Problem connecting to the inernet with iMac OSX 8.6

My friend has a very old iMac, running OS X 8.6, that isn't connecting to the internet. It is connected directly to an Embarq (Zyxel) 660 DSL modem. The modems lights are are all lit, including the ethernet light. I've set the TCP/IP settings to DHCP, but I can't get into the modem to find out what the DNS is. I've tried using Internet Explorer and Netscape Navigator to access the internet but it keeps telling me that the TCP/IP needs to be configured and activated. I've tried restarting the iMac after saving the TCP/IP settings, and have tried restarting the modem.
Can somebody give me a solution? or a way to configure the iMac to view the internet?

After using the TCP/IP Control Panel, you must close the window and save changes to have them take effect. Then do something that would send you out to the Internet, such as set Network Time, open a Browser and select a Web page, or ask for Software Update.
Then open the TCP/IP Control Panel again, and check the assigned IP Address. If 169.254.xxx.yyy, you are talking only to yourself, and may have a bad/wrong cable or similar physical problem.
From Zyxel specs, that looks like a router, so it should be able to do DHCP. There are a couple of ranges of Internet addresses that are commonly used for these: 192.168.0.1 is very common. try entering that in a Browser.
There is a page of .pdfs of User Guides for those here:
Zyxel Download Library: User's Guide Download

Similar Messages

  • Airport extreme loses internet connection all the time with imac and macbook pro

    I keep losing the internet connection with airport extreme on my imac and macbook pro but NOT with my pc

    Ok, so when you say you lose internet connection, is it disconnecting from your wireless network so there are no bars?
    And are there usually full bars?

  • The message ~There was a problem connecting to the server "your-447023ae6b".appears when I try to play music transferred from my PC to my iMac. Files were transferred from my PC by a Genius. How do I sort it? Next appointment with genius is 5 days away!

    The message ~There was a problem connecting to the server “your-447023ae6b”.appears when I try to play music transferred from my PC to my iMac. Files were transferred from my PC by a Genius. How do I sort it? Next appointment with genius is 5 days away!

    Hi
    Thanks this has helped me solve the problem.
    I used the Outlook Anywhere connectivity tester you suggested. Selected Outlook autodiscover.
    It told me that it could not resolve things on any of the 4 tests.
    I saw that using the last test "Attempting to contact the Autodiscover service using the DNS SRV redirect method", was the only one likely to work in my case.
    I had already changed 3 entries in dns to point at my DDNS address but this had not worked, from the errors I could see that it was just the certificate name not matching so I changed the DNS entries for Autodiscover, autoconfig and _autodiscover._tcp
    to be webmail.domain.com which is a CNAME to my ddns address for the broadband router, which in turn forwards ports 80 and 443 to the exchange server for owa and activesync access. I got an error message saying that I had an illegal entry in my SRV record
    as a CNAME is not allowed, but it saved the change anyway.
    I reran the test and it worked.I can now make new outlook clients attach teo exchange.
    Thank you, after 8 hours yesterday of trying to reolve this I suddnely got it to work on one laptop but the other still would not and had lost track of what I could have changed so had no idea what actually made it work.
    Thank you for your suggestion.

  • There was a problem connecting to the server "...iMac"

    I keep getting the error message, "There was a problem connecting to the server ..."iMac."  I have Mavericks 10.9.2 on both my Macbook Pro and my iMac.  The Macbook is the system having issues.  I've seen "fixes" for Time Machine for Lion.  I have addressed this, and it does not seem to be the problem.  I've deleted all servers from the list, unmounted Time Machine and turned it off and back on again to refresh the settings, turned sharing off and back on.
    Any Mavericks ideas out there?

    The subject of the discussion you linked to is unrelated.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password. Reboot and recreate the network settings.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • Installed OSX 10.9.5  Error: "There was a problem connecting to the server "SERVER"" When connecting to Windows Server

    Installed OSX 10.9.5 on three MacBookPRO's now all of them have lost access to our Windows 2003 Server.  I get the message "There was a problem connecting to the server "SERVER". Note this was previously connecting with 10.9.4.
    I understand 10.9.5 was giving us improvements in the reliability of SMB2 but this is now much worse.
    Help!

    Installed OSX 10.9.5 on three MacBookPRO's now all of them have lost access to our Windows 2003 Server.  I get the message "There was a problem connecting to the server "SERVER". Note this was previously connecting with 10.9.4.
    I understand 10.9.5 was giving us improvements in the reliability of SMB2 but this is now much worse.
    Help!

  • I'm trying to set up my Ipod, but when I go to sign in with an apple ID it says 'Could not sign in: there was a problem connecting to the server'.

    I just bought a 3rd generation ipod touch. It was professionally refurbished. I'm trying to set it up, and everything seems to be working fine, until we get to the wifi. I live on campus and our wifi is username and password protected. I signed in and everything seemed to work fine, and in the top left hand corner I have all the bars for wifi. However, when I go to sign in with an apple ID it says 'Could no sign in: there was a problem connecting to the server'. I've tried turning it on and off again, tried signing on to our wifi again, but it all isn't working. What can I do?

    I also encountered the same problem. Try using a different email address or try signing in later.

  • My imac and ipad2 will not connect to the internet with Windstream using an 2wire DSL modem.

