Problem creating transformations in business content

Hi
I have made a connection between a NetWeaver 2004s BI system and a ECC 5.0 system .
i have installed BC content for cube 0SD_C03 which takes data from 2LIS_11_VAHDR and 2LIS_11_VAITM standard data sources . When i transferred the DS from R/3 to BW they were in 3.X format and i migrated it to 7.0 . Now it is not recognising the info source 2LIS_11_VAHDR and 2LIS_11_VAITM as they are of 3.x format and communicate with transfer rules. I think in this case i do not need infosources and tried to make a transformation between the cube 0SD_C03 and the ds 2LIS_11_VAHDR but it gives only one message " Proposal cannot be generated ". Can anyone tell me where i am going wrong???? even if i do the mapping manually shouldnt it automatically form the mappings ???
Thanks in advance
Ankush (on his behalf )

Yeh ...tranformations are bit hectic sometimes.
Since it is not generating any mapping for you, you have to map it manually in tranformation.

Similar Messages

0py_c02 do not have the update rules or transformations in business content

Dear All,
I ma installing the Business content 0py_c02 cube with before data floe option , i found the infosource and transfer rules between Data source and info source but i can not found the Update rules betweeen the infosource and target.
Even if u consider the data source replicated in RSDS update mode, but ther is no transformations. how we can resolve this issue , if any body faced the same issue please update the same.
For creating mannully also there are routines in that update rules( checked same in IDES version) , i can do it same, but why the SAP not delivered the same, or i am going wrong in some where pls.
Any update please , Not received any replies pls.
Please any updates pls on this, The issue is open and waiting for responce from Experts.please can anybody update me.
Thansk in Advance,
Sathish
Edited by: sathish kakumudi on Apr 21, 2010 8:48 AM
Edited by: sathish kakumudi on Apr 21, 2010 10:34 AM
Not delivered by SAP and SAP raised the same to Development team
Edited by: sathish kakumudi on Jun 13, 2010 10:07 AM

Hi Satish,
Did you get any update from SAP-team on the same.
Thanks,
SC

Problem in installation of Business Content for Solution Manager

Hi all,
I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like Infopackage 0SM_XXXX does not exist in D version; activation not possible. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I dont know why. The result is that no Process chain is visible from transaction RSPC.
Am I missing some step, or doing a wrong/ incomplete procedure ?
Thanks a lot

HI Saravanan,
For Solman Service Desk, the following objects are used :
Cube : 0CSRV_C01
DSO : 0CRM_PROH
DataSource : 0CRM_SRV_PROCESS_H
And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
Regards
Mahesh Kumar

How to create transformations in BI content

hi, while doing lo extraction , i have used data source 2lis_11_vaitm and cube 0sd_c05. I have replicated the datasource in BI, can anyone tell me how to create transformations to the data target which is 0sd_c05.

Goto RSA1 --> select "BI content" --> select " object types" --> click on "Info cubes" --> click on selection --> search for your IC 0sd_c05 -- transfer the selection to RHS --> Select Grouping " in Dataflow before and aftewrdsr"
it will display the transformations and all the queries as well. collect all the objects which you want to install and click on install.
Regards
kp

Problem installing 0SALES_UNIT from Business Content

Dear Friends,
I have tried to install 0SALES_UNIT from the business content but it does not appear under the InfoObjects tab.
What could be the problem?
When i try to install it, the system shows that an active version of the object already exists. I have tried to install it inspite of the existing active version and also get a green signal. Thanks for all the help in advance.
Raj

Raj,
Here is the solution to this problem.
You have successfully activated the infoObject but do not see it under the infoObject list. This happens due to inconsistencies in the RSDIOBCIOBJ table. To solve this error, go to SE37 and execute the RSDG_IOBC_REORG function module. Put in the following parameters.
I_IOBJVERS -
> A
I_PROGRESS -
>
I_IOBJTP -
> *
I_ALL_IOBJ -
> X
I_T_IOBJNM -
>
I_BYPASS_BUFFER-->
Press F8 to execute.
Then go to RSA1 and you should find your infoObject.
Don't forget to assign points!!!
Abdul

How to get correct transformation in Business content

Hai Gurus,
I have one issue,
For Supply chain Management info area,
my requirement is matching with Purchasing data cube ie 0pur_c01
i want to install in business content
when am install transformation related to 0pur _c01
the tech name TRCS 2LIS_02_SCL -> CUBE 0PUR_C01
i could not find out in Businees cntent selected objects ,but is there in meta data repository reg the same,
wat is the procedure need to follow?
plz suggest,

