Problem creating project from NWDI

I created a WD Development Component and checked it in to NWDI. Now, when a colleague does <i>Create Project</i> from the DTR, they can see the files in the "Navigator" view of the Web Dynpro perspective, but <b>not</b> in the "Web Dynpro Explorer" view. So, in effect, they are unable to edit or view the Web Dynpro project.
Has anyone else experienced this? Any ideas and help appreciated.
Thanks,
Walter

HI Peter,
This issue is still open. Installing NWDS does not solve the problem.
If anyone else has comments on this topic, they will be appreciated. None of the suggestions so far in this thread have helped.
Walter

Similar Messages

Problem creating project from a remote configuration

Hello,
i have developed a DC with a remote configuration. After having released my development activities adn transproted it into the test and consolidation systems, i would like to go on developing. If i start the NWDS again and log onto the DTR a message is displayed, that there is a new version of my DC and i should remove and remimport the DC.
After doing so, i get the new remote DC, but my project is gone. So i tried to create a new project of this DC. During the project creation process i see many errors in the task bar: "failed to resolve reference" and "could not load used dc". But i think more important i get a popup saying, that the file dcdef is readonly and mandatory changes can not be made.
Can anyone help me with this!

Hi Pran, Ramakrishna
sorry for answering so late and thank you for your help. I did as you told me, but i can´t see anything wrong in the configuration nor can i get any further.
Pran:
I have done the DTR action on .dcdef file as you told me. Afterwards i did not get any exception regarding a readonly reason, but i can not rebuild the newly created project because of missing DCs.
"remove and import procedure"
After starting the developer studio and logging into the JDI there was a message, that there is a new configuration version active on the JDI and i should remove my local configuration and import the new remote configuration again. I think this is a normal procedure after having transported your DC.
For now i have stopped developing with the JDI. Maybe giving it a try sometime again. How is your experience with JDI?
Thank you for your help, again!
Best regards,
Christian

Problem in created project from DTR

Hi,
I am getting error when trying to do something in the newly created project from DTR.
Error like this :
Checkout is not possible. See below for details.
The operation requires the writeability of the following Objects:
Component Controller com.pg.adcs.stl.SendToLab
======>problem: DTR workspace is not modifiable /GGT_AntiDiv_Dsendtolabcom.pg.adcs/src/packages/com/pg/adcs/stl/SendToLab.wdcontroller.xlf
======>problem: DTR workspace is not modifiable /GGT_AntiDiv_Dsendtolabcom.pg.adcs/src/packages/com/pg/adcs/stl/SendToLab.wdcontroller
Please help me on this...
Thanks
Arun

Thank for the reply,
After the created project from DTR, it was need to sync resoures and sync used DC. Now its working.

BAPI/FM to Create Projects from Templates

Is there any BAPI/FM that can create Operative Project Structures referring the Standard WBS including all objects i.e, WBS,N/W,Activities,Milestone of standard project?
If not, what could be the work around?
Regards
Sreenivas

Hi Robin !
        I have the same issue here, to create projects from a template, using a Function Module to do that, and I tryed to use the FM CJWB_PROJECT_COPY as you suggested, and I achieved to create project from template but, for any reason not known by me, the project is created without status object, so I can´t open it on any transaction(CJ02/CJ03/CJ20n...). I have tested it in SE37, using test sequences, so I call it and BAPI_TRANSACTION_COMMIT to save the data.
        To make the projects available to work, I needed to run a report named CNSTATUS as explained on SAP Note 170948.
        Do you know why using CJWB_PROJECT_COPY created the projects without status object assignment ? I could not find any documentation about this function, so maybe the problem can be caused by some wrong parameter that I was passed to it.
        Do you already used it ? If yes, can you send a sample code ?
        Thank you in advance, and best regards !
        Wilson

While creating project from inactive dc not able to view the project struct

Dear All,
I have created project from inactive dc now when I open the project in the webdynpro explorer I am not able to view the application, component and models. I have tried reloading and repairing but still the structure is not appearing. Can anyone tell what I may be doing wrong.
Thankyou
Regards,
Ganesh

Dear Bala,
I have got about 8 to 10 DC's out of which only this one is showing the missing structure and as this dc is being used by other dc's I am getting the error like missing component. Previously we were using the client desktop and doin the work now we have shifted it to our individual systems. Now any project I am creating whether from same track or different same problem comming the structure is missing.
Regards,
Ganesh
Edited by: Ganesh Sawant on Sep 8, 2009 9:42 AM

