Problem connecting wirelessly to router

I am having problems connecting to a router. I know it works because another computer can connect, no problem. It requests a WPA-2 password and the other computer enters an 8-digit code and they connect, no problem. My MacAir reconizes the network (router) but won't accept the same code the other laptop sitting next to me is able to use. The laptop that can get in asked for a "security key." The Mac asks for a password. Not sure if the nuance makes a difference. Has anyone else had issues like this?

Welcome to Apple DIscussions.
This could be a problem with the router settings as much, or more, than the security settings. Follow the link if you own/have access to the router setup software.
Help us help you. The more complete the description of your problem is (what MBA you're using - there are many versions going back to '08, what OS you're using -there's a lot of those too, what Application you're using there are many, a full compete description, the text or screen shot of any error messages) the more assistance we can provide, and, the sooner we can provide it.
WFIW many users who have recently upgraded to Mavericks have reported a lot of WIFI problems... connecting, and maintianing connectios are among them, that's why the age and OS of your machine are pertient bits of background that can help find a solution to your issue.

Similar Messages

My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

Thank you for your suggestion but I have already had a couple of phone sessions with NETGEAR support and they don't see any problems with the router settings etc. They referred me to Apple support, who helped me discover that it is possible to communicate with the router but only if I turn off the encryption/security software, which I don't want to do. The frustrating thing is that I can connect wirelessly from a laptop running Windows 7 and two Anroid smart phones, with WPA-2 in place, without a problem. Do you have any other ideas?

Having problems connecting wireless?

Hi All,
I just got my MACBOOK two days ago and having some issues connecting wireless.. I can connect to my LINKSYS wireless router but it seems after about 7 mins of use I can no longer connect to the router. I have reset the router and even changed it but I still seem to have the same issue.
If I use only PC's on my wireless network I don't have any issues.. It seems like the MAC messes up my network and it will not work again unless I take the power out of the router and then modem.
I have used my comp at a friends house connecting to their linksys router without any issues.
ANY IDEAS?
THANKS

If you have no problems connecting wirelessly on another network, then I'd look at your router as the probably culprit. Do you have any problems connecting to the router by Ethernet cable? Are your Network preferences configured properly? Have there been any firmware updates released for your router that you have not installed? Have you tried a different router in your home network? For example, try a D-Link DI-524. I've had good success with it. I've never had a really satisfactory experience with LinkSys, but that's my personal experience.

WRV54G - Problems connecting wirelessly with Windows 7

I'm unable to connect wirelessly to router using a HP laptop with windows 7. I have 2 xp laptops that connect without a problem. The HP laptop finds network, but once I click on network to connect, it does not ask for the security code therefore I can not connect to network.

Hi. I think you need to verify your router MAC Filtering. I would suggest to disable it first. Check this link,
http://linksys.custhelp.com/cgibin/linksys.cfg/php/enduser/std_adp.phpp_faqid=20600&p_created=125498...
Also, make sure you're using the latest firmware for the router. Don't forget to manage the Profile of the card as stated on the link provided above. Thanks.

Problem connecting wirelessly with HP 6310 printer

Since our computer automatically updated from Windows 8 to 8.1 a couple of weeks ago, we have not been able to use our HP 6310 printer. It connects with the computer through a wireless internet router. Have updated the HP driver to 8.1 to no avail. Any suggestions would be appreciated. Thanks.

Hey there @Benjie18 ,
I read your post about how you cannot use your Officejet 6310 printer since upgrading to Windows 8.1. I have a few ideas that come to mind that I am going to suggest and I hope they help!
1. Run the Print and Scan Doctor, which may find the problem and correct it.
2. Make sure the printer can make copies.
3. Try Uninstalling the Printer Software, restarting the PC and reinstall - HP Photosmart and Officejet Full Feature Software and Drivers
Let me know the results. If you run into any issues or errors, let me know!
Have a great day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Problem connecting wirelessly to the internet WRT54G

I'm having strange issues with my wrt54g router - as long as my computers are plugged into it through ethernet, I have no problem accessing the internet. However, I can't access the internet if I connect to the router using wireless (my computers can connect to the router itself wirelessly, just can't access the internet from it). I've had this router for a little under a year and it used to work fine. Then I stopped using it for a few months, forgot my password and had to hit the reset button when I wanted to set it back up again yesterday. I've tried connecting multiple computers to it wirelessly, including the old one that used to work with it, but none of them can access the internet.
I'm really not sure what could be wrong. Do I need to reinstall the router software that came with the router itself (though I'm not sure how this can help..)? Or is there some button/setting on the router that allows it to access the internet that I could have missed? I checked and wireless is enabled under wireless settings.
I'm running Vista on one computer and XP on another.

Connect the XP computer to the router at Ethernet Port ....
Reset the router for 20-30 seconds ....
Run the Disc for the setup wizard
Let me know if any other problem occurs...

WRT54G Can't play on xbox live and connect wirelessly to router or internet from comp at same time

Hi guys.
I have a WRT54G and since I have had it I havent been able to connect wirelessly to see my router or get online form my comp while my xbox 360 is on xbox live. My other computer though, which is wired, can connect online anytime wether the xbox 360 is on line or not. Any help would be nice.

I have a similar problem to this. I do some online gaming, and while my roommates are playing XBOX live (which is a lot now that halo 3 came out) I cant even connect, and if i do connect i get such a high latency it is unplayable. I would also greatly appreciate any help on this issue.

