Problem creating project from a remote configuration

Hello,
i have developed a DC with a remote configuration. After having released my development activities adn transproted it into the test and consolidation systems, i would like to go on developing. If i start the NWDS again and log onto the DTR a message is displayed, that there is a new version of my DC and i should remove and remimport the DC.
After doing so, i get the new remote DC, but my project is gone. So i tried to create a new project of this DC. During the project creation process i see many errors in the task bar: "failed to resolve reference" and "could not load used dc". But i think more important i get a popup saying, that the file dcdef is readonly and mandatory changes can not be made.
Can anyone help me with this!

Hi Pran, Ramakrishna
sorry for answering so late and thank you for your help. I did as you told me, but i can´t see anything wrong in the configuration nor can i get any further.
Pran:
I have done the DTR action on .dcdef file as you told me. Afterwards i did not get any exception regarding a readonly reason, but i can not rebuild the newly created project because of missing DCs.
"remove and import procedure"
After starting the developer studio and logging into the JDI there was a message, that there is a new configuration version active on the JDI and i should remove my local configuration and import the new remote configuration again. I think this is a normal procedure after having transported your DC.
For now i have stopped developing with the JDI. Maybe giving it a try sometime again. How is your experience with JDI?
Thank you for your help, again!
Best regards,
Christian

Similar Messages

  • Problem creating project from NWDI

    I created a WD Development Component and checked it in to NWDI.  Now, when a colleague does <i>Create Project</i> from the DTR, they can see the files in the "Navigator" view of the Web Dynpro perspective, but <b>not</b> in the "Web Dynpro Explorer" view.  So, in effect, they are unable to edit or view the Web Dynpro project.
    Has anyone else experienced this?  Any ideas and help appreciated.
    Thanks,
    Walter

    HI Peter,
    This issue is still open. Installing NWDS does not solve the problem.
    If anyone else has comments on this topic, they will be appreciated.  None of the suggestions so far in this thread have helped.
    Walter

  • Problem in created project from DTR

    Hi,
    I am getting error when trying to do something in the newly created project from DTR.
    Error like this :
    Checkout is not possible. See below for details.
    The operation requires the writeability of the following Objects:
    Component Controller com.pg.adcs.stl.SendToLab
    ======>problem: DTR workspace is not modifiable /GGT_AntiDiv_Dsendtolabcom.pg.adcs/src/packages/com/pg/adcs/stl/SendToLab.wdcontroller.xlf
    ======>problem: DTR workspace is not modifiable /GGT_AntiDiv_Dsendtolabcom.pg.adcs/src/packages/com/pg/adcs/stl/SendToLab.wdcontroller
    Please help me on this...
    Thanks
    Arun

    Thank for the reply,
    After the created project from DTR, it was need to sync resoures and sync used DC. Now its working.

  • Automatcally create Project from Sales Order

    We are on SAP R/3 4.7. We are currently using Project system for customer projects. We are manually linking the WBS element to the sales order item.
    We are considering to automatically creating project from sale order.
    Can someone offer any suggestions or recommendations?
    If you have already done in the past, did you encounter any issues or concerns that need to be considered?
    Thank You
    Sanjay

    Hi,
    As per standard configuration:
    1.) Maintain requirement class in OVZG as 80
    2) Maintain Requirement type in OVZH as KP and assign 80 there
    3) Strategy in SPRO->Project System->material->Strategy and maintain requirment class and requirement type and account assignment there.
    4).Then maintain strategy in strategy group...it would be same as 85.
    5). Then you can maintain item category from SD side and item category group from MM and assign these item categories to SD document type .
    6). Now create standard templates(Project and network activities and make assignment to standard project)
    7). Create configurable material(Variant configurator) in MM01 as KMAT and maintain item category group as same defined above and maintain strategy group in MRP tab same as defined above.
    8). Now assign these Variant configurator to standard network and projects in CN08.
    Look into these setting would definately help you.
    Regards
    Abhinay

  • BAPI/FM to Create Projects from Templates

    Is there any BAPI/FM that can create Operative Project Structures referring the Standard WBS including all objects i.e, WBS,N/W,Activities,Milestone of standard project?
    If not, what could be the work around?
    Regards
    Sreenivas

    Hi Robin !
            I have the same issue here, to create projects from a template, using a Function Module to do that, and I tryed to use the FM CJWB_PROJECT_COPY as you suggested, and I achieved to create project from template but, for any reason not known by me, the project is created without status object, so I can´t open it on any transaction(CJ02/CJ03/CJ20n...). I have tested it in SE37, using test sequences, so I call it and BAPI_TRANSACTION_COMMIT to save the data.
            To make the projects available to work, I needed to run a report named CNSTATUS as explained on SAP Note 170948.
            Do you know why using CJWB_PROJECT_COPY created the projects without status object assignment ? I could not find any documentation about this function, so maybe the problem can be caused by some wrong parameter that I was passed to it.
            Do you already used it ? If yes, can you send a sample code ?
            Thank you in advance, and best regards !
            Wilson

