Problem connecting ipod photo 30gb to sony dsc w1

hi, i'm having trouble using my ipod camera connector, the camera and ipod can't connect to each other,(no detection),
I tried to update the ipod, that has the 1.0 version to the 1.2, it works fine on the computer but the ipod still remains at 1.0.
thanks for any advice

http://www.apple.com/ipod/compatibility/cameraconnector.html
See if your camera is on this list.

Similar Messages

I purchased Lightroom 5, loaded it on my Mac, and updated to version 5.6. I then tried importing photos from my Sony DSC-RX100iii. Unfortunately it only imports JPEG files but no RAW files. What is the problem and how do I fix it?

I purchased Lightroom 5, loaded it on my Mac, and updated to version 5.6. I then tried importing photos from my Sony DSC-RX100iii. Unfortunately it only imports JPEG files but no RAW files. What is the problem and how do I fix it?

Than LR should have brought in the RAW files as well. ACR is the RAW
processing engine used by LR under the covers so anything not supported by
ACR would not be supported by Lightroom.
Are you shooting RAW plus JPEG? By default, Lightroom will stack then
unless you tell it not to. Check to see if there is a small badge on the
preview that looks like two sheets of paper with a number. That is how
Lightroom indicates a stack. You can unstack them by clicking on the badge.
There is also a menu item to stack/unstack photos. Otherwise, I would have
to research but not sure why Lightroom would ignore the RAW photos but
still import the JPEGS.

Impossible problem with iPod Photo

Ok, so here's the kick:
I joined this forum because I cannot find a solution to this problem whatsoever. I have an iPod Photo that has been sitting in a drawer for about 2 years. I just got a new car stereo and I wanted to fix my old iPod instead of buying a new one. Besides, all I want is the music playback. The original problem with the iPod was the hard drive. It made the usual "clicking" noise everyone has heard at least once, so my first goal was to change the hard drive. I ordered a 30GB Toshiba Drive that fits exactly for my iPod. Actually, it upgraded it's old 20GB one without occupying any additional space. While I was at it, I also ordered a new battery, since I was pretty sure 2 years ago the battery already had problems, and it couldn't have gone better with the years.
So, first package arrives: Hard Drive.
I replaced the hard drive and connected the iPod to my computer. Yay! No more noises! But, for some reason, the iPod cannot connect to my computer. Here's what happens:
I connect the iPod
iPod turns on
Apple Logo appears
Exclamation Folder or Sad iPod icon appears (normal, since I just changed the hard drive and there are no iPod Software files)
After a few mins, the "Do not disconnect" message appears, and my computer starts to connect with the iPod
Not even 30 seconds later, the iPod completly restarts. The screens flashes off like it ran out of battery.
So, I though, maybe it was the battery. So, 2nd package arrives: Battery.
I changed the battery and I'm still having the same problem. Here are some steps I've taken:
1. Put iPod in Disk Mode and connect: Computer doesn't recognizes it, iPod restarts after 45 secs approx
2. Charge iPod: iPod wont charge in any outlet. It will just try to start and, since it will fail due to the lack of software, it will just turn off. I tried putting the iPod in Disk Mode and then charging it, and it did work. I left it charging for about 30 mins and retried connecting it, and I had the same problem/results
3. Put old Hard Drive back: just for the heck of it
I sincerely have NO IDEA of what to do, and I haven't been able to find any help on Google nor any other forum.
Does someone, ANYONE, has a suggestion?
Thanks in advance!

I, too, have this exact same problem after trying to use my daughter's IPod Photo 30GB that she abandoned about 2yrs ago. I've replaced the battery but this does not make any difference. I managed to get it into Disk Mode but when I try to restore it on the pc, it cannot see it. I also tried someone's suggestion of using a Mac but it made no difference.
Someone also suggested rebooting the hard drive using the reset button inside. However, have opened the IPod up and can't see a reset button anywhere on the hard drive. Have seen photos of hard drives in other IPods and it is really easy to find!
All I want to do is restore the IPod, there must be someone out there who can help. PLEASE?!!!!!!!!!!!!!