Can't create Project from the Template or access project template

Dear Experts,
We are facing a issue while trying to access the project template/create the project from project template.
we have 4 project template in place and of these two are working perfectly fine but
From remaining two we are not being able to create project and even templates are not accesible , whenever we are trying to access the project template system rotates a circle for some time and keeps us on the same page.
Even when we are trying to create project from the same template, system does the same again rotates the circle for some time and keeps us on the same screen.
And System is not throwing any error for the same (we have checked in the log as well) just not letting us in and not allowing us to create project.
Any Help Will be Highly Appreciated.
Regards,
Rakesh Daiya

Dear Experts,
We were able to find out the issue,
We added 3 groups to the template with "Reviewer" access with "Document Only" Type in the project template.
When we changed the type to "Template and Document" from "Document Only" and system started allowing us to create projects from the template.
Can anyone please help me with one query,
Can we add a group(which includes all the buyers) with reviewer access and with Document only type?
Does this really be a reason behind projects are not getting created from template?
Any help will be appreciated
Regards,
Rakesh Daiya

Automatcally create Project from Sales Order

We are on SAP R/3 4.7. We are currently using Project system for customer projects. We are manually linking the WBS element to the sales order item.
We are considering to automatically creating project from sale order.
Can someone offer any suggestions or recommendations?
If you have already done in the past, did you encounter any issues or concerns that need to be considered?
Thank You
Sanjay

Hi,
As per standard configuration:
1.) Maintain requirement class in OVZG as 80
2) Maintain Requirement type in OVZH as KP and assign 80 there
3) Strategy in SPRO->Project System->material->Strategy and maintain requirment class and requirement type and account assignment there.
4).Then maintain strategy in strategy group...it would be same as 85.
5). Then you can maintain item category from SD side and item category group from MM and assign these item categories to SD document type .
6). Now create standard templates(Project and network activities and make assignment to standard project)
7). Create configurable material(Variant configurator) in MM01 as KMAT and maintain item category group as same defined above and maintain strategy group in MRP tab same as defined above.
8). Now assign these Variant configurator to standard network and projects in CN08.
Look into these setting would definately help you.
Regards
Abhinay

Error when creating project from template

I'm getting an error when i try to create a project from template. It's the same error no matter which template i select.
WebIDE: 1.9.3.1
Is there a new setting i missed or...?

Henrik Damhøj Andersen
Problem has been resolved. Please check again.
Regards,
JK

Error While Creating Project From Active Workspace.

Hi Friends,
While I am trying to create Project (WebDynpro DC) from my Active Workspace.
I am getting few errors..They are as follows.
1> .classpath (read only exception) --- By mistakenly .classpath was added to one of my activity and it is in DTR. So kindly suggest me a solution to Delete this file.
2> Resource ProjectProperties.wdproperties is not in sync with latest version.
To delete resource:
- check-in changes and then delete.
- revert resource and then delete.
Kindly suggest me some solutions.
Thanks and Regards.
Yajush Mishra

Hi,
The neccesary configuration for cProjects & SAP-PS interface are as follows.
1. Project Types in cProjects, Object types, Organisation unit with Org structure in line with project profile
2. Activate Accounting integration
3. Object types for object link (WBSE in this case)
4. Accounting integration using cost collector
5. Easy cost planing settings both in R/3 systems & cProjects
6. Project profile configuration in R/3 (cProjects standard)
7. CO Scenario maintainance view determination (Multi level controlling-Project role, automatic)
All the enterprise structure assignments should be same in cProjects & R/3.
Hope this may help you.
Regards,
Rakesh Pradhan

Having problems creating PDF from website with query-string URLs

I have a website that I would like to create a PDF from. I am using the Create -> PDF from Web Page..., selecting the site's home page, and capturing 2 levels, with "stay on same path" and "stay on same server" checked in order to limit the scope of the crawl.
Where the pages are at example.com/foo/ and example.com/foo/bar/, this works fine. However, where the pages are at example.com/foo/ and example.com/foo/?p=1, the page represented by the query string URL is not converted to the PDF.
This is a problem, given that the site I want to archive as a PDF uses query strings for most of its pages.
I have been able to individually convert a single query-string-based page into a PDF using this method, but doing this for every page on the site would be almost impossible given the sheer number of pages on the site.
Is this a known issue? Is there a workaround other than separately capturing each page (which would be prohibitive effort)?
I have tried this in both Acrobat Pro X and Acrobat Pro 9 for Mac, with the same results.

