Problem creating Bootable Windows 10 USB drive with Bootcamp 5.1

Hi all,
I have read quite a number of threads (here and elsewhere on the internet) with problems creating a Bootable USB installation for Windows 10 on OSX Mavericks.    The usual response is "make sure your .ISO is unmounted".    With that being said, it appears that for most users on OSX Mavericks, this alone does not fix the issue.
The specific error I get is:
"Boot Camp only supports Windows 7 or later installation on this platform. Please use an ISO file for Windows 7 or later installation."
As mentioned I have double checked that the ISO is not mounted.    Anyone happen to have any solutions?    Also, would creating a bootable drive from a windows machine still work with my Mac the same way it would if it was created with bootcamp?
System specs are:     OSX 10.9 Mavericks, Early 2011 Macbook Pro, (MacBookPro8,3).
Cheers,
Jonathan

W10 is not officially supported. BC Assistant checks available software signatures on ISO images to verify that it can be used. This checking is not always 100% fool-proof, though. You are using a 2011 MBP, which is also a factor in this. One option you can try is to install an evaluation version of W8+ and then upgrade to W10. The upgrade does not require BC Assistant, once Windows is fully installed.

Similar Messages

Can't create a Windows Seven USB drive using Bootcamp

Hi! I ve been trying to create a Windows Seven bootable USB drive using the Bootcamp Assistant. I tried to create it using an ISO of my Windows DVD in order to install it on my new Mac Mini. My problem is that I get an error: Your bootable USB drive could not be created, an error occurred while copying the windows installation files. My USB drive is 8G, and I‘ve tried with a 100G external HDD too... So it‘s not a size problem. I also tried to format the drive different ways without any success... I found lots of threads relating to this problem but none of them had a solution. Any clues? Thanks in advance!

You can create a bootable usb via bootcamp

Can I install windows 8.1 from windows ssd hard drive with bootcamp?

I recently bought a 2009 macbook pro wiht Maverick 10.9. I had a PC running W8.1 on a crucial ssd. The ssd is working fine, it was the motherboard that was broken. I was wondering if I could image a partition on the macbook with the image software crucial provided to install W8.
Any input can help
Thanks

Instead of trying to copy the Windows copy you have on the SSD to the internal hard drive, what I would do is to buy a USB to SATA hard drive and connect the SSD to the Mac through the USB port, and then start up your Mac from it if you need to use Windows 8.1. To do it, hold the Option (Alt) key while your Mac is starting up.
Apple does not support Windows 8 on the 2009 MacBook Pro, so you may have some problems with the trackpad and function keys

Cannot mount external USB drive with FDisk_partition_scheme

Due to some recent mac issues in my lab, we updated one of the computers to Maverick 10.9.4 from Snow Leopard 10.6.8 yesterday. Anyhow, this seems to have erased the ability of the mac to read or mount several identical USB drives with the NTFS format (WD My Passport Ultra 500GB USB3.0). It could do it yesterday when it was OSX 10.6.8, but not today (OSX 10.9.4). The drives still work fine on other OSX 10.6.8, Windows 8.1 and Ubuntu 14.04 computers (this is appears to be a problem with the Maverick 10.9.4 operating system itself, rather than the flash drives which work flawlessly with every other computer I've tried). I want to remove data from the computer to create backups on the USB drives (no, I don't want to create an online backup or buy a new set of USB drives).
diskutil can see the drives, but cannot verify or repair them as they lack a GUID (GPT) partition scheme. I'm assuming this is the root of the problem. Manually mounting the drives does not work. Installing the ntfs-3g driver also did not work (I was using this to write to the NTFS drives until we upgraded OS's). Installing the WD Passport drivers for OSX also did not work. How do I get the mac to mount these drives?
I could reformat one USB drive and then copy to the others, but this would be extremely inconvenient and take days of copying files back and forth (and would prefer to fix the mac rather than go through this with every NTFS drive I own). If I did this, the FAT32 hard drive format would not be suitable, as format is unable to handle the extremely large sequencing datasets I need to transfer. I'm not super familiar with hard drive formats, but in the event we cannot get Maverick to actually work could someone possibly suggest a format able to handle large file sizes (the largest file I need to move is ~60GB) and be compatible with Windows 8.1 / OSX 10.9.4 / Ubuntu 14.04 as well?
Another workaround I thought of would be just to install an Ubuntu partition on the mac and get the files off through the Linux install. Which is also inconvenient, but would probably be faster than trying to reformat the drives and copy everything over onto them again given the amount of data I want to transfer.
Unrelated, but is there any way to view files and folders in the OSX root directory besides through Terminal? It seems like this functionality was also removed when we "upgraded" from Snow Leopard. (At this point, if it were up to me I would wipe all of the macs we own and replace them with Ubuntu... even the most minor of tasks always require some sort of workaround with them... at my wits end here ).

