Problem connecting iphone to pioneer DEH-7950UB car stereo

HAllo
I have Iphone 2g 16GB fireware 2.2 and pioneer deh-7950ub that support
ipod.
the system have usb jack to connect the the ipod cable.
when I connect the iphone through the iphone cable the iphone is only charging and dont sync with the car system ?
can you help me solve the problem ?

someone ? please ?1

Similar Messages

Connection errors with Pioneer AVH P3100DVD Car Stereo after iOS4.1 Update

I just upgraded to iOS 4.1 and now my Pioneer AVH P3100DVD car stereo has a "skipping" problem like a record or CD with a scratch in it when connected to my iPhone 4.
I've tried disconnecting the USB cable, restarting both my iPhone 4 as well as my car stereo - nothing seems to work. Think of it as watching a streaming video having buffering issues, you hear about a half second of audio, then it drops out, then another half second of audio, drop out, etc.
Plugged in my Classic iPod which still works fine so I know it's not the stereo unit or the cable connection. Has to be something caused by the new software upgrade?
Worked flawlessly with my iPhone 4 up until installing the upgrade yesterday and now haven't been able to find a remedy to the problem. It's as if the stereo keeps dropping the connection every half second.
Anyone out there with the same problem and found a remedy?

LOL...I am happy that I am not the only person to have this problem.
Here is my thread.
http://discussions.apple.com/thread.jspa?threadID=2574519&tstart=0
I too have the same problem with the same Stereo. Except...I have had this problem once before on iOS 4.0.1 When I received my phone new from the factory, it had 4.0.1 on it. It had this problem with my 3100DVD radio too. However when I did a restore on my phone, it fixed it up to a point. I could listen to Pandora without any skips. My ipod would only work without skips if I setup the radio to give the IPOD controls.
Ever since I "Upgraded" to 4.1 it skips on my stereo no matter what I do. I haven't had a chance to do a restore yet. When I do one, I hope that it will work again.

IPhone won't work well with Pioneer DEH-5900IB Car Stereo

I have installed Pioneer DEH-5900IB recently and have connected my iPhone (firmware ver. 1.1.1) to this car stereo through Pioneer CD-I200 (interface cable for iPod). Then the iphone certainly asked me whether I want to switch to the airplane mode, and I said no. The music played immediately, HOWEVER the iphone could not charge (i.e. no lightening symbol), as well as 5900IB showed the message "error a0" with no playlist showing up. I could still change the song by using the navigation button (i.e. by clicking the wheel left or right side) though. Is there any possible solution to this problem?
I don't really want to connect the iphone to this car stereo via AUX, since the sound quality it could provide was obviously inferior to the direct connection through CD-I200.
Any suggestion, idea or even rumor on this will be really appreciated.
Thanks!
- SW

Hey swkim... I just spent an hour outside fiddling around with the iPhone/Pioneer and I think I may have found a temporary workaround... let me know if this works for you!:
With the car ignition on, and no iPhone attached to the CDi200 cord, for this first time only (to get out of the 'Error-A0' rut) reset the Pioneer reciever (on mine it involves pushing that small indentation with a pen on the front of the receiver). Hard-Poweroff your iPhone (holding the top button until the red slider comes up to power off the iphone and go ahead and turn the iphone off). The receiver should be on in its reset mode (ie. demo mode or whatever). Now, plug in the CDi200 cord into the powered-off iPhone. It should activate the iPhone. Don't press any buttons - just let it power up by itself. In 100% of the cases i've tried this way, the Pioneer Receiver will switch to the iPod state and stay in the Ready functional mode until the iphone fully boots up, and then it will start to play, charge and work normally without the dreaded error-A0!
Now - the trick to getting this to work each subsequent time without having to reset the receiver each time (because if we have to reset the receiver each time it would be pointless - our tuner settings are gone, possibly BTooth settings gone if your receiver has that option, etc):
When you're ready to stop the car or turn off the ignition, do so. Feel free to detach the faceplate, etc if necessary. the Iphone in the cases I tried were still attached to the CD-i200 cord as I turned off the machine. After the receiver powered off, I unhooked the CD-i200 cord from the iPhone. When I was ready to start it up again, I first turned on the ignition, hooked on the receiver faceplate, and allowed it to boot up (no need to 'reset' the receiver). The trick is though that I made sure the iPhone is now hard-powered off again before attaching it to the CD-i200 cord. Now, attach the powered-off iPhone to the cord. it will cause it to turn on and boot up again... but now (in 100% of the times I've tried so far), the receiver will now see it in its Ready state and will work!
Anyways, let me know if this works for you. If this does, it would suggest that the problem may be with how an iPhone left powered-on tells the receiver where to resume playing a song. The upside of this workaround is that it doesn't require a reset of the receiver each time (thankfully) and, while connected in a working state (ie. non error-A0 state), it also survives Source changes so one is free to change to the TUner mode, etc, and back to the ipod source. The downside though is that one has to hard-power off the iPhone each time before connecting it to the receiver (annoying but not a biggy for me as long as this works), and instead of resuming from the spot in the song last played, it starts from track1 since the iPhone was reset (also not a big deal for me). The other downside I found is that, if the order sequence of the above workaround is changed and I end up with an 'error-A0' message, then I have to go back and reset the receiver (annoying since I'd lose my Tuner settings, ?possibly my Equalizer settings, and ?possibly my BTooth device settings on my DEH-7900BT)...

