Problem converting any AP to LAP - Cert not yet valid

All, I have a problem trying to convert APs to LAP.
I have the following scenario:
- 2 WLC 5508.
- For the WLC the image is 7.0.220.0
- 10 APs registered. 7 Cisco 1310 and 3 Cisco 1242.
- Time on the WLC indicates is July 4th 2013 - 19:20:00
I have 5 more APs ( Cisco 1231G and Cisco 1310) all of them are Autonomous.
Im using the Cisco upgrade tool, which I already use to convert the first 10 APs, and I have over and over the same problem, no matter if I use the Cisco 1231 or the Cisco 1310. Once I run the upgrade tool, in the middle of the process I had the following error on the AP:
*Mar  1 00:15:15.088: %SYS-5-CONFIG_I: Configured from console by console
*Mar  1 00:25:39.198: %SYS-6-CLOCKUPDATE: System clock has been updated from 00:25:39 UTC Fri Mar 1 2002 to 00:25:39 UTC Fri Mar 1 2002, configured from console by moncl on vty0 (181.142.103.159).
*Mar  1 00:25:40.395: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Mar  1 00:25:40.498: %SYS-5-CONFIG_I: Configured from console by moncl on vty0 (181.142.103.159)
*Mar  1 00:25:41.395: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jul  2 18:11:51.000: %SYS-6-CLOCKUPDATE: System clock has been updated from 00:25:41 UTC Fri Mar 1 2002 to 18:11:51 UTC Tue Jul 2 2013, configured from console by moncl on vty0 (181.142.103.159).
Jul  2 18:13:22.641: %SSH-5-ENABLED: SSH 1.99 has been enabled
Jul  2 18:14:14.498: %SYS-5-CONFIG_I: Configured from console by moncl on vty0 (181.142.103.159)
%CRYPTO_PKI: CA Cert not yet valid or is expired -
    start date: 13:41:22 UTC Jul 31 2003
    end   date: 13:41:22 UTC Apr 29 2013
xa2arcbdepo02#
I tried setting manually the clock and also using the clock of the WLC, but with the same result.
I also tried to convert manually, but with the same result.
Also Im using c1310-rcvk9w8-tar.124-21a.JA2.tar and c1200-rcvk9w8-tar.124-21a.JA2.tar
Please, I really need your help because Im stuck with this problem!!.
Thank you all!!

Following the info:
(Cisco Controller) >show time
Time............................................. Wed Jul  4 19:48:12 2013
Timezone delta................................... 0:0
Timezone location................................ (GMT -3:00) Buenos Aires (Agentina)
NTP Servers
    NTP Polling Interval.........................     86400
     Index     NTP Key Index     NTP Server      NTP Msg Auth Status
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.220.0
Bootloader Version............................... 1.0.1
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.3, Env 1.6, USB console 1.27
Build Type....................................... DATA + WPS
System Name...................................... WLC-EDASA_1
System Location.................................. Montecristo
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
IP Address....................................... 181.142.123.23
Last Reset....................................... Power on reset
System Up Time................................... 4 days 7 hrs 14 mins 1 secs
System Timezone Location......................... (GMT -3:00) Buenos Aires (Agentina)
Current Boot License Level....................... base
Current Boot License Type........................ Permanent
Next Boot License Level.......................... base
Next Boot License Type........................... Permanent
Configured Country............................... AR  - Argentina
--More-- or (q)uit
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +43 C
External Temperature............................. +27 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 4
Number of Active Clients......................... 4
Burned-in MAC Address............................ 2C:54:2D:72:CE:80
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 50
(Cisco Controller) >
xa2arcbdepo02#sh ver
Cisco IOS Software, C1310 Software (C1310-K9W7-M), Version 12.3(7)JA2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 18-Nov-05 12:55 by ssearch
ROM: Bootstrap program is C1310 boot loader
BOOTLDR: C1310 Boot Loader (C1310-BOOT-M) Version 12.2(15)JA,  RELEASE SOFTWARE (fc1)
xa2arcbdepo02 uptime is 1 hour, 27 minutes
System returned to ROM by power-on
System image file is "flash:/c1310-k9w7-mx.123-7.JA2/c1310-k9w7-mx.123-7.JA2"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-BR1310G-A-K9-R   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FOC08420N5Z
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
1 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:12:43:85:54:12
Part Number                          : 73-8960-03
PCA Assembly Number                  : 800-24963-02
PCA Revision Number                  : A0
PCB Serial Number                    : FOC08420N5Z
Top Assembly Part Number             : 800-25292-01
Top Assembly Serial Number           : FTX0844U0EW
Top Revision Number                  : A0
Product/Model Number                 : AIR-BR1310G-A-K9-R 
Configuration register is 0xF
xa2arcbdepo02#sh inventory
NAME: "BR1310", DESCR: "Cisco Aironet 1300 Series (IEEE 802.11g) Bridge"
PID: , VID: , SN: FTX0844U0EW
xa2arcbdepo02#sh ip int br
Interface                  IP-Address      OK? Method Status                Protocol
BVI1                       181.142.123.11  YES NVRAM  up                    up     
Dot11Radio0                unassigned      YES NVRAM  up                    up     
FastEthernet0              unassigned      YES NVRAM  up                    up     
xa2arcbdepo02#