  • While creating project from inactive dc not able to view the project struct

    Dear All,
    I have created project from inactive dc now when I open the project in the webdynpro explorer I am not able to view the application, component and models.  I have tried reloading and repairing but still the structure is not appearing.  Can anyone tell what I may be doing wrong.
    Thankyou
    Regards,
    Ganesh

    Dear Bala,
    I have got about 8 to 10 DC's out of which only this one is showing the missing structure and as this dc is being used by other dc's I am getting the error like missing component.  Previously we were using the client desktop and doin the work now we have shifted it to our individual systems.  Now any project I am creating whether from same track or different same problem comming the structure is missing.
    Regards,
    Ganesh
    Edited by: Ganesh Sawant on Sep 8, 2009 9:42 AM

  • Can't create Project from the Template or access project template

    Dear Experts,
    We are facing a issue while trying to access the project template/create the project from project template.
    we have 4 project template in place and of these two are working perfectly fine but
    From remaining two we are not being able to create project and even templates are not accesible , whenever we are trying to access the project template system rotates a circle for some time and keeps us on the same page.
    Even when we are trying to create project from the same template, system does the same again rotates the circle for some time and keeps us on the same screen.
    And System is not throwing any error for the same (we have checked in the log as well) just not letting us in and not allowing us to create project.
    Any Help Will be Highly Appreciated.
    Regards,
    Rakesh Daiya

    Dear Experts,
    We were able to find out the issue,
    We added 3 groups to the template with "Reviewer" access with "Document Only" Type in the project template.
    When we changed the type to "Template and Document" from "Document Only" and  system started allowing us to create projects from the template.
    Can anyone please help me with one query,
    Can we add a group(which includes all the buyers) with reviewer access and with Document only type?
    Does this really be a reason behind projects are not getting created from template?
    Any help will be appreciated
    Regards,
    Rakesh Daiya

  • Error While Creating Project From Active Workspace.

    Hi Friends,
    While I am trying to create Project (WebDynpro DC) from my Active Workspace.
    I am getting few errors..They are as follows.
    1> .classpath (read only exception) --- By mistakenly .classpath was added to one of my activity and it is in DTR. So kindly suggest me a solution to Delete this file.
    2> Resource ProjectProperties.wdproperties is not in sync with latest version.
    To delete resource:
    - check-in changes and then delete.
    - revert resource and then delete.
    Kindly suggest me some solutions.
    Thanks and Regards.
    Yajush Mishra

    Hi,
    The neccesary configuration for cProjects & SAP-PS interface are as follows.
    1. Project Types in cProjects, Object types, Organisation unit with Org structure in line with project profile
    2. Activate Accounting integration
    3. Object types for object link (WBSE in this case)
    4. Accounting integration using cost collector
    5. Easy cost planing settings both in R/3 systems & cProjects
    6. Project profile configuration in R/3 (cProjects standard)
    7. CO Scenario maintainance view determination (Multi level controlling-Project role, automatic)
    All the enterprise structure assignments should be same in cProjects & R/3.
    Hope this may help you.
    Regards,
    Rakesh Pradhan

  • Problem creating a sales order for configurable material in SAP ECC

    I have a Variant Configurable material named X.
    The structure of this VC material is
    Material X has charatcertics CHARCTERISTIC1 and CHARCTERISTIC2.
    CHARCTERISTIC1 has values VALUE1
    CHARCTERISTIC2 has values VALUE2
    I created a sales order manually from VA01 using configurable material and read the values of all configuration tables to be filled from BAPISDORDER_GETDETAILEDLIST. With the help of this data i got an idea how to fill the tables of BAPI BAPI_SALESORDER_CREATEFROMDAT2. But still i am able to create a sales order but the configuration data that i give is not getting populated in the sales order.
    Where am i missing. please some body suggest. I am unable to debug and searched the forums
    for this information but dint find solution for my problem. some body please tell me where am i missing?
    Any help would be highly appreciated
    Edited by: jessica sam on Jan 12, 2009 2:59 PM

    Even after maintaining the item category MTAC(Mills Make to order config at mat level), the configurable material is not getting replaced in the sales order (va02). It is just showing material variant exists for the configurable material.
    The setting in item category for configuration is.
    Config. Strategy     01(Sales Order Strategy (TAC, TAM))
    Mat. Variant Action  4 (Replace configurable material (Append and change))
    ATP material variant 2 (Do not substitute if not completely available)
    Structure scope      D (Configuration, poss. with BOM explosion)
    I have maintained the stock for material variant as well to take care of ATP material varinat setting shown above.
    Please suggest if missing something.

  • Error when creating project from template

    I'm getting an error when i try to create a project from template. It's the same error no matter which template i select.
    WebIDE: 1.9.3.1
    Is there a new setting i missed or...?

