Problem creating transactional iview for BW system

Hi gurus
We are facing one problem creating a transactional iview for a BW 3.5 system . We wanto to call transaction SU01 in our BW system using an iview. When we use SAP for html, we have all the menu on the iview , I mean the same result as if we use smen, not SU01.
And if we use SAP GUI , we are always having the same GUI Error
Sapgui 640 [Build 8986] Wed Apr 01 12:25:05 2009
: 'service '' unknown
Time          Wed Apr 01 12:25:03 2009
Component     NI (network interface)
Release          640
Version          37
Module          ninti.c
Line          505
Method          NiPGetServByName2: service '' not found
Return Code     -3
System Call     getservbyname_r
Counter          1
Please, can you help us?
Thanks in advance and best regards.

Thanks Bala for your quick reply. I´ve tried with function module RSBB_URL_PREFIX_GET and all the settings were OK. Still the same result.
Adding more information. We have another WAS 6.40 server with different Module(we have RM and XRPM , not BW) and we are having the same problems. I am wondering if its related with some special config or activation
Maybe I´ve forgot some service activation in SICF? I´m able to reach the SMEN, but not the SU01
or I´m missing some config elsewhere?
Thanks in advance.
Best regards.
Edited by: Jose Ignacio Arlandis on Apr 2, 2009 8:41 AM

Similar Messages

Transactional iview for "session_manager" not working

Dear All,
we are creating transactional iview for t code "session_manager", the problem we are facing is that it is not going to session_manager screen, instead of that it is going to S000 Transaction.
I tried using webgui also, but here I m facing some strange problem, it is using webgui for one user and for rest it is using wingui for others and again going to S000 t code.
Can you please give me some recommendations?
Thanks,
Ganesh

Hi Ganesh,
Are the Tcodes "Service_manager", S000 user defined tcodes?
cheers
dev

Configuring ITS for EP7.0 to create Transactional Iviews

Hi Everybody,
This is urgent!!!!!!!!

Do we have to configure Internet Transaction Server for EP 7.0 to create Transactional Iviews?

with regards
Brahmachaitanya

What is your backend version. If it is ECC 5.0 or ECC 6.0 you need to configure integrated ITS. There are some differences interms of features offered by standalone Vs integrated ITS. Service marketplace will list them very well. (http://service.sap.com/sap-its)
Thanks,
-Bharath

Problem while creating transaction variant for transaction KCH1.

Hi All,
I am trying to create transaction variant for KCH1 transaction code.
I am able to deactivate standard navigation options Change, Copy, Delete for the menu called "Group" in the main screen.
But I am unable to disable the standard navigation options for the menu u201CGroupu201D in the second screen where we enter possible profit center values in hierarchal structure. I want to deactivate u201COther Groupu201D , u201CChangeu201D and u201CCopyu201D In the hierarchy screen.
Please advice.
Thanks & Regards,
Padmasri

Hi,
As I have already mentioned in my previous message, I am able to deactivate standard menu options by using Menu functions for Main screen where we provide Profit center group value which needs to be created. For this screen I have passed GUID START_CO and was able to deactivate required options. But for the Hirarchial screen, I am unable to deactivate some of the menu options. In menu functions I have passed LIST_01(GUID for the screen) and deactivated the options but was not reflecting which testing the transaction variant.
Anyone please let me know if transaction variant work for my scenario. If no please suggest a solution.
Thanks & Regards,
Pratima

Problem creating Bi Iview

Hi All,
We have two Bi 7.0 Systems in our landscape , We want to create BW Iviews for both the systems in Portal . But the problem is BW Iview when selected as BI 7.0 is always taking the master system as its system .. so now all my BI iviews can only point to one system .. Is there any way to create BI iviews to two different systems.
Regards,
Tarun.

Have u tried these
Create Two system objects for two BI systems and give two different Syatem alias for them
Now create a BI Iviews for both BI Reports
Now goto to iview -- open -- property category -- system -- change the system alias SAP_LOCALSYSTEM to ur BI sytem alias u have created
Regards
Krishna.

