Problem connecting to one website, tracert shows timeout at 7 & 8

Hi all, So I am having issues connecting to one website. Everytime I run tracert it shows a similar timeout. I am not sure what is causing this. My web browsing otherwise is great. Just having issues with this one website. Below is a sample of tracert results: Tracing route to ip-160-153-59-163.ip.secureserver.net [160.153.59.163]
over a maximum of 30 hops:1 7 ms 1 ms 4 ms router.asus.com [192.168.1.1]
2 14 ms 16 ms 11 ms 96.120.37.65
3 13 ms 17 ms 12 ms 68.85.125.137
4 14 ms 14 ms 13 ms te-0-4-0-6-ar01.northdade.fl.pompano.comcast.net
[69.139.180.229]
5 15 ms 14 ms 17 ms be-20214-cr01.miami.fl.ibone.comcast.net [68.86.
90.205]
6 13 ms 13 ms 13 ms ae12.edge2.Miami1.level3.net [4.68.127.205]
7 * * * Request timed out.
8 * * * Request timed out.
9 66 ms 63 ms 63 ms 4.34.191.254
10 78 ms 74 ms 98 ms be38.trmc0215-01.ars.mgmt.phx3.gdg [184.168.0.69
11 75 ms 75 ms 73 ms be38.trmc0215-01.ars.mgmt.phx3.gdg [184.168.0.69
12 66 ms 67 ms 96 ms ip-97-74-255-129.ip.secureserver.net [97.74.255.
129]
13 65 ms 73 ms 65 ms ip-160-153-59-163.ip.secureserver.net [160.153.5
9.163]Trace complete. Thanks in advance for any help.

Hi, Thanks for the reply. I've tried contacting the host and they are telling me it's an issue with my isp. I can access the website with no problems from other devices just not on my pc when I go through my comcast connection. I have been having this issue for a few days now. I will try to contact the host again. Is there anything I can do to prove that it is an issue with the host? Thanks

Similar Messages

Cannot connect to facebook but have no problem connecting to other websites

I cannot connect to facebook but have not problem connecting to other website? How can I change check this problem?

Andrew Heckler
Re: Unable to access Facebook from ANY browser on my Mac (suddenly)
Dec 21, 2012 7:00 PM (in response to dpman2008)
I had the same problem, and I just fixed it. See this thread-https://discussions.apple.com/thread/4612888?start=0&tstart=0
Let me know if this works!
Klickut: This solved my problem. I'm now left wondering how the hosts file became corupt or modified that blocked Facebook only?

Won't connect to one website

I have a 2009 Mac Book Pro. Last couple of days, our internet connection has been slow. Today, it crashes for awhile and when it returns, I cant get the one website I need to load on any of my browsers (Chrome, Safari, Firefox). I cleared caches, restarted, all for nothing. And, my wife's computer, 3 feet away, same IP address, connects just fine. Any ideas? I'm not entirely sure this is a Mac issue but I'm stumped. Every other website (including other sites I manage on the same server) loads fine.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Can't connect to one website

My airport extreme n is preventing access to one specific website, for an educational institution.
I have confirmed that the problem is the router by plugging my computer directly into the modem and accessing the website.
I have tried restoring factory default settings but the problem persists.
Help! I need to access this website!
I am running OS10.6; I could imagine a problem in the interaction between my software and the router, but, as I said, I can connect to the website by bypassing the router, so the router is involved somehow.

yeah I see that traceroute. Now if a proxy allows you in, then what is happening is that website has blocked the ip address you have in your router. You may be able to call VZ tech support and have them break the lease on the ip address (you can use that verbiage) And then reboot the router, and you may get a new IP Address. The new ip address won't be blocked by the website just like it isn't blocking the ip address from the proxy.
You can also try you're luck with rebooting the router, and trying to get a new ip, chances are it will grab the same ip address, or if you really don't want to call Verizon, you can leave the router unplugged for about 5-30 minutes, and then when you turn it back on, your hope is that it gets a new ip on it's own.
So verizon isn't technically blocking it, because if it was you would be blocked 100% from getting there, but the site can impose blocks to certain ip's or blocks of ips, and it sounds like they have blocked the ip that you have.

