Problem Deleting User Account

I was deleting a user account (securely) and it was taking forever (about 24 hours).  I force shut down the computer and restarted it.  The account has gone from the System Preferences/Users; however, the files are still on the system as there is not enough space on the hard drive for the task to have completed.  This was an Admin account and I’m using Mavericks 10.9.3.
How do I locate the folder and remove this other account?  Help much appreciated.  Thank you.

- open Finder
- on the menu bar: Go -> Go to Folder ...
- in the new window enter: /Users
Here you will find all home folders of all users on the system. Delete the home folder of the user in question.

Similar Messages

  • New Macbook Air setup problem with deleting user account

    I recently changed from a MBP to a MBA and upon completing my migration data from old mac to new one I had an extra user account. So I have my admin account and a guest account and a third account that I don't want. Upon trying to delete this account it show "deleting user account and home folder" but it has been doing this for more than an hour therefore it will not let me exit system preferences. Any help on this?

    I'm not sure I understand what you mean by "need configuration data ... " However, if both computers are on your network then you should be able to synchronize various files or folders using backup software. However, to start you will need to enable File Sharing on one of the computers.
    For help with this select Mac Help from the Finder's Help menu. Search for "file sharing." You should find several links on how to configure it on your computer. Also see Mac 101- File sharing and Tutorial- File sharing in OS X - MacFixIt.
    Once file sharing is set up you can then try a backup utility to do the synching. Most backup utilities not only do backups but can also be configured to synchronize files and/or folders. Here are some possibilities:
    Backup Software Recommendations
    1. Synchronize! Pro X (Commercial)
    2. Synk (Backup, Standard, or Pro)
    3. Deja Vu (Shareware)
    4. Carbon Copy Cloner (Donationware)
    5. Data Backup (Commercial)
    6. SilverKeeper 2.0 (Freeware)
    7. Tri-Backup (Commercial)
    8. SyncTwoFolders (Freeware)
    9, Data Lore (Commercial - exclusively for network file transfers over Bonjour.)
    Others may be found at VersionTracker or MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
    Hope this helps get you started.

  • How to permanently/manually delete User Account on MAC OS X 10.6.8

    Hi There,
    Can you please assist with providing instructions on how to manually delete USER accounts on MAC OS X 10.6.8.  Everyone but one user (who's account was deleted) can not log into the damain device.  As a test I tried to add a new user accout with the same name as before and even though nothing existing in the USERS folder; it states that a duplicate name exists.
    How do I delete that duplicate?  Where could that be located?
    Please let me know,
    Sonia

    Solution!
    Command to locate the hidden User Profile:
    dscl . list /users
    Command to delete the now found hidden User Profile:
    sudo dscl . delete /users/<userID>
    Thanks,
    SoniaCP

  • Problem deleting users with delegated admin

    Hello,
    I seem to be having a problem deleting users with delegated administrator. I am using JES 2005Q4.
    Here is what I do:
    I set Inetuserstatus and mailuserstatus to deleted. Then run msuserpurge to delete the mail box. This seems to be working fine. Then I do a commadmin domain purge and it will actually delete the persons ldap record, but it does not delete the o=pab records or the o=PIserverDB records.
    I am probably missing a step here, and would apprecidate it somebody could point me in the right direction.
    Thanks,
    Gary

    DA patches:
    119777-10 most current release for Solaris
    119778 for X86
    119779 for Linux
    118540-23 Communication Express Solaris Sparc
    118541 X86
    118542 Linux
    118207-42 Messaging core Solaris sparc
    118208 X86
    118209 Linux
    116574-02 Veritas Vcsha (sparc only)
    118242-03 and 118245-03 Dssetup sparc
    118243 and 118246 X86
    118247 Linux
    122018-02 Outlook Connector
    (all the currently released patches. Most have t-patches available from tech support post the above numbers)

  • Can't delete user account with open shopping cart

    Hi all,
    Is it okay to delete user account with open shopping cart? I can't delete user by users_gen, it says existing partner document. I then applied notes 1148837,report PARTNER_SET_DELETE. And this report doesn't really work. I ran it and it found zero occurrnences. Is anybody using this report?
    So is it the only way to delete user from SRM is by su01 and leave some informations on Busines partner (bp)
    Thanks,
    Kev