How to create Transaction code for Table Maintanance generator.?

Hi,
I have created a Z Table. and I maintained the Table maintenance generator for the same. Now, my requirement is.. I have to create Transaction code for maintain and Display of this Z table.
Can someone help me how to create the transaction code for Maintain and Display of the table. I know that we have to create a Transaction code for 'SM30'. Can someone tell me the steps to do the same. When I goto SE93 and say CREATE transaction, I get 5 options, Which one to select and what are the details should I provide in the subsequent screens.
Thanks in advance.
Best Regards,
Paddu,

Hi,
     Check the below steps......
1. Go to Tcode u2018se93u2019.
2. Select ' Transaction with parameters'.
3. Then Transaction 'SM30' with click on skip initial screen
      VIEWNAME : XXX9tABLE NAME)
      UPDATE   : X
4. Maintain the Table maintenance generator
Authorization group : &NC&
Authorization object :
Function group : name(xxx)
Maintenance Screens :
Maintenance type : One step
Maint Screen No : Overview screen (2)
If still u have problem I will send u steps with Screen shot ...send me Yr id.
Regards,
Biswanath

How to Create Transaction code for a Report

Hi Gurus,
I created some reports and I wants those reports
should be placed in the SAP Menu(initial screen) not
in the User menu in the form of Transaction codes.
I would really appreciate if any one can please send the process to create transaction codes for the User reports/Report groups in R/3 and how to add those created Transaction codes to the SAP MENU.
Thanks in Advance
Danial

Try to insert it into the main menu if you must change S000 (there is a function module for everything)? Perhaps SAP protects their menu trees from foreign subnodes in SE43?
Also note that for report transactions you do not need to give the user transaction code start_report. If you do, then they could enter it directly and potentially start many other reports too. The system will call start_report for submitting the report internally without authorizations for it required (unless start_report is maintained in SE97).
Regarding DE, this also confuses me sometimes and I noticed that it generally indicates that I am doing something which has an implication for a SAP standard object. Try either hitting the enter button to see what the next screen is, or, choose original language in the previous screen, or, logon in sy-langu = DE and (remember the path if you dont speak German) change it, or, follow JCs advice to create your own menu.

Creating a iview for XML Form builder Edit Form

Dear Experts
I have created an XML Form builder application which has Edit from,Renderlist and Show form. I able to create a datafile in by going to content manager. My requirement is to create an iview for Edit form so that i can assignt he ivew to end user to fill this form. I dont want to give content admin to end user.
I need to create an ivew to XML Form builder Edit Form
Regards
Noel

Hi,
Now I'm confused,what do you mean with create new data? Are users editing existing documents
(as if they go to a document example.xml > edit) or they are creating new documents (as if they go
on folder > new > forms)?
The problem is, in both cases a user would need read/write permissions.
The normal flow content (data) is created in KM is as follows:
1. user is assigned to a role
2. role contains KM Navigation iView
3. KM Navigation iView executes com.sap.km.cm.navigation component
4. user chooses New > Form UI command (edit_xml_forms)
5. edit_xml_forms UI command executes its code (com.sapportals.wcm.rendering.uicommand.cm.UIXMLFormsCreateCommand) and open xml edit for the user
6. user fill the form and click Save, form is created into folder
For what I understood so far, your requirement basically asks you to go directly to step 5, it is
possible to pass a URL that goes directly to step 5, the UI command button, but if you do that
you won't have a context, so chances that it will work are slim, since a context is required to
fill the parameters asked by the app (like folder, user, permissions, etc). Even though, in some cases you can
still pass the parameters via post in the URL but you must know which service/parameters the
app asks for it, also a URL is static...
That was the create scenario, I think it's more cons than pros, users would still be
able to bypass the URL iView created for that, I'd suggest evaluating again if it's really
a problem having users access cm to manage data
kind regards,
Rafael