There was a problem connecting to the internet. it show me it connecting

there was a problem connecting to the internet, please try againprint show me it connection

Hello @vernell1,
Welcome to the HP forums.
I understand that your Photosmart Premium is not able to connect to the internet.
I would like to help.
Sometimes simply turning the printer off then back on will clear the problem.
Chances are you have already done this.
I would try setting a manual DNS.
The following post by happytohelp01 has instructions to set the manual DNS.
It describes a Photosmart 7510 but the steps should be very similar.
Efax 7510 still won't work after turning off/on ePrint several times
If you encounter any problems along the way, please let me know.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Safari problem with only one website - help!

Hello, a webpage I contribute to has been upgraded the last couple of days, the owner says he "upgraded the content management system" and now for me Safari won't open it properly, the graphics are unaligned, some of the graphics are shoved to the other side of the site and it keeps slowly flashing. No-one else, Mac users and PC are reporting problems. It just seems to be my Mac, however, all other websites are fine for me in Safari. I emptied the cache, use OS 10.4.11, and use the newest Safari I can, I removed cookies, and all the little things I could think of - in truth I am not a technologically minded person, so am hoping you can please help! I have been told to use a different browser, but I like Safari and all all sites are fine - it works perfectly normally - can you think what it might be about my mac or software that needs upgrading or changing, or any tips?
Thanks so much!

Anyone? I hope so - I really could use the help!

Problems connecting Nexus One phone

Hi,
First post so be gentle!!
I have recently moved house and moved back to BT. I have opted for Option 3 Broadband/Phone and set up the Home Hub 2 as instructed and everything works fine.
The only problem is I cannot connect my Nexus One mobile phone to the wireless network. Previously, on the old network at my previous address, the phone connected to the wireless network with ease.
Just to be sure I replaced the Hub with another router and the phone connects to the wireless network, but obviously I would like to use the hub.
Help please?

try changing from b/g/n/to just b/g
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Bandwidth problem connecting with one person on my buddy list

I'm connected to the web via cable modem, which is connected to an Apple Extreme Base Station. I was able to video chat with my brother-in-law in LA who is connecting via DSL. Recently we can't video chat. Nothing seems to have been changed in either of our settings and we can both connect with others that we share in common in our Buddy list.
All we get now is the Not enough Bandwidth error. Any ideas why this is happening?

Error 22 will be the Quicktime setting, the Bandwidth setting in iChat or something the ISP is doing top the Connection speed.
Reinstalling Leopard for just that is not likely to change anything.
7:11 PM Saturday; January 12, 2008

Problem connecting to websites

Hey everybody,
I've recently been experiencing a problem connecting to certain websites. I'll get a "connecting to" or "waiting for" message from my browser but then nothing ever loads and after a few minutes I get a "timed out" error message from the browser.
What's strange is that this doesn't happen with all websites just 20 or 30% of those that I try to connect to. And, it's very consistent in that once this happens with a particular website I can never get a connection to again even if I quit or reset my browser or restart my computer. I say "once this happens" because I've noticed that some sites that I could navigate to a few days ago are now having this problem.
This definitely doesn't seem to be related to the standard Airport problems that we've all been having as I can easily and quickly get other pages to load just seconds after having this problem with a page (plus the signal fluctuation that seems to accompany the standard Airport slow down/connection drop doesn't seem to happen when I have this problem.)
Total mystery. It happens with Safari, Camino, and Firefox and always with the same pages in each. Maybe its software conflict but the only thing I've installed since this started happening is the iPhoto update that came out a while back.
I'm getting close to wiping my disk and reinstalling everything but I thought I'd check in and see if anyone else has experienced this and if there's an easier fix that's known. Thanks.
John
MacBook Pro 2.0 GHz 1GB DDR2 SDRAM Mac OS X (10.4.7) Macintosh Color Classic
MacBook Pro 2.0 GHz 1GB DDR2 SDRAM Mac OS X (10.4.6) Macintosh Color Classic
MacBook Pro 2.0 GHz 1GB DDR2 SDRAM Mac OS X (10.4.6) Macintosh Color Classic

