Problem creating and Installing a ringtone

I am using ITunes 11.1.3.8 on Windows 7. Following the various online instructions, I have converted my song to ACC format, dragged it so it shows as a tone in ITunes, dragged it to the desktop, and verified that it's file extension is .m4r (though contrary to expectations, I do not recall needing to change it, nor delete anything. A copy remains under Music with file extension .m4a. Also, there is no Ringtones section of ITunes that I could discover, but only Tones.) Synced with my IPhone 3GS. It does not show up on the IPhone settings as a selectable ringtone. How can I make that happen? What things might I be doing wrong? Thank You.

With the non-answers, I downloaded a free program, a file manager for iphone: 'iFunBox'. I used it to copy the ringtone to the iphone. It now works.
This solved the problem.

Similar Messages

  • Networking problem after a zone is created and installed

    Hi all,
    I've got a networking problem after a zone was created and installed on a Solaris 10 box. The box was configured with two NICs, one (e1000g0) with a public IP address, the other one (e1000g1) with a private IP address and connected to a local switch. All worked fine so far.
    Then I created a local zone with shared networking (e1000g1). The zone has a private IP address which is in the same subnet as e1000g1 on the global zone. After some time, I noticed that I could not access (ssh, ping) the global zone. Then after some time, the global zone became available. The problem happened quite frequently.
    Also I observed that: 1) When the global zone was unavailable from outside, it was available (ssh, ping) from another box within the same subnet (e1000g0); 2) If I shutdown e1000g1, the problem was gone.
    Any idea what caused this problem?
    Many thanks,
    Xiaobo

    It was a route problem.

  • How to create and install a toolbar to a browser using java

    Hi all,
    Can any one guide me about how to create and install toolbar to a browser using java ??
    please any one help me about this,i am not getting any idea about this..
    Thanks and Regards
    Sandesh S

    I doubt you can. Those browser toolbars are done by implementing to an API provided by the browser. That API, I don't believe, is provided via Java. But of course, that would be entirely up to the browser, not Java.

  • Problems downloading and installing OS X Yosemite An error occurred while running scripts from the package

    Hi! I have problems downloading and installing OS X Yosemite.
    While downloading this message pops up:
    An error occurred while running scripts from the package \U201cwct8079783343594854923.pkg\U201d.
    and in /var/log/install.log i can see:
    MacBook-Pro installd[1086]: PackageKit: Install Failed: PKG: pre-install scripts for "com.apple.pkg.InstallMacOSX"\nError Domain=PKInstallErrorDomain Code=112 UserInfo=0x100193c00 "An error occurred while running scripts from the package “wct8079783343594854923.pkg”." {\n    NSFilePath = preinstall;\n    NSLocalizedDescription = "An error occurred while running scripts from the package \U201cwct8079783343594854923.pkg\U201d.";\n    NSURL = "#InstallMacOSX.pkg -- file://localhost/Users/username/Library/Application%20Support/AppStore/91504108 2/wct8079783343594854923.pkg#Distribution";\n    PKInstallPackageIdentifier = "com.apple.pkg.InstallMacOSX";\n}
    does anyone have an idea about this?
    thank you very much

    Mucked up installation. If the installer app is still in /Applications, delete it and start over.
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.2), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • How do I create and use a ringtone without syncing and without jailbreaking?

    How do I create and use a ringtone without syncing and without jailbreaking?

    You create ringtones on your computer and sync them to your iphone.
    You can buy ringtones from the ringtones section (at the bottom of the screen when you open itunes) of the itunes app on your iphone.
    There may be apps that will do this - not sure.

