Problem deinstalling 10.2.0.2
Hi,
I installed and later on deinstalled 10.2.0.2 OMS, agent, and respository database by using the Oracle installer. In Oracle installer, I selected the db10g, oms10g, agent10g, and then clicked remove. The message came back as successful, but somehow, I could not remove the oms10g directory. It shows that some of the files are in use. Now I cannot reinstall 10.2.0.2 OMS in the same directory because the installer thinks there is already an OMS.
Has anyone encountered this before? Any suggestions?
Thank you very much for your help.
I'm trying to manually delete the oms10g directory. Most of the files are removed except for the *.jar files. When I try to delete them, the system displays messages say that they are in use by other programs. I haven't been able to figure out what is using them, since all the oracle services have been shutdown (OracleService, dbconsole, agent, listener, job scheduler).
hi,
what you can do it manually delete the oms directory tree and then when you are in OUI click on empty homes. You should then be able to remove the empty home and then perform a new install.
What O/S are you using?
rgds
Alan
Similar Messages
-
Save as Adobe PDF opens the wrong installation of AA
Hi all,
I bought an Adobe CC membership and after a month I found out that my apps were expiring. I accidentally set CC on Dutch (native language) but I ordered the English version. No problem, deinstalled all the apps and reinstalled them in the English version. Everything seems to work, almost.
When I'm using MS word 2010 and I want to save my document as a PDF file (Save as Adobe PDF), it opens the dialog that I have zero days left and have to fill in my serial number, in Dutch!
I can only cancel this screen, since I don't have the Dutch version of CC. If I try again I get the following error in Word.
I deinstalled and reinstalled Adobe Acrobat XI now about 5 times, but it is still not working. How can I point PDFmaker to the right Acrobat?Hi Rave,
Thanks for the link. I tried them out but still no luck. When I press Save to PDF it opens the English version of Acrobat and this Dutch activation screen, after that I only get the alert and the activation screen. So I can save one pdf document and then I've to reinstall Acrobat. It's activated, but only the English version, somewhere on my pc there is still some leftover from the Dutch version.
greetz
Maarten -
How do I re-update my walkman app?
In the app setting screen there is an option of deleting the walkman app's update.
After deleting that update, I am now stuck with the older version of the app. Is there a way for me to re-update to the
newest version? Repairing my phone through the companion software on pc does not seem to help.OK now I tried myself and contacted local (German) support.
Described the problem (deinstalled update of Walkman, also outdated versions of Album and Movies, for all of them Update Center not showing the latest versions).
First instruction to solve was to stop the Update Center app and remove data and cache then reboot the phone. I did that already twice but for the sake of doing it I did it again and of course it did not help . Which I told the guy from support.
He then told me he was sorry but I had to download the apk files from the internet and install them myself. I asked if I should share this recommendation as support solution and he agreed to that. So here you are (strange they don't even offer to send or download the apk files...)
Finally I asked if I would be receiving incremental update notifications via Update Center which he confirmed. I will come back on that once we know there are newer versions we don't get notified about...
Cheers -
Can't uninstall creative software - please he
Hi all,?I tried out the Zen V Plus and decided on another mp3 player - now I can't remove creatives software from my system. Nothing from creative shows up under add remove programs (I used that to remove the creative stuff first, it didn't work though)?When I click on my computer, I see the Zen V Plus media explorer listed under the "other" tab- I can right click on it but it wont run, and there is no option to uninstall it?Also, on my desktop I still show the ZenCast organiser. I can delete the shortcut, but Zencast organiser does not show in add remove and there seems to be no uninstall program in the creative folder - I've tried starting in clean boot and safe mode and just deleting the Creative folder under Crogram files/creative - but that doesn't work, I get access denied message due to running DLL files. I've tried going into msconfig and the files in question are not present - I've emailed tech support and they have been less than helpfull. They say it's a problem with windows. I think it's a creative problem- it's their software afterall. If anyone knows any tricks or methods to get rid of this stuff please help!?The only thing I can think of would be to get the original install disk, install everything again, then try to uninstall using the original disk- (sometimes they have that option) but I have no idea where or how to get a disk short of going to bestbuy, buying a Zen Plus and then using the disk and returning the whole thing. I really would like to avoid that if possible. Also, when I click start, all programs, I do have a creative folder, I can then click creative Zen V Series (R2) - and I have an "uninstall creative media explorer- but when I click it nothing happens. thanks - Jake
Too bad you did not like zen v, i like it and want to upgrade my muvo to this, eventually
I have installed the stuff you talk about multiple times and did not have problems deinstalling.
