Problem deploying VB6 project after upgrade from version 8 to version XI

Hi,
I'm upgrading a VB6 application from crystal report 8 to crystal report 11.
When running on development machine it works fine, but when i deploy the application on the client pc instead of the activex control i get a white background with no error (Setup package is created by adding merge modules to an installshield 11 express project)
Searching for dll not installed or not properly registered, i've used the "modules" utility and then i've manually registered dll that wasn't loading on the client pc.
After that i get error 339 : 'crviewer.dll' or one of it's dependency is not registered. File not valid or not found.
Is there a list of dll that need to be on the client machine or some advice for using the merge modules with installshield 11 express?
Thanks,
Carlo

Download [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx] to see what is happening when you runt he project. It will give you more info than Modules.
Also, ensure that you are distributing the correct version of the runtime. You mention XI, but that still leaves the option of 11.0 or 11.5 (each of which as a different runtime). See [this|https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsReportDesignerComponentRuntimeDistribution-Versionspre8.0.xto12.0] wiki for more info.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Similar Messages

  • Problems with IMAQ Vision after upgrading from Labview 6i to Labview 6.1

    Hi,
    We just upgraded from Labview 6i to 6.1.To do this,we uninstalled the 6i version as was suggested by NI and then installed the 6.1 version.Later when we tried to run the old vi's written using Imaq vision, we ran into different problems.Has anyone experienced any similar problems with IMaq vision after upgrading?If so please help me solve this issue.
    Thanx
    deepak

    What kind of problems?
    I would strongly suggest that you uninstall IMAQ (all elements) and reinstall them. They register with Windows, probably docked to 6i, and also must be recompiled, which I believe is done in installation.
    This is your best bet.
    If you still have problems, contact NI and ni.com/ask and start a support inquiry.

  • Performance problem for mass transactions after upgrade from 4.7 to ECC6.0

    Hi All,
    After upgrade from 4.7 to ECC 6.0 (IS-U), mass transactions such as FPY1, FPVA, FP04M are taking very long time to complete. for example, before upgrade the jobs sceduled for FPVA transaction take around 5k-6k seconds. Whereas after upgrade the jobs for FPVA with the same variant takes around 9k-10k seconds. I am unable to figure out the cause for exponential increase in the duration of several mass-jobs (after the upgrade). Are there any SAP notes or do we need to do any customizing setting to solve this problem? Does anyone face this kind of problem?
    Thanks in advance
    Taj

    Hi,
    This is normal after upgrade to 6.0, I have faced the same in all upgrades I've done and some others that I have involved also. If you did not requests and going live upgrade check I strongly recomend to schedule an Early Watch Check to minimize the impact. Times won´t be the same but can be very close if the system is tuned well. We have tuned systems that now run with good performance after this services.

  • Problem with Java Script after upgrade from BW 3.5 to BI7

    Dear Colleagues,
    We're facing the issue with Java Script after upgrade of BW 3.5 to BI7.
    Just after update we checked the basic functionality and it occured that some of web templates that use Java Script don't work. They generate seelction screen, but after selection the screen becomes blank without any error messages.
    We're currently stucked since web templates weren't converted to BI7 version so they should work exactly as before the upgrade.
    We compared the Java code with other environment that was not upgraded - it's perfectly the same.
    The only explanation that comes to my mind is that some Java Script settings on the server level were changed during the upgrade but I have no idea where I can check that.
    Thanks in advance for any suggestions,
    Andrzej Bobula

    Hi Deepu,
    Thanks, it was great to read your reply and then few minutes later talk to you live on SDN Day!
    Unfortunately, http cache clean-up did not help. But there is another funny thing I found - for exactly the same 3.5 webtemplate html code returned from WebAS 3.5 was different then from 7.0.
    Unfortunately, this editor does not allow to paste complete code, even in CODE brackets, but here are main differences:
    <b>3.5</b>
       if (navigator.appName == "Microsoft Internet Explorer")
    <frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=1&REQUEST_NO=1&CMD=GET_TEMPLATE"
    name="Content">
    and
    <b>7.0</b>
       if (navigator.appName.indexOf("Microsoft Internet Explorer")!=-1)
    <frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=8&REQUEST_NO=0&CMD=GET_TEMPLATE"
    name="Content" 0nLoad="javascript:loadTitle()">
    (I intentionaly put 0 i/o o in 0nLoad, otherwise Forum's editor does not accept the text.
    How about SAP's claim that technical upgrade from 3.x to 7.0 changes nothing?
    Regards,
    Vitaliy

