Problem connecting only iFolder client

Hi everyone,
I begn with iFolder 3.8 and I've a problem with connecting the client.
For information, I've 3 separate iFolder servers, two of them work perfectly !
So, on one, I can't connect the Windows Client, I've an error "iFolder can't connect, please check the informations" (translation from french).
If I try to connect on the web access, it's OK, no problem with that.
The Simias.log file says that the connexion is successful with the client but it's not...
I try to reinstall the server several times with simias-server-setup, ifolder-admin-setup and ifolder-web-setup but no effects.
If someone as already experienced this and solved this problem, thank you for your help.

OK, so I've solved my problem after hours.
I tried to reinstall completly the server and then, it works !
To conclude, if your iFolder server doesn't work at the first time, don't try to debug, format and reinstall.

Similar Messages

Ifolder client encounted an error while connecting to server

Windows 7 64 bit client give me an error when i try to connect to my i folder system. An error was encountered while connecting to ifolder server. please verify the information entered and try again if the problem persists, please contact your network administrator.
The server is a suse server that I have setup with LDAP authencation
This server works on the web interface and on my linux client but as soon as i try to connect a windows client to it i am unable to connect.
I have tried this with fresh install of ifolder 3.7 server & ifolder 3.8 server
I have tried this with ifolder client 3.8.0 & 3.8.0.3
I have tried both the fqdn and the ip to connect to the server
I have tried both ssl and nonssl in my settings.
I have tried running as administrator
I have tried reinstalling the client several times
I have rebooted the server.
I enabled debug mode on the server interface and i see no connection errors in there.
The questions i have is where is the log file for the windows client?
Is there an easy fix for this issue?
Why does my web interface and linux client work and not my windows 7 one?
Is there any other information you will need to help me fix this issue?
Thanks,
Rhardy

On Wed, 15 Dec 2010 17:36:02 GMT
skinnyquiver <[email protected]> wrote:
>
> Windows 7 64 bit client give me an error when i try to connect to my i
> folder system. An error was encountered while connecting to ifolder
> server. please verify the information entered and try again if the
> problem persists, please contact your network administrator.
>
> The server is a suse server that I have setup with LDAP authencation
> This server works on the web interface and on my linux client but as
> soon as i try to connect a windows client to it i am unable to
> connect.
>
> I have tried this with fresh install of ifolder 3.7 server & ifolder
> 3.8 server
> I have tried this with ifolder client 3.8.0 & 3.8.0.3
> I have tried both the fqdn and the ip to connect to the server
> I have tried both ssl and nonssl in my settings.
> I have tried running as administrator
> I have tried reinstalling the client several times
> I have rebooted the server.
> I enabled debug mode on the server interface and i see no connection
> errors in there.
>
> The questions i have is where is the log file for the windows client?
> Is there an easy fix for this issue?
> Why does my web interface and linux client work and not my windows 7
> one?
> Is there any other information you will need to help me fix this
> issue?
>
> Thanks,
>
> Rhardy
>
>
Hi
When connecting via the windows client, did you get a certificate
request? Is the LDAP(S) port open on the server?
Cheers Malcolm (Linux Counter #276890)
SUSE Linux Enterprise Desktop 11 (x86_64) Kernel 2.6.32.24-0.2-default
up 2 days 18:56, 2 users, load average: 0.31, 0.15, 0.10
GPU GeForce 8600 GTS Silent - Driver Version: 260.19.29

X61 - Vista Business - Client Security Solution Error - There was a problem connecting to the TPM

During startup my x61 has been displaying the following message, 'Client Security Solution' - "There was a problem connecting to the TPM (security device) ont his computer. It is possile that anti-virus or firewall software is blocking the connection. A missing or disabled device driver could also cause this problem. Please refer to the online documentation for more information".
I have spent an extraordinary amount of time and effort to find identify the cause and a solution for this problem. It occurs whether or not virus software is enabled or disabled and numerous calls to Lenovo, Symantec, Kaspersky, and Microsoft have resulted in finger pointing and no answers. None of the vendors acknowledge the problem yet this same issue is a significant topic of concern as found in various blogs and 'help' sites. Lenovo thought it was hardware and changed the motherboard. Lenovo told me to call Microsoft since it was a Vista issue. Microsoft told me to call Lenovo since Vista Business was preinstalled on the machine. Lenovo told me to call Microsoft and so it goes. I removed Symantec's anti-virus and replaced it with Kaspersky.
The strangest thing is that the module works intermitently and it seems that everytime a Lenovo update is performed (via Thinkvantage) the problem reoccurs for sometime.
Does anyone out there have an understanding of the cause and a potential solution???

