Problem connecting to ISP through AE Modem

So far, I been able to set up a wireless network in my home using an AirPort Extreme Base Station, but I'm unable to connect to an ISP via a dial-up connection through Airport's built-in modem.
Airport on my MacBook is on and attempts to connect, but, after several attempts, it notes that my password and/or username are invalid--despite reentering them several times in Airport Utility. I am using a MacBook, Airport Extreme, and AT&T Worldnet® as my ISP. I am connected to the internet now through Worldnet and my Indigo iMac. I've double checked my configurations--why can't I connect?
Thanks in advance.
Andrew L.

Crawling under a rock... I incorrectly typed my password--caps lock mistake, oops.
Andrew L.

Similar Messages

  • Problems connecting to internet through airport extreme

    Hi everyone I am tyring to connect to the internet. I have Charter Digital at the highest speed. When I connect directly through the cable modem using DHCP i can connect to the internet just fine, but when I use the Airport using assing multiple IP addresses i cannot get the internet. When I run diagonostics, Everything works fine up to ISP after that (internet, Server) cannot connect. I've read through the boards and found nothing, so I could really use some help. I have the CAT 5 cable from the modem going to the WAN plug in the Airport.
    Thanks for any help you can give

    Thank you - some of the materials linked to that may have helped isolate my problem. Unfortunately, nothing's solved it yet. Pinging the Apple IP address gives me: No route to Host, with 100% packet loss on all attempts. I'm using an Airport Express card in a 1GHz G4 eMac running OSX 10.3.9, trying to connect to a Linksys BEFCMUH4 wireless broadband gateway modem/router. As stated above, all 4 ethernet ports are functioning correctly. All initial diagnostics on my end show there's a connection. Further diagnostics and attempts to get online show a lack of a connection but don't give any detail as to where it's encountering difficulty (or, if a traceroute shows something I'm not qualified to decipher it). It's even told me it's unable to configure succesfully. I've made sure the router itself is configured so there is no password necessary (it checks for an automatically logged number from my computer) and it shouldn't be locking me out from there (I hope). I was told running Airport Express with a non-Airport wireless router would be fine, but is it possible I was misinformed? The setup procedures available to help facilitate this all assume there's an Apple AirPort to search for and don't turn up my current router when they scan, leaving me with nothing to select from in that stage of the setup, and thus I cannot proceed. Am I doomed? Are there any gracious, exceedingly capable souls out there with the time and expertise to assist me? I'll be very grateful if someone can get me past this hurdle (I need to go wireless so I can get my air conditioner installed).

  • Mountain lion problems connecting to tv through receiver

    Things start out fine - I power up the Mac Mini, it sees my Vizio TV through my Pioneer VSX 1022-K receiver no problem (HDMI all the way through).
    I turn off the tv for a while, and come back and turn the TV back on.
    I see one of four things:
    Sometimes, it still works fine (but not very often).
    "No signal" on the TV.  Power off and on the TV and receiver in every combiniation ever, still no luck.
    Blue screen, this is rare, but sometimes it's just a blue screen.  I can't do anything though with a mouse or keyboard.
    White noise.  Again, I can't do a thing.  This is also rare.
    When 2-4 happens, I also lose the ability to VNC into the mac mini using Real VNC from Windows (it just stays at "connecting...").  In Mountain Lion, without this problem, I VNC right in in less than a second (after entering the PW, of course). 
    Sleep is disabled, screensaver is disabled. As I said, it's random; sometimes it's fine, other times it's broken.
    The ONLY fix when this happens is to hard power off and turn it back on.  Obviously not what I am wanting to do with my brand new mac mini.  I am about to throw this thing against a wall, or maybe return it, lol.
    With Lion, this did not happen (although I had plenty of other problems).
    I do not think it has to do with sleeping, because sleeping is disabled...  So what else could be the issue?   I've heard EDID issues, but I have no clue where to begin to fix that. 
    APPLE - PLEASE FIX YOUR BUG AND HELP.
    More people with this problem here: http://forums.plexapp.com/index.php/topic/44944-2011-mac-mini-on-mountain-lion-f reezing-when-attached-displays-are-power-cycled/
    Thanks.

    If your Vizio has audio return capability via HDMI, you could do it that way...although I'm not sure it would pass anything more than 2-channel stereo from the TV back to the receiver.  It's not a feature that my TV is capable of, so I can't speak to its real-life application.
    If your TV doesn't support ARC, you can buy a TOSlink cable to run digital audio from your mini to your receiver.  Check monoprice for some good deals on those cables.  I got one for less than five bucks. 
    It's a bit of a dance, but you would need to switch your audio output between HDMI (when you want the audio to come out of your TV) and TOSlink (when you want it to go to your receiver).  There are applescripts that can automate this so that you just double-click a link and it performs the switch.  I am running this exact setup in my house for the times when I want to watch a movie but everyone's asleep so I can't run my receiver.