You can either go into registry (back it up before doing do) and delete all creative/zen entries or you can try to install all software again, reboot, start in safe mode, deinstall all.
Good Luck. -
Clicking anywhere on one monitor loses the active window in the other monitor
Windows XP Pro, two monitor setup which has worked without issue for well over a year. Still works, with the following quirk: Suppose I am sending an email and I wish to attach pix which I am selecting from Windows Explorer (not Internet Explorer) on the left side and my email front end on the right side. I have a few other windows open on the right side, in the background. I am just picking photos shown on the left monitor to attach to the email I am working on in the right monitor. Simple.
The email front end is on top of any open windows on the right. When I click on the left screen, the right screen (apparently) reverts to whichever window it thinks is "most important"...but in any event, the desired target window goes away so there is no place to drag & drop the pic to. UNLESS, of course, my target window (the email front end in this case) is the "most important" window but there is no way (that I know of) to achieve that or to know in advance whether it is or is not....>>THAT<< being able to "pin" a particular window as "topmost" or "topmost until I change it" would solve the problem as far as I'm concerned. Yet I have never had to do anything like this before. Got something going on the right hand screen? Go to the left screen? Why should anything I do on the left influence what I am doing or what I am seeing on the right? It shouldn't. When I leave one screen, it should stay just how I left it.
Likewise, if I have a piece of stock tracking software running in a window on the right and Excel on the left side, when I click anywhere on Excel, the stock-tracking window goes away and reverts to some other window which (I guess) must be "more important". I would somehow need to be able to designate whatever window I am working on on the right screen as "most important"....this would fix the problem. But again, I have never had to do this before. Go work on the other screen, and the screen you left remains as it was. (How could you work if it was different??)
And by the way, it appears to work the other way (excel on right, stock-screener on left, or....WDOs Explorer on right, email on left.)
Frustrating and non-productive. It never did this in the year or more I've been using the same hardware. Dumb 5-year old hp desktop. I recently replaced my hard drive. I know I updated FF some months ago but this problem is much newer than "months ago"...it just started to occur about a week or so ago! It's quite the PITA.I FIXED this problem: DEinstall Firefox, REinstall Firefox. Done.
-
Removing Oracle Database Enterprise Edition Release 11.2.2.0 on linux 5
I have installed Pre-Built Developer-VM (for Oracle VM VirtualBox) named Database App Development VM, including Oracle Database 11g Release 2 Enterprise Edition.
VirtualBox VMs for Developers</title><meta name="Title" content="VirtualBox VMs for Developers&q…
I would like to remove Oracle Database Enterprise Edition Release 11.2.2.0 on linux 5, but I am getting the error "command not found".
[oracle@localhost ~]$ cd $ORACLE_HOME
[oracle@localhost dbhome_2]$ cd deinstall
[oracle@localhost deinstall]$ ls -ltr
-rwxr-xr-x 1 oracle oracle 32343 Dec 16 2009 sshUserSetup.sh
-rw-r--r-- 1 oracle oracle 489 Nov 16 2009 readme.txt
-rw-r--r-- 1 oracle oracle 3466 Mar 19 2010 deinstall.xml
-rwxr-xr-x 1 oracle oracle 9369 Jun 10 2010 bootstrap.pl
-rwxr-xr-x 1 oracle oracle 14776 Jul 15 2010 deinstall.pl
drwxr-xr-x 2 oracle oracle 4096 Oct 2 2010 response
drwxr-xr-x 2 oracle oracle 4096 Oct 2 2010 jlib
-rwxr-xr-x 1 oracle oracle 8474 Oct 2 2010 deinstall
[oracle@localhost deinstall]$ ./deinstall
Checking for required files and bootstrapping ...
