Problem: db link consume a lots of resources.
We have two production database for different purposes.
Same of our application use others database.
We are using Oracle Forms and reports prelimary database technology.
We are using DB link to integrate some of our application
Links consume a lost of resources.
We are using ORacle 10.1.2.2 each of our side.
We have 300 session because of links at both side.
We want to decrese this number.
How can we decrease links memory and CPU consumption.
İs there any alternative to use link in Oracle forms environment .
Thanks a lot.
I changed my message according to your recommendations.
maybe now anyone can give some recommendation to us ?
We have two production database for different purposes.
Same of our application use others database.
We are using Oracle Forms and reports prelimary database technology.
We are using DB link to integrate some of our application
Links consume a lost of resources.
We are using ORacle 10.1.2.2 each of our side.
We have 300 session because of links at both side.
We want to decrese this number.
How can we decrease links memory and CPU consumption.
İs there any alternative to use link in Oracle forms environment .
Thanks a lot.
Similar Messages
-
Mail consumes a lot of resources making the os unusable
I'm having a weird problem with Apple Mail: After launching, the program rapidly starts taking a lot of the system resources making it impossible to run any other program.
CPU utilization is very high, the Mail process takes around 2.5 Gb of RAM (real memory) and over 20 Gb of virtual memory.
The only thing Mail appears to be doing is updating it's cache.
What could be wrong? Besides using another mail client, what are my options?
Thanks.Hi eroussel,
I'd suggest to try the following for starters:
When launching Mail.app, try opening the mail activity monitor by going to Window --> Activity, or command-0. It should show you some detailed information on if anything is happening in the background in regards to talking to your mail server, smtp server, etc.
As Linc Davis said, try booting in Safe Mode and see if the same thing happens.
If the same thing happens in Safe Mode, try deleting the mail account (assuming you only have one) and re-create it again using the settings from your mail provider. Be sure to backup your computer first!!
While doing all of this, leave the Activity monitor up from both Mail.app and the Mac OS X system Activity Monitor.
Hope this helps point you in the right direction. -
Photoshop CS4 consumes a lot of resources
I'm running Photoshop CS4 on my HP qouad core 2.4Ghz, 4GB of RAM, and 10K RPM 150GB hard drive. For some reason Photoshop is really slow e.g. zoom in and out. Just by having Photoshop open, the CPU usage is above 30% all the time. Is this normal?
dave milbut wrote:
update your video drivers? applied the cs4 update?
Thanks for the suggestion. For now, updating the graphic card seems to do the trick. Photoshop runs much quicker and the CPU usage is less than 10%. -
My iphone 5s (7.1) has permanently the search icon, as if searching network. This affects the speed of email and consumes a lot of battery. This happens even with all applications closed. I have restored the iPhone but the problem persists. Does anyone have an idea of the solution?
Thanks!!Try to reboot the iPhone, if that doesn't help make a backup via iTunes, and restore the iPhone via iTunes.
Otherwise disable background refresh, and kill all apps -
WmiPrvSE.exe Consuming A Lot of RAM on 2012R2 DCs with SCOM Agent
Good afternoon,
I have three Windows Server 2012 R2 Domain controllers (AD DS, DNS, and DFS roles) and I'm running SCOM 2012 R2 Update Rollup 1 with all the latest management packs for Server 2012 R2, Active Directory, DNS, and DFS.
When I install SCOM agents on these DCs, a WmiPrvSE process starts consuming a lot of memory until it reaches around 512MB. At that point no one can RDP to the DCs, but we can enter-possession to get-process | sort ws and kill the offending WmiPrvSE.exe
process. When I uninstall the SCOM agent the server returns to normal.
Other Windows Server 2012 R2 servers in our environment don't have this problem. And when we had Windows Server 2012 (no R2) domain controllers this wasn't an issue. My assumption is one of the management packs are an issue.
I've seen other posts, but they are either related to older versions of Windows Server or not domain controllers.