    Help my brand new imac and ipad2 will not connect to the internet with Windstream using an "2WIRE" DSL modem.  Windstream tech service is useless.  i can connect with the built in router through Ethernet or wireless, but still no connecting to internet, help!  windstream said everything is working on their end, yea right.  What i do know is that both the mac and ipad work at other places and can connect with wireless connected to the internet, so i know it's not the apple products. 
    these are brand new machines with lion.
    This is my first mac, so I’m still new to how it works, which is not helping either so a detailed help would be great.  Please help before my wife losses it
    thanks

    There is a 2701HG-B, and a 2701HG-D.  If not labelled on the modem, ask Windstream which one they presently supply or how to tell the difference.
    By the way tell your wife it isn't that bad.  At least you have an ethernet DSL modem.  There were times where DSL modems had RJ-11, USB, and Ethernet, and all three were used to provide access.  At least now only the craziest DSL providers still use those modems.

  • It says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

    I just got my new iPad Mini2, and when I choose "sign in with your apple ID", it says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

    I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

    I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
    They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
    I don;t have the drive shared out at all at the moment, is this necessary?  How do I do this if so?
    I have attached the screen shots of all the settings.
    Thanks again for your help.

  • When I enter my password to start my atv it tells me, that "there was a problem connecting to the network."  My Ipad works fine but not my new atv.  I have reset my password multiple times with no help.  I have also rebooted my wireless server.take it bac

    When I enter my password to start my atv it tells me, that "there was a problem connecting to the network."  My Ipad works fine in my house, but not my new atv.  I have reset my password multiple times with no help.  I have also rebooted my wireless server.  Do I take it back?

    Where is everyone????  Does anyone have an answer???
    Allik1

  • "there was a problem connecting to the server. URLS with the type 'file' are not supported"

    i have a new macbook pro 13" and every 6 minutes or so it pops up a window that says "there was a problem connecting to the server. URLS with the type 'file' are not supported". it never seems to cause any problems but is supremely annoying. how can i make this come to an end?

    I tried someone's solution of taking another external disc and plugging it in, then when it showed up and time machine asked if I wanted to use it or that someone might be trying to trick me, I chose not use it.  Then I  shut down my computer, plugged in the original Lacie, and rebooted the computer and all seems to work fine now-- the Lacie appears on my desktop and all seeems to be in working order. Who knows why or anything else,- as weird as it gets- but for now things seemed fixed--- maybe others can try this too-- it worked for me so far.

  • "There was a problem connecting to the server.   URLs with the type "file:" are not supported.  Why?  What can be done to eliminate it?

    After upgrading to Mountain Lion, I repeatedly get this message:  "There was a problem connecting to the server.   URLs with the type "file:" are not supported. 
    Why? 
    What can be done to eliminate it?

    Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

  • Message - There was a problem connecting to the server. URLs with the type "file:" are not supported

    new macbook pro receving this message: There was a problem connecting to the server. URLs with the type "file:" are not supported. What is causing this and how do

    Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

  • There was a problem connecting to the server. URLs with the type "file:" are not supported. OK

    I have just upgraded to Mountain Lion from Leopard, but now I keep getting this message when I open some web-pages and every time I wake the Mac up after going to sleep. For some odd reason I get it in Swedish sometimes (installed language) and some times in English...
    There was a problem connecting to the server.
    URLs with the type "file:" are not supported.
    OK
    What is this and how can I get rid of it. I use Firefox and have updated to latest version.

    Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

  • Since installing Lion I keep getting the error message 'there was a problem connecting to the server. URLs with the type 'file:" are not supported"' How can I fix this?

    since installing Lion I keep getting the error message 'there was a problem connecting to the server. URLs with the type 'file:" are not supported"' How can I fix this?

    A Davey1 wrote:
    Not a nice answer!
    Posting "Check the 'More like this'" area and not simply providing the answer is a great way to make these groups worthless.
    You're ignoring context.  On the old Apple Discussion Groups I never posted replies like that, instead giving people relatively detailed answers.  The new Apple Support Communities made things worse by introducing certain inefficiencies.  Then came Lion.  The flood of messages that came with Lion required a painful choice for any of the people who had been helping here: (1) Give quality responses to a few questions and ignore the rest.  (2) When applicable, give a brief answer such as the one that you found objectionable.  (3) Give up all the other normal activities of life and spend full time trying to answer questions here.
    People who needed help with Lion problems seemed to have trouble discovering existing message threads that described how to solve their problems.  I never posted the suggestion of "Check the 'More like this' area" without verifying that the help that the poster needed could be found there.  Even doing that, what I posted saved me time that I could use to help someone else.
    The people helping here are all volunteers.  None of them is being paid for the time they spend here.  They all have a life outside of Apple Support Communities.  It's arrogant of you to demand that people helping here spend more time than they already do.

Maybe you are looking for

  • Adding folder to library...

    Hello all, I've had a new computer built that has Vista on it... and before I did, I was proud of myself for backing up all my files, including my music, on an external drive. However, when I try to "File>Add folder to library" and choose the folder

  • Import GL opening balance,AR and AP aging with each open invoice data

    We tried to use Data Transfer Workbench to import GL opening balance back to 2007 year end but got an error "can not post to Control Account".  In Admin>Sys Init> Opening Balances> GL opening, Businesss Partner, 1099 opening balance can import all op

  • Delivery output print preview issue.

    Hello Friends, While going for the print preview of the outbound delivery by T-code VL71 i am getting the message--> "Output could not be displayed (it may not be complete) Message no. VN069" As i have maintained VV21 & output type in the delivery. P

  • SD Complaint Management

    Hello I try  to customize ECC 6.0 SD Complaint Management. Only thing I found is SPRO-Point in billing, where i can define complaint reasons and setup follow up activities (T-code . Unfortunatly our IDES system has no settings in customizing and also

  • Cannot Access Shortcut Menu for Adding Input/Output in Formula Node

    This is a wierd problem. I cannot access the shortcut menu in formula node. I right click the border, nothing happens. Anyone run into this before? Is there any other way to add inputs and outputs? I am running Vision Builder AI and want to use a for