Please wait ...
./deinstall: line 217: ERROR:: command not found
Does anybody have an idea?Hello Asif,
I opened deinstall.pl with vi and jumped to line 217. There is nothing in line 217. Its the end of file. In line 216 is the following command:
$TOOL_DIR/perl/bin/perl $TOOL_DIR/deinstall.pl $HOME_VER $TEMP_LOC $TOOL_DIR $ARCHITECTURE_FLAG $TOOL_ARGS
I cannot find the problem.
deinstall.pl
# $Header: install/utl/scripts/db/deinstall /main/3 2010/05/28 20:12:57 ssampath Exp $
# Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
# NAME
# deinstall - wrapper script that calls deinstall tool.
# DESCRIPTION
# This script will set all the necessary variables and call the tools
# entry point.
# NOTES
# <other useful comments, qualifications, etc.>
# MODIFIED (MM/DD/YY)
# mwidjaja 04/29/10 - XbranchMerge mwidjaja_bug-9579184 from
# st_install_11.2.0.1.0
# mwidjaja 04/15/10 - Added SHLIB_PATH for HP-PARISC
# mwidjaja 01/14/10 - XbranchMerge mwidjaja_bug-9269768 from
# st_install_11.2.0.1.0
# mwidjaja 01/14/10 - Fix help message for params
# ssampath 12/24/09 - Fix for bug 9227535. Remove legacy version_check
# function
# ssampath 12/01/09 - XbranchMerge ssampath_bug-9167533 from
# st_install_11.2.0.1.0
# ssampath 11/30/09 - Set umask to 022.
# prsubram 10/12/09 - XbranchMerge prsubram_bug-9005648 from main
# prsubram 10/08/09 - Compute ARCHITECTURE_FLAG in the script
# prsubram 09/15/09 - Setting LIBPATH for AIX
# prsubram 09/10/09 - Add AIX specific code check java version
# prsubram 09/10/09 - Change TOOL_DIR to BOOTSTRAP_DIR in java cmd
# invocation of bug#8874160
# prsubram 09/08/09 - Change the default shell to /usr/xpg4/bin/sh on
# SunOS
# prsubram 09/03/09 - Removing -d64 for client32 homes for the bug8859294
# prsubram 06/22/09 - Resolve port specific id cmd issue
# ssampath 06/02/09 - Fix for bug 8566942
# ssampath 05/19/09 - Move removal of /tmp/deinstall<timestamp> to java
# code.
# prsubram 04/30/09 - Fix for the bug#8474891
# mwidjaja 04/29/09 - Added user check between the user running the
# script and inventory owner
# ssampath 04/29/09 - Changes to make error message better when deinstall
# tool is invoked from inside ORACLE_HOME and -home
# is passed.
# ssampath 04/15/09 - Fix for bug 8414555
# prsubram 04/09/09 - LD_LIBRARY_PATH is ported for sol,hp-ux & aix
# mwidjaja 03/26/09 - Disallow -home for running from OH
# ssampath 03/24/09 - Fix for bug 8339519
# wyou 02/25/09 - restructure the ohome check
# wyou 02/25/09 - change the error msg for directory existance check
# wyou 02/12/09 - add directory existance check
# wyou 02/09/09 - add the check for the writablity for the oracle
# home passed-in
# ssampath 01/21/09 - Add oui/lib to LD_LIBRARY_PATH
# poosrini 01/07/09 - LOG related changes
# ssampath 11/24/08 - Create /main/osds/unix branch
# dchriste 10/30/08 - eliminate non-generic tools like 'cut'
# ssampath 08/18/08 - Pickup srvm.jar from JLIB directory.
