Problem connection iPad to net gear wn2000rpt
All appears to be connected, lights are all green but does connect to Internet
Rogers-4-
I doubt the iPad's AirPrint system will work through a print server, even if it is serving an AirPrint printer. There could be a problem communicating Bonjour data between the printer and the iPad. Contact the server manufacturer for their opinion/advice.
The iPad prints over WiFi. If there is a WiFi path to the print server, one of the printing Apps like Print n Share may work for you. You can contact EuroSmartz and ask if their Apps would work, but the only way to be sure may be to try it.
Search the iTunes App Store to see if your printer's manufacturer has a free printing App. If so, you can give it a try.
Fred
Similar Messages
-
How to use time capsule as hard drive and connect with existing net gear router
I have a netgear D6300 router, which i use to connect to internet - which is excellent so far for my downloads and games etc for my PS4 and hence am keen to continue using it. I bought the Airport time capsule for wireless storage, and when i set it up, I was advised on setup to connect the TC to my router, and it did what it needed to do.
Now, in order to connect to internet, i need to connect wifi to net gear router, but to access time capsule, i need to change wifi connection to my newly created wifi network with TC.
I want to use TC as a backup storage for my mac (its a 3TB TC), but also, my laptop has only 500gb hard drive which is now half full from downloads, so i want to transfer all my downloads to my TC and use it as an external hard drive, and future downloads to TC - but when i connect to wifi of TC, i can copy my folder on my mac, but not paste it to TC in finder. (the only thing in TC is an image of tmg of my macbook from first backup.).
How do i use TC as an external HD - there wasn't much difference in price of external wifi/wireless HD between non-TC and TC at 3gb, so i just thought i'd go for the airport TC option.
And is it possible to keep connected to wifi internet via net gear router, AND wifi TC - the whole point i bought it (from US shipped to australia on eBay, therefore not able to send back) was to use TC as external large HD via wifi, but keep my net gear router going.
Surely there is a way to not having to flick between wifi connections of TC and net gear internet.
When i'm connected to TC, i can't access internet, only TC.
And I don't really want to connect TC to my router via ethernet cable, as too many cables.
This can't be a difficult situation to manage, but i'm not sure how to do it.
ThanksAnd I don't really want to connect TC to my router via ethernet cable, as too many cables.
Sorry but you have very little choice.
The TC can join to a wireless network.. but it is flakey, poor, slow and highly NOT recommended way to do things.
Nevertheless if you want to give it a try .. here is the method.
How do I setup my time capsule with wireless internet?
You SHOULD, plug the TC into the Netgear and run it in bridge mode.. you set the wireless to create a wireless network.. then when you connect to the TC it will be also connected to the internet and fast.
(if you don't do that you may as well have used a USB drive plugged into the Netgear, as it would be just as good).
TC is not actually designed for mixing Time Machine backups and files.. but if you are just storing downloads that is ok.. but I strongly recommend you use a DMG or sparsebundle to prevent the TM and the data from messing each other.
See Pondini instructions here.
Q http://pondini.org/TM/Time_Capsule.html -
Has anyone had problems connecting iPad mini to Jawbone speakers via Bluetooth?
Has anyone had problems connecting iPad mini to a Jawbone speaker system via Bluetooth?
What versions BT are involved? Is AVD2P suppoted on both?
-
Problem connecting iPad to Wi Fi
Hi,
Lately I'm having problem connecting my iPad to Wi Fi. when I try I get the following message:
"hotspot login could not open the page because the server stopped responding"
This only happen on new Wi Fi locations.
Any one have an idea why it happens and how to solve this ?Have also tried resetting wifi settings on ipad
Did you reset network settings?
Tap Settings / General / Reset / Reset Network Settings.
Restart the iPad. -
Problems connecting iPad to TV
Hi,
Wonder if you guys can help. Connected my iPad 4th gen to my HDTV via digital av adaptor and HDMI cable. There's sound but no picture. Also once the iPad is connected to the tv, I noticed that the speed of the iPad has slowed down.Check that the connectors are fully seated. Do you have another TV to try it on? Could be a problem with the digital av adaptor or HDMI cable.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Cheers, Tom -
Problem Connecting iPad or iPhone to Wifi (Linksys E1000)
I recently moved from my parent's house to a condo and I am having trouble connecting my iPad or iPhone to my WiFi. I have not problem with my main desktop (connected to the router via ethernet), but my iPad and iPhone fails to connect to the network. I don't have a problem finding the network (FunnyWillow) but when I try to log in, it says "Failed to join "FunnyWillow" - "Unable to join the network "FunnyWillow" ". How do I resolve this problem?
Solved!
Go to Solution.Alright, my current firmware version is (v1.0.01 build 7Apr 15, 2010). I tried to update it by downloading version 2.1, but when IZArc opened, there was nothing in the .bin to extract. I checked my status afterwards on (http://192.168.1.1/Status_Router.asp) and it still says I am using the v.1.0.01... version.