Problem while using camera connetor and Sony DSC-M1

Dear all
My digital Camera Sony DSC-M1 is able to take pictures and take video into mpeg4 format .
this is the revirew of this camera
http://www.steves-digicams.com/2004_reviews/m1.html
However, I got a problem while using this camera with iPod +Camera connector.
When I plug this camera into camera connector , ipod will transfer all photo from the camera , but do nothing with the video.
I guess that problem is the video file is not inside the "/DCIM" folder
All video file ( *.mp4 ) are all in the folder named " /MP_ROOT/101MNV01/ "
Can anyone help me how to make this sync from camera to ipod automatically both photo and video ?
This problem also bother me while I am using iPhoto to transfer the file when I was home .
pls , help me , thanks a lot

Hi there, I'm having exactly the same problem. Have you found out how to do it?

PC to Mac transfer photos and Music from ipod photo 30gb

My pc crashed and I got a mac, I don't know how to transfer music and photos to my new mac. I've read, something about senuti with an ipod shuffle. I want to know if its the same process to follow?
Any help will be great

1). Connect your iPod to your new computer. If it is set to sync automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod.
2). When your iPod appears in the iTunes source list change the update setting to manual, that will let you continue to use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
3). Once you are connected and your iPod is safely in manual mode there are a few things you can do to restore your iTunes from the iPod. iTunes will only let you copy your purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
For everything else (including purchases) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. I use Senuti but have a look at the web pages and documentation for the others too. You can read reviews and comparisons of some of them here (you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well):
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
A selection of iPod to iTunes utilities:
Senuti Mac Only (iPod Touch & iPhone compatible)
PodView Mac Only
PodWorks Mac Only
TuneAid Mac only (iPhone and iPod Touch compatible)
YamiPod Mac & Windows
iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
iPodRip Mac & Windows (iPhone and iPod Touch compatible)
iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
iGadget Mac & Windows (iPhone and iPod Touch compatible)
Floola Mac & Windows
Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
If you have full resolution copies of the photos on the iPod have a look here: Apple Knowledge Base article - Use Disk Mode to copy photos from iPod
If not, there are a few programs out there for recovering photos from an iPod, have a look at the ones below. If you search the internet you can find more. Just be aware that what you'll be recovering will be photos optimised for the iPod so they won't be the same quality as the original full resolution versions:
Keith's iPod Photo Reader Mac only
iPod Photo Liberator Mac & Windows
TouchCopy Mac and Windows Versions (iPhone and iPod Touch compatible)
4). Keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.
5). I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay: Back up your iTunes library by copying to an external hard drive

Problems Connecting iPod Touch 32GB to WiFi

Hi,
I have just purchased an iPod Touch 32GB and am having problems connecting to a server. I am using a Netgear DG834 router to connect to Orange. Netgear is now showing as checked on the Wi-Fi Networks page on the iPod with strong signal strength but I keep cannoy getting the message "could not connect to server" whenever I try any of the applications. Needless to say, the internet connections on my laptop and desktop are working perfectly. Thanks. Grant

Have you tried resetting your router? sometimes this is all you need to do to get the IPT to work properly. If you are using any type of security such as WEP or WPA2 then you are going to need to enter your password. Try a reset and then go to your wifi settings in the IPT and select your router and then click on the little blue arrow and check under DHCP and make sure you have an IP along with a router Ip and DNS entries. If you don't have a router IP or DNS entries try and renew the lease.
If you can't get it to work then reset the router again but this time try it without any security and do the same procedure as above. If that still doesn't work then the only other thing I can suggest is to look on Netgears website and see if there is a firmware upgrade for your router and to give that a try.