Iphone to Pioneer deh 7900?

Hi!
I have recently bought an Pioneer deh 7900 car sterio. When I am trying to connect my Iphone to it to play music from it, the pioneer dosnt find it, it just keeps saying " format read" and nothing is hapening, exept that the iphone is charging. The sterio shuld be ipod connecteble through the USB port. Whats wrong? do I need a CD-I200 cable to control my iphone? shudent it just go and go through the USB port and in to the iphone whith an regular ipod/iphone cable?

torva,
I did a little bit of research on [Pioneer's website|http://www.pioneerelectronics.com/PUSA/Products/CarAudioVideo/DIN/DEH-P 7900BT] for that stereo, and it does say:
Attention current and future iPod owners: iPod control is now built-in your Pioneer receiver - once connected to the CD-I200 cable (not included), you can control your iPod through the headunit and even view album, artist, and other music info on its display.
So it does sound like you need that cable, but you would want to contact Pioneer for more information.
Hope this helps,
Jennifer B.

Connecting iPhone to Sony Xplod in car

Hi!
I'm having issues connecting my iPhone 4 to my new sound deck (Sony Xplod MEX-BT3850U). I've followed all of the steps in the user manual for the deck and the bluetooth light is lit up, but the iPhone keeps searching and doesn't find the stereo. I'm using OS 4.1, and I've also tried using a 3G and a 3GS but none of them recognise it.
Any ideas?

Hi dcrognale,
I have a Sony MEX-BT3800U, and i thought that this connection could not be made coz i tried it with the first iPhone years ago. thank you for the post. Do u mind sharing how u reset ur car stereo?
thanks

Any ideas on problem with ipod and alpine cde-9881 car stereo

I have an ipod 60gb v 1.2.1 and a new Alpine car stereo with Ipod connecting cable. When connected, the stereo message reads IPod searching. It never assumes control of ipod,or quits searching. I have reset and restored my ipod, had the apple geek at genius bar check it out. My ipod does not play on the alpine ipod ready stereo in my husband's car, nor the stereos in Car Toys. My husband's 30 gb ipod plays on the stereo in his car AND my car. Help! Anyone have any ideas on how to fix this problem? Alpine is telling me it could be a software problem with my ipod, and to revert to an earlier version of itunes. But my husband's ipod works in my car. So I did a restore using his computer and itunes....no luck. am interested in any ideas on a possible solution!!
Thanks in advance
md

Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore
Towards the end it says "If after restoring your iPod, the message described above reappears, the iPod drive letter may need to be reassigned. See the "Change the Drive Letter" section of this document for steps to assign a different drive letter" which contains a link to this article: Windows confuses iPod with network drive and iTunes may exhibit strange behavior in relation to the iPod.

Connecting ipod nano 7th generation through car stereo usb cord.

When I connect my ipod nano 7th generation to my car stereo through a usb cable, (using a lightning adapter), I am not able to control my music through the ipod, but only through the car stereo system. The car stereo system won't allow me to play my playlist on shuffle mode nor can I control the ipod itself through the device when it's plugged in. I have to unplug it and make new playlist selections. Any solutions?

I am having the same problem with mine. I have a Hyundai Sonota and can pair with my Ipod Nano but cannot connect. I also would appreciate any help. Thanks!!

IPhone no longer plays through car stereo after OS 4 upgrade.

