Problem dating back to 06

Verizon was laying cable for FIOS and hit the electric line causing sevre damage to my house and neighbors! It's been over three years and I've been told it's nobodys fault. But, today, I walk outside and see on my front door handle that they're giving away a " SUPER-COOL NETBOOK" to new customers. HEY, TAKE CARE OF YOUR OLD BUSINESS! My wife and I have made efforts to resolve this, but to no evail. We ended up letting it go, then you hit my nerve. C'mon, own up, those backhoes had "VERIZON" written all over them. I've been a loyal customer, why?
Message Edited by ElizabethS on 07-30-2009 06:21 PM

You and your neighbors should rally together and contact your local media and local government and let them know what's going on.

Similar Messages

I get a black screen on the camera app on my iPod touch? Is there a solution? Resetting only helped for a few days, problem comes back.

I get a black screen on the camera app on my iPod touch? Is there a solution? Resetting only helped for a few days, the problem comes back.
Camera works, with the side buttons it takes pictures.
Although I'm not able to see on the screen.
Mike

First try a restore from backup
If problem still occurs try a restore to factory defaults/new Pod.
If still occurs likely a hardware problem and an appoitment at the Genius Bar of an Apple store is in order.

Purchased items not showing in App Store - Problem is BACK

I post a question earlier, the problem seemed solved, but it is back agin, how frustrating !! here it is the story
I am using iPad 3rd generation, iOS6.0.1. I just recently restored it due to a few crashes and shut down.
I can get most of my app back from restoration, but I can't see any items purchased in App Store in Purchased tab. There is nothing, I tried many steps suggested in the forum, (sign out, shut off, sign back, update all info in my apple ID, etc.) but none of them seems to work.
Later...
Problem solved... The difference is I signed back in not in Setting -> iTunes & App Store, but directly open App Store, and sign in at pop up windown. the order of sign in seems "stupid", it doesn't make sense no matter how you sign in to app store, but it does make the difference. Sigh....
Now...
Problem is back again... I have no clue what's going on here with iTune and App Store... thing seems screw pretty bad... any one can help??
Thanks a lot
H

Problem solved... The difference is I signed back in not in Setting -> iTunes & App Store, but directly open App Store, and sign in at pop up windown. the order of sign in seems "stupid", it doesn't make sense no matter how you sign in to app store, but it does make the difference. Sigh....

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. Any ideas?

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. I tried excluding different parts of the software from the back-up but it didn't make any difference. I even tried exluding "invisible items" to no avail. Any ideas?

When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
A full back-up on the iMac would be about 650 GB. The partial updates that I have been trying start out at 115MB and keep growing indefinitely. The original back-up never finished nor have any of the follow-up attempts.
The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
See A10 here.
Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work.

I have updated newer version of iphone there is a problem while backing up administrator iphone.how to fix this error?

i have updated newer version of iphone there is a problem while backing up administrator iphone.how to fix this error?

what error?

OneKey Recovery 6.0. Problem with back up operating system from recovery cd'ies

Hello, i have problem with back up operating system from recovery cdies.
When i acceped start button to backup partition system i get an alert "space not enough"
I had linux before and i whant change it to windows back. i deleted all ext partitions. I have all unlocated space.I shouldnt have problems.
Please help me

I would use something like Partition Magic or Acronis Disk Director to first create a FAT32 partion for your C: Drive where your OS will go and be sure to leave 10GB or so unallocated for the secondary FAT32 Partition where your "factory image" will go.
You then create a Logical Drive with the unallocated space and make it hidden (PM or ADD will do this). Install your OS (preferably Windows XP if you want less problems) and then after you have setup everything the way you want (drivers, applications, etc), then use Acronis True Image to create your "factory restore" image on the hidden partition and activate the Startup Recovery Manager.
This is the way I do it and it works like a charm!

When I try to restore from my iCloud they say there are a problem of back up data so what can I do ?

When I try to restore from my iCloud they say there are a problem of back up data so what can I do ?

Unfortunately, nothing. If there is a problem with the backup you won't be able to use it. You'll have to restor a backup from your computer using iTunes, if you have one.

In Iphoto 11 all 7000 of my photos show the same thumbnail. I rebuilt the thumbnail using ctr alt and opening iPhoto. This worked and rebuilt the thumbnails correctly. Then when I reopened iPhoto the problem came back? Help please?

