Problem creating PD infotype

Initially I tried creating PD infotype by creating the structure HRI9005 and then going to PPCI to create custom infotype. Due to some reason , I had to delete all objects from the requests . When I tried to create it the next time , it is throwing me error messages as Structure p9005 does not exist, table hrp9005 does not exist . Is it something to do with my previous deletions . Any suggesions to overcome this problem would be highly appreciated

use this link:
http://help.sap.com/saphelp_erp2005/helpdata/de/b7/0feb34bf03c210e10000009b38f83b/frameset.htm

Similar Messages

Problem in creating HR Infotype

Dear All,
I am creating a infotype for HR module this is for CTC. My requirement is that what the changes made in infotype 0008 are also reflect in my infotype. e.g. in if there are 5 chages is made for employee in 0008 infotype also reflect in my infotype. how i made this in my infotype. the change date end date is also taken from the 0008 infotype.
So my requirement is all the data coming from 0008 than some addition field adding in MY infotype in case of CTC . so give me some logic how i made this.
Regards,
Pankaj Vashista

Dear Bala,
I am not now how the dynamic action create. Is this fulfill my requirement .
Is By writting dynamic action my infotype is also updated ???????
Please any one solve my promlem.
Thanks in advance
Regards,
Pankaj

Problem Regarding Creating OM Infotype

Hi Experts
Very good morning ,,,,, n happy new year....
i would like to create one OM infotype .i have found some
threats in forum unable to get result. initially i have created
HRI9*** structure in Se11 then in PPCJ tried to create new
infotype but there is log for not creation of infotype and
that process stops right there only.kindly give me the
systematic step for the same.
Thanks
Nishita

Hi experts....
There is no authorisation issue as such...i have just created HRI**** structure in SE11 and
then finally went to the PPCJ for creating it showing following errors.
Table HRP9012 does not exist
HRP9012 not created in the database
Database index XXXX not created
Module pool MP901200 does not exist
Include MP901220 does not exist
Include MP9012BI does not exist
Screen 1000 does not exist
Screen 2000 does not exist
Screen 3000 does not exist
User interface for MP901200 does not exist
T778T: no table entries exist
T777T: no table entries exist
T777D: no table entries exist
T77ID: no table entries exist
T777I: no table entries exist
T777Z: no table entries exist
T77OA: no table entries exist
T777M: no table entries exist
T778U: no table entries exist
T777U: no table entries exist
T77NI: no table entries exist
OBJECT PDST: no table entries exist
OBJECT PDWS: no table entries exist
Dialog module RH_INFOTYP_9012 does not exist
R3TR TABL HRP9012 does not exist
R3TR PROG MP9012BI does not exist
R3TR DIAL RH_INFOTYP_9012 does not exist
kindly know me the systematic procesure to create OM Infotype.

Problems creating hrp1000/1001 infotypes with HR function RH_INSERT_INFTY

Hi,
I'm trying to use fm RH_INSERT_INFTY in an rfc to create Personnel Planning infotypes 1000 and 1001. (I.e. to create a position.) They are linked, so I've tried creating using update type (vtask) of 'D' (Dialog) as well as 'B' (Buffer update) to just update the buffer with the 1000 and 1001 before applying the update. Whichever way I try I get the error "Creation of object ID 00000000 is not allowed" when I call fm RH_INSERT_INFTY.
Any ideas what I'm doing wrong please.
Can you create an infotype 1000 and 1001 in one call to the fm ? Or do you have to call it twice, once for each infotype ?
Thanks,
Craig.

Hi Craig
To create an HR object, try the FM "RH_CREATE_OBJECT". To create relation data you can use "RH_INSERT_INFTY_1001".
Or you can make use of the HR BAPI written for this.
For HR objects (comprising also PD) you can use the Business Object "HRMasterDataReplica". It has a class method as "SaveReplicaMultiple" where you can pass your data to the interface.
You fill "BAPIHROBJ" and "BAPIHRINF" mainly and other infotype-related parameters. e.g. for infotype 1000 "PdObject" (structure like p1000) and for 1001 "PdObjectRelationships" (structure like p1001).
These are BO names, you can use the transaction code "BAPI" for more information.
The BAPI for this method is discussed also at BAPI_HRMASTER_SAVE_REPL_MULT.
And as a last thing, let me introduce you the SDN forums pointing system: You can assign points to posts you find helpful while solving your question. You can reward points by clicking the yellow star icon at header of each reply post. You can reward;
- one 10 points (solved)
- two 6 points (very helpful answer)
- many 2 points (helpful answer)
Kind Regards...
*--Serdar

How to create an infotype in sap ecc6.0 ?

