • I can no longer connect to the internet via Airport Extreme.  HELP!

    Over the weekend my Macbook told me that my Airport extreme firmware needed to be updated, so I did that, now I have no internet connection from the Airport. I have no problem connecting to the Airport itself, but I have no actual internet connection. The connection is fine when I plug an ethernet cable directly into the computer.
    I really hope someone can help with this!

    Hi DaveX83 and welcome to the discussions.
    A few things to try.
    Press the reset button once on the back of your Extreme and let it restart. Check for proper operation.
    If no help there, keep the ethernet cable connected, and open Airport Utility. Click on Manual Setup near the bottom of the pane. On the next screen click the Airport icon at the upper left of the pane, then click Wireless in the line just below that reads Summary - Time Capsule - Wireless - Access.
    Check to see that your wireless is set up, security set up, passwords, etc. You may need to reconfigure your wireless settings again and update the Extreme to store them and restart.
    Hope this helps.

  • Problem connecting N8 to internet via Talk Talk ro...

    Hi there
    Could somebody help me resolve my problem connecting nokia N8 to internet via Talk Talk router with WEP. I have just updated my Nokia’s software and now I can use an internet because I’m getting error. I can connect to the router, there is a status “connected” but then the internet not working. I would appreciate if somebody would have given some clue how to fix that.
    Thanks  

    Hi Sylwunia10,
    Thank you for your post and welcome to the forums!
    Have you tried deleting your current access point setting and creating it again? You can do this by navigating to Menu > Tools > Settings > Connections > Access Points. Select your WLAN access point, delete it and create a new one following these instructions.
    If this does not fix the issue, you can try to soft reset your phone and WLAN router. 
    Dial *#7780# to soft reset your device, this will return the phone to factory settings without removing any personal data. Even though your data should not be affected by the reset, it is a good idea to back up your phone first using Nokia Suite.  As for your router,  please refer to the manual on how to reset it.
    Let us know if this helps,
    Puigchild
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Trying to Connect iBook to Internet Via Windows PC Verizon Wireless Card

    I have a Windows PC laptop (IBM Thinkpad) that has a built-in Verizon wireless broadband card, which allows me to connect to the Internet from any location. I'm trying to find a way to share this connection with a Mac iBook. I can hook the two computers to each other with an ethernet cable, but then I can't figure out what to do to allow the iBook to access the PC's internet connection?
    BTW - the PC is running XP, the iBook OS 10.4 (and Airport, although this doesn't seem like an Airport-related issue).
    Any help would be greatly appreciated. Thanks!
    Matthew

    Do I need an Air Port Base station or a router? After I set up everything on my mac mini, what steps do I need to follow on the iBook to get Internet access?
    The AirPort base station is a router. You are not limited to AirPort base stations as non-Apple 802.11g routers (like those from Belkin, D-Link, or Linksys) will work just as well. Using a router, your network configuration would be something like the following:
    Cable modem > (Ethernet cable) > [WAN] router > (wireless) > wireless computers.
    The set up for both computers, to access the router, would basically be the same.
    To setup AirPort for High-Speed Cable Internet connectivity:
    System Preferences > Network > Show > Network Port Configurations
    - Verify that an AirPort option exists. If it does not, click "New" to create one. (Note: If you are unable to create an AirPort configuration, the AirPort card in your computer either doesn't exist or it is not recognized.)
    - Verify that AirPort is "On" (checked)
    - Verify that AirPort is at the top of the list. If it isn't, you can drag it to the top.
    Systems Preferences > Network > Show > AirPort
    AirPort tab
    - By default, join: Automatic
    TCP/IP tab
    - Configure IPv4: Using DHCP
    - Configure IPv6: Automatically or Off
    Proxies tab
    - Configure Proxies: Manually
    - Select a proxy server to configure: <All proxies should be unchecked unless you specifically require a proxy for Internet access.>
    - Exclude simple hostnames (unchecked)
    - Bypass proxy settings for these Hosts & Domains: <leave blank>
    - Use Passive FTP Mode (PASV) (checked)

  • HT3546 Although I am connected to the internet via Airport the internet connection does not stay on and comes with a "time-out" message. The airport connection is still on however. I have recently bought an old Mac Book 1.1.

    I have recently bought an old Mac Book after having purchased an iPhone and iPad.
    The internet connection (via Airport) keeps timing out while the Airport connection is still on as confirmed by the Mac and shown on the task bar.
    Any ideas?
    Thank you,
    Peter

    Only fixed this in the last day or two . . .with this!
    https://discussions.apple.com/thread/3588501?start=0&tstart=0

  • Password doesn't save when connecting to the internet via Airport

    When I try and connect through Airport to my wireless internet connection an error message comes up almost immediately with the message that the "connection has timed out".
    The only way I can get the internet through Airport is if I run through the Network Diagnostics scheme and re-enter my password which I have previously entered and checked off to save.
    This is getting really frustrating every time I turn on my computer and it has only been an issue since I upgraded to Leopard. I have all the current updates and drivers installed.
    I've checked Keychain Access to see if it was being overridden by an earlier password but that's not the case. What else can I do to automatically have Airport connect to the internet?

    Have you deleted all the Airport keychains and created a new location ? That might fix it.