Similar Messages

  • Outlook 2013 Clients certificate has expired warning or not yet valid

    Hello,
    We had been through a migration from exchange 2010 to 2013 in the last year but have had an ongoing issue with
    some Outlook clients getting a certificate warning after they launch the client.  Not all Outlook clients experience this.  We've just recently uninstalled exchange from our 2010 servers and shut them
    down.  What we have left are two 2013 servers in a DAG.  The certificate these Outlook clients are complaining about had expired in 2012.  Here is the warning they are getting:
    "Certificate has expired warning or not yet valid"
    I've been through numerous threads/sites regarding this error but it always ends up that there was an expired cert hanging out somewhere.  I cannot seem to find an expired cert anywhere...
    I've ran the 'Get-ExchangeCertificate | fl' cmdlet and I see 7 certs listed, none of which match the thumbprint on the Cert Warning on Outlook.
    When I check the registry of the Exchange servers here: HKLM>Software>Microsoft>SystemCertificates>My>Certificates
    I can see 7 certificate entries listed there and the thumbprint matches those of the cmdlet ran from
    EMS.
    OWA shows the correct cert expiring in 2015 and Outlook clients are pointed to the 2013 servers.  We do have a load balancer that AutoDiscover, OWA, SMTP are going through.  
    It seems like some of these Outlook clients are still looking at the decommissioned 2010 Exchange servers' old certificate.  Any ideas on how I can get outlook to point to the new certificate/server?
    Thanks.
    Rory
    Rory Schmitz

    Hi Rory,
    If possible, could you please post the Get-ExchangeCertificate | FL results about the certificate which is assigned with IIS service here?
    If the issue only happens for some users instead of all users, please create a new Outlook profile for the problematic user to check whether the issue persists. Please make sure the certificate name which is reported as expired or not valid is included
    in the IIS service certificate in your Exchange 2013.
    In Exchange server side, please restart IIS service by running IISReset /noforce from a command prompt window to have a try.
    Regards, 
    Winnie Liang
    TechNet Community Support

  • I get this message and site will not load"OCSP is not yet valid" how do I fix this

    MY system including firefox has begun not trusting any sites at all. I have to confirm exceptions to get onto the websites. All the certificates are bad "According to firefox" and after a while I get the OCSP is not yet valid error message too. what happens next??? can this be fixed?

    You're welcome.
    That may have been a fluke from yesterday's Daylight Savings time change here in North America, but if that happens again and you have a desktop PC the "coin" battery on the motherboard may need to be replaced.