My wife and I upgraded to OS 4 on 6/21. Both will no longer play or charge through the USB connection to our car stereos. We both have Kenwood decks but different models.
Any ideas?

Did you look here?
http://discussions.apple.com/thread.jspa?threadID=2470321&tstart=0

App to Listen to Iphone (Calls & Music) on my Car stereo/radio

Is there an APP out there that would allow me to listen to my iPhone calls, music podcast etc. in my car my tuning to an unused FM radio frequency?

I am looking for an APP and/or accessory that will allow me to listen to my iPhone calls and/or music via my car stereo radio.
Is anything available?

Problems connecting iPhone to tv.

After upgrading my iPhone 3GS to iOS 5, I cannot see video when I connect to my flat screen tv through RCA jacks and apple video cord. What gives?

Same problem here upgraded to ios 5 on my 3gs tried to connect to tv and having none of it can hear sound but have no picture,tried it on both of my tv's and both the same there is no settings on phone for tv out what gives?????????

How to connect iphone to Pioneer receiver

Tryng to connect my iphone to watch videos on our Pioneer Receiver. Can get sound but no picture using the HDMI cable. Receiver is a VSX-23TXH and says it is iphone compatible.

Hi Jgunnoe4333,
First you'll need to restore network defaults on your printer. From the printer front panel:
1. Press the Wireless button.
2. Choose the option for Wireless Settings.
3. Choose the option for Restore Network Defaults.
4. Choose Yes.
The wireless light should start blinking again.
Secondly, from your PC:
1. Make sure your computer is connected to the new network, and if wireless, make sure the network connection is saved and connects automatically.
2. Click Start>All Programs>HP>Deskjet3050>Printer Setup & Software.
3. Select the Connect a New Printer Option.
4. Select Network/Wireless install.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Solution to connect iPhone 6p Bluetooth to your car

I finally got my new iPhone 6plus to connect to my car. I have a 2014 Hyundai Santa Fe (hopefully, this solution may work for any car, but I dunno). In my Hyundai's bluetooth settings, I erased any and all phones that had been paired with the car. (Apparently, my car kept trying to connect the old phone.) After erasing the old phone I was able to pair the new iPhone 6p to my car. In short: delete all old phones from your car's bluetooth memory and your new iPhone 6p should work.

Try 0000 or 1234. If that doesn't work call the closest Mercedes dealership.

Problem connecting iPhone to keyboard

Hi,
I have since a couple of weeks a new iMac.
When I want to connect my iPhone with the USB cable to my keyboard, I get the message that there is no bluetooth keyboard and the keyboard shuts down.
But I don't have a bluetooth keyboard...
This problem started when I received a new iPhone 3G because my 'old' iPhone 3G was broken.
Can anyone help me with this?
Best regards,
Danny

conimus wrote:
Hi,
I have since a couple of weeks a new iMac.
When I want to connect my iPhone with the USB cable to my keyboard, I get the message that there is no bluetooth keyboard and the keyboard shuts down.
But I don't have a bluetooth keyboard...
This problem started when I received a new iPhone 3G because my 'old' iPhone 3G was broken.
Can anyone help me with this?
Best regards,
Danny
I don't know if this will help or not (maybe you've already tried) but try installing the key board firmware update:
http://www.apple.com/support/downloads/aluminumkeyboardfirmwareupdate10.html

IPhone no longer works with Pioneer AVIC-D3 car stereo after recent update

I've used my first gen iPhone with the iPod adapter/cable from my Pioneer AVIC-D3 since I first got it - and it's worked great. But after the recent update it doesn't work. I only get an "Error-11" message on the stereo screen when I plug the phone in. Anyone? This is really frustrating!
Thanks.

Nevermind. Did a hard reset of each and they work now. Odd...

HT1386 Problem connecting Iphone 5 to Macbook Pro

My usb-doc has been broken in my macbook pro since a year now. Recently, i bough the iPhone 5. To connect my iPhone with my macbook pro trough Wifi, i need to connect it first with the USB-cable. But this is not possible now. Is there any solution? thx (sorry for the bad english)

Well, They are. All the rest of the ports (sd, firewire800, ...) are working. I've tried 'rebooting' them, but there was water involved... Do you really need to connect With USB in the beginning?

Problem connecting iphone to pioneer DEH-7950UB car stereo

Similar Messages

Maybe you are looking for