These are all the features I have installed on the DCs:
Active Directory Domain Services
DNS Server
File and Storage Services
File and iSCSI Services
File Server
DFS Namespaces
DFS Replication
File Server Resource Manager
Storage Services
.NET Framework 3.5 Features
.NET Framework 3.5 (includes .NET 2.0 and 3.0)
.NET Framework 4.5 Features
.NET Framework 4.5
WCF Services
TCP Port Sharing
Group Policy Management
Remote Differential Compression
Remote Server Administration Tools
Role Administration Tools
AD DS and AD LDS Tools
Active Directory module for Windows PowerShell
AD DS Tools
Active Directory Administrative Center
AD DS Snap-Ins and Command-Line Tools
DNS Server Tools
File Services Tools
DFS Management Tools
File Server Resource Manager Tools
SMB 1.0/CIFS File Sharing Support
User Interfaces and Infrastructure
Graphical Management Tools and Infrastructure
Server Graphical Shell
Windows PowerShell
Windows PowerShell 4.0
Windows PowerShell 2.0 Engine
Windows PowerShell ISE
Windows Server Backup
WoW64 SupportI have ever seen somebody has similar problem when import DNS MP to DC. Check whether it is this situation.
Otherwise, Open Event Viewer to see if there are any useful info there.
Last, apply the Hotfix below.
http://support.microsoft.com/kb/2919355
Juke Chou
TechNet Community Support -
Why Firefox Has Spikes In CPU Usage And Consumes A Lot Of RAM Since Security Update?
After applying security update 3.6.18 i started having this problem. I had this problem earlier but it only happened after several days Firefox was opened constantly. Now i have this problem several hours later after launching Firefox.
[http://i.stack.imgur.com/PJmH5.png '''Here is a picture of high RAM usage''']
'''[http://i.stack.imgur.com/tjsqt.png Here is a picture of high RAM and CPU usage]'''
I have Flash disabled.
What is going on? Should i reinstall Firefox 3.6.18?Have you any particular reason for using an older version of Firefox.
Whilst I rarely use firefox 3.6 now, and do not know the answer I will comment that the now unsupported firefox 4 did have bad memory problems in some cases. Some of those problems were addressed in firefox 5, and others are addressed in Firefox 7, which is due out on the Aurora channel next week.
You could consider upgrading to a newer version of firefox. If you need firefox3.6 only for limited use you could consider using Firefox portable, alongside a newer version of Firefox.
* portable: http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
* see also
**[[installing a previous version of firefox]]
**[[high memory usage]]
**[[firefox consumes a lot of CPU resources]] -
Why Firefox 5.0 Still Consumes A Lot Of RAM?
Contrary to many statements that Firefox 5.0 is RAM optimized and uses less, i still have Firefox eating '''[http://i.stack.imgur.com/i1AgT.png almost ~800MB of RAM and mapping more]'''.
I used command:
''about:memory''
And was presented with a modules/extension tree and i don't understand what each means. Does anybody here have experience or knowledge about this here who could tell me where may be the problem?Have you any particular reason for using an older version of Firefox.
Whilst I rarely use firefox 3.6 now, and do not know the answer I will comment that the now unsupported firefox 4 did have bad memory problems in some cases. Some of those problems were addressed in firefox 5, and others are addressed in Firefox 7, which is due out on the Aurora channel next week.
You could consider upgrading to a newer version of firefox. If you need firefox3.6 only for limited use you could consider using Firefox portable, alongside a newer version of Firefox.
* portable: http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
* see also
**[[installing a previous version of firefox]]
**[[high memory usage]]
**[[firefox consumes a lot of CPU resources]] -
Report RSXMB_RESTART_MESSAGES needs a lot of resources
Hi,
we are using PI 7, SPS9.
When we have a heavy load in XI, we are getting sometimes JavaNullPointer-Exceptions in Java-mappings, so we have to restart these messages - no problem!
There is the report RSXMB_RESTART_MESSAGES to restart failed messages, but when I defined it as a job (every 1 hr) and during this time we have a lot of messages (but only some are failed), the job never ends and it needs a lot of resources!
In the queues I can see a lot of entries made by the report.
Our report still have the field "max restarts" and I entered 5 restarts!
What can I do?
Thanks a lot!
regards
Wolfgang HummelHi Sandro,
thanx for your answer.