ORA-31637: cannot create job SYS_IMPORT_SCHEMA_01 for user SYSTEM in impdp

Hi All,
During impdp i am getting this below error:
ORA-31626: job does not exist
ORA-31637: cannot create job SYS_IMPORT_SCHEMA_01 for user SYSTEM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT_INT", line 600
ORA-39080: failed to create queues "KUPC$C_1_20090507123340" and "KUPC$S_1_20090507123340" for Data Pump job
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPC$QUE_INT", line 1606
ORA-04031: unable to allocate 56 bytes of shared memory ("streams pool","unknown object","streams pool","fixed allocation callback")
Also increase shared memory hence creating the same problem.
Can anyone sujjest me what would be the cause?
Thanks in advance...

Increase parameter streams_pool.
Set it for example to 100MB
Then try again.

How to create transaction code for a Z-table

How to create transaction code for a Z-table?
Se93 --> then which radio button to be selected? and what is the program nam e to be given

Hi Sam,
Procedure to create a TCODE for ZTABLE:
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
Se93 --> then which radio button to be selected
Select the parameter transaction as a radio button.
what is the program nam e to be given
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar

How to create transaction code for maintenance view

hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.

Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful.

Is it possible to create a program for embedded system

Is it possible to create a program for embedded system?

Yes. Many solutions.
1 = http://jcx.systronix.com/
2 = http://www.harbaum.org/till/nanovm/index.shtml (see links to Asuro)
And many more but I'm too lazy too look them for you ...
Dan

How to create an iview for ABAP Webdynpro Application in Portal?

HI,
I am Webdynpro Java webdynpro developer.
I want to create an IVIEW for an ABAP Webdynpro application in the enterprise portal.

The process is almost exactly the same as creating a Web Dynpro Java iView. You simply chose the ABAP instead of the Java radio button when you reach that step in the Web Dynpro iView creation process. There is a video on the topic here:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/eae111e7-0b01-0010-6cb7-e0dd2bfbfa7a
You can also read about the process in the online help:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1d/e4a34273f60b31e10000000a1550b0/frameset.htm

Creat transaction (se93) for Globa class in ABAP Objects

Hi experts,
       Can any one tell me how to
creat transaction (se93) for Globa class(se24) in ABAP Objects
if ,please assest me how to do it or send me example docu on this
best Answer will be rewarded
regards
fareedas

hi
se93->give your transaction ->enter create.
check the radio button (Method of calss(OO class).press enter.
in next screen.
transaction text ;give your own description
tick the check box OO transaction model.
give the class name method name which u have created in se 24.which was activated successfully.it should be activated otherwise it will not work.
under GUI SUPPORT.
TICK the all 3 check boxes.
SAP GUI FOR HTML
                        JAVA
                       WINDOWS.
then save.
u should b saved in package(don't forget).
it was working.
i have already checked and did it succesfully.
reward points
if u have any queries let me know.
kiran jagana

Transaction iView for ME53N

Hello!
I want to call a transaction-iview for transaction ME53N from my WebDynpro-application.
The application jumps to backend, but doesn't use the iView-parameters to show a special requisition.
The iView-parameters are: MEREQ_TOPLINE-BANFN_EXT='144141' and Prozess First Screen = YES.
With transaction ME53 it works fine.
Ideas?
Regards Dennis

Hi,
   In ME53 the field to enter the purchase request number was in the first screen. That's why you can pass the screen-field name & the value to display that purchase req.
   But ME53N displays the last viewed purchase req. & the purchase req. number field on that page is read-only. Hence the old approach doesn't work.
   In order to display a new purchase req. you would have to open the top-level menu "Purchase requisition"->"Other requisition". This would bring up a pop-up where you can enter the new number. You can't automate all that step by passing URL parameters.
Regards,
Satyajit.

Problem creating transactional iview for BW system

Similar Messages

Maybe you are looking for