Hi all,
I know i how to create an infotype in sap 4.7, but i am facing the problem while
creating an infotype in sap ecc6.0 version. could u plz provide me the info with screen shots how to create an infotype and how to enhace that infotype ?
Waiting for u r response.
Regards,
Ravi

Hi ,
To create OM infotype:
1. Go to SE11 and create a structure HRI9XXX (9XXX --> name of the infotype). Add the required fields to this structure and save and activate. then come out of it.
2. Go to PPCI and enter Infotype number (9XXX) and description.
3. Click create.
4. In the infotype category select details for the infotype.
5. Click create button. It should create the infotype.
6. Click on Check. A window with menu will open.
7. In that window navigate to Table Entries.
8. Under table Entries, select T777I and click on change.
9. It opens SM30. Click on Maintain.
10. Select the infotype and add information for "Time Constraint" and "Infotype Per Object Type".
11. Save.
12. Go back to check menu, see if all entries exist. Do not worry last 5 table entries. And you are done

Error while creating pd infotype

Hi friends,
I am creating PD infotype which is having same structure as 1002.here i copied module pool program of 1002 to my infotype and there i made changes to fields.when i am running it in pp02 transaction it is giving runtime error create_data_unknown_type.this exception is coming from module 'initialize_dyn_tab' which is in the PAI of screen no 2000.will any one pls help on this issue.
Thanks,
kumar.

Hi Chandra,
Actually, you don't need to. System should create it.
If you have problems though, you can refer to the article below which expains a more detailed solution of creating a PD infotype:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c03ec8d4-71c9-2d10-e1b9-b3142180f094
Regards,
Dilek

Problem in custom infotype module pool

Hi experts,
I have created custom infotype using PM01 where i am showing fields Basic and HRA. When I enter the value for Basic, automatically the calculation for HRa should be done depending on formula. Also, the HRA fields should be only output field. When I do the changes in the module pool PBO and regenerate the object , the changes I made get disappered. Do I have to create Z of the includes. If so, how to assign it to the infotype? Please help me to solve this problem since its urgent.
Thanks in advance.
Proper solution would be rewarded.
Ujjwala

C
This is the flavour of Infotype.
When you regenerate the Infotype, you are again reassigning the Chanrecterstcis of your Infotype. so the Existing will get regenerated with the Standard Code.
To avoid this what I suggest you is.
After finishing the Regeneration then edit the Module pool of the Infotype basically Screen 200 then add your code and Activate it there itself. Hope you got it.
If you again Regenerate it you loose your Code.
If you have further Questions please let me know.

Problem in custom infotype.

Hi friends,
I have two problem on creating custom infotype 9010.
The infotype has 4 field:
docu_type -> subtype field
Docu_number
cost -> DE:WAERS
cost_curr -> DT: Curr length 10 dec 2
I referred the cost to the cost_curr field of the infotype 9010
First Problem
The infotype is created but when I tried to enter the cost via pa30
put 50 on it, and press enter, 50 will be changed into 5000. But when I re-enter again, the ammount remained unchanged.
2nd Problem.
For the infotype i need to give a further information on the screen.
Such as that, it looks like the screen on IT0022 where when you put the educational establishment, the text of the subtype appears beside it. How do I suppose to do things like that with my infotype so that when I enter 4 as the subtype field, the subtype text appears.
Thanks

prob 1 .
what is the reference field u have given for the currency of ur 9010 table .. just check the reference field u have given for currency ..
how are u handling this in the pai part of the code , can u just make the field pass to a char field and then reassign it to the screen field .. for primary investigation.
prob 2.
u need to maintain a field just adjacent field in the layout as ouput field only . and populate this field with the suitable text once u enter the subtype field which is input field .
this u need to do in the pai part of the infotype mp901000 code ..
if p-styp is not initial .. "subtype is present fire the text part .
populate text to screen field p9010-stxt.
endif.