This is a test system and at the moment I just defined jobs for deleting and not for archiving.
My problem is, that we have a sender with thousands of messages via the same interface for the same receiver and sometimes a message failed ('cause of NullPointerException in java mapping).
To define a filter in the report RSXMB_RESTART_MESSAGES is no solution 'cause the filter cannot reduce the number of messages (it's always thousands of messages).
When the job starts during less traffic, I don't have any problems - it's just a problem during heavy traffic.
regards
wolfgang -
My mac book air consuming a lots of data per hour ... Even if am not browsing too it's automatically consuming ...how can I stop it ? It's losing like 1 GB per hour ...kindly help me to recover it ...I am new to mac book air ...thank u
I think you mean that it's using network bandwidth.
Any client on a wireless network, including clients you don't know about, could be consuming bandwidth. Networks must be protected with WPA2 security. If yours isn't, change the security setting on the access point. If it's already set that way, change the password. Make it a string of at least 8 random characters, including digits and upper- and lower-case letters. The password is saved in the keychain and you don't have to be able remember it; in fact, you shouldn't be able to remember it.
You make these changes in AirPort Utility, if the access point is an Apple device, or in a web browser otherwise.
If the network or the password was insecure, and bandwidth use returns to normal after securing it, you can be pretty sure the problem was caused by intruders.
But intrusion may not be the issue. Most often BitTorrent, iCloud or some other cloud-data application is involved in cases of mysterious bandwidth use by a Mac. If you use iCloud, uncheck at least Photo Stream and Documents & Data in its preference pane and see whether there's any change. If you use third-party network backup software, disable that. If you use a torrent client, remove it.
Otherwise, there's no easy way to monitor network usage per process using built-in tools. If you're an advanced user and you want to try, see the manual page for the nettop(1) shell command. It may or may not provide the information you're looking for.
The third-party products Rubbernet and Little Snitch are supposed to record network usage by processes. I can't vouch for them. Both were available as free trials, the last time I checked. I suggest you uninstall either one when the question has been answered. -
Quicklook consumes a lot of memory on column view previewing large files
After upgrading to Mountain Lion, everytime I click on a large file (like a disk image, DMG, ISO) on finder's column view, it starts spinning the icon and quicklookd consumes a lot of memory even causing other apps to swap to disk. After the preview icon is done, the quicklookd memory is dealocated.
This do not happen on Lion.Just found out that a plugin (QLStephen - http://whomwah.github.com/qlstephen/) was causing the problem.
Removed it from /Library/Quicklook, restarted quicklook (qlmanage -r) and the problem is gone. -
Problem with links on email templates
Problem with links on email templates
Hi,
We have been having issues with links on our email templates. Some of the links point to the following URL:
http://server'sname/thirdparty/FCKeditor/editor/fckeditor.html?InstanceName=emailTemplatesDTO.htmlBody&Toolbar=NewscaleFCKEditorToolBar#URL
Sometimes we get “Unknown internal error” on the web page.
Can anyone help or advise on how to resolve this issue?
Many thanks,
Wesley.Hi Wesley,
This is rather late, but we've seen the same thing frequently (and I believe can replicate it). It's caused when you a creating a new email by copying the content of an existing one with a name space in it.
Upon copying, the link gets scrambled. The approach we use is to copy the email in to a new template, then strip out all of the URL links and add them back in.
Thanks!
Ant -
Problem with links for external user
Hi,
We´re using SAP NetWeaver Portal 2004s SPS 10 and we have a problem with links within notification-mails:
The link to the document (e.g. within a subscription mail) consists of "http:///...". Only user using the portal within our network can open this links. All external user can´t open this links. How can I change the URL so that our external user can open the links, too?
Thanks for help,
Sven KellerWe already have another URL for external usage. My problem is how to define that created links to documents and folder are automatically using the external URL.
If somebody receives an email (e.g. subscription) the URL to the folder is:
http://<portalserver>:51000/irj/go/km/navigation/documents/Public Documents/Documentation
But it should be:
https://<externalportal>/irj/go/km/navigation/documents/Public Documents/Documentation
Message was edited by:
Sven Keller -
Indesign CS6 on MACs with OS 10.8 are having problems with links
Hi
Indesign CS6 on MACs with 10.8 are having problems with links. All links to other files have to be updated when opening a file although definitely nothing has changed to the linked files.