  • Problem upgrading and installing virtualbox-modules

    Have some problems upgrading and installing virtualbox-modules
    [elgringo@compjotr Desktop]$ sudo pacman -S community/virtualbox-modules
    resolving dependencies...
    looking for inter-conflicts...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: lirc: requires kernel26>=2.6.26-1
    :: nvidia: requires kernel26>=2.6.26-1
    Had to uninstall lirc nvidia and virtualbox-modules before I could upgrade the kernel and now I can't install the virtualbox-modules.
    Anyone else who experienced the same problems?

    virtualbox-modules depends on the kernel in core. If you want to use the kernel in testing, you'll need to rebuild the virtualbox-modules against it.
    Virtualbox-modules will be fixed when kernel 2.6.26 will be moved in core. So you can wait if you prefer.

  • IBook G4 problems archive and install or erase and install?

    I have been having problems with my iBook G4 (it will be five years old this thanksgiving and it got a new hard drive just before the 3 year applecare ran out). I tried updating safari in may and I think that somehow screwed up my system. I can no longer use safari or open any adobe pdf files. also, when I try to run software update, it will bounce a couple of times in my dock and then disappear.
    I can still use word and firefox (although firefox has been quitting with more and more frequency recently, about 4 or 5 times a night). I ran the disc utility and the hardware test and neither of those identified any problems.
    I didn't do anything major earlier like an archive and install or reinstall because I couldn't find my copy of word in order to reinstall that, but I found it over the weekend and I am ready to try to fix my computer.
    So here is my question--should I do an archive and install or erase and reinstall? also, I have three apple install discs and five of the software restore, is that right? I don't want to get halfway through the process and realize I am missing something.
    the iBook is almost five years old, if I start all over, am I going to run into the same problem--that some of the updates won't work on my system and might cause problems?
    Thanks!

    Welcome to the Forum.
    Before that you might want to try running a repair disk routine on the HD, and clear the cache files too. Download ONYX, a free cache cleaner from here: http://www.titanium.free.fr/pgs2/english/download.html and clean the system and user files. Once this is done go to the next step.
    Booting up while holding down CMD-S. Once the screen of code has loaded and the cursor stopped moving, type in *fsck -fy* (note the space after the 'k') and hit return. Repeat until it says the HD is OK. Type reboot, hit return.
    Post back.

  • Problems downloading and installing mountain lion from the app store

    HI i have purchased the upgrade for mountain lion from snow leopard and everytime i download and install the install wizard informs that he file cannot be verified so may be corrupt. Am i doing anything wrong?

    App store download problems:
    - Sign out of the App Store (in the Store menu)
    - Quit the App Store
    - In Finder - Go>Go to folder...  (or Apple-shift-G)
    - Paste in the following "~/Library/Caches/ "
    - It will take you to a folder.  Delete com.apple.appstore
    - Launch the App Store.  Sign in and then reclick the Mountain Lion buy.  It won't charge you again.
    App Store Error 100
    App Store Error 103
    App Store Support

  • Problems booti and install Tiger on a G4 running 9.2.2 from an external DVD

    G4 PCI powermac, just a cd drive built in, running 9.2, sees external iomega dvd drive, reads dvds, cds, but when I try loading tiger from a dvd there are problems.
    I puu the tiger disc in, click on install, then get a message that startup disc cannot set this drive as the startup disc (or similar). Restarting and holding the c key doesn't work- I get blinking question mark and have to disconnect the iomega drive, put the 9.2 cd in the internal drive and restart again holding down c key to get anything. Then, running from the cd I can reset the startup disc to the hard drive. Neither can I install tiger running 9.2 from the internal cd, with the tiger DVD in the Iomega drive- it sees it, but requires that the tiger install disc be the startup drive, and we go around again if I try that.
    Q- is this possible, ie to load tiger on a PCI 400mhz powermac from an external DVD drive? has anyone done it? how?
    Thank you.
    by the way, PCI 400mhz powermac- doesn't need firmware updating, can't be put into target mode, can't boot from a firewire device (and I have tried, just in case)