    Hi. You can easily lock the user and change the validity dates using SU01.
    Then, I would write a program that looks through all locked users and checks their valdity dates. Table USR02 holds all this data.
    Then, if the user is locked and the validity end date was 3 or 6 or whatever months ago (make this a selection parameter probably), then you know you want to delete this user.
    So, go into table HRP1001 where SCLAS = US and SOBID = user name and OTYPE = CP and get field OBJID. This is the central person (CP) number.
    Then, go into table HRP1001 again, this time where SCLAS = BP  and OTYPE = CP and OBJID = the CP number and get field SOBID. This is the business partner (BP) number.
    Now, run function BAPI_USER_DELETE to delete the SU01 user fully, then function HR_CENTRALPERSON_DELETE to delete the central person, then function BUP_BUPA_DELETE to delete the business partner.
    And that should delete everything.
    Regards,
    Dave.

  • Deleting user accounts

    Is there an automated way to delete user accounts on a regular basis through Apple Remote Desktop

    Well you can issue a send unix command or set ARD to regulary send a unix command. The complecity of that unix command is really up to what you can find, hire, or can write yourself.
    If your accounts are coming from an Open Directory or Active Directory, you can configure the account to be 'mobile accounts.' At witch point you can set mobile accounts to expire after x time of inactivty.
    But why do you want to delete accounts? what about the risk of deleting files a user wants / needs.

  • Problem migrating user account SID

    Problem migrating user account SID
    I’m trying to migrate user accounts SID from a Windows 2003 domain to a Windows 2008 domain using the command line admt.exe. There is a trust between the 2 domains and I’m able to migrate a user account using admt 3.1 wizard including SID. The wizard asks me for a user account in the source domain with administrative right for the SID migration.  In the wizard I use the same credentials as my current session. This works fine!!
    But, when I’m using the command line “admt user” in an administrative cmd box i’m not prompted for any credentials in the source domain.  My current credentials have the proper right in the source domain so that should not be any problem but admt is not able to migrate the user SID and gives the following error:
    ERR2:7615 SID History cannot be updated for xxxxx. You must be an administrator in the source domain
    Any ideas ??

    I to am seeing this error - running on a Target DC.
    Command line: admt group /O: GroupOption2.txt /F: test.txt /TO:corporate/Groups
    Option File:
    [Migration]
    SourceDomain=Source.com
    TargetDomain=corp.target.com
    PasswordOption=Copy
    PasswordServer=blade3.source.com
    ConflictOptions=MERGE
    [User]
    MigrateSIDs=Yes
    [Group]
    MigrateSIDs=Yes
    UpdatePreviouslyMigratedObjects=Yes
    FixGroupMembership=Yes
    MigrateMembers=No
    UpdateUserRights=YES
    [Security]
    TranslationOption=Add
    Error from the logs:
    2010-02-15 11:47:14 ERR2:7615 SID History cannot be updated for test group deleteme. You must be an administrator in the source domain.
    The account I am logged in to the target DC is a member of the Administrators group on both domains and of the Domain Admins on the source.
    Any ideas? Searching (with Bing and that other one) only turns up two relevant hits, this thread and a win2000 tech net article.
    Extra info:
    Source: Windows 2003 (OS) - Windows 2000 native functional levels (domain and forest)
    Target: Windows 2008 (OS) - Windows 2003 functional
    Sorry for the retarded formatting.

  • How to find who deleted user account

    Hi there,
    I need help from Security Specialists to find out who deleted user account in past in a R/3 46C system.
    I have already tried below methods and checked previous posts in this forum but no use -
    1. SUIM
    2. SM20
    3. SM21
    4. Report RSTBHIST
    5. ST03
    6. STAT
    7. SECR
    8. SM19
    Thanks in advance.

    Thanks Ben,
    I tried and got output as below -
    Clien     User     Modificati   Modifica   Changed by    PROFS
      900          304902       03.02.2007   15:11:23   107901            D
      900          304902       15.05.2007   13:39:42    AMOL            C ZRFCCPIC__
      900          304902         08.06.2007   12:28:56   AMOL            M FSTSTKCOUN  ZRFCCPIC__
    Which means user was last deleted on 03/02 by 107901 and then I recreated it on 15/05 and maintained on 08/06.
    But again today I found this user missing and thats the reason I 'm desparately looking for delete log.
    I didnt find latest deletion log anywhere.