Remember, Acrobat is a 32-bit application and as such cannot access all that 'extra' stuff.
Be well...

Problems creating invoice from order (DI API and SBO)

Hello all!
I´m getting various tax problems using the following code to automatically create invoices from existing orders.
For Each currentKey In arrABEntrys
objInv = objCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices)
objAB.GetByKey(currentKey)
objInv.CardCode = objAB.CardCode
With objInv.Lines
    .BaseType = SAPbobsCOM.BoObjectTypes.oOrders
    .BaseEntry = currentKey
    .BaseLine = 0
    For i = 1 To objAB.Lines.Count - 1
      objInv.Lines.Add()
      BaseType = SAPbobsCOM.BoObjectTypes.oOrders
      .BaseEntry = currentKey
      .BaseLine = i
    Next
End With
If objInv.Add() = 0 Then
Else
End if
The result of objInv.add() was first "5002 - 'Tax Definition (1)' (a very informative message to me).
Then I checked my admin tax settings and put a check on "EU".
The next time the result was "10 - Customer´s tax ID not defined OINV.LicTradNum"
Actually, I don´t want to pre-set any fields in the invoice, because the order looks complete to me.
By the way: The error occurs in SBO, too.
Thanks for help in advance!
Best regards
Marian

Hi Marian,
Your Error "10 - Customer´s tax ID not defined OINV.LicTradNum" is not working (through DI and in SBO)
occurs because your "Federal Tax ID" is not set up against the Business Partner. (This is on the main page of the Business Master Data Screen).
Set this up and it will work in SBO and the DI API!

WebDynpro Problem - Importing Project from tutorials

I am trying to gothru the tutorial Accessing ABAP Functions in Web Dynpro (4).
I have downloaded and unzipped the zip file 4TutWD_FlightList.zip
When I try and Import a project,
It finds the Project TutWD_FlightList_init, I am able to select the project, but then I recieve a error
"Errors importing Projects
Error message: Invalid project description.
I have tried other project tutorials off SDN and get the same error.

Luciano,
I have tried the File>Import>Import Project from File System>
I am able to get the project created but none of the other structure is being built. The application,controller, views and window are all missing. I have tried to rebuild the project and I have tried to repair the project. No errors but no project structure either. I was a little confused by your suggestion to extract and then extract again. I have no files in the TutWD_FlightList_init.zip to extract again.
Also in the directory structure I have the files for the project such as...
project --> ProjectProperties.wdproperties
application --> FlightListApp.wdapplication
resultview--> ResultView.wdview , ResultView.wdview.xlf
controllers --> SearchView.wdcontroller
Any other suggestion would be appreciated,
Thanks,
Sarah

Problem Create object from superclass

Hi,
I have a problem with classes:
I have one abstract superclass which has a method to create objecto for its children class.
CREATE OBJECT R_FLIGHT TYPE (l_class_name)
EXPORTING
i_sflight = l_sflight.
l_class_name: has the name of my children class
My children class has this properties:
A dump its triggered when I try to create object from the superclass.
Best Regards

Hello,
I think that you defined the instantiation level of the superclass as PROTECTED & from the screenshot i can see that the instantiation level is protected & the class is marked as "Final".
Are you having a factory method which returns the instance of the abstract class & you use it to achieve polymorphism?
May be a little bit insight into your coding can help us
BR,
Suhas

Problems sharing project from iMovie to iDVD

I understand that in order to share my project from iMovie to iDVD, I must go to Share > iDVD. I did this, then began adding a main menu and other details to my project in iDVD. Then I went to view the project. I discovered some errors I had made while editing the project in iMovie, so I quit iDVD and went back to iMovie to make the corrections.
After I fixed my project, I went back to Share > iDVD to discover that iDVD had been grayed out. I have already tried:
1. Restarting the computer
2. Duplicating the project
I have the latest versions of all the software (just bought my MacBook over the holidays). Help, please.

Hi,
I am having the same problem with imovie - did you ever resolve this problem?
Thanks

To create project from service order

Hi All
Is it possible to create project (network Order ) from Service order ( SM01,SM02,SM03)??? if yes... How???
Neil

Are you referring to Assembl;;y processing ?... You can create service order from Sales Order, but you cannot create proejct from Service order automatically.
With regards
Nitin P.

Problem creating project from NWDI

Similar Messages

Maybe you are looking for