    Joe, thank you very much for your post. The PCI G4 won't boot from an external USB dvd drive. Part of the apple support site says it will, another part says it won't. It won't. And it's well documented that the PCI G4 won't boot from a firewire device, neither can one put it into target mode.
    The method Joe suggests does work. I arrived at it independantly, with this method- I ran 9.2 from a CD and partitioned the internal hard drive 10GB dive, ended up with two 5GB partitions. then installed 9.2 on one partition.
    Restarted and I'm running 9.2.
    Then copied the Tiger install dvd from an external dvd rom, just a normal drag n drop copy, while running 9.2 (you can't do this under OS X) Then set the startup disc as the partition with the OS X install files on it.
    (I copied the Tiger files ontot he partition that wasn't running 9.2)
    Pressed restart, a long wait and then it sprang into life and installed OSX on the other partition, but without asking if I wanted a clean install- it just installed it alongside the 9.2 system folder.
    I had to specify no extras, it prompted for that, via a message that said free space was tight.
    All went well and it's running 10.4.4
    Problems that have arisen- 1. won't update the system. Downloads the files via software update, then says it can't use them. The update dmg files from the apple site won't work either.
    2. won't shut down properly- goes to a blue screen, then stays there- I have to unplug it every time.
    Otherwise ok.
    prior to working this out out, I visited the local apple store- no cd copies of tiger, exchange program withdrawn. Suggested I call apple. Did so, was directed to technical support. Technical support, very nice guy but knew zero about this.
    this is really a bit of fun for me, I have other macs, so no worries, but if anyone has a copy of Tiger on CD, I'd really like to borrow it.
    Thanks everyone
    Mike

  • Problems downloading and installing Adobe Reader X

    I had problems with Adobe Reader X (couldn't print pdf documents, very slow opening and sometimes didn't open) so uninstalled it from my computer to see if downloading the latest version would get rid of the issues.   I am running Windows Vista Home Basic. 
    I am unable to install Adobe Reader X - it gets to a point where it should be installed and I get an error 1303 message, telling me that I need to log in as administrator (which I am).  When I retry the installation, I keep getting the same message.  What can I do?   I have quite a number of pdf documents that I now can't even open and read.
    Many thanks in advance for any help that's there!

    You can try using this tool to remove all traces of previous version(s) of Reader:
    http://labs.adobe.com/downloads/acrobatcleaner.html
    Then, you may download the offline Reader installer from
    http://get.adobe.com/reader/enterprise/
    After downloading, restart your computer and run the installer before doing anything else.

  • Problem creating and editing contacts in iOS 5.0.1 on iPhone 4

    Just upgraded my iPhone 4 to iOS 5.0.1 and cannot create new contacts starting from my existing contacts list nor can I edit any existing contact. The "edit" icon is not there. Any reason why? Was OK before the "upgrade".

    Exact same problem. 
    I have tried restoring phone, restarting phone.  Many times....
    When I try to sync, a box comes upsaying "iTunes could not sync contacts to the iPhone because thre contacts are in use by the iPhone".  I have NOT got contacts open.  I have closed contacts AGAIN to be sure by double hitting the big button at the bottom, then closing the app by holding it down then cancelling it.
    None of these work.
    Any new ideas??

  • Problem downloading and installing cloud software

    Each time I download the cloud software, the installation gets to about 96%, and then stops and tells me that installation has failed. This is on a Windows XP (service pack 3) computer. The software installed fine on my laptop with Vista.
    Any suggestions as to what the problem might be, and how to resolve it?
    Thanks
    Colin

    Hi Crgreen,
    Thanks for the post and welcome to the forum   Sorry to hear of the issue you are facing, trying to get BT Cloud installed on your second computer.  Did you manage to sort this?  If not then please get an email off to us so we can look into this.
    Please drop me an email via the 'Contact Us' link in my profile. (click on my name and you will find the link under the "about me" section). Include your BT account details and the link to this thread.
    Cheers
    Sean
    BTCare Community Manager
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Problems creating and moving catalogs