  • Assertion not yet valid error in SHAREid

    We have SHAREid 2.5 and setup as destination. From time to time the user are getting a error like this. Any idea?
    Web Intersite Signon Error
    RECEIVER: ERROR: An invalid SAML Response was received: Assertion not yet valid; NotBefore = 2009-05-19T19:31:46Z; now = 2009-05-19T19:31:40Z
    I see there are fields for "Assertion Validity Period" in the Source Assertions sections. Can the client (source) modify the values on their side to resolve this issue?
    Thanks.
    Edited by: user504421 on May 21, 2009 12:00 PM

    The issue was with the clock on the IP side. The 2 federation servers were not synched.
    Thanks.

  • Any Apple.ca customers still "Not yet shipped"?

    I ordered a 8gb on the 18th and its still "Not yet shipped".
    engraved and express shipping.

    I ordered mine on sept 24 not engraved, and prepared for shipping since sept 25 (last night)
    (my first order from sept 10, never changed status and was engraved, so i cancelled it)

  • Problems converting any form of document in PDF Generator

    Hello,
    Could anybody help. I have successfully installed the PDF Generator 7.0.2 on an Windows server 2003 Standard edition. When I put documents into the In folder, I understand, it is supposed to convert the document to another format in the out folder. It is not working at all. I get the following error file:
    Failed to process job jobs.txt
    Error Code: 11,020
    Reason: The source file you submitted is not supported by this version of PDF Generator.
    The in and out folder is set up on the client machine.
    Please, help. Did I miss something out?
    Thanks
    Yvonne

    Hello everyone,
    I had the same problem but I resolved it.
    What you need to do is just copy the sample pdf generator (convertallfilestopdf) in the LiveCycle workbench.
    Just change 1 thing in the sample: in the SetFileName properties, you can see their is just 1 record in the mappings (location ...)
    Just delete this record!
    Second thing: create a watched folder under your pfd generator service.
    http://localhost:8080/adminui/, log on with username: administrator and password: password.
    Navigate to your new service (e.g. VDAB PDF Creations). Click on your pdf generator service and you can see 3 records. Choose for Watched Folder and click on "Add". Leave everyting as the standard except the operation name. Choose for "invoke". Now you can see there are several variables. Only 1 is required. The inputdocument.
    InputDocument: variable => *.*
    OutputPDF document: %F.pdf
    Now you can simply drop most of the file extensions (.doc, .jpg, .xls, ...) in the input folder and the service generate a PDF document.
    Kind regards,
    Steven De Smet
    IBM Benelux

  • The server's security certificate is not yet valid!

    I am getting this message with Google Chrome to access https sites (facebook.com for instance.
    This message is only received with my primary user, other users function properly.
    The system clock is set automatically and is showing the correct date.
    Advancing the system time setting manually about 2.5 month or so the browser returns an "expired" message.
    I am in web development and cannot simply replace my default user.
    Is there anywhere I can look to see what is causing this error?

    Hi krudesill,
    Welcome to Apple Support Communities.
    Are you seeing the same security certificate issue in Safari? The article linked below provides some information and a troubleshooting suggestion that may resolve the issue.
    OS X Mavericks: If your certificate isn’t being accepted
    http://support.apple.com/kb/PH14003
    If a certificate is not accepted, it may have expired or it may be invalid for the use to which it is being applied. For example, some certificates may be used for establishing a secure connection to a server but not for signing a document.
    The most common reason a certificate isn’t accepted is that the certificate authority’s root certificate isn’t trusted by your computer. Before your computer will trust a certificate authority, you must add the certificate authority to a keychain and set the certificate trust settings.
    Some apps (such as Safari) display the root certificate from the certificate authority as part of the message from the certificate authority. In this case, drag the root certificate icon to the desktop.
    Drag the certificate file onto the Keychain Access icon, or double-click the certificate file.
    Choose a keychain from the pop-up menu, then click OK.If you’re asked, type the name and password for an administrator user on this computer.
    Select the certificate, then choose File > Get Info.
    Click the Trust Settings disclosure triangle to display the trust policies for the certificate.
    To override the trust policies, select new trust settings from the pop-up menus.
    I hope this helps.
    -Jason

  • Trying to install Thunderbird on new computer. Get OCSP response that is not yet valid (contains date in future).