I have the same problem on an X 60 platform, which only surfaced in the last two weeks subsequent to running all of the Lenovo updates. Prior to this, I had reinstalled all programs, starting with the Recovery Disks for the Think Pad. Everything, including start up, was exceptionally fast. Once I ran the most recent BIOS updates, along with several others, this error message surfaced. It is intermittent, however, and I have not noted an issue.
In reviewing several other Message Boards, I have seen this issue raised several times. Here is a link to a thread where the individual did achieve a solution through Lenovo, but their response is nonspecific as to what they did: (http://forums.lenovo.com/lnv/board/message?board.id=T400_series_ThinkPads&message.id=7143&query.id=1...

Problem connecting (read only) to Sybase Server using Crystal XI

Hi,
I'm having a very similar problem to Renuha in the thread 'Problem connecting to Sybase Server using Crystal XI-Version-11.0.0.1994'
The thread is marked as assumed answered but I suspect not!
I am experiencing this issue in Crystal XI R1 11.0.0.2495, post SP4 install.
Though the issue was exactly the same pre SP4 install, when it was a vanilla install @ version 11.0.0.1282.
I am trying to connect to a Sybase database via Crystal > Start Page > Standard Report Wizard > Standard Report Creation Wizard > Sybase Server > Make New Connection
I enter the details, of my read only user account, and select my desired database, from the (successfully) populated 'Database' drop down.
After some time, in the 'Standard Report Creation Wizard' window I get the server listed under the Sybase Server branch, but, on expanding the server I only get '...no items found...'. However ,if I use the sa account, after selecting a particular database, I can see all the available database objects under the Sybase Server > [server] node.
I am on Windows XP Pro SP3, with Sybase Open Client v12.5.2
I assume my Sybase Open client is correctly installed as I am able to successfully connect using the sa account.
I am trying to connect to a Solaris 10 (5.10) system running Sybase @@version= Adaptive Server Enterprise/15.0.3/EBF 16548 ESD#1/P/Sun_svr4/OS 5.8/ase1503/268
Our database vendor/supplier has said:
"...Crystal reports is not handling the granularity of the Sybase revoke permissions and assuming we've revoked all access to any table where we have revoked only write access.
Is anyone able to assist?
Thanks,
Matt

Don,
Thanks again for the response and my apologies for the delay in reply - they keep giving me other work to do!!
Anyway.
CR XI R2 SP6 successfully installed.
Same outcome on Sybase connect, with a full read/write sa account
i.e. successfull connect and sight of all database objects within my chosen database.
Same outcome on my restricted read only account
i.e. I am able to successfully authenticate and choose which database I wish to select but subsequently, still, 'no items found' is displayed when I expand my database node.
I believe it is a problem with the read only account as both accounts are able to connect, as shown by the availablilty of the dropdown, listing the available databases within the specified Sybase instance.
The reasons for going down this path are as you suspect - I've been asked to provide access which is not full!
As far as the testing via test tbl creation.
I know very little of Sybase (?!) and all our Sybase DBA activities are carried out by our system/dB vendor/supplier.
To do further testing I would have to go back to our dB vendor/supplier but, as mentioned, (I get the impression) they already beleive they have carried out all required of them by providing locked down read only access.
I ought to mention that the database trying to be accessed is a restored copy of "the previous days" live data, on an MIS server. The read-only account comes over as with full privileges, and it is a script, subsequent to database restore, which knocks down the accounts privs, to read-only. Given this scenario what would I have to ask of them re further testing/troubleshooting?
Thanks,
Matt

Problem connecting iChat client 10.6 (Snow Leopard) to iChat server (Lion)