  • E1000 won't connect to internet through cable modem

    I just switched internet providers and now have a cable modem. The internet works when I have it plugged directly into my computer. My wireless card recognizes and connects to my E1000, but the E1000 won't connect to the internet even though the ethernet cable is plugged into the correct ports. The cable provider left because it's obviously a problem with the router itself.
    I've tried all the usual tricks--resetting the modem, resetting the router, resetting the computer, etc. Unfortunately, another problem I discovered in the midst of all this is that I no longer have Cisco Connect installed on my computer, and I have somehow managed to lose the CD for it.
    Anyone have any suggestions?

    Suggestion:
    1. Download the Cisco Connect software from the Cisco website (click HERE)
    2. Connect the router, modem and hardwired the laptop to the router as well
    3. Reset the router
    4. Run the Cisco Connect software

  • Need help connecting to ISP through DSL/router

    Hi
    I need help configuring my intel solaris8 box to get to the internet. I have dsl going into a linksys router. my windows machine have no problem using the DNS servers from pacbell. i also have DNS setup on my novell server, but the solaris8 box still can't resolve anything. I can ping everyone on my segement, I can connect to my novell web server netscape navigator but can't resolve it's name, i have to use it's ip address. I can remote logon. I lloked for a resolv.conf file but can't find one, help!!!!
    Danny

    Edit /etc/resolv.conf (it may not exist) with the following lines:
    domain your.domain.name
    nameserver your.primary.dns.ip
    nameserver your.secondary.dns.ip
    search your.domain.suffix
    The last line is optional, but please do substitute those values for the ones that you use.
    As far as a default route goes, just edit /etc/defaultrouter (may not exist) and put the ip of your default gw on a single line.
    Alex

  • RV042 v4.2.2.08 problem connecting to ISP with WAN Connection Type PPTP

    Hi,
    I have an issue with an RV042V3. It does not connect to my ISP with PPTP connection type and username 'comsulting/[email protected]' , pwd 6 digit alphanumeric.
    Using the RVS4000 or the old RV082V2 with firmware 2.0.2.01-tm, the WAN PPTP connection works fine.
    Unfortunately, the RV042 does not output any logging information about the PPTP dialin attempts to the ISP (if there are any).
    Did anybody face the same issues?
    Thanks,
    Richard

    Hi Jonathan,
    thanks for the reply. I fear there is a misunderstanding.
    I am not having troubles with the PPTP server functions of the RV042 but with the client functions.
    My ISP services use PPTP to dialin to the internet instead of e.g. PPPoE.
    This can be chosen in the WAN connection settings but does not seem to work!
    Regards,
    Richard

  • Problem connecting Curve 8330 through Bluetooth

    The Curve and my Asus running Windows XP Pro "see" each other, the BlackBerry reports a connection, but Windows always informs me that the set-up failed and the desktop manager does not recognize the Curve.
    In the desktop manager, the option for enabling a Bluetooth connection is greyed out and unaccessible.
    Can anybody help me here?
    Thanks

    Thanks urumilton, I found that article in the meantime. Now my question would be: Where can I get the generic Windows driver stack?
    I uninstalled the Toshiba Bluetooth driver stack on my system and restarted, hoping Windows would find the generic driver. Unfortunately it just re-installed the Toshiba driver.
    I also tried uninstalling Toshiba and installing the WIDCOMM stack, but that does not work either.
    I have been reading this string
    http://www.blackberryforums.com/bluetooth-connection/28166-how-use-native-bluetooth-drivers-most-blu...
    but neither of the problems seem to closely resemble mine, since I am not using a dongle but the on board BT of my Asus U6S.
    Any further ideas?
    Thanks!