# ssampath 07/30/08 - Add http_client.jar and OraCheckpoint.jar to
# CLASSPATH
# ssampath 07/08/08 - assistantsCommon.jar and netca.jar location has
# changed.
# ssampath 04/11/08 - If invoking the tool from installed home, JRE_HOME
# should be set to $OH/jdk/jre.
# ssampath 04/09/08 - Add logic to instantiate ORA_CRS_HOME, JAVA_HOME
# etc.,
# ssampath 04/03/08 - Pick up ldapjclnt11.jar
# idai 04/03/08 - remove assistantsdc.jar and netcadc.jar
# bktripat 02/23/07 -
# khsingh 07/18/06 - add osdbagrp fix
# khsingh 07/07/06 - fix regression
# khsingh 06/20/06 - fix bug 5228203
# bktripat 06/12/06 - Fix for bug 5246802
# bktripat 05/08/06 -
# khsingh 05/08/06 - fix tool to run from any parent directory
# khsingh 05/08/06 - fix LD_LIBRARY_PATH to have abs. path
# ssampath 05/01/06 - Fix for bug 5198219
# bktripat 04/21/06 - Fix for bug 5074246
# khsingh 04/11/06 - fix bug 5151658
# khsingh 04/08/06 - Add WA for bugs 5006414 & 5093832
# bktripat 02/08/06 - Fix for bug 5024086 & 5024061
# bktripat 01/24/06 -
# mstalin 01/23/06 - Add lib to pick libOsUtils.so
# bktripat 01/19/06 - adding library changes
# rahgupta 01/19/06 -
# bktripat 01/19/06 -
# mstalin 01/17/06 - Modify the assistants deconfig jar file name
# rahgupta 01/17/06 - updating emcp classpath
# khsingh 01/17/06 - export ORACLE_HOME
# khsingh 01/17/06 - fix for CRS deconfig.
# hying 01/17/06 - netcadc.jar
# bktripat 01/16/06 -
# ssampath 01/16/06 -
# bktripat 01/11/06 -
# clo 01/10/06 - add EMCP entries
# hying 01/10/06 - netcaDeconfig.jar
# mstalin 01/09/06 - Add OraPrereqChecks.jar
# mstalin 01/09/06 -
# khsingh 01/09/06 -
# mstalin 01/09/06 - Add additional jars for assistants
# ssampath 01/09/06 - removing parseOracleHome temporarily
# ssampath 01/09/06 -
# khsingh 01/08/06 - fix for CRS deconfig
# ssampath 12/08/05 - added java version check
# ssampath 12/08/05 - initial run,minor bugs fixed
# ssampath 12/07/05 - Creation
#MACROS
if [ -z "$UNAME" ]; then UNAME="/bin/uname"; fi
if [ -z "$ECHO" ]; then ECHO="/bin/echo"; fi
if [ -z "$AWK" ]; then AWK="/bin/awk"; fi
if [ -z "$ID" ]; then ID="/usr/bin/id"; fi
if [ -z "$DIRNAME" ]; then DIRNAME="/usr/bin/dirname"; fi
if [ -z "$FILE" ]; then FILE="/usr/bin/file"; fi
if [ "`$UNAME`" = "SunOS" ]
then
if [ -z "${_xpg4ShAvbl_deconfig}" ]
then
_xpg4ShAvbl_deconfig=1
export _xpg4ShAvbl_deconfig
/usr/xpg4/bin/sh $0 "$@"
exit $?
fi
AWK="/usr/xpg4/bin/awk"
fi
# Set umask to 022 always.
umask 022
INSTALLED_VERSION_FLAG=true
ARCHITECTURE_FLAG=32
TOOL_ARGS=$* # initialize this always.