Hi guys,
I'm fairly new to the Lion server, but it's all working fine with my Lion client(s) so far
However, my wife's best friend's MacBook is still running Snow Leopard ( and she is not willing to upgrade her MacBook as of now due to severak reasons) and I'm trying to connect her iChat client from Snow Leopard to the iChat server running on my Lion server.
If I try to set up the account manually in the iChat client, I can't find an option for Mac OS X Lion server and trying a work around with the Jabber account settings didn't work either (on the server's log: credentials failed). Then, I tried to create a profile on the server and downloaded it to the Snow Leopard system, but it wasn't recognised (in System Settings, there is no Profile option ).
So, can someone please, please, please give me any idea about it or is it simply not possible to connect a an older iChat client (5.0.3, Snow Leopard) to the latest version of the iChat server (Lion) ??
Again, any idea is very appreciated!
Many tx in advance.
Cheers
Kai

Hi there,
A simple suggestion , please make sure both MacBook Pro clock and the server clock are the same meaning the hour/Min/ sec both should match. A least difference of 3 seconds is fine.
I had faced this problem in many place and only solution was to match the time and it will bind immediatly.

My iPad2 no longer connects to my home wifi network but there is no problem connecting to other saved wifi networks. Currently using iOS8.0.2. with storage capacity of 12.2Gb but only 147Mb free. Disconnecting the router and rebooting the iPad worked

My iPad2 no longer connects to my home wifi network but there is no problem connecting to other saved wifi networks. Currently using iOS8.0.2. with storage capacity of 12.2Gb but only 147Mb free. Disconnecting the router and rebooting the iPad worked briefly as a temporary fix but not anymore

You could try this
Temporarily disable security on your home network
See if the iPad connects
If it does then reset the security - with the same or different password

BO - Problem to connect through windows client

Server OS: Windows Server 2003 SP2
BOE Version: XI Release 2
Client SO: Windows XP Professional SP2
DB: Oracle 10 v 10.2
Problem:
I have a BOE XI Release 2 installed on a server and if I try to connect via WEB everything is perfect but when I try to connect using windows clients (Designer, DESKiu2026)
I am getting the following error:
" No se puede acceder al repositorio. (USR0013)"
u201C[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Error en el transporte: Fallo en la comunicación.(hr=#0x80042a01)u201D
I'm using the standard port which is the 6400.
I hope your comments.
Thanks!

Hi,
Are you using any authentication ?
If you are using LDAP, then try this...
Symptom
Error logging onto Desktop Intelligence or Designer using LDAP authentication:
"(USR0013) [repo_proxy 13] SessionFacade::openSessionLogon with user info has failed (The LDAP authentication could not log you on.) Verify your logon information. If your account is under a different domain as o=u2026, please enter your dn (hr=#0x80042a01)."
Reproducing the Issue
Configure LDAP authentication
Error appears from a client computer running Desktop Intelligence or Designer
Logon to Desktop Intelligence or Designer on the server works
Cause
LDAP authentication from the client connects directly to the LDAP directory without passing the CMS
The server has been configured on the firewall, but not the client computer
Resolution
Configure the firewall for the client machines to pass, so that they can reach the LDAP directory

When I try to submit a form I get an error massage (An error occurred during the submit process. There was a problem connecting to the server.) it seems I only get this message on a PC

When I try to submit a form I get an error massage (An error occurred during the submit process. There was a problem connecting to the server.) it seems I only get this message on a PC

Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software

Problems connecting Client 9i from vb6

Hi, ive got an app, which connects to Oracle Client 9i from vb6 using ADO, the problem is that in some client machines i can connect with OraOleDB.Oracle.1 Provider (including mine) but in the others just got a sucessfull connection with MSDAORA provider and i dont know why..
Can anyone help me in order to use just one provider, thanks

Hello,
You must set DNS client on windows (or host name in hosts file)
regards

HT2284 Recurring "connection failed" when selecting TimeCapsule in the sidebar (internet connection works fine). Clicking "Connect As" starts the cyle over again but ends in "There was a problem connection to the server" message. Only fix is resetting T

Recurring "connection failed" when selecting TimeCapsule in the sidebar (internet connection works fine). Clicking "Connect As" starts the cyle over again but ends in "There was a problem connection to the server" message. Only fix is resetting TC.
The TC is the wifi base station, also have AirportExpress on the network, both of which work fine. The TC has an external disc connected as well, which is also visible in the sidebar but also cannot be connected to. Several MB computers use the network, all of which either can or cannot connect to the TC disc depending on when it is acting up.
Any ideas other than clicking "connect as" or powering down the network every time?

