Problem creating slideshow

I've created a slideshow in iPhoto '09. It looks great on my monitor. I click on 'Share -> Send to iDVD. I can then preview it, but it looks absolutely awful. All the images are very dark, lost detail in the shadow areas, and it has a red color cast so everyone looks sunburned. I haven't actually burned it to a DVD yet, will try that tomorrow. I also can't get it to loop. It is about 3 1/2 mins. long, no music, and I was hoping it would just continue looping like it does on my iMac. I have a Macbook Pro, but at the restaurant where this will be showing, they do not know how to hook up a Mac to their projector. They couldn't give me specifics about their projector, so I am borrowing a PC laptop to run a DVD (hopefully).
I have been able to copy the slide show to a flash drive, and it shows very well using that, but it loses it's looping function.
I know this is a Mac group, but if I can import the slideshow onto the PC, and show it that way, does anyone know how to make it loop (play continuously)? I'm in a time crunch here, because this is needed at a party in a few days.
Thanks so much for any suggestions you can throw my way.

Me again! On my iMac, I opened up Quicktime, dragged the slideshow over to it's icon on the dock, clicked on 'View -> Loop' and it worked brilliantly. Images look good, and yes, it DID loop! Yay!
Now, does this drag and drop routine work on a PC? How do I get it to open on a PC? And will it have the same icons in the top menu bar? I told you I was ignorant about PC's!!!
Thanks so very much for your help. I can now burn it to DVD without really worrying about the looping. The DVD will now just be a remembrance and not really need to repeat endlessly.

Similar Messages

Problems Creating Slideshow DVD using PSE 8.0

I have created a slideshow DVD in the past without problems. I have recently created a new slideshow of photos along with audio. It previews just fine in both PSE and Windows Movie Maker, but after I burned the DVD, only one song plays back when the DVD is in the TV.
Any suggestions?

Unless you have the combine programs Photoshop Elements & Premier Elements; there are limitations.
If you have other software; it’s possible to combine multiple tracks or play lists ant then attach them as a single file in the slideshow editor.

Using iDVD, I've no problem creating a slideshow, but I want to add three seperate sound files, in this case speeches I've got in iTunes. I want to create three individual buttons/sub menu to access them individually from the photos. Can anyone help

Using iDVD I've no problem creating a slideshow, but am having problems trying to add three seperate sound files in this case three speeches that I hold in iTunes. I want to be able to access them individually and seperately from the photo slideshow. Can anyone advise if this can be done and if it can, how I go about creating the seperate menu and buttons.

If you'd like to integrate the speeches with the slideshow, I'd do that in iMovie where you'll have more control over the timing. Use chapter markers at the beginning of each speech so the viewer can jump to a particular speech (note that chapter markers advance the viewer to a particular spot -- the viewer keeps watching the rest of the video until the end of everything or until they use the remote's menu button).
If you're just wanting the speeches to be on the DVD so people can listen to the speeches after seeing your slideshow, you could:
- use iDVD or iMovie to make a "slideshow" with just 1 image matching the length of a speech.
- create three submenus and use the speeches as menu music. Here's a (random) video on creating submenus:
http://www.youtube.com/watch?v=DlhQSb_D5kc
John

PSE 11 encounters an unexpected problem and closes every time I click create slideshow

I just downloaded PSE 11 and I am experiencing the same problem I had with PSE 9. Every Time I try to open create slideshow the program "encounters an unexpected problem and must close".
The only other "create" I have tried is photocollage and it opened without problem. Any chance this could be a conflict with my Kaspersky security software or some other program? My first version
was 4.0 and the create slideshow worked fine when first installed, then after I installed a workaround from the forum after encountering a problem. But I could never get create slideshow to open in
PSE9 and now again in 11.