# Since the OTN and the installed version of the tool is same, only way to
# differentiate is through the instantated variable ORA_CRS_HOME. If it is
# NOT instantiated, then the tool is a downloaded version.
# Set HOME_VER to true based on the value of $INSTALLED_VERSION_FLAG
if [ x"$INSTALLED_VERSION_FLAG" = x"true" ]
then
ORACLE_HOME=/home/oracle/app/oracle/product/11.2.0/dbhome_2
HOME_VER=1 # HOME_VER
TOOL_ARGS="$ORACLE_HOME $TOOL_ARGS"
else
HOME_VER=0
fi
# Save current working directory
CURR_DIR=`pwd`
# If CURR_DIR is different from TOOL_DIR get that location and cd into it.
TOOL_REL_PATH=`$DIRNAME $0`
cd $TOOL_REL_PATH
DOT=`$ECHO $TOOL_REL_PATH | $AWK -F'/' '{ print $1}'`
if [ "$DOT" = "." ];
then
TOOL_DIR=$CURR_DIR/$TOOL_REL_PATH
elif [ `expr "$DOT" : '.*'` -gt 0 ];
then
TOOL_DIR=$CURR_DIR/$TOOL_REL_PATH
else
TOOL_DIR=$TOOL_REL_PATH
fi
# Check if this script is run as root. If so, then error out.
# This is fix for bug 5024086.
RUID=`$ID|$AWK -F\( '{print $2}'|$AWK -F\) '{print $1}'`
if [ ${RUID} = "root" ];then
$ECHO "You must not be logged in as root to run $0."
$ECHO "Log in as Oracle user and rerun $0."
exit $ROOT_USER
fi
# DEFINE FUNCTIONS BELOW
computeArchFlag() {
TOOL_HOME=$1
case `$UNAME` in
HP-UX)
if [ "`/usr/bin/file $TOOL_HOME/bin/kfod | $AWK -F\: '{print $2}' | $AWK -F\- '{print $2}' | $AWK '{print $1}'`" = "64" ];then
ARCHITECTURE_FLAG="-d64"
fi
AIX)
if [ "`/usr/bin/file $TOOL_HOME/bin/kfod | $AWK -F\: '{print $2}' | $AWK '{print $1}' | $AWK -F\- '{print $1}'`" = "64" ];then
ARCHITECTURE_FLAG="-d64"
fi
if [ "`/usr/bin/file $TOOL_HOME/bin/kfod | $AWK -F\: '{print $2}' | $AWK '{print $2}' | $AWK -F\- '{print $1}'`" = "64" ];then
ARCHITECTURE_FLAG="-d64"
fi
esac
if [ $HOME_VER = 1 ];
then
$ECHO "Checking for required files and bootstrapping ..."
$ECHO "Please wait ..."
TEMP_LOC=`$ORACLE_HOME/perl/bin/perl $ORACLE_HOME/deinstall/bootstrap.pl $HOME_VER $TOOL_ARGS`
TOOL_DIR=$TEMP_LOC
else
TEMP_LOC=`$TOOL_DIR/perl/bin/perl $TOOL_DIR/bootstrap.pl $HOME_VER $TOOL_ARGS`
fi
computeArchFlag $TOOL_DIR
$TOOL_DIR/perl/bin/perl $TOOL_DIR/deinstall.pl $HOME_VER $TEMP_LOC $TOOL_DIR $ARCHITECTURE_FLAG $TOOL_ARGS
Best regards -
[Problem with U310 and W8] Deinstalled my WuDFRd-Drivers
Hey,
i just set up my new u310 with windows 8 and it worked fine. Then i realised, that on startup it takes about 4-10 minutes to search for wifi and i began struggeling around with things... deinstalled some drivers, reinstalled them again, just to see which drivers collide because the wifi service didnt start on startup.
Then i saw a message on my system which was timed around the startup time and it said "The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000.". I looked it up on the internet and i saw that few people had the same problems with the long startup and similar things... so i just deinstalled the "Windows Driver Package - Lenovo WuDFRd Drivers" to reinstall a newer version or something like that.... but problem is, Where can i find this Driver package? I just cant find it. Will the startup problem be solved with a new installation of these drivers? Please help meThank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there. -
was just loading indesign and cannot start it. seem to have no rights for some presets. i deinstalled and installed new, same problem. who can help?