Yeah this definitely appears to be a problem specifically with this mac. It's been having all sorts of weird problems lately, and we figured that upgrading to Maverick might fix them (but instead we got new problems).
To give an update on this, I ended up reformatting one of the drives to HFS+ and disabled journaling. It now recognizes the drive again, and I'm pulling the files off that way. I looked at exFAT, but it looks like HFS+ has much better Linux support (Windows is read-only but that's only a minor annoyance, as the algorithms to process the data only run on UNIX machines anyways). It's a shame I couldn't keep using NTFS (had to copy over literally EVERYTHING again...) but whatever. Again, no solution for the issue (where this mac can't read NTFS drives).
@rkaufmann87 - To give a bit more explanation, we recently had to disable online backups because apparently the sheer amount of data causes Time Machine to freeze the computer and fail every time it has a scheduled backup (original issue we thought that upgrading to Maverick would solve... didn't work). The hard drive has been having a lot of issues when it begins to reach max capacity as well. So I am pulling off all of my files to external hard drives and deleting the local copy before we attempt to back up online again. And the data would probably take me a year and a lot of money to recreate (for the curious, it's high throughput sequencing data). I'm choosing not to take any chances as a result.

How to create a system recovery USB drive?

My U845-S406 crashes every 15 minutes with a BSOD referencing iastor.sys.
Multiple diagnostics say it is all good.
Multiple virus softwares say it is clean.
It crashes even quicker in safe mode.
I have the latest Toshiba raid drivers, but updated to a more recent Intel set. The error changes to iastora.sys, and goes back to iastor.sys when I switch back to the Toshiba drivers.
I booted holding down 0, and told it to restore; but it promptly crashes.
I made a W7 disk and tried to load it, but it promptly crashes.
As a last resort before throwing the computer out, I want to create a system recovery USB drive, format the harddrive and try recovering from the USB; but I don't have the Toshiba Recovery Media Creator (or any Toshiba software at all...) I downloaded a copy and ran it, but it says I don't have a HDD Recovery Area.
I know I have one because 1) I can access it by hold down 0, and 2)Partition Wizard showes it.
So, how can I create a system recover USB drive (or make Recovery Media Creator find the HDD recovery Area...)
Interestingly, the other day it spent 90 minutes installing a W7 update without a problem, but crashed immediately when done. Maybe that means something.

Satellite U845-S406
Downloads here.
Please zip up a few of the corresponding *.dmp files from the C:\Windows\Minidump folder and attach them to your reply.
So the procedure in the section Creating recovery media (p. 53 in the User's Guide) doesn't work? Exactly where does it go wrong?
Satellite/Satellite Pro U800W Series User’s Guide
-Jerry

How to Create a Windows 7 USB install disk

If you want to install Windows from a USB drive, you'll need the Boot Camp Assistant (version 4.0.1) and a MacBook Air. I don't know why it won't let you do it on other Macs and MacBooks (the option still shows up, only it's greyed out) - if you made it work on anything other than a MacBook Air, let me know how you did it. So, besides that, you also need an empty USB drive and a genuine Windows ISO file.
However, if in your case the Windows USB creation option is greyed out, this is what you can do:
You create the Windows installation USB, using one of these two ways (I used the first one):
http://technet.microsoft.com/en-us/magazine/dd535816.aspx
http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
You create the Windows partition with BCA.
In System Settings, you choose the newly created BOOTCAMP partition as the startup disk and restart your Mac.
Have your Windows USB inserted before your Mac restarts.
As soon as your Mac boots from the BOOTCAMP partition, it should start loading Windows Setup from the USB drive.
I have an early 2009 MacBook and these steps worked for me. It's a workaround... but it works. Let me know if it worked for you.
* If none of this works for you, there is another workaround, using 3rd party software (rEFIt). However, I don't recommend using it, unless you know what you're doing.
* Disclaimer - This info comes as is and I do not guarantee that it will work for you. Nor do I guarantee that it will not cause any malfunction to occur on your Mac computer.

you restart your mac and as soon as it boots up (usually you hear the dvd making a noise, or the gong sound), you hold down the Alt key until you see a screen that shows you all the partitions/drives you can boot from. you select the boot camp one, while the windows usb installation disk is inserted and it should boot up from the usb. it worked for me, but I can't guarantee it will work for you too... depending on your model. mine is an early-2009 macbook.

HT1948 USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

OS X installers have always been fairly specific, hardware-wise. I haven't read anything reflecting that situation with the Recovery HD, so it may be that the Recovery HD created for the MacBook Pro does not have the necessary drivers for the Mac Pro. Obviously, nothing definitive here, but a possibility.