Read up how to install 5.6 utility into ML.. it is pretty easy.
I downloaded 5.6
http://support.apple.com/kb/DL1482
Download unpkg
http://www.timdoug.com/unpkg/
Open the dmg to get the pkg.. drag it onto unpkg.. and it will create a directory under desktop with all the files.. drag the application to the utility directory.. or just run it direct.
Google if you want more explicit instructions.
Much easier with a real tool instead of a toy.
Hold the option key when you select firmware update.. all the old ones will appear.
But this will not work on newer Gen4.. only on every other model and early Gen4. .I do not know when they turned the corner and started this only 7.6 nonsense.

My iphone5(ios 8.1) is not connecting to my home wifi network but connects to office wifi. This problem is only after updating 8.1

My iphone5(ios 8.1) is not connecting to my home wifi network but connects to office wifi. This problem is only after updating 8.1I have already done "Reset Network many times. I have switched off and on my router multiple times. No luck.

Hi vpraghu,
If you are having an issue with connecting to a Wi-Fi network with your iPhone, I would suggest that you troubleshoot using the steps in this article -
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

HI i have macbook pro with OSX 10.8. I am facing typical problem with Wi- Fi , in school wi-fi it does'nt connects to http sites and connects only https but in home wi-fi it connects to all all http and https sites. How fix this problem as I am new this

HI i have macbook pro with OSX 10.8. I am facing typical problem with Wi- Fi , in school wi-fi it does'nt connects to http sites and connects only https as no security/proxy settings done but in home wi-fi it connects to all http and https sites. How to fix this problem as I am new this operating system. Please any one help me in this as I have installed Delicious Library which is not working in school becoz it searches amzon http site.

I would imagine that at school, you're required to connect through an HTTP proxy.
From the menu bar, select
 ▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. Enter the proxy settings given to you by the network administrator. Click OK and then Apply.
You may wish to create separate network locations for home and school. See the built-in help for instructions.

Problems connecting client to shared folders (smb)

Hi, I have problems connecting Mac shared folders through VPN (PPTP)
I can access the folders in few hours but then I get error message "There was a problem connecting to the server"
The clients have Lion Version 10.8.2
The server i connect to is a 2008 R2 Server
Ping, Trace Route, Remote Desktop works
I have other Windows client connected 24/7 without any problem It's just Mac clients that are the problem with.
I do not know what else to do, any suggestions are welcome
Regards
Mathias

check the service of "OracleOraDb10g_home1TNSListener rather starts manually or automatically ?

SSLServerSocket that only accepts client connections from localhost

My end goal is to create an SSLServerSocket that will only accept client connections requested by localhost.
I've tried creating a new SocketPermission:
p1 = new SocketPermission("localhost:1024-65535", "listen,connect,accept")I am able to add it to a custom Policy's PermissionCollection, but it doesn't seem to work. I believe SecurityManager.checkAccept() only checks the host's name and not the client's...
This following code works and illustrates what I'm trying to achieve, but I'd like it to happen before the socket is actually accepted:
SSLSocket socket = (SSLSocket)m_sslServerSocket.accept();
Strintg clientIP = socket.getSession().getPeerHost();
if( !clientIP.equals( "127.0.0.1" ) & !clientIP.equals( InetAddress.getLocalHost().getHostAddress() )
// reject connection
}Any help is appreciated.
Edited by: misterE on Oct 24, 2007 10:46 PM

I'm not clear whether you are doing this Permission thing on the server side or the client side, and/or whether you have a SecurityManager installed.
If the server only has SocketPermission("localhost:...", "listen,connect,accept") it should only accept connections from localhost, not from B. So I don't know why the first scenario worked.
If the server only has this SocketPermission with some other hostname, it shouldn't be able to listen at any port. So I don't know why the first scenario worked.
Unless there is no security manager installed.
You can run it with -Djava.security.debug=access,failure to see what permission checks are being executed.
BTW because connections are accepted by the TCP stack before permission checking takes place, as described above, the client won't get a ConnectionException if the permission is refused at the server: it will get most probably a SocketConnection: connection reset by peer when writing to the server.