Hi,
You can find out the any objects throught Mata data repository in RSA1
1. Go to RSA1 >>> Meta data repository
2. Enter the Data target Name for search 0PUR_C01 (CUBE)
3. It will dilsplay all the objects related to the above data target.
for example if i search with the above data target it will give it as :
Transformation TRCS 2LIS_02_ITM -> CUBE 0PUR_C01 0GRF0MGIFVPEYE8OLUONXUJ9LT0I13F2
In your case the data source is 2LIS_02_SCL check in the Source system , whether it is in active or not, if it is not active
Go to RSA5 >> Activate and transfer the data source , then it may available in BW side for installation.
I hope it may help you
Regards.
Rambabu

Problem while installing SAP Business Content - Query

Hi SAP BI experts,
I am trying to install standard SAP BI contents, but getting following error while installing following queries.
1. Warehouse Stock Analytics - Inventory Turnover - 0IC_C03_Q0024
2. Inventory Turnover - 0IC_C03_Q0017
I am getting the following error while simulating install:
1. Error when activating element 4WXUV5NRUZR0GYY1WYB22EUIA / Message no. R9118
2. Object directory entry R3TR ELEM COAFSEIKGP51QJYSMX9FCEI9E does not exist / Message no. TK753 (for Calender Day)
Please share your inputs.
Thanks in advance!
Regards,
Bidyut

Hi Bidyut ,
Try to install the following objects with the option 'DataFlow Before and Afterwards ' under the grouping option .
This will collect all the necesary objects that are required for its activation .
After the necesary objects have been collected , tick mark the necessary objects then choose install .
Regards,
Lokesh

Problems in installation of Business Content...

We have just installed BI 7.0.
And for checking I tried to install a simple Query:Number of trips....
In grouping I had selected IN DATAFLOW BEFORE AND AFTERWARDS...
Still in STIMULATTE INSTALLATION I am getting errors like:
InfoObjects for InfoCube 0FITV_C01 not available in active version(error message concised as coming for all InfoObjects of the InfoCube)
Data source 0COMP_CODE_ATTR_TEXT not maintained
More errors concerning the InfoCube 0FITV_C01 coming. But infocube 0FITV_C01 is in collected items.
Can anyone please guide how to solve this.
Thanks and Regards,
Sudipto.

Hi Anil,
Thanks for your help.
I tried to install but errors are coming for Update rules...
Actually it is stating:
Data source 0HR_PA_OS_1 not maintained
This it is stating for other data Sources also...
I have successfully activated the Datasources in BI and then activated the same.
Can anyone guide me what more needs to be done to the Datasources to eliminate the error...
Regards,
Sudipto.

Error while installing the Business Content 2lis_03_bf Transformation

Hi,
I have installed total 0ic_c03 cube and successful.
Data is populating correct. When ever Releasing the Request error getting which Local objects not captured in request which are there in 2lis_03_bf info source, For this Error I have deleted the objects from info source and activated and activated transformation. But those object are there in the ROUTINES and disturbed. KEYFIGURES Routine are disappeared.
Again when have installing the BF infosource and transformations from Business content is getting below error. for Ref below screen shot.
Please advise me : urgent
Thanks & Regards,
Srinu.Rapolu

Hi,
it seems like issue with ABAP routine.
Can you try to get detail error by doing syntax check.
Also if you are in BW 7.31 - I notices while releasing it shows error. I will suggest ignore it and just released. it worked for me.
You always have option to recapture the transport and resend the same objects, if earlier failed.
Thank-You.
Regards,
VB

Does sap BI business content comes with transformation for standards

Hai Can anybody tell me whether SAP BI 7 business content
comes with fully loaded transformations with all routines in place like our 3x update rules.
For ex when i load 0hr_pa_0 and 0hr_pa_1 in 3x iam getting the routine with code in place for business contents when i migrate iam unable to trace the transformations in Business content can somebody help or is it we have to do the coding stuff for age calculation,age range etc in transformations
Plz explain.
Goodday.

Yes i figured out that myself anyhow have you worked on Hr business transformations how to go about the logic with standard in mind.
Goodday.

How to create a Table of Contents using Pages 09?

Hi guys,
I have little problems creating a Table of Contents in Pages, though it seems quite simple. I'm working with the template 'Term Paper' and I use paragraph styles (Title, Heading I, II, etc.). I have some very long documents (about 80 pages long) so I wanted to create a TOC (using sections) but it says:
The table of contents is empty because none of the paragraph styles selected in the Document Inspector are used in the document.
When I compare the paragraph styles I do use and the paragraph styles in the Document Inspector, they match. So I'm a bit upset about this because I really need to use this great feature!
Thanks for you answers guys!

I would say: Try and Error. Create a copy of your document and unmark in the copied document in the document inspector all boxes for the TOC. Then mark them again. Maybe you should also delete the paragraph styles and mark them again. If that doesn't work, try to copy the complete text of your document to a new created one. Maybe that works.
Good luck!
P.S.: If that doesn't work look here. Maybe this helps.