    I'd like to keep photos, together with their catalog, on an external drive. After I move photos to the drive, I use Catalog Manager to create a new catalog on the drive, and import the photos. All goes well until I switch to another catalog on my main drive. The custom location for the newly created catalog on the external drive appears in Catalog Manager, but no catalogs appear. There is no way to switch back to the catalog I just created. I can see the catalog in the Finder, but I can't find a way to switch to it in Photoshop Elements 10. It just doesn't appear in the Custom Location list in Catalog Manager. (I've verified that there are no permissions issues with the external drive.)
    I thought I might try creating the catalog in the default location and then moving it (via Catalog Manager) to the external drive, but the Move option is grayed out for all my catalogs—current or not current. I can click on any catalog in Catalog Manager and the Move button never becomes enabled.
    I've tried repairing the catalog, but Catalog Manager reports no errors.
    What could be going on?

    Yes, the catalog opens when I double-click the file in the OS X Finder. However, the catalog still does not show in Catalog Manager.
    Given that Adobe provides the Catalog Manager functionality with the option of creating more than one catalog and switching between them, I think I shouldn't have to defend my desire to use the feature as intended. I suppose you could also say that many people recommend you use another program than Photoshop Elements to manage your photo library, so that there's never an issue of having problems with Photoshop Elements. But I want to use Elements, and I want to use the features it provides.
    Does anybody know why the catalog does not appear in Catalog Manager, and why the Move button is not enabled for any of my catalogs?

  • Problems creating and exporting Blu-ray

    On one of my first efforts at using Encore CS3 to create a Blu-ray movie I ran into some puzzling problems. I do not know if these are bugs in Encore, problems with my computer, or errors on my part in setting up the project.
    A few weeks ago I created a movie of length 2:06:21:11 using Premiere Pro CS3. At first I needed a DVD of this movie and I did not have sufficient storage to export to Encore for Blu-ray, so I exported MPEG2 video and .wav audio for DVD. I imported these assets into Encore (complete with chapter markers) and produced my DVD with no problem.
    Later, having obtained more external storage, I returned to the Premiere project and exported the movie as MPEG2 for Blu-ray, using the high-quality 1440x1080 preset. I imported this file and the associated .wav audio file into a new Encore project (I was disappointed not to find the chapter markers here) and proceeded to create menus similar to those
    from the original DVD project. Everything went fine until I checked the project and found that it exceeded the Blu-ray disc size: the projected build size was 25.61 Gb.
    Now the file sizes were as follows:
    The MPEG2 video file was listed in Windows Explorer as 23,035,133KB, which translates to about 23,588,000,000 bytes. The same file was listed in Encore as 21.9GB, which is itself a bit of a puzzle: even if the file were just under 21.95GB, rounding down to 21.9GB, this would be only about 23,569,000,000 bytes, so I would think the actual file size would have been rounded by Encore to 22.0GB. Incidentally, 7,582 seconds of video at the target bitrate of 25,000,000bps would come to about 23,694,000,000 bytes, so the 2-pass VBR was pretty close to the target.
    The .wav audio file was listed by Windows Explorer as 1,421,502KB, which comes to about 1,456,000,000 bytes. It was listed in Encore as 1.3GB -- once again, I would expect Encore to have rounded the actual file size to 1.4GB.
    In any case, the real audio plus video file sizes are just a bit too big for a 25,000,000,000-byte Blu-ray disc even if the sizes listed by Encore would just fit. So I decided to use Dolby audio at 192Kbps to reduce the audio to one-eighth of the size of the .wav file.
    First I did this by specifying a transcode preset for the audio that included Dolby, rather than leaving it set to "Don't Transcode". A check of the project still showed that it exceeded the disc capacity, and initiating the Build process STILL SHOWED A PROJECTED SIZE OF 25.61 GB -- as if the Dolby transcoding were being ignored completely.
    Next I transcoded the .wav file to see if this would change the size estimate. The transcode took some minutes (during which time no progress bar appeared in the transcoding progress panel). Finally the audio file was listed as "Transcoded", but a check STILL SHOWED 25.61 GB.
    Finally I transcoded the .wav file to Dolby stereo at 192Kbps using Vegas Platinum + DVD, replaced my original audio file with this one on the timeline, and marked it "Don't Transcode". But a check STILL SHOWED 25.61 GB. The Dolby file was listed by Windows Explorer as 177,678KB, or about 182,000,000 bytes.
    Now this certainly should have fit on a Blu-ray disc. It is slightly shorter than the third bit-budgeting example in the Encore manual, and it has no motion menus or slide shows. The video plus audio, both "Don't Transcode" assets, total about 23,770,000,000 bytes, well below the 24,500,000,000 bytes suggested in the manual to allow a "very conservative" 2% margin for overhead.
    So I figured the size projections were erroneous and I ran the build. It produced a Blu-ray folder with total size 24.6GB, which translates to 26,414,000,000 bytes, or about 1,414,000,000 too many. Looking in the Blu-ray folder, I found that the main MPEG-2 TS file (named "00000") contained 25,814,922KB, or about 26,434,000,000 bytes.
    So I ask Adobe and any expert participants in this forum for their help understanding the various problems men