We can rule out our company's networking and the system hosting the files (HELIOS software on RedHat Linux VM). This happens with newly created Indesign files and with old ones. E.g. we create a file on Tuesday, save it and open it again on the exact same MAC on Wednesday and all links to other fiels (.indd, .png, .bmp, etc. nothing uncommon) have to be updated as they all show the yellow triangle + black exclamation mark symbol next to them. Has anybody else experienced this, What can we do? We have tried absolutley everything and updated all software from MAC OS to CS6 itself but nothing seems to help on the long run.
Any further information required?
M. MillerThanks for your quick reply.
We actually noticed that there also seems to be something wrong with the timestamps:
If we open the infos via the MAC finder to a file (.psd e.g.) which is linked in one of our indesign files, it states a certain date of creation.
If we then switch to the Indesign file we just opened in which we had to update all links and open the infos to exactly the same file we looked at in the finder, a different date of creation is stated. So there also seems to be a mistake here (hope it's clear what I mean).
We are ruling out our network as the error cannot be "re-enacted". We have created numerous test files in Indesign (simple white page containing one link to a .psd file which is also used in one of the supposedly defective files) and have opened them on various MACs with various OS versions over the past days/weeks but unfortunately the files open without any notifications or errors.
Just as a background: a few months ago, the problem seemed to occur between MACs with differing OS, 10.6 - 10.8 at first. A file which was created on a 10.6 MAC could not be opened without updating all links on a 10.8 MAC. That is why we updated everything to 10.8. The error did not occur for about 2-3 weeks but then reoccured again.?
Have you heard anything similar? -
SQL Developer consumes a lot of memory
Sql developer consumes a lot of RAM (around 100 MB) few minutes after start of application . any tips to reduce this?
This is usually due to the caching of database objects on support of code insight and is dependent on the number of objects in the database. As documented in the readme.txt in the sqldeveloper home directory, you can disable code insight.
2.1 To disable Code Insight
Run SQL Developer from a command line using the following statement:
Windows : sqldeveloper -J-Dsdev.insight=false
Linux or Mac: Run sh sqldeveloper -J-Dsdev.insight=false
or edit sqldeveloper.conf and add "AddVMOption -J-Dsdev.insight=false" -
Sessions that consume a lot of Memory
Hi,
How to retrieve sessions that consume a lot of Memory (Database 11.2.0.2) ?
Regards,791550 wrote:
Hi,
How to retrieve sessions that consume a lot of Memory (Database 11.2.0.2) ?
Regards,Hi. You can query v$sesstat,v$statname and can join with v$session then you will get which session consume how much memory like below query
select
username,
sess.sid,
value,
name
from v$sesstat sst,
v$statname sn,
v$session sess
where sst.statistic#=sn.statistic# and
sess.sid=sst.sid and
username is not null and
upper(sn.name) like '%MEMORY%'
order by username
Maybe you are looking for
-
I have had this problem since changing over to I Cloud and I thank you in advance for helping me with this...Cappuccini (Wayne).
-
Is an AppleTV and Wireless Router Needed for Mirroring Screen?
Is an AppleTV and a Wireless Router Needed for Mirroring from a desktop monitor to an HDTV?
-
Creating sandboxes with the admin api
I'm trying to write some code that creates sandboxes through the admin api. For these sandboxes, I want to only enable a specific set of functions. Unfortunately, when you create a sandbox with getSecuritySandboxes, it enables all functions by defaul
-
My phone will not turn off, has not done so for ages, Today I tried to upgrade which failed . Now my screen shows only the itunes symbol and a usb lead. When I connect to itunes it informs me the sim card is not supported though it works on other pho
-
Is there anyway to read the unscaled voltage from a scaled virtual channel?
I am using DAQmx to read voltage from a SCXI chassis. Programmically in Labview I created a task with virtual channels and custom scales. Later in the program, I wish to view the scaled volatge and the raw voltage at the same time. Is there a propert