Errors while transporting the Business Content

hi all,
we are facing a few problems while transporting the Business Content from the Development systems to the Quality System.
it says Method Execution - Action Cancelled.
am pasting a part of the error messages also... kindly have a look at it and get back to us at the earliest as we are in the process of going-live...
 Start of the after-import method for object type R3TR IOBJ (Activation Mode)
 Interval 01 of number range RS_OBJNUMG is missing > Long text
 Interval 01 of number range RS_OBJNUMG is missing > Long text
 Interval 01 of number range RS_OBJNUMG is missing > Long text
 Interval 01 of number range RS_OBJNUMG is missing > Long text
 Interval 01 of number range RS_OBJNUMG is missing > Long text
 Interval 01 of number range RS_OBJNUMG is missing > Long text
 Interval 01 of number range RS_OBJNUMG is missing > Long text
 Interval 01 of number range RS_OBJNUMG is missing > Long text
 Interval 01 of number range RS_OBJNUMG is missing > Long text
 Interval 01 of number range RS_OBJNUMG is missing > Long text
 Interval 01 of number range RS_OBJNUMG is missing > Long text
 InfoObject 0ACN_CATGRY (in compound of characteristic 0ACN_EANUPC) not (act.) available
 Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available
 Attribute 0ACN_DEAL from characteristic 0ACN_EANUPC not (actively) available
 Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available
Errors occurred during post-handling RS_AFTER_IMPORT for UPDR L
The errors affect the following components:
 BW-WHM (Warehouse Management)
Ended with return code: ===> 12 <===
please revert bact at the earliest....
Thanks
Manicks

hi Manicks,
check if oss note 903291 helps
Transporting DataSources
Transport problem ...Urgent
Transport Issue
Number range object missing NRIV and cant activate IOBJ during import
try transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists.
also try >> all combined tests >> master data >> check master data for characteristics.
or run program RSDG_OBJNUMG_CREATE_INTERVAL
have a try oss note 903291 ?
Manual solution
Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
- RS_OBJNUMG: 0000001 - 9999000
- RSDDAGCUBE: 100000 - 199999
- RSSBRAUTH: 00000001 - 99999999
BW 3.0B
Import Support Package 30 for 3.0B
BW 3.10 Content
Import Support Package 24
BW 3.50
Import Support Package 16
BW 7.0
Import Support Package 07

3.5.3 business content

Hi All,
Can anyone tell me what steps need to be done after an upgrade. We upgraded BI Content 3.5.2 to 3.5.3.
We are running into problems with activating the Business content due to unavailable objects in D version.
Thanks in advance for your help.

Check the TCODE: SPAU list and ensure the inconsistencies are recovered.
Secondly, for InfoObjects, you can restore to the previous ACTIVE version. For this, you need to go into each InfoPbject and select the option, "Recover to previous ACTIVE version"
Regards,
GPK.

Can't create DTP for cube migrated from business content to 2004s

I am in the process of converting 3.5 Business Content InfoProviders to the new model for 2004s.
Master data was not a problem, but Im having a hard time getting InfoCubes to migrate.
I installed 0PUR_C03 from Business Content and replicated the DataSource into the Data Warehouse.
I right-clicked 2LIS_02_S013, selected Additional Functions, then chose Transformation erzeugen (a.k.a. Create Transformation in English).
The transformation is generated with no errors and it was activated. The DataSource is migrated automatically in the process.
Then, I went to add the Data Transfer Process and that is where I got stuck.
I right-clicked the cube and took Create DTP. For source type, I selected datasource. A dialog box then shows the objects associated with the cube, including the converted infosource, but nothing is highlighted for me to choose from, and I cant complete the process of creating the DTP.
Can anyone tell me where I might have gone wrong?

u got it...
Message was edited by:
Raman
Message was edited by:
Raman

Business content installation problem

Hello
When I am trying to install SD cubes through with Business content with the setting of data flow before and after , I am getting the Transfer rules .....basically I am looking for data flow in BI7 , like Transformation and DTP ? , how I will be able to install whole dataflow in BI7 method .
I am in BI7.
Regards,

Hi Akshay,
In BI7 we don't have standard Transformation(BC) so we have to install transfer rules and update rules then try to migrate 3.x to 7.0 data source after that you can create transformation manually,
Its better to install BC with grouping only necessary object coz when you select grouping after or before it will search whether you have authorization to activate ds in source system r not then if you don't have authorization you may get errors.
Then migrate the 3.x data source to bi7 data source by using rsds tcode.
Refer sapnote_0001052648 for migration
Regards
Vivek

Problem creating transformations in business content

Similar Messages

Maybe you are looking for