    Error code: sec_error_ocsp_future_response obtained when trying to connect on new computer to www.mozilla.org.

    Heh that was my thought when I saw your post on the index. Glad you figured it out.
    Whenever there is a error that involves date or time in past or future one should check the date and time on computer.

  • TS1398 My iphone 5 is does not appear to be remembering my home wifi network and fails to reconnect automatically to it.  My other iphone (4s) has no such problems.  Any suggestions?

    My iphone 5 does not appear to be remembering my home wifi network and connect to it automatically.  I have to reconnect manually each time.  My other iphone (4s w/iOS6) has no such problems.  Any suggestions? 

    It's not a bug in iOS 6, and it won't be fixed. It's usually caused by your phone having been paired to 2 different networks with the same SSID. So it needs to ask which one you meant. Occasionally be corrupt data in the network settings, which is why Allan suggested Forget This Network.

  • WARNING Could not yet initialize the graphics environment.

    Hello,
    When I run why I am getting this warning :
    Any thoughts?
    WARNING Could not yet initialize the graphics environment. Will continue attempting to initialize graphics environment...

    I have windows XP and Jdeveloper 10.1.3. This is a warning message I get in the JDeveloper consoile when I run my applications and this warning doesn't come everytime when I run.
    Thanks

  • Is any one else having problems converting audio books in WMA format with the new v5

    Is any one having trouble with audio books in WMA formatting converting with the new ios v5 

    Since updating to OS5 in my itouch I have lost all my library audio books. I have downloaded a couple of new library audio books. The books look like they are being loaded into my itouch but are not there. The only way I can access them is to make a playlist for each book and drag the numbered files into the playlist folder. There are a lot of problems with this method - book chapters are not in order (I have to tried to reorder them without success) and if I stop listening to a book, when it starts again it starts at the beginning of the chapter. Before OS5 I had no trouble with WMA files or anything for that matter. I hope there is a solution soon.

  • HT204266 My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

    My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

    My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

  • I have a Mac notebook and it says it's connected to wifi, but when I try to connect to any search engine it does not.  What is causing it to not actually connect.  My pc connects no problem.

    It seems that all apple products used in my house at times will not connect to our wifi.  It's hit and miss.  It says I am connected, but when you try to connect to any search engine it does not.  I have disconnected and reconnected the power to the dsl provider and to our wifi units.  I have rebooted the computers.  I have reentered the password.  Still no connection.   We do not have connectivity issues with our PC products.  Anyone have any answers for me?

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account and reseting it and it still only picks up the old messages? Anyone else having tis problem? ANy ideas how to fix it?

    My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account (a number of times..)  and setting the account back up?  and it still only picks up the old messages? Anyone else having tis problem? Any ideas how to fix it?
    This just started happening for no reason...no changes to the phone or Ipad?

    my iphone and ipad will not send or receive emails or messages for the last few days.  it is telling me that cannot connect to server

  • I want to disable or remove Game center from my iphone. It's always pop up during i play hay day game. So i can not solve this problem. Any way i try to log in game center my several Apple id account but it does' not work. I am still stuck in log in page

    I want to disable or remove Game center from my iphone. It's always pop up during i play hay day game. So i can not solve this problem. Any way i try to log in game center my several Apple id account but it does' not work. I am still stuck in log in page

    The Game Center app is pre installed and cannot be removed from the device.
    Best thing to do is move it to the last available screen.
    Hold down the Game Center app until all the apps jiggle then sliide the Game Center app to the right from one screen to the next. This requires a bit of finesse, but it's doable.
    Press the Home button one time to stop the apps from jiggling.
    For the Apple ID issue, try resetting.
    Tap Settings > General > Reset > Reset All Settings
    Then try your Apple ID and password for the Game Center app.

Maybe you are looking for