Problem with iPod Photo

A friend of mine have an iPod Photo, but has recently experienced problems. The problem is that iTunes begin to uppdate songs, that are allready on the iPod. So he ends double up with some songs. Another problem is that the iTunes does`nt reconize the iPod, and during the import it just shuts down. Could anyone please help ?

he needs to make sure that there is not a tick still next to the songs when updating them to ipod

Problems connecting iPod touch to windows vista ad-hoc connection

Hi,
This problem has been troubling me since i got my iPod Touch(2nd Gen)
I do not have a wi-fi router,rather i make a ad-hoc connection on my laptop(vista) and share the internet with this wireless ad-hoc connection. I then turn on the wifi on my ipod, which obidiently detects the ad-hoc connection, and after entering the password(WEP) connects to the network(i even get that signal bar indicator on the ipod). But when i try to open a website,it says "Safari cannot open the webpage as it is not connected to the internet". This is really frustrating. I've searched like a zillion places but not able to find the solution to the problem.
All the setting are automatic(DHCP) which includes my wired internet, my wireless network and my ipod settings.
Plz help guyz.
Thanks,
Aditya

Hi,
I had the same problem, my Ipod Tough 2generation, the newest version.
When I ried to use ad-hoc connection, Ipod tough reciever Ip-adress and the "aliverkon peite"(in finnish, dont know the english one) is 255.255.0.0 but not dsn and default gateway.
sorry my bad english

I have an unknown error (-81) when connecting iPod Photo and Nano

This error keeps coming up when connecting iPods to iTunes and no photos can be downloaded.
I have downloaded the all the latest iTune and iPod updates

Hello penel2907,
This could be due to a hardware issue. You may try using a different USB port on your computer.
Check for hardware issues
Related errors: 1, 3, 10-47, 1002, 1011, 1012, 1014, 1000-1020, 1669.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Cheers,
Allen

IPod photo 30GB can only handle 20G of music

I'm recycling an older iPod for all kinds of good reasons.
It's a 30GB iPod photo.
I restored the unit yesterday and synched.
If I use the standared iTunes settings, the message tells me the iPod has a 27.9GB capacity. There's an overcapacity message. No surprises there.
If I switch to Manually manage music I'm told there's 21.1GB of music and 6.1GB of other - even though I've only stored music on the iPod.
There's also 0.76GB free. I don't appear to be able to add more music.
Is there a way to recover the missing 6 or 7GB without a fresh restore?

Thanks for trying to help.
I've found the ipod control/music folder is the only top level folder storing more than a few dozen kb. That's a good start. Sadly it contains 50 sub folders each containing around 500Mb never much more than 1GB - I know because checked every one of them manually.
I also looked in every folder - all the files are either mp3 or m4a format, so no obvious non-music files.
Interestingly the Music folder has 26.8 GB, which is close to the total of music + other listed in iTunes.

Apple iPod Photo 30gb

Hi Apple. I own an old iPod Photo 32gb and I have a problem. After restoring it in iTunes 10 the plug into wall icon appeared on the iPod's screen. After plugging it into a wall I tried resetting it via MENU Button and the Select button. Now the Charging screen is frozen onto it and I can't turn it off. Any help Apple?

i have the same problem but after trying to update the ipod.
did you find any solution?
i really bead to fix it?
please advice

Big problems with Ipod Photo

My I-pod Photo (20 g) got disconnected when it said "Do not disconnect." Now whenever I plug it into the USB port it doesn't show up under my computer or Itunes.
And I keep getting the sad ipod face, and then it turns into
My battery should be almost all the way charged.. and I'm not sure what to do.
Ipod Photo 20 g Windows XP

My brother had to open the ipod up and it started working. shrugs

Problems connecting iMac and iWire to Sony PlayStation 3

Hi. Simple issue. I cannot for the life of me get my Sony PS3 to connect to my iWire local network at home, which otherwise I've never had any problems with.
When I go through the (simple) setup procedure on the PlayStation, it locates my network, then asks me for my WLAN Key Settings, giving me the options of None, WEP and WPA-PSK/WPA2-PSK. I try entering my iWire password into the system as a WEP key (which I think is right), then it says it's not recognised and prompts me to put in hexadecimal settings (?). I try the same thing on the WPA option, again, it doesn't work. I've also tried putting in my Airport Express password, see if that changes anything, but it doesn't
I couldn't see a topic heading on this subject heading through a search, so forgive me if it's already been answered elsewhere. Anyway, I'm stumped, so if anyone's connected successfully, could they share how they did it and what exactly a WEP key is! [Incidentally, I posted this earlier, but I believe in the wrong section]

