Problem connecting to carrier after upgrading to 5.01

After upgrading my iPhone 4 to iOS 5.01 I have problems connecting to my carrier.  It may take several hours before the connection is made.  I normally never turn off my phone except when traveling on airplanes and that is exactly when the problem occurs.  After landing I turn on my phone, type in my pin code, and then receive immediately receive "No service".  I try toggling Airplane mode and see a search attempt which ends in "No service".  I try resetting the network and rebooting - does not help.  Low and behold an hour maybe two, maybe three  hours later the carrier connection is made.  Stays connected without any problem until the next time I take a plane.
Any ideas,  I have not try contacting my carrier because I do not think they are the problem

IMHO you must be wrong.
Or how do explain the following facts:
1.The same application on the same PC can connect to the database when it's started under JRE 1.4.2.
2.The same application on other PCs in the same network have no problem to connect to the database under JRE 1.5.0_01.

Similar Messages

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

    Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

    The latest flash player release is 11,0,1,152.
    Can you upgrade to this version and see whether the crash stil exists?
    Go to get.adobe.com/flashplayer to download and install flash player.
    In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
    saranlee wrote:
    My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows  which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

  • Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ???

    Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ?????????????????

    1st problem see http://kb.mozillazine.org/Firewalls
    2nd problem, to close Firefox properly use File > Exit
    :not with the [x] in upper right corner which close window
    :see http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit
    :if restarting use "Restartless Restart" extension as mentioned there.
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • No carrier after upgrade

    my iphone 3gs, factory unlocked, bought in Saudia Arabia has no carrier after upgrading from 4.2.1 to 4.3.2
    The baseband is 5.16.02.
    Help, Please!

    Try restoring your phone from backup again. If there was a problem with the update being properly installed, this should hopefully fix things.

  • Why I am facing signal problem in my 4s after upgrade to os 5.0.1

    Why I am facing signal problem in my 4s after upgrade to os 5.0.1 and how can I solve it

    Hi, i also got the same problem. pls let me know if there any luck.
    01738855651
    Tusher
    Thanks Man

  • I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    You have to go to autherized iPhone agent.

  • How to fix connecting to iTunes after upgrading to ios6

    How do I connect to iTunes  after upgrade to ios6

    iTunes on your computer or the iTunes store?
     Cheers, Tom

  • I have a mac with os x 10.6.8, should I upgrade it to os x 10.9.is there any problem which can occur after upgrading my os.

    I have a mac with os x 10.6.8, should I upgrade it to os x 10.9.is there any problem which can occur after upgrading my os.

    It is best to wait till there is a 10.9.1 update as new OS X systems always cause problems to some installations. Better not to risk losing data unless you have a bootable clone that enables you to revert to the original (pre upgrade) state. Haste makes waste.
    Check this thread if you wish to see what I am talking about.
    https://discussions.apple.com/community/mac_os/os_x_mavericks

  • TS3276 Has any one had problems finding RSS feeds after upgrading to 10.8?

    Has any one had problems finding RSS feeds after upgrading to 10.8?

    RSS feeds no longer appear in Mail in Mountain Lion (nor in Safari). You'll need a separate RSS application.
    BTW, this forum is for Mac OS X 10.7 Lion. The forum for OS X 10.8 Mountain Lion is this one:
    https://discussions.apple.com/community/mac_os/os_x_mountain_lion
    Regards.

  • Problems with IMAQ Vision after upgrading from Labview 6i to Labview 6.1

    Hi,
    We just upgraded from Labview 6i to 6.1.To do this,we uninstalled the 6i version as was suggested by NI and then installed the 6.1 version.Later when we tried to run the old vi's written using Imaq vision, we ran into different problems.Has anyone experienced any similar problems with IMaq vision after upgrading?If so please help me solve this issue.
    Thanx
    deepak

    What kind of problems?
    I would strongly suggest that you uninstall IMAQ (all elements) and reinstall them. They register with Windows, probably docked to 6i, and also must be recompiled, which I believe is done in installation.
    This is your best bet.
    If you still have problems, contact NI and ni.com/ask and start a support inquiry.