    Henrik Damhøj Andersen
    Problem has been resolved. Please check again.
    Regards,
    JK

  • Having problems creating PDF from website with query-string URLs

    I have a website that I would like to create a PDF from. I am using the Create -> PDF from Web Page..., selecting the site's home page, and capturing 2 levels, with "stay on same path" and "stay on same server" checked in order to limit the scope of the crawl.
    Where the pages are at example.com/foo/ and example.com/foo/bar/, this works fine. However, where the pages are at example.com/foo/ and example.com/foo/?p=1, the page represented by the query string URL is not converted to the PDF.
    This is a problem, given that the site I want to archive as a PDF uses query strings for most of its pages.
    I have been able to individually convert a single query-string-based page into a PDF using this method, but doing this for every page on the site would be almost impossible given the sheer number of pages on the site.
    Is this a known issue? Is there a workaround other than separately capturing each page (which would be prohibitive effort)?
    I have tried this in both Acrobat Pro X and Acrobat Pro 9 for Mac, with the same results.

    Remember, Acrobat is a 32-bit application and as such cannot access all that 'extra' stuff.
    Be well...

  • Creating playlists from a remote mac mini

    I have most of my music ripped to a Mac Mini using iTunes. when I use my G5, i can see of the music and play it on the G5 (or any other Mac in the house). I'm sure i've done this next thing before, but I can't remember how i did it.
    I want to create a playlist on the G5 which references songs off of the Mac Mini. I will want to both play that playlist on the G5, as well as burn CDs from that playlist on the G5.
    any help would be appreciated.
    thanks
    dc

    If you are using the sharing function of iTunes, this
    will only make the songs available for playback. You
    can't create playlists from shared music or copy the
    songs.
    M
    M - Is there a way to stop the sharing function ? I have the same problem but I do not need to share as my old computer is not in use, I deathorized it but I still can not create playlists.
    EC

  • Problems creating invoice from order (DI API and SBO)

    Hello all!
    I´m getting various tax problems using the following code to automatically create invoices from existing orders.
    For Each currentKey In arrABEntrys
      objInv = objCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices)
      objAB.GetByKey(currentKey)
      objInv.CardCode = objAB.CardCode
      With objInv.Lines
        .BaseType = SAPbobsCOM.BoObjectTypes.oOrders
        .BaseEntry = currentKey
        .BaseLine = 0
        For i = 1 To objAB.Lines.Count - 1
          objInv.Lines.Add()
          BaseType = SAPbobsCOM.BoObjectTypes.oOrders
          .BaseEntry = currentKey
          .BaseLine = i
        Next
      End With
    If objInv.Add() = 0 Then
    Else
    End if
    The result of objInv.add() was first "5002 - 'Tax Definition (1)' (a very informative message to me).
    Then I checked my admin tax settings and put a check on "EU".
    The next time the result was "10 - Customer´s tax ID not defined OINV.LicTradNum"
    Actually, I don´t want to pre-set any fields in the invoice, because the order looks complete to me.
    By the way: The error occurs in SBO, too.
    Thanks for help in advance!
    Best regards
    Marian

    Hi Marian,
    Your Error "10 - Customer´s tax ID not defined OINV.LicTradNum" is not working (through DI and in SBO)
    occurs because your "Federal Tax ID" is not set up against the Business Partner. (This is on the main page of the Business Master Data Screen).
    Set this up and it will work in SBO and the DI API!

  • WebDynpro Problem - Importing Project from tutorials

    I am trying to gothru the tutorial Accessing ABAP Functions in Web Dynpro (4).
    I have downloaded and unzipped the zip file 4TutWD_FlightList.zip
    When I try and Import a project,
    It finds the Project TutWD_FlightList_init, I am able to select the project, but then I recieve a error
    "Errors importing Projects
      Error message: Invalid project description.
    I have tried other project tutorials off SDN and get the same error.

    Luciano,
    I have tried the File>Import>Import Project from File System>
    I am able to get the project created but none of the other structure is being built. The application,controller, views and window are all missing. I have tried to  rebuild the project and I have tried to repair the project. No errors but no project structure either. I was a little confused by your suggestion to extract and then extract again. I have no files in the   TutWD_FlightList_init.zip  to extract again.
    Also in the directory structure I have the files for the project such as...
    project --> ProjectProperties.wdproperties
    application --> FlightListApp.wdapplication
    resultview-->  ResultView.wdview , ResultView.wdview.xlf
    controllers --> SearchView.wdcontroller
    Any other suggestion would be appreciated,
    Thanks,
    Sarah

  • Problem Create object from superclass

    Hi,
    I have a problem with classes:
    I have one abstract superclass which has a method to create objecto for its children class.
    CREATE OBJECT R_FLIGHT TYPE (l_class_name)
         EXPORTING
           i_sflight = l_sflight.
    l_class_name: has the name of my children class
    My children class has this properties:
    A dump its triggered when I try to create object from the superclass.
    Best Regards

    Hello,
    I think that you defined the instantiation level of the superclass as PROTECTED & from the screenshot i can see that the instantiation level is protected & the class is marked as "Final".
    Are you having a factory method which returns the instance of the abstract class & you use it to achieve polymorphism?
    May be a little bit insight into your coding can help us
    BR,
    Suhas

Maybe you are looking for