  • Problem connecting OData Service through SMP APP in Android App

    Hi,
    I'd like to develope an Android sample app with SMP and OData. Therefore I use the SMP Developer Version in the HANA Cloud and the Netweaver Service Gateway Demo System as OData Endpoint. I configured the app in the SMP as described in the openSAP Course "Introduction to Mobile Solution Development".
    I successfully managed to integrate the MAFLogon component from the SMP SDK 3.0. The registration in the app to the SMP works fine. Then I tried to download the service document as described in the SMP SDK 3.0 Help Documentation (http://help.sap.com/saphelp_smp303sdk/helpdata/en/7c/09250170061014bb05d2c9cd16418c/content.htm?frameset=/en/7c/09404b70061014b89ba1222a327094/frameset.htm&current_toc=/en/7c/01cda6700610149b10c2f2a86d335b/plain.htm&node_id=3583&show_children=true#jump3577).
    But when I'm trying to download the service document, I get a 403 response and in the SMP the log says "Application connection id is not provided". So I added the APPCID in Requestheaders. Then the download works and in the onsuccess method of the INetListener I'll get a 200 response. But in the SMP Logs I get a 401 response which says that I should supply the Authorization Headers. So I added them in the next try and I get a 500 response.
    So I don't know what to. Can anybody provide me some advice?
    Thanks in advance
    Philip

    Hi Philip,
    Can you download the app from this tutorial and try, SMP 3 - Android Native App Development
    The tutorial is based on the SMP 3 on premise version not on the SMP HANA cloud, but still it works. Only change you have to do is replacing the code clientConnection.setConnectionProfile(true, "66.175.100.29", "8080", null, null); with clientConnection.setConnectionProfile("https://smpxxxtrial.hanatrial.ondemand.com");
    And it is not using MAFLogon component. You can use it if needed.
    Thanks,
    Midhun VP

  • Connect to ISP thru router - new setup

    Connecting a new E2100L Linksys router to ISP through DSL modem produces no connection, but I am able to connect to ISP when modem is connected to computer.  This is my first router setup and I followed setup dvd.  I'm not clear what issue is.  I have shut everything down and restarted in order: DSL modem, router, computer as suggested in Documentation with same result..  Router display indicates Power; Internet Connection and connection to Computer 3.
    Present internet connection through computer bypassing router.  DSL is usually connected manually through the computer .  Assistance appreciated. 

    Searching the forum found your answer easily.
    go here.  or here.

  • Problem connecting to DSL modem

    Just finished a long session with QWest that ended with me unable to connect to my new DSL modem. Apparently there's a problem with the IP configuration settings because everything works but the computer can't find/recognize/connect with the modem. The address, subnet, router, DNS numbers QWest provided don't work. They said I had to call Apple and verify the IP configuration. But Apple doesn't answer on weekends. Is there a way to resolve this now, or do I have to wait until Monday?

    yumbeerium...
    Got the right cable?
    This is assuming that you are connecting it via - Ethernet port, you may need a Crossover cable if the modem did not come with one.
    By the way... I wonder just how Apple can help you with settings that are to be provided by the ISP? Although I believe most ISPs can use DHCP settings, you may need to ask QWest if manual settings are really necessary.
    http://docs.info.apple.com/article.html?artnum=42717
    ...Ron

  • I have a PC with a internet connection through a modem and ever since i have had it i have had no connection to the itunes store. And even if I try to update anything it says that i need to check my connection, but my connection is fine. What should I do?

    I have a PC with a internet connection through a modem and ever since i have had it i have had no connection to the itunes store. And even if I try to update anything it says that i need to check my connection, but my connection is fine. What should I do?

    This almost always indicates your firewall or anti-virus utilities are preventing iTunes from contacting the iTunes Store. Here is an exerpt from "Can't connect to the iTunes Store": http://support.apple.com/kb/TS1368
    Troubleshooting on Windows
    If you haven't been able to connect to the iTunes Store for more than a day —and other customers on our discussion boards aren't experiencing similar issues— a software or internet service provider (ISP) configuration issue may be blocking your access to the iTunes Store. Click here to find out which ports and servers need to be allowed for iTunes Store access.
    Update iTunes to the latest version.
    If you have not done so already, try the steps in iTunes for Windows: iTunes Store connection troubleshootingto troubleshoot iTunes Store connectivity in Windows.
    Firewall issues:
    Windows XP: If you've upgraded to Windows XP Service Pack 2: By default, Windows Firewall is enabled. As with all firewalls not manufactured by Apple, you will need to configure Windows Firewall to allow iTunes to access the iTunes Store. To do so, see How to enable iTunes in the Windows XP Firewall.
    Windows Vista and 7: As with all firewalls not manufactured by Apple, you will need to configure Windows Firewall to allow iTunes to access the iTunes Store. To do so see, the "Blocked by software firewall" section in this article.
    Proxies can cause issues and should be avoided whenever possible. To disable the proxy built-in to Windows see, iTunes for Windows Can't access the Internet if proxy settings are incorrect.
    If you are receiving a specific error message you may want to see, the "Specific Conditions and Alert Messages" section in this article as needed.
    If the issue still persists, contact your internet service provider and confirm that the ports and servers in this article are enabled over your network.
    The "hosts" file may be blocking the iTunes Store
    Microsoft's article How do I reset the hosts file back to the default? has instructions and a "FixIt" to have Windows try to reset the hosts defaults for you.
    Note: Some workplaces may put internal resources in the hosts file but may also use it to block iTunes Store.
    To create a copy of your hosts file and replace it with an empty hosts file, follow the instructions for your operating system below.