  • Apple Configurator - 1.2 (Delete User Account while Checked Out)

    Hi Community,
    I have a supervised iPad that was checked out to a particular user. The user account in apple configurator was deleted while checked out. The iPad is now unavailable to check out because it is permanently checked out to the deleted user account.
    I reset and deleted all information on the iPad but since it is supervised it comes right back to the point I checked it out (which I really like). But in this situation how to I get that user off...because I can't check it back in and currently can't use it for anyone else. 
    Thanks!

    I attempted to, but if a device is checked out to a user the unsupervise option isn't available. This is only because I believe the device was checked out and the user it was checked out to was deleted. Normally if there wasn't a user checked out to the device unsupervise would be available. 

  • Why are deleted user accounts showing up in login window and fast user switching menu?

    There are several old user accounts, just test accounts when I was studying for ACSA that I deleted, which continue to show up in the login window and the fast user switcher menu. I deleted them before upgrading to Lion (I think it was before). The accounts do not exsist in the /Users folder, nor even the /Users/Deleated Users folder. Additionally they do not show up in the list of users in System Preferences. Can anyone give some advice on how to remove these "ghost" accounts from the login window and drop down menu?
    Thanks
    dc

    Hi. Thanks for the link. Sorry it took me a while to get to this, the problem is not a show stopper, so to speak, so tried your advice when I had the time. Unfortunatly it did not work. Any other suggestions? Thanks.

  • Problems with user account on external HD

    I'm on a mac mini (Early 2009) running OS 10.9.5. Quite some time ago I moved my user account to an external disk named, let's say "My Disk" and things were running fine. Recently, however, I logged into my account but could not access any of my files. I logged through another account, checked the home directory in Preferences/Users & Groups, and found it to be in the right place, "/Volumes/My Disk/my_home_folder". I then manually navigated to my home folder, and when I selected it, it showed up as "/Volumes/My Disk 1/my_home_folder" (notice the numeral 1 after the name of the disk). This fixed the problem and I can now log on to my account, but:
    This is the second time within a few days that the OS renamed the external HD spontaneously by adding a numeral
    This numeral does not show on the disk image on the desktop, nor in disk utilities
    I can rename the external disk to a different name without a numeral and repoint my account, but if I want to change the name back to it "My Disk", the OS will attach the numeral to it, when viewed in Preferences/Users & Groups.
    Is there a fix other than deleting the user account, or re-installing OS?
    tm

    Answering my own question, this looks like a permissions issue. After repairing permissions the external disk was identified by its proper name (no numerals) and all functions were restored.

  • After deleting user account / Unknown user is shown in information ...

    After having some troubles with my account, I tried to get rid of it by deleting this account.
    So I first edited a new one and after all I removed the old one.
    Since this moment I have an UNKNOWN USER without having read/write-priviliges to my disk.
    Unfortunately this user is not removable.
    Does someone having this problem too?
    Some hints about this matter?
    Message was edited by: 3lm0

    Exactly what did you do to remove your old account? I hope you didn't just drag it to the Trash. If so then you don't have an account because dragging the old Home folder to the Trash is not how you remove an account.
    You say you "edited" a new account. How did you do this?

  • Password Problems with User Account

    I have attempted several times to use my admin account to set up a user account on my G4 desktop. I can always manage to set up the user and password, but whenever I log in as the new user, the password doesn't work. I've tried this several times using different user names and different passwords, but no luck. Can someone tell me what I'm doing wrong?
    G4 Tower   Mac OS X (10.4.6)  