    I apologize for the length of the previous post -- I had to explain a lot so that you might understand what was going on. The editor chopped off the end of my message, which was to have been:
    So I ask Adobe and any expert participants in this forum for their help understanding the various problems mentioned above, specifically:
    1. Why did the estimated file size come out so much greater than the sum of the known video and audio file sizes?
    2. Why did the estimated file size not change as PCM audio was replaced with Dolby?
    3. Why did the actual build file size come out so much different from the estimate?
    4. Is Adobe's stated "very conservative" margin of 2% in fact too small for Blu-ray?
    5. Why was there no progress bar when transcoding .wav audio to Dolby?
    6. Why did no chapter markers come over into Encore in the MPEG-2 Blu-ray file?
    7. Why were the file sizes in the Project panel of Encore, for the two "large" files, slightly smaller than they should have been?
    Please excuse the length of this post, and thanks in advance for any help in solving these problems. I can certainly work
    around them by encoding to a lower bitrate but I would prefer to address them directly.
    Dick Vaughan

  • Problem creating and embedding FLV

    My FLV isn't showing up on the web page. I also can't see
    that Flash generated SWF files in addition to the FLV when I
    created it using Flas > Import > Import Video.
    http://www.ltcproduction.com/creative_flv.html
    the code I have is this:
    <script type="text/javascript">
    AC_FL_RunContent( 'codebase',''
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0','widt h','32','height','32','title','Little
    girl','src','little_girl.flv','quality','high','pluginspage','
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movi e','little_girl.flv'
    ); //end AC code
    </script>
    <noscript>
    <object
    classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0"
    width="32" height="32" title="Little girl">
    <param name="movie" value="little_girl.flv">
    <param name="quality" value="high">
    <embed src="little_girl.flv" quality="high" pluginspage="
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
    type="application/x-shockwave-flash" width="32"
    height="32"></embed>
    </object></noscript>

    > My FLV isn't showing up on the web page. I also can't
    see that Flash
    > generated
    > SWF files in addition to the FLV when I created it using
    Flas > Import >
    > Import
    > Video.
    >
    >
    http://www.ltcproduction.com/creative_flv.html
    FLV files need an embedded player. I would heartily recommend
    Wimpy Wasp
    which I've used extensively without a glitch
    http://www.wimpyplayer.com/products/wimpy_wasp.html
    If your site is hosted on a Windows 2003 server, then the
    server has to be
    configured to recognize FLV as a mime type. It may be that
    your server
    hasn't been configured in this way. Unless you're running
    your own server,
    this isn't a DIY job and you'll have to contact your host.
    Some hosts are not helpful and will tell you they can't do
    this or they
    don't offer 'streaming media' as part of their hosting plan.
    I got around
    that problem uploading my FLVs to a friend's server who uses
    a Linux server
    and using absolute links to channel the FLVs through my
    domain. This problem
    does not affect Linux servers.

Maybe you are looking for