[Jeveloper + EJB client - EJB on OAS] Problem connecting

I having problems getting a simple client from within JDeveloper 3.0(Code snippet - OAS/EJB Client) talking to a simple EJB on OAS 4.0.8.
I have deployed OK (red flag against status?) but when I run the client using port - 5512(ORB port)I get the message below
Anybody any ideas?
Creating an initial context
Looking for the EJB published as 'MyOASApp/MyEJB'
Naming exception occurred!
Cause: This may be an unknown URL, or some classes required by the EJB are missing from your classpath, or your OAS host is short of resources
Suggestion: Check the components of the URL, and make sure your project includes a library containing the EJB .jar files generated by the deployment utility.
[Root exception is java.net.UnknownServiceException: no content-type]javax.naming.NamingException: Failure to access http://hfxcap4:5512/ows-bin/rmproxy.ior; listener inaccessible or configured wrongly
at oracle.oas.jndi.oas.SiteResolver.getIOR(Compiled Code)
at oracle.oas.jndi.oas.SiteResolver.resolveListenerURL(Compiled Code)
at oracle.oas.jndi.oas.SiteResolver.resolveSiteContact(Compiled Code)
at oracle.oas.jndi.oas.SiteResolver.resolveSiteContact(Compiled Code)
at oracle.oas.jndi.oas.SiteResolver.resolveSiteObject(Compiled Code)
at oracle.oas.jndi.oas.BeanInitialContext.resolve(Compiled Code)
at oracle.oas.jndi.oas.BeanContext.lookup(Compiled Code)
at oracle.oas.jndi.oas.BeanInitialContext.lookup(Compiled Code)
at oracle.oas.jndi.oas.WrapperContext.lookup(Compiled Code)
at oracle.oas.jndi.oas.BeanContext.lookup(Compiled Code)
at javax.naming.InitialContext.lookup(Compiled Code)
at package1.MyOASAppClient.main(Compiled Code)
**************

HI, I have the same problem that you had, maybe did you manage through ?? Thanks for all the help you could bring me.
Nico
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by pFrooney:
Back Again ...
I have tried all ao the above
now using this code below but it fails on the lookup with the error message below:
..created library with client stub, using 1.1.8, moved OASRuntime to top of included libraries
Any suggestions
String oasUrl = "oas://hfxcap4:80";
String oasEJB = "MyOASApp/MyEJB" ;
// Setup the environment
Hashtable environment = new Hashtable();
// Turn JNDI on to OAS
environment.put(javax.naming.Context.INITIAL_CONTEXT_FACTORY, "oracle.oas.naming.jndi.RemoteInitCtxFactory");
// Lookup the URL
conv_package.MyEJBHome homeInterface = null;
try {
System.out.println("Creating an initial context");
// Get initial JNDI context
Context site = (Context) ((new InitialContext(environment)).lookup(oasUrl));
org.omg.CORBA.COMM_FAILURE:
at oracle.oas.orb.CORBA.Request._invoke(Compiled Code)
at oracle.oas.orb.CORBA.Delegate._invoke(Compiled Code)
at org.omg.CORBA.portable.ObjectImpl._invoke(Compiled Code)
at oracle.oas.orb.CORBA.Delegate.is_a(Compiled Code)
at org.omg.CORBA.portable.ObjectImpl._is_a(Compiled Code)
at oracle.oas.jndi.oas.BeanInitialContext.resolve(Compiled Code)
at oracle.oas.jndi.oas.BeanContext.lookup(Compiled Code)
at oracle.oas.jndi.oas.BeanInitialContext.lookup(Compiled Code)
at oracle.oas.jndi.oas.WrapperContext.lookup(Compiled Code)
at oracle.oas.jndi.oas.BeanContext.lookup(Compiled Code)
at javax.naming.InitialContext.lookup(Compiled Code)
at CClient_package.MyOASAppClient.main(Compiled Code)<HR></BLOCKQUOTE>
null

Problem connecting only iFolder client

Similar Messages

Maybe you are looking for