Can't connect wirelessly to router

I got a new laptop and a new router wrt160n v3 everything was going fine, my connection wirelessly was laggy but that was okay. One day by mistake i set myself as an "intruder" on my router and deleted myself off the map. I tried everything, putting the cd and reset the settings but no matter how hard i can't connect wirelessly to my router anymore. Now i have to stick a wire to my router and sit beside my computer. also when i do connect to it, it says that i cant or something. I need help asap !
question : how can i connect wirelessly back to my router

This is certainly an unusual problem, but from your description, I would have to assume that the router memorized the MAC address of your wireless adapter, and won't let you reconnect.
The best solution would be to download and install (or re-install) the lastest firmware for your router, then reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it --- you must setup the router from scratch.
Alternatively, you might be able to change the MAC address of your wireless adapter. The downside of this solution is that if you ever re-install your computer, you will need to remember to change the wireless adapter's MAC address again.
Message Edited by toomanydonuts on 01-17-2010 12:10 AM

Connecting Wireless N Router to Existing Fios Router for NAS Access

What I'm Trying To Do:
    I have a 1TB Western Digital MyBook Live as my new NAS for accessing music, photos, video. Accessing this data through the Actiontec MI424WR Wireless 802.11b/g is not the best performance. I want to add in a wireless-N router to the mix but know I have to keep my existing Fios Router in the mix.
    Understanding that the Gigabit part of a wireless-N Gigabit router is for the wired speed increase, do I need to get a gigabit router for when I plug in my NAS, or does that not make a difference.
     Basically, I know that the wireless-N will get me better access wirelessly, but will connecting the NAS via Gigabit give me an extra boost as well?
According to most posts, getting a wireless-N router directly from Fios is near impossible, so bridging a new router to the existing one seems like the best bet.
Thanks for any help anyone has.

I bridged an N router to my MI424WR,which is also an N router and really did not notice a big performance jump,i am satisfied with the MI424WR.even though my linskys N router is more expensive.

Samsung 325W Printer Problem - Connecting wirelessly

Hi,
I recently bought the above printer and installed it according to the instructions. Everything seems to be fine, but when I haven't used the printer for a day or so, my iMac 'loses' it and I have to reinstall it all again. This is obviously a PITA!
Has anyone had a similar problem with this printer and managed to resole it, please?
I also have a HP multifunction device which is also connected wirelessly and this seems to work without too many issues, although it also disappears occasionally.
Any help would be appreciated.

Never mind. A reinstall did it!

Problem Connecting wirelessly to BT Voayger 2500v

Hi there,
I'm having trouble connecting wirelessly to my BT Voayger 2500v wireless router. I am able to connect to the web with it no worries when it is connected by an Ethernet cable. But I would like to connect to it via Airport. In the Airport menu at the top right of the screen the router appears. I disconnect the Ethernet cable from the computer and select the router from the list and it says it is connected. But when I open up a page in Safari it says that I am not connected to the web. At no point does it ask me for a password. When I try to connect to other available networks in the building (not mine) it does ask for a password which I believe is normal behaviour, but not for my router?
Any ideas?
Thanks so much!
Regards
The Mervinator

Mervinator, Welcome to the discussion area!
At no point does it ask me for a password.
Did you enable wireless encryption on your router? If not, it won't ask you for a password.

Problem connecting wirelessly to printer

Hi, I used to be able to connect wirelessly to my HP Envy 120, and then for some reason it stopped working from my Macbook - I can still print from my iPad, and my daughter can print from her PC. Any ideas?

Hello themaven. Welcome to the Apple Discussions!
Does your client's ISP require that she registers the MAC address of the device that will be connected to their Internet service? If not, then it is possible that the communication between the Internet modem & the Time Capsule (TC) has not been properly established.
I suggest trying the following:
o Power-down the modem, TC, and computer(s); wait at least 10-15 minutes. Order is not critical.
o Power-up the modem; wait at least 10-15 minutes.
o Power-up the TC; wait at least 5-10 minutes.
o Power-up the computer(s).
The computer(s) should now have Internet connectivity from the TC whether they are connected to it by Ethernet or wireless. Please post back your results.

Problem connecting wirelessly with home hub 3.

Kodak gave me advice onthis problem. Entered security key in upper case instead of lower and it solved the problem . No help from BT on this.

paulweekspat wrote:
trying to connect kodak printer. i have resolved the issue with help from kodak. bt was no help at all. thanks anyway.
What john46 says is quite correct, also Kodak would give you NO support for setting up the Home Hub..
Thats not to say you would not have been given help on these forums if you had a problem connecting your printer and if we could not help,at least we might have been able to point you in the right direction.
http://support.en.kodak.co.uk/app/home/selected/true
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Laserjet 100 color MFP M175nw - problems connecting wirelessly to PC

I have just bought a Laserjet 100 color MFP M175nw and cannot connect wirelessly to my home network.
The installation goes to 99% and then gives an error message saying it took too long to connect, reboot and try again. Rebooted and tried again many times.
I have downloaded the latest installation prog. with the same result.
I have been able to connect with USB direct and can print, but not by Wi-Fi.
I have been able to connect the printer to my rooter by ethernet cable and can print that way also.
I am running Win 8.1 on a 64bit Lenovo computer.
Please can you advise a solution?
Thanks

Hi,
Yes. It's a bit embarrassing. Eventually, I went back to the instructions, and followed them to the letter for the WIFI setup - and it worked .
For me, the adage is true - "When all else fails, read the instructions."
So embarrassing!!!!!
Hope this helps.

Problem connecting wirelessly to router

Similar Messages

Maybe you are looking for