HT4407 When installing Windows 7 using Bootcamp, I get message: "Need 64-bit Windows Installation USB drive or DVD." I thought my install disk was for 32 or 64 bit. What does this mean?

When Installing Windows 7 using Bootcamp, I get message: "Need 64 bit Windows installation USB drive or DVD." What does this mean?

It means you need the 64 bit Version of Windows on a USB stick or DVD.

Attempting to install Windows 7 from USB drive keep receiving "No Bootable device -- insert boot disk and press any key" usb drive with windows 7 iso is inserted

As the topic says, i am trying to install windows from a usb drive, when i click install windows and the computer reboots to install a black screen comes up with "no bootable device -- insert boot disk and press any key" the USB drive is inserted and pressing any key does nothing. Help?

You need to follow these guides to install from USB drive
http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed -100-working-guide/
good luck

Random crashes when using USB drive with Creatie Suite

I have a 24" Intel IMAC and when using a SanDisk Cruzer Titanium 2GB and Creative Suite I eperience random crashes in CS. When I remove th drive it works fine, any known issues when using Rosetta apps and USB drives?
thanks

So a guy goes into his doctors office and tells his doctor "Ya gotta
help me doc...it hurts when I run my head into the door like
this...OW!". Then the doctor says:
"DON'T DO THAT ANY MORE!!!"
(I promise to keep my day job...oops what job...and not go into
comedy..)
Why don't you convert all the old 16 bit code into 32 bit code and
create one application where the various parts all know about each
other? I don't think that there's any way to coordinate an old 16 bit
LV and a new 32 bit LV application so that they don't step on each
other driverwise like they appear to be doing. I don't think that the
two LabVIEW's even know that the other exists!
Alternatively, get a second computer to run the 16 bit code on and
make the two apps communicate with
each other using TCP/IP or serial.
Doug De Clue
[email protected]
cincidude wrote in message news:<[email protected]>...
> I am using 2 versions of Labview at the same time, one is version 4
> which has a camera and a weigh-in-motion scale attached to it. The
> second is either Labview version 4, 16-bit or Labview 3.0.1, 16-bit,
> i'm not sure. The sixteen bit has a data acquisition system attached
> to it. Its an optim electronics system and the 16-bit Labview drivers
> for the optim were provided by Optim electronics and so I am stuck
> with using the same system. When I use both these systems in tandem,
> the system crashes frequently, but both systems run fine
> independently. It usually just freezes up or says "Illegal operation
> performed. Contact program vendor". Its a windows error with a red
> cross.

Mapping usb drive with rdesktop to windows server/XP

I have read that the -r option with rdesktop allows you to map a local usb drive on a linux pc to a windows server or XP as follows:
rdesktop -r disk:usb=<path> <ipaddress>
I have arch installed with a base gnome so that usb drives are automatically mounted and unmounted when plugged in.
Locally I have made sure that the usb is being mounted properly.
But when I rdesktop into the windows pc and open windows explorer the usb drive appears as a network drive in the left window but no files appear in the right hand window.
Windows gives me a message that the resource is unavailable. Mu usb is formatted in FAT.
This occurs whether I use the dev address (/dev/sda1) for my usb drive or the mounted address (/media/usbstick) in the -r option.
Can anyone tell me why I am not seeing any files in windows on my usb stick?

There are a number of posts related to copying issues between Windows Vista / 7 and AirPort Disks. Two potential solutions being forwarded are: 1) Changing the LAN Manager authentication level, and/or 2) Disabling the Windows Search feature.
To change the LAN Manager authentication level:
From the Windows Vista / 7 desktop, click Start
Search for: security
Click 'Local Security Policy'
Goto Local Policies > Security Options
Under Policy, double-click 'Network security: LAN Manager authentication level'
Change level to: Send LM & NTLM responses
Under Policy, double-click 'Network security: Minimum session security for NTLM SSP based (including RPC) clients'
De-select 'Require 128-bit encryption'
Click OK
To disable Windows Search:
Start > Control Panel > Programs > Programs & Features
On the right-hand side, click "Turn Windows features on/off"
Scroll down, and de-select "Windows Search".
Press OK, close all windows and restart.
A third "solution," that has worked for me, is verify that both the AirPort base station and the Win7 PC are using the exact same Workgroup Name. In my case, I use "WORKGROUP" (without the quote marks) for this name. From the AirPort Utility, you would enter this value on the Disks > File Sharing tab. On Win7, Start > Control Panel > System and Security > System > Change Settings > Change > Workgroup

No EFI Boot option from Boot Camp-created Windows 7 USB drive?