In Iphoto 11 all 7000 of my photos show the same thumbnail. I rebuilt the thumbnail using ctr alt and opening iPhoto. This worked and rebuilt the thumbnails correctly. Then when I reopened iPhoto the problem came back? Help please?

Where is your Library stored?

My 4-year old AirPort Extreme intermittently drops out (no signal to my iMac Book). The laptop shows reception of other nearby Wi-Fi transmitters, but not mine. I have changed the bands, but the problem comes back. Transmitter problem or interference?

My 4-year old AirPort Extreme intermittently drops out (no signal to my iMac Book). My hard-wired iMac still has internet capability. The laptop shows reception of other nearby Wi-Fi transmitters, but not mine. I have changed the bands back and forth, but the problem comes back. How can I check if it is a transmitter problem or interference?

Let me see if I can suggest a strategy.
I have talked with my ISP and he said that I am not the only one with an Airport Extreme with the same issue. He said to try to write the DNS direclty, rather than using the Auto settings - still nothing works.
What modem do you have and what sort of broadband?
What mode is the AE in.. router or bridge?
I have an Airport Express from 2010. Since about a month and definetly since yesterday, I cannot connect any device via Wifi to it although LAN connection works correctly.
Is this express or extreme.. the rest of the post you refer to extreme.
What is the actual model number of the AE? A1xxx from the base or the part number MCxxx from the box.
If the AE is bridge.. I want you to try a different method.. put it in router mode.. don't worry about double NAT but ensure the IP range of the modem /router is different to the AE.. so if one is 192.168.x.x then the AE on default at 10.x.x.x is fine.. if the main router is 10.x then move the AE to 192.168.x.x
Make sure the guest wireless is off.
Using a 5.6 utility on your 10.6.8 OS mini go to the log and see if the wireless is registering..
You should see lists of wireless connection like..
Post as many screenshots of the setup as you can.. it helps loads.
IPv6 is starting to become a pain.. try it off and try local link and try auto.. in the computer.

My iPhone just loaded 1600 emails dating back over two years from one of my accounts. Is there a way to "mark all as read"?

My iPhone just loaded 1600 emails dating back over two years from one of my accounts. Is there a way to "mark all as read"?

Your Comcast accounts are POP (unless you enrolled in the Comcat Beta test of Imap) so they won't sync at all. Either enroll in the Beta test or don't use Comcast.
Your iCloud account is Imap and should sync just fine, unless you have set it up incorrectly.

My father's MAC is on Snow Leopard. Over the weekend his email forwarded over 400 emails dating back to 1969 and coould not delete form the MAC Anyone can help with 1. what is the problem 2. How to fix

My father's MAc is still on Snow Lepoard. Ovewr the weekend his Mail sent out over 400 emails to contacts. We were unable to delete the messages. 1. Does anyone know what the problem is 2. If so how can we fix it.
PB

Thanks. Will di immediately. Do you think I need to change the address as well or should just the password be sufficient.
PB

Hi I have 6 pending updates from the APP Store dating back to march 14. is there a problem?

My APP Store update have not downloaded since 14 March. When I try the message I get is unable to connect to App Store. Any suggestions please?

Try:
Can't connect to the iTunes Store

Audition 1.5 has problem playing back MT session if I have a ton of stretched clips

I might be doing something AA is not designed to do, I don't know. Perhaps (I wish) there are a lot easier ways of doing this, but I have a band that recorded, with a song that has 8 vocal tracks, singing as a group. However, they don't all start every word/phrase exactly at the same time, but should - therefore I use the clip stretching abilities in MT to cut the track up each place it's off and stretch it to fit. Normally I don't need to stretch it much at all, but after that tedious job is done the overall project sounds a lot better.
However, now I have this session that has maybe 150 stretched clips (pretty crazy, huh?) and it takes about 30 minutes or more to open. Problem is, now it won't play back decently for some reason; certain tracks sound like a bunch of garble and warble - nothing that can be made out. I do not know if all the stretched clips have anything to do with it. The wave files appear the same as before - example, you can see where a louder portion of audio is but it is nothing synced with what I hear on the speakers.
I should also mention that I had an under-rated computer run AA one time and the same thing happened there so I thought it just got tired and so I restarted AA and it worked fine after that. Here I also restarted AA but the problem is not better - worse if anything.
Some tracks play fine, others don't. Another thing of interest is that I have only stretched the vocal tracks; by far the worse garble is on the instrument tracks; they even play back as quirks and garble in Edit View if I go there.
Anyone have any solution why this happens? Am I over doing AA in some way?
Also, is there a more automated way of matching and syncing vocals? I'm talking about them being .1 - .01 seconds off the beat; is there some way AA will automatically stretch clips to match beats with - say - the beat markers?