Thanks. My Airport Express is providing the wireless network - and on my Playstation, it comes up as Robert's Wireless Network (what I've called my AE network) and I put in what I know is the correct password for that network, but it comes up as unrecognised, even though I'm sure I've put in the correct word. So, if as you say I'm doing the right thing, then maybe I'm entering the information wrong, or need to add something to my standard WEP password?

Problem Ejecting iPod Photo since updating software

Can anyone help with my problem ?
Just updated iTunes to 5.0.0.35. All seemed ok until I needed to update software on iPod (colour screen, 60gb) to 1.2 so I can use the camera connector I bought when I go on holiday.
Now I'm having serious problems. I've had the pod for a few months and it's been great until now.
I've been adding album art to iTunes albums. Now the pod with it's new software connects to itunes much slower and I seem to have lost songs from the pod. "Do Not Disconnect" message is continuously on pods screen. It won't disconnect from tunes and when I try to disconnect from PC using the safely remove hardware tactic, I get a box saying "The Device 'Apple iPod USB Device' cannot be stopped right now. Try stopping the device again later."
I've tried everything, from safely removing it to right clicking to eject. The iPod is still stuck on the DO NOT DISCONNECT screen. The only way was to disconnect it then restart the pod using menu/select buttons together. But when I connect it again to the PC, the same thing has happened. Again, I've tried all sorts, from rebooting the PC to changing some options in iTunes.
This all seems to be since I updated the software this morning (Sept 30). I've also tried resoring the iPod and starting all over again, but a soon as you connect it to the PC, it seems to freeze up with that same message on the screen. iPod Updater software said it "Couldn't Mount iPod connected".
Please put me out of my misery. Boo Hoo............

Cheers for that Mrsuknow,
Unfortunately I don't have an 'automatically disconnect' check box under my ipod tab, or anywhere else in preferences for that matter.
And the pod never finishes updating. It tries for a few minutes, then a message appears saying, Ipod couldn't be updated, file(s) not found. A load of exclamation marks appear next to certain songs in the iPod library. When I try to play any of them on the pod, they show as being there but won't play. They're still there on iTunes.
And I've tried restoring factory settings again on the pod, but updater says it can't mount the iPod again.
Boo.....

Problems connecting ipod to itunes

Hi,
just bought a new ipod touch, and i downloaded the itunes from the website, itunes 7.
but it doesn't seem to want to connect to my ipod,
the message that keeps coming up is:
"this ipod cannot be used because the required software is not installed. Run the itunes installer to remove itunes, then install itunes again"
I have done this several times but i still keep getting the same problem, any ideas?

"She also told me that if that didn't work, that I should get a PCI card with USB 2.0. They have a list of recommended brands (tend to work with iPods?) here, so I ran to a local store and picked up a SIIG brand card (this exact model), and it works great."
So, because of a fault of Apple, YOU had to buy more stuff for your computer to make THEIR product work? Id see about trying to get Apple to foot the bill of that. I would have told the tech support gal, to tell her superiors to stick their Nano where it wont play again. Why is Apple not aknowledging this problem? Ive been loyal to Ipods since the old shuffle hit the shelves. It served me well until this year when it fell outta my pocket and sat through a weekend of ice and snow on our driveway. I have half a mind to return this bugged up mess and ebay me a new (well old) shuffle. This is rediculas! At least I got some songs on it once, its not completely useless...yet... I am NOT buying new USB ports for my computer when every single USB device I have works just darn fine in the ones I have on my computer now.

Problem connecting ipod photo 30gb to sony dsc w1

Similar Messages

Maybe you are looking for