Help Creating OM Infotype

Hi Experts,
I've some doubts while creating OM infotype. I've been reading this manual http://www.sappro.com/downloads/jan07/OMinfotypes.pdf
but, when I try to create the HRIXXX structure and save it I received an error from the package "Customer Object TABL HIRXXX cannot be assigned to package XXXX"
Can anybody help me? I'm not quite sure if this is problem for the package or for the table's naming convention. Please, can anybody tell me if the documents is still correct?
Thanks in advance,
Regards,
Rebeca

Hi Rebeca,
Is the name of the table HIRXXX or HRIXXXX - Should be the later one.
Please also refer to my article on PD Infotype creation :
http://www.sdn.sap.com/irj/scn/articles-erp-all?startindex=81
Regards,
Dilek

Creating an infotype composed of standard infotypes parts

Hello all,
My purpose is to created an infotype to gather several fields of some standard infotypes.
In order to do this, I started to create a new infotype 9000 copying one of the infotypes whose fields where needed in the new one.
Now I just want to add my new infotype some fields belonging to another ifp. Is it possible to add a part of a standard ifp to my new one or do I have to add my fields one by one ?
Thanks everyone,
Sylvain

Hi Sylvain
Let me draw what I see. Do you want to maintain e.g. persg, pesk from IT0001, vorna, nachn from IT0002, stras from IT0006 together from another customer infotype?
If so, generating an infotype will not have much for this. Because it will bring lots of integration problems (think of validity periods).
Regarding your proposal:
P9000 has following fields:
persg
persk
vorna
nachn
stras.
Then do not expect that it can maintain data of PA0001, PA0002 and PA0006. It will just maintain PA9000 unless you code more functionality which more or less is dialog programming. If you want just PA9000 to be filled, then you will lose many functionalities of HR system.
Since IT9000 is your own infotype, why do you need to append a customer include? If it is eligible, you can prefer appending CIs to standard infotypes.
Regards
*--Serdar <a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk%2bsag%2bjiw%3d">[ BC ]</a>

About to use HR_INFOTYPE_OPERATION to create customer infotype issue:

hi
i want to create infotype use function(HR_INFOTYPE_OPERATION).
this infotype is customer infotype.
the first scenario is:
i'm be sure no data about one employee in this infotype(9004).
to call with data upload function and put data into internal table IT_PA9004.
and the table data as follow:
one line: it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 50 (customer field).
two line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 60 (customer field).
three line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 70 (customer field).
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
i run the programme and get information is:
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
but i use the transation PA30 to view all data:
in database just exist one row:
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
the second scenario is:
in database the infotype have exist one row:
           pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
           pa9004-begda = '20080318' , pa9004-endda = '20080318'
           pa9004-zzvalue = X (customer field).
and i create another row:
line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
          it_pa9004-begda = '20080318' , it_pa9004-endda = '99991231'
          it_pa9004-zzvalue = 80 (customer field)
i run the programme and get information is:
11022887 insert ok.
the three scenario is:
    set HR_INFOTYPE_OPERATION of import parameter operation = 'MOD'
    in any scenario will get error :not exist subtype .
what heppend about HR_INFOTYPE_OPERATION working,i had to use this function to
   create other infotype of SAP owner.
   and will create successfully.
so i thank it may be config Constraints about customer infotype.
is time Constraints effect?
so i want to how to check it?
and if i want to create one infotype for customer using PM01 what some thing
must be taken into account.
think you advance.
partial source code as follow:
FORM ACTION_INSERT .
DATA: P_FLAG TYPE C.
DATA: WA_LOG LIKE LINE OF DATA_LOG.
DATA: PP_ACTION TYPE PSPAR-ACTIO.
LOOP AT IT_PA9004.
    CLEAR P_FLAG.
    CALL FUNCTION 'HR_PSBUFFER_INITIALIZE'.
    PERFORM lock_employee USING IT_PA9004-pernr CHANGING P_FLAG.
    PP_ACTION = IT_PA9004-ACTION.
    PERFORM HR_INFOTYPE_OPERATION USING IT_PA9004 PP_ACTION CHANGING P_FLAG.
    IF P_FLAG IS INITIAL.
      if test_run = space.
        COMMIT WORK.
      else.
        ROLLBACK WORK.
      endif.
      write:/ it_pa9004-pernr,'insert ok'.
    ELSE.
      ROLLBACK WORK.
      write:/ it_pa9004-pernr,'error'.
    ENDIF.
    PERFORM unlock_employee USING IT_PA9004-pernr .
ENDLOOP.
ENDFORM.                    " ACTION_INSERT
FORM LOCK_EMPLOYEE USING    P_PERNR
                    CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
CLEAR P_RETURN.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
    EXPORTING
      number = P_PERNR
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
CALL FUNCTION 'HR_INITIALIZE_BUFFER'
    EXPORTING
      pernr = P_PERNR.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '1'.
ENDIF.
ENDFORM.                    " LOCK_EMPLOYEE
FORM HR_INFOTYPE_OPERATION USING    P_PA9004 LIKE IT_PA9004
                                     P_ACTION type PSPAR-ACTIO
                            CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
DATA: bapipakey type bapipakey,
        P_SUBTY TYPE P9004-SUBTY,
        PP_9004 TYPE TABLE OF P9004 WITH HEADER LINE.
CLEAR P_RETURN.
REFRESH PP_9004.
MOVE-CORRESPONDING P_PA9004 TO PP_9004.
IF P_ACTION = 'INS'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
IF P_ACTION = 'MOD'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
APPEND PP_9004.
P_SUBTY = P_LGART.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
    EXPORTING
      infty         = '9004'
     subtype       = 'FQ03'
      subtype       = P_SUBTY
      number        = PP_9004-pernr
      validityend   = PP_9004-ENDDA
      validitybegin = PP_9004-begda
     RECORDNUMBER = pp_9004-seqnr
      record        = PP_9004
       operation     = 'INS'
     operation     = P_ACTION
      nocommit      = 'X'
    IMPORTING
      return        = P_RETURN
      key           = bapipakey
    EXCEPTIONS
      OTHERS        = 0.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '9'.
ENDIF.
ENDFORM.                    " HR_INFOTYPE_OPERATION
FORM UNLOCK_EMPLOYEE USING    P_PERNR.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
    EXPORTING
      number = p_pernr
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
ENDFORM.                    " UNLOCK_EMPLOYEE