I can't get an EFI boot option from my Win7 USB thumb drive. Previously I had been running Mavericks, and with that I was able to select either the BIOS option of the installer ("Windows" under the ALT screen) OR "EFI Boot", but now I'm only getting the bios install option.
Does anyone know the trick to installing Windows with UEFI on my late 2013 rMBP?

I have W8.1 installed under EFI on a late 2013 rMBP. Can you check your USB drive? Is it a USB2 drive?
The structure should similar to the following, and you can see the EFI files. You can try an SMC reset - Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support and check if it changes the behavior.

I have a MacBook Pro 2006 and installed Windows 7 on it with BootCamp no problem, but the thing is on Windows, there is no sound.

Hello there everybody! I have installed Windows 7 on my MacBook Pro 2006 15' without any problems, and without any modification. I did hear that some users couldn't install it, but I have got it working fine with BootCamp 4.0.1 on Lion. So anyways, when I boot into Windows, there is no soudn, and there is also a Red Light coming from the Earphone/Headphone jack.
What should I do? This problem is really ticking me off because I only insalled Windows to lay some games my friend recommended to me. With no sound, it would be really strange playing them, especially Mass Effect.

Well I / we always kind of assume that someone did all the normal basics first and is still having trouble. And read the instructions in Boot Camp Assistant.
For reference purpose to anyone
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 4.0, OS X Lion: Frequently asked question http://support.apple.com/kb/HT4818 http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
Installation Guide
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/

IPod Nano, Windows, and USB driver quirkiness question

Hey all,
I recently helped someone who was suffering from two separate, show-stopping iPod/iTunes problems to get things into such a state that they could actually make use of both. Things seem to be working fine, though one of our solutions seems to me to be a bit less than optimal.
For the sake of providing as much information as possible, the first problem (though likely unrelated) was the infamous vanishing iTunes installation. We solved this by using the ctrl-alt-delete trick on an iTunes 4.9 installation (that is, by ending all of the install processes when the installation-ending error message shows up.) Okay, that's not the best solution, but it seems to be all that we can do for now.
The main concern, however, is with the iPod USB driver, and a problem that began with the formatting of the iPod. I can see that at least a few people have had this problem, but here it is for the sake of it:
The iPod installation software would state that the iPod needed to be formated, and then proceed to sit for a very long time, "waiting for iPod," until it would eventually fail. We solved this using the second technique (uninstalling the iPod USB driver) outlined by Paul Green7 in this thread: William Brame, "Initial formatting of iPod Nano", 02:49pm Sep 22, 2005 CDT
After doing this, we ran the iPod setup software again, and it told us that the iPod didn't need to be formatted. Obviously this was rather confusing, but upon loading up iTunes, it proved to be true. It appeared as an actual drive in My Computer, and it showed up properly as a 4gb iPod which songs could be copied to without a hitch.
That is, until the computer was rebooted. After a reboot, the iPod would only be recognized once again as a "USB Mass Storage Device," would not appear in My Computer, and indeed iTunes failed to recognize it as anything other than a 360gb storage device of some unknown sort.
So, what we found was that every time the computer was rebooted, the driver needed to be uninstalled again, and when Windows booted again the iPod would be properly recognized.
Now, as I said, this leaves things in a working, if far less than ideal, state. Can anyone think of a more proper fix for this? It seems to me that we've only partially addressed the problem here, and I can't help but think that this may not be the best state to leave things in.
Also, if nothing else, is there any possibility of ill effects resulting from our currently-employed solution? As far as I can tell, the worst thing about it is that it's merely bothersome, but then, I've had difficult understanding these problems in the first place.
That said, if anyone can offer any advice, it would be greatly appreciated!

The key to your problem is more than likely the 360GB storage device. This is a symptom of having either network drives or an external hard drive attached to your computer, and Windows confusing them with the iPod. The solution is to reassign the iPod's drive letter. See this:
Strange iPod behavior

Can you really not use a windows-formatted hard drive with Time Machine?

I still have people in my household that think Windows is the way to go, and so they have used all the hard drives to back up their stuff.
There is still a reasonable amount of room on one of the hard drives for me to do a Time Machine backup, however it is obviously formatted to Windows.
Is there ANY way the hard drive can be used with both systems?
It's a bit of a bummer if I have to shell out for a new one just for my MacBook!
Thanks

Do you mean you want to connect a USB drive to the TC? If so, it will recognize a disk formatted in FAT32, but not ExFAT or NTFS.
If you mean you want a Windoze-like partition on the TC's internal HD, that's a bit trickier, since it can't be partitioned. But you could create a disk image on it via Disk Utility, formatted MS-DOS (FAT) aka FAT32, or ExFAT (I'm not entirely sure if ExFAT would work in a disk image there, but it might.)

Problem creating Bootable Windows 10 USB drive with Bootcamp 5.1

Similar Messages

Maybe you are looking for