    I was having a similar problem to yours. Running 10.4.6 on an old PowerBook G4 Titanium 400Mhz, and when I tried to create a new regular user account last week, the login window wouldn't accept my new password for the user account, even though I'd just created it. It just shook/shuddered to indicate typing the wrong password, even though I knew I was typing it right!
    I tried lots of troubleshooting steps to no avail. Downloaded and installed the newest 10.4.8 full updater. Ran disk utility to repair permissions, and checked the disk for problems. Still no go on logging into the new regular user account. Deleted and recreated the account a few times with no luck.
    Then I went into the security control panel and set a new "Master Password" for my computer. When I created a new account, and then tried to log in, it rejected the password, but after typing the "right" password four times, the computer gave me an opportunity to type the Master Password, and then "reset" the new user's password, after which it logged in just fine!
    I definitely recommend trying this procedure before going through a whole reinstall process for the operating system!
    -Nate

  • Accidentally deleted user account

    Hi, please help
    I had a problem with a user's account and saw there were two identical mobile accounts in the Accounts preference pane. I deleted one of them using the option to "delete immediately" without realising I should have used the other option which creates an dmg file and moves it to the Deleted User area. Is there any way I can retrieve this folder as it contains all of the user's mail folders from Entourage.
    Many thanks

    unixhater,
    Stop using the Mac!
    The only hope you have of recovering the files, is to use a Third-Party recovery utility, like Data Rescue II.
    ali b

  • Help! Stupid problem with user accounts!

    I got a very old, very cheap laptop (original ibook clamshell). The Short Name referred to one of the previous owners. I had a vague idea of changing it, but realised this might be difficult. I haven't really got a rescue CD at present; the OS must have gone through several OS versions on the way, and it won't run Tiger which is what I have on my desktop.
    The OS is up to late Panther. I haven't had any problems with it. Having some time on my hands, I picked up an O'Reilly book on 'Panther hacks', and went through the 'Change Short Name' routine with netinfo. Before doing this, I made sure there werent any document files on the machine I'd be bothered about losing. It has less than 1Gb hard drive space, so I've never regarded it as a machine to keep things on.
    Went through the process of doing this, and moving the home directory, without problems.
    Logged out. Discovered that there were two users with my name because I'd also created another user with my name but realised that the main account with the Short Name will run the machine. Logged in, and deleted one of them into Deleted Users.
    This took a suspiciously long time; I suspect I deleted the main user by mistake. Yes, I realise this was a Bad Thing.
    Suddenly, instead of having two administrator accounts with my name, I have one standard account with my name. (Yes, both accounts were administrator accounts before I deleted the wrong one by accident...)
    I haven't particularly lost data, because any data created on Methuselap the Ancient of Days's minuscule hard drive gets networked straight over to my main desktop, and I don't have a login password set (again, anything that needs to be secure can go on a flash drive or the desktop), I'm annoyed (mostly at my own stupidity) that I am now no longer able to fix my privileges to set myself up as admin.
    Has anybody got any particular bright ideas for what to do next?

    Ruth,It will be of benefit to others who may find a similar situation to yourself if you mark Niel's post as 'Helpful' or more probably 'Solved' and the overall case as answered.
    This will also credit Niel for providing the help and push him 10pts closer to getting his Level 5 status!
    thanks
    mrtotes

Maybe you are looking for

  • Closing Excel with ActiveX causes problem

    Hallo, I am having a problem using ActiveX and Excel. I am using NT 4.0, Service Pack 3, Excel 97, Service Release SR1 and LabVIEW 5.1. My LV application opens an Excel worksheet, operates on the sheet and then closes it by using ActiveX. Everything

  • How do I create a list of files and tags in Album

    I would like to create a list of all the files I have in Album. (I am using Photoshop Album Started Edition 3.) Ideally this list will be formatted like this... FILE NAME (WITH EXTENSION) - DATE - TAGS Does anyone who if this can be done and how? PS

  • PO PDF PRINT

    Dear All            i am using PO Print(Output type NEU) using preprint paper.but now i need plain paper i devlop new program and form this mehod using pdf formet only how to creat new output type Thanks and regards Suresh

  • Why is Site Slices pushed down when i add text?

    how come when i upload my site and when i add too much words it pulls the bottom away from the original layout. I can only fill the box half way of words and when i pass that it will move it down. Why does it do that?

  • Add MARA field to CFM1 - Note 360723 not working

    Hello all, We need to add a selection field to CFM1 (program RIMODGEN) : field packaging MARA-MPROF. We found OSS note 360723 which seems to meet our requirement. We did the modifications in specified programs, but there is no result : field 'Packagi