  • Reception problems with iPhone 3GS after upgrading to iOS 4.2.1

    AFter upgrading to 4.2.1, my 3GS iPhone is experiencing bad signal, bad quality and frequent disconnections.
    This was repeated even after my provider replaced my device to a different 3GS device, running 4.2.1.
    inserting my SIM card to a NOKIA phone, showed strong signal and good reception.
    Did anyone experience reception problems on 3GS running 4.2.1??
    Thanks,

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • Problem with no nat after upgrade version

    Hello Guys...
    Im having problems with nat after upgrade....
    source = 10.11.7.14
    destination = 10.0.32.10
    the next hop for 10.0.32/24 is 10.0.5.1, by inside interface. My firewall Pings this 10.0.5.1. When I change the router to doesnt pass by firewall, the connection works from source to destination, works!
    In log, im receiving this message:
    6
    Nov 23 2012
    15:24:54
    302303
    spbwts02_0303
    55517
    10.0.32.10
    80
    Built TCP state-bypass connection 249015 from dmz:spbwts02_0303/55517 (spbwts02_0303/55517) to inside:10.0.32.10/80 (10.0.32.10 /80)
    6
    Nov 23 2012
    15:27:29
    302304
    spbwts02_0303
    51123
    10.0.32.10
    80
    Teardown TCP state-bypass connection 242785 from dmz:spbwts02_0303/51123 to inside:10.0.32.10/80 duration 1:00:10 bytes 0 Connection timeout
    In 8.2 I had this NAT:
    DMZ interface:
    Exempt     10.0.32.0/24     10.11.7.0/24     (outbound)
    I have a bypass for those networks and services. I guess I dont need bypass because the packet comes from dmz and goes to inside, right? Anyway, I removed bypass and nothing happen!
    And now, in 8.4(5) I have:
    DMZ     Inside     obj-10.11.7.0/24     obj-10.0.32.0/24     any      original     original    
    What can be my problem?

    route, look:
    Before:
    route inside 10.0.32.0 255.255.255.0 10.11.5.1 1
    Now and working:
    route inside 10.0.32.0 255.255.255.0 10.11.2.3 1
    I dont have an interface in the 10.11.5.0 network. I guess when someone configured the route, put this 10.11.5.1 as gateway, but I dont know how it was working.
    Now, I changed to 10.11.2.3 and OK. My firewall has an interface in 10.11.2.0 newtork.
    But the bypass is a mistery to me yet!

  • Can't Connect to Server after Upgrading to Lion

    I upgraded to 10.7 from 10.6.8. I've ran all the updates etc, but now I cannot connect to my OS X Server (10.6.8) or any other machine for that matter. The server appears in my finder window and will allow me to connect as a guest but if I try to login by clicking connect as or by using COMMAND+K and typing the IP I get a long wait after entering my PW only to receive an error that says "There was a problem connecting to the server "pggfx01". Check the server name or IP address, and then try again. If you continue to have problems, contact your system administrator. It should be noted that I have other machines that came with Lion that connect without issue and other machines still running 10.6.8 that connect flawlessly. PLEASE HELP, I've searched and searched with no succes.

    I've tried that over and over again ( I had found that solution previously ) but it doesn't work. As a note I can connect as a guest to anything, just not a registered user. So when I get to the step that wants me to create an AFP connection it doesn't work. I type in my username & password and the little wheel spins like it's trying to connect and the error I mentioned above pops up after a really long time. Very frustrated with this upgrade, it has killed my productivity.

  • Problem to see content after Upgrading

    i have  apple tv 2G
    after upgrading to latest version Several times with directly to computer with i Tunes
    Version 5.0 (4099)
    i can't see all the content
    no iTunes movies and TV shows
    i see only the home sharing and setting
    please help
    thank you

    Welcome to the Apple community.
    Check that you are properly connected to the network, and that the location of the iTunes Store is set correctly.
    Some users have found that restarting the Apple TV or restarting their router will resolve this problem, others have not. Some users have found that the missing features return to the Apple TV by themselves a day or so after.

Maybe you are looking for