Please try the suggestions given on thread http://forums.adobe.com/message/4193698
Lets us know if that doesn't resolve your issue.
Thanks
Andaleeb

Audio problem when creating slideshows

When creating slideshows in Adobe Photoshop Elements 9.0 I do not get any audio/music in the .pdf file.
I can get audio in preview and if I create a .wmv file but not in the .pdf file.
Why?
I seen some discussions on the forum but no real answer.
I have tried to add the document as a trusted document in the preferences.
I have tried with Adobe reader 7.0, 9 and X. Nothing works.
Note: My music is longer than the slideshow since I would like music during the whole slideshow. It is one musicfile.
I run on a PC, Windows XP, servicepack 3.
Is this a bug in Adobe Photoshop Elements??
Some error by me?
Or is there a workaround?
/Tor

OK!
Thank you!
Seemed so strange since the Adobe Photoshop Album 2.0 was able to do this. Sad that this function disappearred. Is there another way to get music in the .pdf file?
The .wmv file seem to distroy the picture resolution quite a lot. I get the impression that if I set the .pdf and .wmv output to same resolution the .wmv file gives pictures that seem to be done with a lower resolution (that the pictures get damaged in the transformation) . .....and as an extra disadvantage the file gets big.
Do you have any suggestion for what you think is the best option for me to do a slideshow?
Best regards
/Tor

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years. Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge. 180GB plus.
I now have a Macbook Pro and will add an iMac when the new models arrive. For my photos, I want to stay with Photoshop which also gives me the Bridge. The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows. What am I missing and is using iPhoto worth the effort?
If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient. If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward. However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto. In the past, I have experienced syncing problems with, and database errors in, large databases. If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
Some guidance and insight would be appreciated. I have a number of Faces questions which I will save for later.

Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

IPhoto 09 will no longer create slideshows.

Most previously created slideshows seem to play fine. However, iPhoto 09 won't create new slideshows. Running OS X 10.6.8 on an iMac. ??? Any help will be appreciated.

I'm having the save problem. Using iPhoto '09 (8.1.2) on iMac 3.06 Ghz Intel Core 2 Duo ... OS X 10.9.5.
I select an album, press the "+" at the bottom of the Source box, enter a name for the new slideshow and wait. Then nothing seems to happen. No addition to the Source listing. Number of pictures doesn't seem to make any difference.
Appreciate any help/ suggestions.

Create slideshow - language or font error ?!

Hi,
I have Fireworks CS3 in German - CS3-MasterCollection
In FW we can create a slideshow = create slideshow
The problem is, that in the panel appears 2 languages German
and Symbols (Japan, China)
What can I do?
Greetings

Hi,
> In FW we can create a slideshow = create slideshow
> The problem is, that in the panel appears 2 languages
German and Symbols
> (Japan, China)
I noticed the same problem on 22/02 and asked for help. It
seems to be a
"German" problem.
Leolux

Creating slideshows with FCE

Hello everybody
In this thread I'm not really seeking resolve to a problem but, more to the tune of,
" What is lacking or missing ? " , Please let me explain, For over a year now I have been creating slideshows from stills. I cant really recall the very first app I used but, I graduated to Photo to Movie before to long. PTM did a good job but, yet something was missing to satisfy my taste so. I ran out and bought FCE and, have now been creating exclusively with FCE.
Now I'm creating all my shows using PSD files coupled with motion graphics, overlays, lower thirds so forth and so on... I have create some rather impressive shows that have amazed those who have seen them to this point. Yet, I feel I have not fully satisfied my creativity.
I have googled slideshows till I'm blue in the face, seeking examples and or direction that may satisfy
my creativity. Every site I have seen that creates these shows, create them in my opinion, a very generic way....
I have yet to use any form of plug-ins, I have only been using the filters and effects in FCE, maybe that is what I'm lacking but, plug-ins really pertain to actual video , not stills ...
The direction I'm taking this thread and, the questions I have are.
What have some of you done for dressing up slideshows ?
What other apps may you have used in creating ?
What plug-ins if any have you used ?
If you know of a site that has awesome examples could you please post a link ?
Thank you all in advance for any and all help you may offer ....