Not easy if vital information is missing. Sometimes it seems like people are using the internet the first time...
What version of Indesign?
What OS? "Rights" sounds like Windows
What is happening when starting it?
If Windows, where was it installed?
If Windows, do you have admin permissions? -
Hey everybody,
even though I have repaired, deinstalled and reinstalled itunes, the assitent still tells me that I can't burn or import music due to an incomplete installation... I have been using itunes for years now and never had a problem...who can help??? thxcheck out this support article.
-
Problem with deactivating / deinstalling filevault
I have had filevault on my main user account. Due to problems with disappearing sidebar folders described elsewhere, I created a new admin account and moved all of my data to this account. I have not essentially emptied the old account, logged out to recover space and I now want to deactivate Filevault in the old account. But the process halts with an error message and in the console system log this string is found:
athrxproc: NO RX Packets for 5 contiguous interrupts first DS Vaddr 0x4f36c000 Paddr 0x8da5000
Any hints on what to do?thrxproc: NO RX Packets for 5 contiguous interrupts first DS Vaddr ...
Turning off Appletalk fixed those entries in my system log (it was enabled unknowingly on airport and the built-in ethernet) and sped up the log in well...
I'm not sure on the constant dropping, but I've been experiencing that, and will report back if turning apple talk off improved that situation too.
thought I'd share as google brought me to this thread too..
Edd -
I could not delete vshare from Firefox, and now I cannot deinstall Firefox and reinstall it from my pc.
nt want to have to sit and go through my whole camera roll deleting my pictures.
So you do not want to keep any of the pictures you took with your iPhone 5?
Settings > General > Usage - Photos & Camera.
Swipe across Camera roll then tap Delete. -
Problem while deinstalling the SOA
Hi,
when i am trying to Deinstall the SOA from my machine, it through following error message
Java Virtual machine Launcher "Could Not found the main Class, Program will exit"
help me how to resolve this...
or
can any one suggest the proper way to Deinstall the SOA.
Regards:-
BKumarNot sure from your post what method you used but there is a deinstall.sh or deinstall.exe in your SOA_HOME/bin. If you are on windows you will see deinstall from the menu. This is the easiest way to deinstall.
If this fails fire up runInstaller that you used to install SOA Suite and choose to deinstall from there. You do this by selecting installed products.
cheers
James -
Installation problem on Windows 7 64
I have downloaded the archived folders win64_11gR2_database_1of2 and win64_11gR2_database_2of2, combined the contents, and ran the setup.exe program. The Installer program loads and is brought up successfully, and I can select "create and configure a database" and click next. Now, I am asked to select the "Desktop Class" or "Server Class". I select "Desktop Class" but when I hit next, the Installer program just exits. I have tried this dozens of times, rebooted the machine, and have not been able to resolve this. My machine meets the requirements of this software, and I have actually installed 11g on this machine before successfully, but deinstalled it. I have a feeling this is not a common problem but I am at a loss as to how to resolve this. Any advice? Thank you.
Here are the last 100 lines in the file installActions2012-11-01_02-11-13PM.txt:
INFO: Launching Oracle Database 11g Release 2 Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state prepInstall
INFO: Waiting for completion all forked tasks at state prepInstall
INFO: All forked task are completed at state prepInstall
INFO: Completed background operations
INFO: Executing action at state prepInstall
INFO: Completed executing action at state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prepInstall>
INFO: Completed validating view at state <prepInstall>
INFO: Validating state <prepInstall>
WARNING: Validation disabled for the state prepInstall
INFO: Completed validating state <prepInstall>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state decideOCMInstall
INFO: Completed executing action at state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <decideOCMInstall>
INFO: Completed validating view at state <decideOCMInstall>
INFO: Validating state <decideOCMInstall>
WARNING: Validation disabled for the state decideOCMInstall
INFO: Completed validating state <decideOCMInstall>
INFO: Verifying route requireOCM
INFO: Get view named [OCMDetailsUI]
INFO: View for [OCMDetailsUI] is oracle.install.ivw.common.view.OCMDetailsGUI@1ee99d0f
INFO: Initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOCMDetails
INFO: Completed executing action at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOCMDetails>
INFO: Completed validating view at state <getOCMDetails>
INFO: Validating state <getOCMDetails>
SEVERE: You have not provided an email address.