  • I bought iPhone 6 Plus few days ago and I have the following problems: 1) When entering through Safary to Google Images and tap on each on of them they do not enlarged nor I am able by click on them to enter into the connected website

    I bought iPhone 6 Plus few days ago and I have the following problems:
    1) When entering through Safary to Google Images and tap on each one of them they do not enlarge nor I am able by click on them to enter into their connected website
    2) When I receive an e-mail with images I cannot easily save them in my gallery. It needs more than 10 tabs to the window "save this image" or "save all 3 images" and if I am lucky it saves one image. This is very frustrating, I loose a lot of time trying and affects my job.
    I would highly apreciate any help
    Kind Regards

    I bought iPhone 6 Plus few days ago and I have the following problems:
    1) When entering through Safary to Google Images and tap on each one of them they do not enlarge nor I am able by click on them to enter into their connected website
    2) When I receive an e-mail with images I cannot easily save them in my gallery. It needs more than 10 tabs to the window "save this image" or "save all 3 images" and if I am lucky it saves one image. This is very frustrating, I loose a lot of time trying and affects my job.
    I would highly apreciate any help
    Kind Regards

  • Establish a connection through RF modem's on client & server side & to set up PPP communication for data transfer

    hi
    can any1 over here help me out in how to establish connection between 2 RF modem's for data transfer , between client & server USing LABVIEW?
    I want to establish a connection between 2 PC's through  RF modem on client & server side & to set up PPP communication for data transfer.
    (I have tried data transfer through RS-232 using TCP/IP whn the 2 PC's are connected over ethernet... which is working.
    I also tried connecting loopback cable between 2 PC's COM port & geting data transfer using VIsa configure serial port & other visa functions  ... which is working)
    can u guide me how to establish connection between 2 RF modem's using LABview?
    & how does the data transfer take place between 2 RF modems through RS-232?
    is it using TCP/IP?
    If you got any links to go abt this issue do send me related links .. or any examples .....
    I am currently using Labview version 8.
    Waiting in anticipation.. reply ASAP..
    thanking you
    Regards
    Yogan..

    Howdy yogan,
    Maybe you could clarify a few things for me, and we'll see how we can help ya. TCP/IP protocol occurs through an ethernet connection; RS-232 communication occurs through an RS-232 serial connection, typically through a cable that has a DB9 connector on both ends. Do you mean that the RF modems in question have the option to communicate via RS-232 and/or via TCP/IP ethernet? Specific information like the manufacturer of your RF modems, the model number of your RF modems, and how you connect the modems to the PC would enable us to give you more efficient support.
    You can check our Instrument Driver Network (IDNet) to see if a plug-and-play/IVI driver already exists for your RF modem. (You'll need to know its manufacturer and model number.) In the case that you do find an IDNet driver for your modem, you can use this KnowledgeBase article for instructions on how to use the driver.
    Another excellent resource to consider is the NI Example Finder. You can access this within LabVIEW by navigating to Help»Find Examples and then searching for serial or TCP/IP examples.
    Message Edited by pBerg on 03-10-2008 04:35 PM
    Warm regards,
    pBerg

  • Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

    Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

    Hi, KK93. 
    Sometimes a simple power cycle of the router and Mac can resolve the issue.  However, try the steps in the article below to troubleshoot the Wi-Fi issue with your MacBook.
    Troubleshooting Wi-Fi issues in OS X
    http://support.apple.com/kb/HT4628
    Also, see the article below to make sure the router setting have been optimized for performance.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Cheers,
    Jason

  • Hi I am having problem connecting my mac and iphone6 through AirDrop

    HI I am having problem connecting my mac and iphone6 through Air Drop

    You don't give any information about your Mac but note the quote below which states that it must be a 2012 or later model with Yosemite installed. The quote is from Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support which also contains some other things that may help.
    In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
    your iOS device needs to include a lightning connector
    your iOS device needs iOS 7 or later installed
    your Mac needs to be a 2012 or later model with OS X Yosemite installed
    Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.

Maybe you are looking for