_Currently I’m working on a project where 9 stills are dropped onto the screen like cards thrown across the table, each still has an independent pan._
Thats an awesome idea really, I just created a title similar to yours . I used it to introduce the family
I'm creating the slideshow for.
_Photo To Movie type apps will do anything like that._
PTM is a good app, it's really geared up for simplicity. When I first started with PTM , I bought it with the intension of importing into FCE. However, after learning how to work with stills in FCE, there really wasn't a need for PTM. If PTM was capable of adding motion graphics as backgrounds, I would have a lot more use for it. The lack of this capability forces you to export in an animation .mov , rather than .DV NTSC , this is a big drawback. Even if I wanted to use PTM just to set my stills and, add my motion, the rendering and, re-rendering in FCE just is not worth the haste.
_I have found my best slide shows are a combination of music that really fits the theme and a good Ken Burns effect. Music moves the soul._
This is very true, I have taken it a step above this and, have started adding sound effects to my transitions, not to all of them, but to a selected few. I personally feel that adding sound effect to al of them, would be to much. The hard part for me on this is , finding just the right sound effect. I need to start toying more with Garage Band and, see if I can just create the needed sounds.
_I think the main problem is one of all artists. While I am creating it, it is my best work ever. When it is viewed by other people, they are always floored. But if I watch it a day later, it looks like a piece of poo, there was always something I could have done better or a certain something was missing._
This is all very true, I face that problem with everything I have created. Seems everyone I create I learn yet another trick of the trade and saying , " This is going to be awesome, my best yet ". Completion day comes I burn to DVD, then I nit pick it to death.
I'm very artistic and creative by nature, I know I have always been my own worst critic. If one was to ask me today how I feel, about my progress in my work. I would have to say I feel I'm about 10% of where I would like to be.

Create Slideshow Using Premiere CS3 Mac

I would like to create a slideshow that can be played back full screen on a computer or burned and played back on a DVD. I have no problem creating the show in Premiere, adding audio etc. These are high quality Photoshop psd files. When I export to Encore and create a DVD the images are out of focus.
My questions are:
1) What should the image size, resolution, pixel aspect ration be?
2) What should my project settings be?
3) Can I change them in an existing project if they are wrong?
4) What should my settings be when I export to Encore?
I am trying to get this done by Christmas and I am running out of time! If you can help I will see that you are put on Santa's nice list! :)
Fred

640x480 with 1.0 PAR for NTSC
For NTSC use NTSC DV
No. Create a new project with the correct settings and import the old project into it.
For NTSC use the NTSC preset.
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 300 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you

Problem Creating Hyperlink to another workbook

I am having a problem creating a hyperlink to a worksheet in another workbook.
Here is what I have done:
Created the master and detail reports in 2 different workbooks.
Executed the master worksheet to display the data
Right clicked the field in the first row where I want to create the hyperlink, and chose Manage Links
Clicked the New Link button
Chose Worksheet for Where do you want to link to?
Clicked Browse by the Destination Worksheet
Clicked the detail report from the list of workbooks but the select button is grayed out
Does anyone have any idea why it won't let me select the detail report to link to?
I have OracleBI Discoverer Plus 10g
Any suggestions would be deeply appreciated.

Yes, I did add a parameter to the detail report so that I could get detail just for that one item. The part that is giving me trouble is specifying the Destination workbook/worksheet. I see the detail report when I browse but the Select button is grayed out so I haven't made it to the part where you identify what values to pass to the detail report yet.

I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to iCloud, following your instructions and now I can not use my mobileme e-mail address. How can I contact directly with Apple, not just an automatic reply phone number

I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to icloud following all your instructions and now I can not use my mobile me e-mail address. I can not activate icloud because when I put my e-mail address it answers that somebody is already using my address. I have my old e-mails, but I can not receive any e-mail or send them.
I have contacted Apple Technical Support in Spain and I was sent an e-mail saying that I have to call a phone number and when I call it is always an answering machine who answers that says that I have to pay 50€ for a consultation or wait for 10 minutes. When I have made the consultation it was never mentioned that I have to pay 50€ for a phone consultation. If I don't want to wait I have to pay for the Apple Tecnical Support which cost 250 €, this was not mentioned in the technical support page.
Can somebody let me know how can I contact Apple in another way in order to talk with a human being or chat directly? I was very happy just using my mobileme e-mails, I didn't need any clouds and I was force by Apple to registered if I want to continue using my mobileme e-mail address.

Sandra,
See this Apple support document for information on reporting an issue with your iTunes purchase.
http://support.apple.com/kb/HT1933
B-rock

I would like to create a playlist of some of my voicememos to hear on my iphone5. I have no problem creating the list and can listen on playlist on computer but not when i sync to my phone. How can I listen to voicememos in a playlist on my iPhone?

I would like to create a playlist of some of my voicememos to hear on my iphone5. I have no problem creating the list and can listen on playlist on computer but not when i sync to my phone. How can I listen to voicememos in a playlist on my iPhone?