Thanks for the reply but I don't think its a problem with the servers because I can go to another computer sharing the same internet connection and it can load these pages just fine. Then when I go back to my computer it still can't load the the exact same pages.
Furthermore, these are sites that I had no problem with before a week ago and now, once I have a connection problem with them once I can never get them to load on my computer again. It's definitely not a normal server overload problem.
I'm pretty stumped.
John
MacBook Pro 2.0 GHz 1GB DDR2 SDRAM Mac OS X (10.4.6) Macintosh Color Classic

Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

If you just reboot it, does the problem go away?

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my we

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!

Hello Els,
it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable.

When I publish my site on one specific page where i've added {tag_pagecontent} I get the error:Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.

When I publish my site on one specific page where I've added {tag_pagecontent} I get the error:
'Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.'
I'm trying to get a blog module going, I've even deleted the html insert bog with the tag in and re-published which then I don't get the error but as a result no blog either. But then I add the tag in again and publish the error comes back. I've used the dev console and it says that my musicians sample.css is out of date but why is it only out of date when I add in html to my muse site?
HELP!!!! I've searched other threads and to no avail I'm publishing so no direct ftp going on. the only thing I changed in business catalyst was the module stylesheet in order to style the blog. I've tried uploading and replacing all files nothing seems to work. the site is here:
http://www.musicstudentsforhire.co.uk/musicians-samples.html
It's only this page as it has the blog on. Also I've noticed when I've re-published occasionally it will show the mobile version on my desktop and not the desktop version??? no idea why that's happening so I've had to turn that off. any explanation on why that is happening would also be much appreciated.

I haven't received an answer as of yet, I'll post t on here when I do. I de-activated the mobile site because it's my clients site so he needs it to be operational during the day. I hope someone gives me an answer soon.

Roland UM-ONE CD-ROM does not mount on iMac OS 10.8.2 Roland driver for 10.8 installed as directed. No power ready light shows when connecting UM-ONE. System Profiler shows it, but not configured. Older UM-1X works fine. UM-ONE works on Dell Windows XP.

UM-ONE
Roland supplied CD-ROM does not mount or read by iMac OS 10.8.2, works with old TiBook and Dell laptop, however.
Got latest driver from RolandUS.com (um_1mx8d_v100), installed as directed.
No power ready light shows when connecting UM-ONE.
System Profile shows it there, but not configured.
With Audio MIDI Setup opened to MIDI Studio window, UM-ONE does not appear.
Tried many things without success. Tried swapping UM-1X (formerly on Dell laptop) with UM-ONE. UM-ONE installed and worked there without any issues. MIDI instrument communicates fine.
The UM-1X works without complaint and as expected when connected to any USB port on either the Dell or iMac, even a hub or keyboard port, just as it formerly had before changing operating systems, etc. It is old, but reliable.
Upshot is, for now, that UM-1X works with either the Dell or the iMac, but is currently attached to the iMac. UM-ONE (2011 model) only works with the Dell (Windows XP).

Same problem here! The only difference is that I'm using a MacBook pro 13 inch (2011)

I have developed one website and provied print fuctionality to print entire web from , but it is not printing the web page correctly, even in print preview it is showing wrong out put

i have developed one website and provied print fuctionality to print entire web from , but it is not printing the web page correctly, even in print preview it is showing wrong out put...

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.
Make sure you provide the URL for the problematic page, so they can see the problem for themselves.

I have Mail with 5 accounts. The problem is that one of them is constantly active, that is with the moving wheel showing a search for new mails.

I have Mail with 5 accounts. The problem is that one of them is constantly active, that is, with the moving wheel showing a search for new mails, while the others accounts are not active.

hello
Would not take the moving wheel as indication that account is active. There could be other reasons for it. From the menu Window, choose 'connection doctor' that will show you how each account has connected. Next, from the Window menu choose 'activity veiwer' that will show you exactly what activity is causing the moving wheel.

Problem connecting to one website, tracert shows timeout at 7 & 8

Similar Messages

Maybe you are looking for