Do you wish to remain uninformed of critical security issues in your configuration?
INFO: Completed validating state <getOCMDetails>
INFO: Verifying route success
INFO: Get view named [InstallOptionsUI]
INFO: InstallOptionsUI Entering Constructor
INFO: InstallOptionsUI Exiting Constructor
INFO: View for [InstallOptionsUI] is oracle.install.ivw.db.view.InstallOptionsUI@718ddc48
INFO: Initializing view <InstallOptionsUI> at state <installOptions>
INFO: Completed initializing view <InstallOptionsUI> at state <installOptions>
INFO: Displaying view <InstallOptionsUI> at state <installOptions>
INFO: Completed displaying view <InstallOptionsUI> at state <installOptions>
INFO: Loading view <InstallOptionsUI> at state <installOptions>
INFO: Completed loading view <InstallOptionsUI> at state <installOptions>
INFO: Localizing view <InstallOptionsUI> at state <installOptions>
INFO: Completed localizing view <InstallOptionsUI> at state <installOptions>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state installOptions
INFO: Completed executing action at state <installOptions>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <installOptions>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: InstallOptions UI Entering & Exiting processInput
INFO: Validating view at state <installOptions>
INFO: Completed validating view at state <installOptions>
INFO: Validating state <installOptions>
INFO: Completed validating state <installOptions>
INFO: InstallOptionsAction Actions.transition called
INFO: selectedInstallOption is :INSTALL_DB_AND_CONFIG
INFO: launchNETCA = true
INFO: Verifying route system_class
INFO: Get view named [SystemClassUI]
INFO: SystemClassUI Entering Constructor
INFO: SystemClassUI Exiting Constructor
INFO: View for [SystemClassUI] is oracle.install.ivw.db.view.SystemClassUI@43a544a5
INFO: Initializing view <SystemClassUI> at state <getSystemClass>
INFO: Completed initializing view <SystemClassUI> at state <getSystemClass>
INFO: Displaying view <SystemClassUI> at state <getSystemClass>
INFO: Completed displaying view <SystemClassUI> at state <getSystemClass>
INFO: Loading view <SystemClassUI> at state <getSystemClass>
INFO: Completed loading view <SystemClassUI> at state <getSystemClass>
INFO: Localizing view <SystemClassUI> at state <getSystemClass>
INFO: Completed localizing view <SystemClassUI> at state <getSystemClass>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getSystemClass
INFO: Completed executing action at state <getSystemClass>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getSystemClass>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: SystemClassUI Entering & Exiting processInput
INFO: Validating view at state <getSystemClass>
INFO: Completed validating view at state <getSystemClass>
INFO: Validating state <getSystemClass>
INFO: Completed validating state <getSystemClass>
INFO: selectedSystemClass is :DESKTOP_CLASS
INFO: Verifying route desktop_class_yes
INFO: Get view named [QuickInstallUI] -
Problem Saving or Opening Documents with Office 2013 Home & Business
Hello there,
as the title says, I'm running into a problem when trying to save or open Documents in Word,Excel,etc. (all Office Programs)
I get the message "Microsoft Word stopped working". Or Excel, Powerpoint...
I already tried to deinstall and used the Office-FixIt-Tool to clean the PC.
I also updated the driver for my Graphic-Card, installed the newest Windows-Updates and checked if it is caused by an Add-In.
None of this helped. The Problem still exists when starting in Safe-Mode.