Hi czigrand,
Thanks for visiting Apple Support Communities.
Currently, you can gift dollar amounts or individual items (EG. songs) on the iTunes Store. See this article for more information:
In the iTunes Store, you can gift a dollar amount or specific music, movies, TV shows, or apps from your iPhone, iPod touch, iPad, Mac, or PC. Follow these steps to send a gift from the iTunes Store.
iTunes: Sending iTunes Gifts
http://support.apple.com/kb/HT2736
Best Regards,
Jeremy

Problem creating Allocation Table with Reference to a PO

Dear Folks,
I am having problems creating an allocation table with reference to a PO in T-code WA01.
I read the SAP help that some prerequisites need to exist:
==> You can only reference order items flagged as being relevant to a stock split (the Allocation table relevant indicator in the additional item data).
Can anyone advice me where to find this stock split indicator?
Also, can anyone advice me how to reuse an allocation table? For example, I had previously created an allocation table with many articles and various allocation rules. I already generated follow on documents for this table.
Say after 2 weeks, I have the similar requirements that I can make use of the same table, only with minor adjustments to the quantity. How do I create a new allocation table using the existing allocation table data?
Thanks and Regards
Junwen

Any idea please?
thanks

Problem creating Network ACL for a ROLE in Oracle 11gR2

According to Oracle Documentation when you create a new Network ACL you can add privileges to a user or role. I need to create a new ACL for the UTL_SMTP package for a specific role, but when I granted it the users who have that role are still getting the "ORA-24247: network access denied by access control list (ACL)" error when they try to send an email. If I grant the ACL privilege to the same users directly it works fine. Is there any step I'm missing? This is the test I have made on my Solaris 10 - Oracle 11gR2 (11.2.0.3) Standard Edition server:
SQL*Plus: Release 11.2.0.1.0 Production on Wed Aug 21 09:31:52 2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> CONNECT system/******@testdb
Connected.
SQL> SET LINES 1000
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE    11.2.0.3.0      Production
TNS for Solaris: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
SQL> COLUMN host FORMAT A20
SQL> COLUMN lower_port FORMAT 99999
SQL> COLUMN upper_port FORMAT 99999
SQL> COLUMN acl FORMAT A40
SQL> COLUMN acl FORMAT A40
SQL> COLUMN principal FORMAT A15
SQL> COLUMN privilege FORMAT A10
SQL> COLUMN is_grant FORMAT A8
SQL> COLUMN status FORMAT A10
SQL> SELECT host, lower_port, upper_port, acl FROM dba_network_acls;
no rows selected
SQL> SELECT acl,principal,privilege,is_grant FROM dba_network_acl_privileges;
no rows selected
SQL> CREATE USER testacl IDENTIFIED BY testacl;
User created.
SQL> GRANT CONNECT TO testacl;
Grant succeeded.
SQL>
SQL> BEGIN
2     dbms_network_acl_admin.create_acl('test_smtp.xml','TEST SMTP ACL','TESTACL',true,'connect');
3     dbms_network_acl_admin.assign_acl('test_smtp.xml','localhost',25);
4     commit;
5 END;
6 /
PL/SQL procedure successfully completed.
SQL> SELECT host, lower_port, upper_port, acl FROM dba_network_acls;
HOST                 LOWER_PORT UPPER_PORT ACL
localhost                    25         25 /sys/acls/test_smtp.xml
SQL> SELECT acl,principal,privilege,is_grant FROM dba_network_acl_privileges;
ACL                                      PRINCIPAL       PRIVILEGE IS_GRANT
/sys/acls/test_smtp.xml                  TESTACL         connect    true
After creating this ACL I test it like this:
SQL> CONNECT testacl/testacl@testdb
Connected.
SQL> SELECT host, lower_port, upper_port, privilege, status FROM user_network_acl_privileges;
HOST                 LOWER_PORT UPPER_PORT PRIVILEGE STATUS
localhost                    25         25 connect    GRANTED
SQL> DECLARE