hi
i want to create infotype use function(HR_INFOTYPE_OPERATION).
this infotype is customer infotype.
the first scenario is:
i'm be sure no data about one employee in this infotype(9004).
to call with data upload function and put data into internal table IT_PA9004.
and the table data as follow:
one line: it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 50 (customer field).
two line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 60 (customer field).
three line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 70 (customer field).
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
i run the programme and get information is:
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
but i use the transation PA30 to view all data:
in database just exist one row:
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
the second scenario is:
in database the infotype have exist one row:
           pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
           pa9004-begda = '20080318' , pa9004-endda = '20080318'
           pa9004-zzvalue = X (customer field).
and i create another row:
line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
          it_pa9004-begda = '20080318' , it_pa9004-endda = '99991231'
          it_pa9004-zzvalue = 80 (customer field)
i run the programme and get information is:
11022887 insert ok.
but in database just exist the first data
           pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
           pa9004-begda = '20080318' , pa9004-endda = '20080318'
           pa9004-zzvalue = X (customer field).
the three scenario is:
    set HR_INFOTYPE_OPERATION of import parameter operation = 'MOD'
    in any scenario will get error :not exist subtype .
what heppend about HR_INFOTYPE_OPERATION working,i had to use this function to
   create other infotype of SAP owner.
   and will create successfully.
so i thank it may be config Constraints about customer infotype.
is time Constraints effect?
so i want to how to check it?
and if i want to create one infotype for customer using PM01 what some thing
must be taken into account.
think you advance.
partial source code as follow:
FORM ACTION_INSERT .
DATA: P_FLAG TYPE C.
DATA: WA_LOG LIKE LINE OF DATA_LOG.
DATA: PP_ACTION TYPE PSPAR-ACTIO.
LOOP AT IT_PA9004.
    CLEAR P_FLAG.
    CALL FUNCTION 'HR_PSBUFFER_INITIALIZE'.
    PERFORM lock_employee USING IT_PA9004-pernr CHANGING P_FLAG.
    PP_ACTION = IT_PA9004-ACTION.
    PERFORM HR_INFOTYPE_OPERATION USING IT_PA9004 PP_ACTION CHANGING P_FLAG.
    IF P_FLAG IS INITIAL.
      if test_run = space.
        COMMIT WORK.
      else.
        ROLLBACK WORK.
      endif.
      write:/ it_pa9004-pernr,'insert ok'.
    ELSE.
      ROLLBACK WORK.
      write:/ it_pa9004-pernr,'error'.
    ENDIF.
    PERFORM unlock_employee USING IT_PA9004-pernr .
ENDLOOP.
ENDFORM.                    " ACTION_INSERT
FORM LOCK_EMPLOYEE USING    P_PERNR
                    CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
CLEAR P_RETURN.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
    EXPORTING
      number = P_PERNR
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
CALL FUNCTION 'HR_INITIALIZE_BUFFER'
    EXPORTING
      pernr = P_PERNR.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '1'.
ENDIF.
ENDFORM.                    " LOCK_EMPLOYEE
FORM HR_INFOTYPE_OPERATION USING    P_PA9004 LIKE IT_PA9004
                                     P_ACTION type PSPAR-ACTIO
                            CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
DATA: bapipakey type bapipakey,
        P_SUBTY TYPE P9004-SUBTY,
        PP_9004 TYPE TABLE OF P9004 WITH HEADER LINE.
CLEAR P_RETURN.
REFRESH PP_9004.
MOVE-CORRESPONDING P_PA9004 TO PP_9004.
IF P_ACTION = 'INS'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
IF P_ACTION = 'MOD'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
APPEND PP_9004.
P_SUBTY = P_LGART.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
    EXPORTING
      infty         = '9004'
     subtype       = 'FQ03'
      subtype       = P_SUBTY
      number        = PP_9004-pernr
      validityend   = PP_9004-ENDDA
      validitybegin = PP_9004-begda
     RECORDNUMBER = pp_9004-seqnr
      record        = PP_9004
       operation     = 'INS'
     operation     = P_ACTION
      nocommit      = 'X'
    IMPORTING
      return        = P_RETURN
      key           = bapipakey
    EXCEPTIONS
      OTHERS        = 0.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '9'.
ENDIF.
ENDFORM.                    " HR_INFOTYPE_OPERATION
FORM UNLOCK_EMPLOYEE USING    P_PERNR.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
    EXPORTING
      number = p_pernr
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
ENDFORM.                    " UNLOCK_EMPLOYEE