I am not surprised at all by your reply!
I would do that, soon as I'm done with stretching/timing adjustment; thing was I was still 10 seconds from the end when it started acting up. But Just as a safe precaution in case it would do something like that I had already backed up a couple of times so thankfully I don't need to do it all over again!
So, you don't think that "set beat markers" (or something like that) can be locked to beats in MT? For example if I run the "Find and Mark" beats in EV and then use those beats to snap to the closest beat in MT, stretching the file as need be in order to get it there.. ? Maybe I'm dreaming out of this world.. Next time I'll have to force my clients to sing until they sing it dead on right!
Thanks for your response!

Hard drive died - multiple problems with backed up home folder

My friend called me when she started having some problems with her home iMac. After we did went through a myriad of troubleshooting items, I determined that her hard drive was failing and suggested she backup her home folder immediately to another drive. She copied her home folder over to her old Mac and took the iMac into the Apple Store for further diagnostics. Sure enough, her hard drive had failed and they replaced it for her.
She reinstalled Leopard and set it up with a new account. We tried using the Migration Assistant to copy her old home folder back over but because she copied it rather than using Time Machine, Migration Assistant doesn't see it as a viable home folder. I'm very comfortable using the Terminal since I support both Macs and Linux in my department so I logged in as root and copied over her folders to the new account. That generally worked but we now have a ton of permissions problems of which Disk Utility doesn't fix. I'd like to start fresh again from her backed up home folder. So my question is if I can't use Migration Assistant to move over her old home folder, how do you make OS X see her old home folder as a viable account? (I hope this makes sense.)
Thanks in advance!

I would suggest the following.
make a new temp admin account and get rid of the new account she made already. log in as the temp user and copy the old home folder from the external to /Users. then go to system preferences->accounts and make a new account with the same short user name as the name of her old home folder. It will say that a home directory by that name already exists and ask if you want to use it. say "yes". this should recreate that user and take care of all permissions issues.

Problem with backing up my FCPX file

Hi all,
my FCPX "library file" is 1.5 terrabyte and I can't back it up. Every time I try and do it, it stops after approximately 100 gigabytes (the HD I'm trying to copy it to has more than enough free space. It's between two 4TB G-raids with approximately 2GB free on each. My computer harddrive has 215GB free space). The file works just fine in terms of opening and working with but I can't back it up. This is really scary since I've already spent 4 months of work on this. Does anyone know of other ways it can be backed up other than just copying the library file to another harddrive? Or has anyone had the same problem and found a workaround to at least back up all the timelines?
It seems very strange to me it's all just an ENORMOUS file and no folders, editing files, etc to back up separately for security. Or have I missed something?
Thanks a lot in advance!
Best,
Chris

Hello again Tom and thanks for your help!
No, I didn't optimize any media though I've rendered proxies for all media. I have about 14TB of R3D footage on five external harddrives, it's a feature. The proxies and sound files which I copied to the library makes the library file that big. I can't consolidate all media, as far as I know, since I don't have a drive even close to the size of all the R3D footage.
In terms of copying I have only tried the good old "copy/paste" method. I have never used any of those programs you mentioned. Can those programs be used to copy certain files or will they copy an entire drive?
Will the automatic back-ups FCPX does every 15 minutes save my timelines if something would go wrong and the library file would dissappear? I don't fully understand how that back-up process works. I could always render new proxies, though it would take time, but re-editing all those timelines is a whole other thing. Important to note here is that I'm used to Premiere Pro and the "old" FCP which is why all of this is so confusing.
Thank you again!

Problem dating back to 06

Similar Messages

Maybe you are looking for