2     c utl_smtp.connection;
3 BEGIN
4     c := utl_smtp.open_connection('localhost', 25); -- SMTP on port 25
5     utl_smtp.helo(c, 'localhost');
6     utl_smtp.mail(c, 'Oracle11.2');
7     utl_smtp.rcpt(c, '[email protected]');
8     utl_smtp.data(c,'From: Oracle'||utl_tcp.crlf||'To: [email protected]'||utl_tcp.crlf||'Subject: UTL_SMTP TEST'||utl_tcp.crlf||'');
9     utl_smtp.quit(c);
10 END;
11 /
PL/SQL procedure successfully completed.
SQL>
This works fine and I receive the email correctly. Now if I try to do the same thing for a role:
SQL> CONNECT system/******@testdb
Connected.
SQL> BEGIN
2     dbms_network_acl_admin.drop_acl('test_smtp.xml');
3     commit;
4 END;
5 /
PL/SQL procedure successfully completed.
SQL> SELECT host, lower_port, upper_port, acl FROM dba_network_acls;
no rows selected
SQL> CREATE ROLE testacl_role;
Role created.
SQL> GRANT testacl_role TO testacl;
Grant succeeded.
SQL> ALTER USER testacl DEFAULT ROLE ALL;
User altered.
SQL>
SQL> BEGIN
2     dbms_network_acl_admin.create_acl('test_smtp.xml','TEST SMTP ACL','TESTACL_ROLE',true,'connect');
3     dbms_network_acl_admin.assign_acl('test_smtp.xml','localhost',25);
4     commit;
5 END;
6 /
PL/SQL procedure successfully completed.
SQL> SELECT host, lower_port, upper_port, acl FROM dba_network_acls;
HOST                 LOWER_PORT UPPER_PORT ACL
localhost                    25         25 /sys/acls/test_smtp.xml
SQL> SELECT acl,principal,privilege,is_grant FROM dba_network_acl_privileges;
ACL                                      PRINCIPAL       PRIVILEGE IS_GRANT
/sys/acls/test_smtp.xml                  TESTACL_ROLE    connect    true
SQL>
And now I test it again with the same user:
SQL> CONNECT testacl/testacl@testdb
Connected.
SQL>
SQL> SELECT host, lower_port, upper_port, privilege, status FROM user_network_acl_privileges;
no rows selected
SQL> DECLARE
2     c utl_smtp.connection;
3 BEGIN
4     c := utl_smtp.open_connection('localhost', 25); -- SMTP on port 25
5     utl_smtp.helo(c, 'localhost');
6     utl_smtp.mail(c, 'Oracle11.2');
7     utl_smtp.rcpt(c, '[email protected]');
8     utl_smtp.data(c,'From: Oracle'||utl_tcp.crlf||'To: [email protected]'||utl_tcp.crlf||'Subject: UTL_SMTP TEST'||utl_tcp.crlf||'');
9     utl_smtp.quit(c);
10 END;
11 /
DECLARE
ERROR at line 1:
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "SYS.UTL_TCP", line 17
ORA-06512: at "SYS.UTL_TCP", line 267
ORA-06512: at "SYS.UTL_SMTP", line 161
ORA-06512: at "SYS.UTL_SMTP", line 197
ORA-06512: at line 4
SQL>
I'm aware that role privileges doesn't apply inside procedures, functions or packages by default, but this is an anonymous block so it should use the active roles for the user. I also tried adding a "dbms_session.set_role('TESTACL_ROLE');" at the beggining of the anonymous PL/SQL block but I got the same access error.
Thanks in advance for any help you can give to me on this question, it would be very hard to grant the ACL to all the individual users as they are more than 1000, and we create more regularly.

Thanks for your quick reply... I don't have a problem creating the basic ACL with the privileges granted for a user. The problem appears when I try to create an ACL with privileges for a ROLE. You can see here http://docs.oracle.com/cd/E11882_01/appdev.112/e25788/d_networkacl_adm.htm#BABIGEGG than the official Oracle documentation states that you can assign the ACL principal to be a user or role:
Parameter
Description
acl
Name of the ACL. Relative path will be relative to "/sys/acls".
description
Description attribute in the ACL
principal
Principal (database user or role) to whom the privilege is granted or denied. Case sensitive.
My issue is that when I try to create the ACL for a role it doesn't work.
Have you ever created an ACL for a role? if so please send me an example or let me know which step I might be missing. Cheers.

Problem creating slideshow

Similar Messages

Maybe you are looking for