I reset the router, and network and tried to update the firmware and the samething happened with the update. I tried to connect my iPhone/pad and the same error message appeared. I have a good feeling that getting that firmware update would solve it, I guess U don't know how to go about it. -
all of a sudden, I do not have internet connectivity. Checked all network settings and TV recognizes that a wireless network is operational. the internet signal to my imac is fine. what does the rapid flashing APPLE TV box indicated other than that there is a problem ??
The flashing light is indicative of a problem with the unit. I would connect to iTunes to restore
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US -
Having problems connecting iPad 4S to monitor with Apple adapter and HDMI cable.
Purchased an Apple adapter to connect to an HDMI cable. The connections were secure and the image on the iPad was duplicated on the monitor; however, there was a lot of "snow" on the monitor. I tried turning off the power to the iPad and then starting back up, but that didn't work. Once when checking the connections the image cleared for a few seconds, but then the "snow" came back. Any ideas?
sounds like either an issue with the HDMi cable, or the connection at the TV possibly.
Try another HDMI port on your TV if there is one, or a different cable. -
Anyone had problems connecting iPad 2 to BT home Hub?
My mum is having difficulties setting up iPad to BT Home Hub 2.
While it recognises the network it asks for IP Addressn Subnet Mask, Router and DNS information.
BT claim they cannot help but need Apple to fix...
Really?I would not rely on the hotspot map, as its not very accurate, and you have to be very close to a BT Wifi hotspot, to get a connection.
If it works at home, then your ipad must be working properly.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Having problems connecting iPad 2 to iPhone hotspot.
As the title suggests, my iPad will not connect to my iPhone hotspot. I keep receiving an "Unable to connect" error. The link symbol is showing up when I search for available networks, but no connection happens. I have tried to forget the network and re-add it, same error. I don't know enough to go fiddling further with settings. I have read about changing the settings when using a modem router but unsure if the fixes there are relevant when using iPhone as a hotspot. Any guidance would be appreciated.
The hotspot works through Bluetooth. Switch the personal hotspot on in your iphone first You will then need to enable Bluetooth on your iPad and disconnect your wifi. You should then see your iPhone in the Bluetooth connections on the ipad and can pair with it from there.
Took me ages to work this out for myself. I only have a wifi iPad too.
Good luck again! -
My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load
Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility. -
My ipad has been a little glitchy for the last couple of weeks....not able to load pages because of DNS lookup failure and really slow loading...some of which has to do with the DSL service I have, but I followed the directions on one of the Apple wi-fi issues pages to reset network all connections..which I did, and now the Ipad cannot connect to WiFi because it will not accept (or cannot resolve..or??) password. I am sure I am typing the password correctly and have tried it on several routers..and it cannot cannect to any router properly even with the correct password. My laptop is connected just fine and it accepts the password and I have confirmed the password with the ISP and tried other routers.
So the question is what should I do if I am entering the right password and the Ipad can't sign itself on to the Wifi network?Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Have Net Gear router WNR2000v2. Apple laptop will connect to wi-fi, but iPad2 will not.iPad will not accept the password for the router.
I would Reboot the router/iPad/Laptop
change the Router/Network Password to all lower case & make sure your encryption is the same on all Apple units..Also make sure your router setup allows more/addition users..
Hope this helps// -
IPad printing to net gear print server
Is there a app available for printing to a net gear WGPS606 print server?
Rogers-4-
I doubt the iPad's AirPrint system will work through a print server, even if it is serving an AirPrint printer. There could be a problem communicating Bonjour data between the printer and the iPad. Contact the server manufacturer for their opinion/advice.
The iPad prints over WiFi. If there is a WiFi path to the print server, one of the printing Apps like Print n Share may work for you. You can contact EuroSmartz and ask if their Apps would work, but the only way to be sure may be to try it.
Search the iTunes App Store to see if your printer's manufacturer has a free printing App. If so, you can give it a try.
Fred -
I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my AirPort Express network. Is there a limit on the number of devices I can connect to the wireless network? I never have a problem connecting a new Apple product (AirBook, iPad) and even a basic laptop. Thanks for your help.
The AirPort Express Base Station (AX) can support up to ten (10) simultaneously connected Wi-Fi clients.
Maybe you are looking for
-
Error while loading and adding IC Transaction
I received the following error while loading IC Transaction through Load Tasks utility and adding IC Transaction through Process IC Transaction option Transactions Load - log: *'Cell does not support inter-company transaction details* Rajhi Holding;
-
Serious problem with text variables in table of contents
I posted this in the regular InDesign forum -- seems that there's no easy solution that would work well in a production environment (only suggestion was to convert the variables to text). However, thought I'd post it here to see if anyone on the scri
-
Cant Install HTTP Server on SUSE10
Hello, When I try to install HTTP Server from Oracle DB 10g Companion CD on a SUSE 10 with a working Oracle10g DB I get an error message where ever I call runInstaller so my installation never initiates. As in the installation documentation I change
-
I chat Voice icon does not appear
Im trying to Vocie chat with my gf, and she somehow managed to turn her voice chat button off, and now cannot get it to turn on again. we have tried everything, microphones, input out put, every menu, but the phone icons do not appear on her avatar i
-
I upgraded my 3GS to 4.1 last night, and now it keeps shutting off. I have to reset (home and power) to get it back on. Any suggestions?