In Event-Viewer I get this Message:
Name der fehlerhaften Anwendung: WINWORD.EXE, Version: 15.0.4673.1000, Zeitstempel: 0x54588338
Name des fehlerhaften Moduls: unknown, Version: 0.0.0.0, Zeitstempel: 0x00000000
Ausnahmecode: 0xc0000005
Fehleroffset: 0x00000000
ID des fehlerhaften Prozesses: 0x588
Startzeit der fehlerhaften Anwendung: 0x01d024187bb58e06
Pfad der fehlerhaften Anwendung: C:\Program Files\Microsoft Office 15\root\office15\WINWORD.EXE
Pfad des fehlerhaften Moduls: unknown
Berichtskennung: bf49a2b4-900b-11e4-bbbd-4437e6c80968
or this one:
Name der fehlerhaften Anwendung: FIRSTRUN.EXE, Version: 15.0.4665.1000, Zeitstempel: 0x54339094
Name des fehlerhaften Moduls: unknown, Version: 0.0.0.0, Zeitstempel: 0x00000000
Ausnahmecode: 0xc0000005
Fehleroffset: 0x00000000
ID des fehlerhaften Prozesses: 0x15f4
Startzeit der fehlerhaften Anwendung: 0x01d0241b0af94938
Pfad der fehlerhaften Anwendung: C:\Program Files\Microsoft Office 15\Root\Office15\FIRSTRUN.EXE
Pfad des fehlerhaften Moduls: unknown
Berichtskennung: 48c2649c-900e-11e4-bbbd-4437e6c80968
If I start Windows in Safe-Mode and try to start one of the Office-Products I get another error, something like:
Your Program could not be started. Please try again.
OS: Windows7 64Bit
Hope there is a fix for this...
Thanks in advance!
marcusHello George,
No, it has never worked.
For testing I installed Office 2010 and this worked fine.
But as I said, all versions had been deinstalled before reinstalling Office 2013 (even cleaned up with the FixIt-Tool).
Best Regards
marcus -
Problems with the Creative Cloud Desktop
Hi i changed my Email adress cause i couldnt verify it, because this email got spammed by facebook and all that stuff so my mailbox was always full and i didnt get adobe email. So the problem is, that i changed the email to a new one cause i need to verify the email for using the Creative Cloud Program on my desktop and without doing that i cant use it. My Adobe ID account changed the emailadress and it worked very well but it'll not change the email adress in the programm which i need to verify! I already tried to deinstall and install again and all that i really need help!
Hi i changed my Email adress cause i couldnt verify it, because this email got spammed by facebook and all that stuff so my mailbox was always full and i didnt get adobe email. So the problem is, that i changed the email to a new one cause i need to verify the email for using the Creative Cloud Program on my desktop and without doing that i cant use it. My Adobe ID account changed the emailadress and it worked very well but it'll not change the email adress in the programm which i need to verify! I already tried to deinstall and install again and all that i really need help!
Maybe you are looking for
-
Technical systems in SLD not replicating in LMDB
Hello , I am installing new quality solution manger system (QSM) and trying to connect sandbox erp system to QSM . Already configured SLD and sandbox is visible in it by RZ70 and configured synchronization connection between SLD and LMDb in solman_se
-
Offset for Vendor Account Number(field VENDR) in table BSED
Hello experts, I need to know the Offset where i can find the Vendor Account Number in field VENDR in the table BSED. This field is used for Localisation for TURKY in Reports like RFIDTRBOE1, RFIDTRBOE2. Thanks in advance! Regards, Sandeep
-
Unable to access query in Bex Analyzer
Dear All, Could you please help us as we are getting No authorization error in Bex Analyzer when we are trying to view the query. We can access the query in RSRT using USERID for Execute as others. When we try the same query and with same userID in B
-
How to call a ABAP proxy class from a BADI? Please help!
hi Experts, I have a scenario where I have to call a ABAP proxy class from a BADI. How can I do this? Does anybody has sample code for the same? Please help. Thanks Gopal
-
I have imovie on a 2.8 Ghz imac with 2GB of RAM and it take 5 minutes to load. Any suggestion on speeding up start up time or is this a fact of life until Apple makes performance improvements?