Problem Creating Hyperlink to another workbook

I am having a problem creating a hyperlink to a worksheet in another workbook.
Here is what I have done:
Created the master and detail reports in 2 different workbooks.
Executed the master worksheet to display the data
Right clicked the field in the first row where I want to create the hyperlink, and chose Manage Links
Clicked the New Link button
Chose Worksheet for Where do you want to link to?
Clicked Browse by the Destination Worksheet
Clicked the detail report from the list of workbooks but the select button is grayed out
Does anyone have any idea why it won't let me select the detail report to link to?
I have OracleBI Discoverer Plus 10g
Any suggestions would be deeply appreciated.

Yes, I did add a parameter to the detail report so that I could get detail just for that one item. The part that is giving me trouble is specifying the Destination workbook/worksheet. I see the detail report when I browse but the Select button is grayed out so I haven't made it to the part where you identify what values to pass to the detail report yet.

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to iCloud, following your instructions and now I can not use my mobileme e-mail address. How can I contact directly with Apple, not just an automatic reply phone number

I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to icloud following all your instructions and now I can not use my mobile me e-mail address. I can not activate icloud because when I put my e-mail address it answers that somebody is already using my address. I have my old e-mails, but I can not receive any e-mail or send them.
I have contacted Apple Technical Support in Spain and I was sent an e-mail saying that I have to call a phone number and when I call it is always an answering machine who answers that says that I have to pay 50€ for a consultation or wait for 10 minutes. When I have made the consultation it was never mentioned that I have to pay 50€ for a phone consultation. If I don't want to wait I have to pay for the Apple Tecnical Support which cost 250 €, this was not mentioned in the technical support page.
Can somebody let me know how can I contact Apple in another way in order to talk with a human being or chat directly? I was very happy just using my mobileme e-mails, I didn't need any clouds and I was force by Apple to registered if I want to continue using my mobileme e-mail address.

Sandra,
See this Apple support document for information on reporting an issue with your iTunes purchase.
http://support.apple.com/kb/HT1933
B-rock

I would like to create a playlist of some of my voicememos to hear on my iphone5. I have no problem creating the list and can listen on playlist on computer but not when i sync to my phone. How can I listen to voicememos in a playlist on my iPhone?

I would like to create a playlist of some of my voicememos to hear on my iphone5. I have no problem creating the list and can listen on playlist on computer but not when i sync to my phone. How can I listen to voicememos in a playlist on my iPhone?

Hi czigrand,
Thanks for visiting Apple Support Communities.
Currently, you can gift dollar amounts or individual items (EG. songs) on the iTunes Store. See this article for more information:
In the iTunes Store, you can gift a dollar amount or specific music, movies, TV shows, or apps from your iPhone, iPod touch, iPad, Mac, or PC. Follow these steps to send a gift from the iTunes Store.
iTunes: Sending iTunes Gifts
http://support.apple.com/kb/HT2736
Best Regards,
Jeremy

Problem creating PD infotype

Similar Messages

Maybe you are looking for