  • My iMac can't connect to the internet via airport

    I brought a third computer, iMac G5, into the house. The first two Intel Macs connect to the internet. The third doesn't see the network. How can I connect

    Harry Katz wrote:
    I brought a third computer, iMac G5, into the house. The first two Intel Macs connect to the internet. The third doesn't see the network. How can I connect
    How are your Intel Macs connecting to the Internet? If wirelessly, what type of Wi-Fi equipment are you using? Is your wireless base station configured to support 802.11b or 802.11g clients? If you connect that iMac G5 to the base station with an Ethernet cable, can it connect to the Internet?

  • Why won't my Power Book connect to the internet via Airport (AEBS) ?

    Since getting a new Broadband provider and ADSL modem (before I had cable modem which worked perfectly) which is cabled up to my EMAC (with Airport card) I cannot connect my Power Book to the internet ? I have reconfigured and hopefully set the preferences correctly on both computers i.e. Personal Web sharing- On, Internet sharing -On etc.
    I can send files between the two computers and they connect to my network fine, but the Power Book cannot get the internet. Can anyone please help ?

    Personal Web Sharing is not necessary.
    I believe VickyMC is using her eMac to share the Internet account to her PowerBook. She has Personal Web Sharing enabled so that the ports are opened to allow access through the eMac to the Internet.

  • Network prefs: "connected to internet via airport"... but can't go online??

    I've got steady green lights on my airport express and modem/router; and in Network Preferences it says that I am connected to the internet via Airport (green light here too). BUT, I can't get online with any of my browsers or my mail client. What's going on here? Help appreciated.
    Thanks
    eMac 1GHz, iBook 14" 1.33GHz   Mac OS X (10.4.8)  

    If you have a Modem Router combined and an Airport Express
    The Express must be set up to NOT DISTRIBUTE IP's.
    You do not mention what brand Modem or Router or Modem /Router combined. Your network confiquration can very a little depending on what you are using.
    If you are using all Apple Airport products the confiquration is pretty straight forward.
    If you are using 3rd party products then the set up can be a little different.
    From what you say in your post you are using 2 routers, my quess is the Express is set up to distribute IP's and if your other router is set up this way then thats your problem.
    Don

  • Can't connect to Internet via Airport but CAN via Ethernet

    Yeah so I have tried TWO different of my AX's and can not connect to the internet via EITHER even though Network Status says "you are connected to the internet via Airport". But, if I hook the ethernet cable directly to the computer from the modem it connects to the internet fine. What am I missing. Oh yeah, and on one of the AX's the "music" tab does not appear next to the "WDS" tab thus not allowing AirTunes on that AX, any ideas on that too? PLEASE HELP!!

    CONNECTED!! After resetting the modem, llike you suggested, I am able to get the wireless network back up and running, BUT...I am still having problems with one base station not showing the "music" tab and thus not letting me stream music to it. When I hit "configure" the tab shows for a quick second then disappears. Any idea?

  • 24" imac 2.4 says connected to internet via airport--but does not

    I just got a new 2.4ghz 24" aluminum imac. There are three other macs in my house, all of which connect to our wireless network and are able to browse the internet. This new computer can connect to the network, yet it always has one of two problems: either it says it is connected to the network, but can't access the internet, or it says it is connected to the internet via airport, but when you open your web browser, no such luck. Many times when I open the network preference panel, there is no router number assigned. Sometimes there is. I can connect to other networks in the neighborhood that don't require a password just fine (how I'm writing this). Why can this new machine not connect, when all three of the other macs in the house have no problem?
    anyone, please help. this is frustrating.
    thanks,
    keegan

    OK but, like you, my other machines (PowerPC iMac and Power Book) did seem to work OK while the new iMac was playing-up. It was only when I noticed that the Old iMac had not downloaded some podcasts that I started to look at the router. I now remember having a similar problem a few years ago - frequent failure to automatically log-in to the router, occasional failure of manual log-ins and slow/unreliable connection once logged-in. A new router fixed the problem. It's a real pain but there you are. Must remember to keep receipt of current router and kick-up a fuss if it fails within the guarantee period.
    Sorry if this doesn't help but I thought it worthwhile posting my experience over the last 2 days.
    Have you tried connecting to your router by ethernet?
    I'll let you know if the problem returns but all is sweetness and light at present.

Maybe you are looking for

  • MSI DK790 GX (non platinum) - Flashing bios

    Hello there! First things first, please accept my apologies if my language seems wrong. I'm not a native english speaker, and do not hesite to ask to repeat. Second thing, i've read some similar topic but i'm still confused about how i have to flash

  • How to setup the email in SAP netweaver

    Can anyone please help me while setting up the email within the SAP netweaver. Thanks Inadvance John

  • Syclo Work Manager 6.1 + SAP Connection Issue

    Hello, I have been trying to setup Syclo Work Manger 6.1 and testing the connection between Work Manager and SAP ERP System. I have updated the connectTest.bat with the ERP login details uder test_user, I get an "caught exception null" and the test i

  • Possible solution for all you that have skipping songs, & scratchy sound

    Hi All, After upgrading to 7.02, I was extremely annoyed with the performance. But here's what I found and did. In a nutshell, you uninstall the new version and install a 6.05 version or earlier. I'll include some links to what I found and hopefully

  • Process - xfaForm variable not available

    Hi all, I have a bit of a newbie problem. We have Livecycle (8.0.1) deployed and I'm trying to get up to speed on things so am working through the "Creating Your First LiveCycle ES Application" found in the Workbench help. I'm running into a problem