  • Problem with Billing Engine after upgrade from CRM 5.0 to CRM 7.0

    Hello together,
    The system  of our customer has been upgraded from CRM 5.0 to CRM 7.0. After that some problems occurred regarded the billing.
    In the Billing Due List a dump occurs when clicking on an item and then on conditions
    Dump message: No function module can be found named "/1BEA/CRMB_DL_PAR_O_DERIVE" however.
    (Other classes are  new generated after the upgrade)
    During the Analysis we looked to the billing engine navigator:
    In the Billing Engine Navigator (Transaction: BEFN_F1) the Generation Log shows the following:
    We have re-generated the Object PAR in CRMB->DL->Feature->PAR. But this shows the above displayed error message. How can we add value to the Placeholder?
    Another question is which impacts does it have if we regenerate the complete billing engine for CRMB with transaction BEA_CONFIG_F1 (Configure Application)?
    BR, Anne

    Hi Nawanit,
    we checked the key figure settings and categories. Everything is maintained correctly.
    Since we work with MRP areas we also checked the "Global Parameters and Default Values for MRP Areas" in APO Customizing: The "Default values for Stock Transfer Documents" is set to "1" = Stock Transport Requisitions for MRP Areas.
    BUT: When I try ot change this indicator I get the following message no. /SAPAPO/MRPA000:
    "Process. w. stock transp. requisitions is not supported in standard sys. The process with stock transport requisitions will be supported as of SAP R/3 Enterprise Core Release 4.70 with SAP R/3 Enterprise Extension Set 2.0. ".
    As far as we work with ECC 6.0, EHP4 this message makes no sense.
    Does anyone have another idea?
    Thanks
    Jan

  • Password problem in oracle 10g after upgrading from oracle 9i

    Hi to all,
    i'm migrating oracle 9i to oracle 10g. in oracle 9i username/password are same character(eg kareem/kareem)
    after upgrading to oracle 10g will it create any problem. Because in oracle 10g the condition is when creating user is username and password should not contain same character (kareem/kareem not allowed).
    Thanks in advance

    in oracle 10g document, they have mention below condition to create user. See the second condition.
    • Passwords must be between 4 and 30 characters long.
    • Passwords cannot be the same as the user name.
    • Passwords must be from the database character set and can include the underscore (_), dollar ($), and pound sign (#) characters.
    • Passwords cannot be Oracle reserved words.
    • Don't start the password with a numeral.
    • Don's use change_on_install or manager as passwords, since they are used by Oracle.
    As i'm going to upgrade oracle 9i to 10g. if it give problem because username and password are same then i have to request my development team to change the password in their application.Can you please verify and tell me.
    Edited by: user7071421 on Sep 25, 2008 4:33 AM

  • Problem with field catalog after upgrade from 4.0

    Hi experts,
    We have recently upgraded from CRM 4.0 to 5.2.
    I am now experiencing a problem with generation of a transport request for field catalog in transaction CTFC_CRM. I can generate the field catalog without errors.
    The problem is that when I want to create the transport request in our dev system a pop up appears saying "Create object directory entry". Here I have to enter a package for some of the fields in the field catalog. The special thing is that the fields are not custom fields but rather SAP standard fields (using standard data elements). For example field BZIRK.
    These are SAP standard fields but they are not standard in the field catalog. In 4.0 I did not get this prompt but this has apparently changed from 5.0.
    What do I do? I guess if I need to create the objects I will need to use an SAP standard package. But how do I know what package to use?
    Any comments or suggestions will be highly appreciated.
    Best regards,
    Anders

    Hi,
    If you did just install database, then you use Embed PL/SQL Gateway.
    See this guide
    Upgrading Oracle Application Express in Oracle Database Express Edition
    I think you have not run step 5 script apxldimg.sql
    Regards,
    Jari

  • Trouble opening project after upgrading from RH7 to RH8

    We recently loaded a RH7 project into Source Control 3.1.  All things seemed to be working well.  Until last week I was the sole user of the program and editor on the project.  Last week the IT department attempted to add a new user to the project, installing RH8.  The new user profile attempted to open the project in RH8 but we have not been able to completely open the project.  This was done before upgrading my PC from RH7 to RH8.
    We were unable to open the project (and converting) in the new profile, however when viewing the project in Source Control, it showed all the files were checked out exclusively to the new profile.  We were able to utilize the 'check in' function in SC as Admin users and checked in all the files.
    My PC was then upgraded to RH8 and I am attempting to open the project.  I received the Upgrade project dialog box. (I select 'Upgrade). I then recieve a warning 'Your project file, C:\....cpd, is corrupt and cannot be opened.  Try deleting this file and reopening the project."
    I did this and tried to open the project.  I got as far as the status bar showing the files/project was being loaded.  After several minutes the screen goes all white and the Task Manager shows that it is not responding.
    Any suggestions for this novice?
    thanks!

    Hi,
    Please try the following tech doc and see if this helps in resolving the issue or not. Make sure that you have the backup of your project before trying these steps:
    http://kb2.adobe.com/cps/528/cpsid_52862.html
    Piyush Bhatnagar

  • Problems with Canon ip4200 after upgrading from panther to tiger.

    Hello
    I have recently purchased a lovely new imac 24", everything is great apart from my my printer which is now printing pictures with a lovely magenta cast over all my photos.
    From googling around I think it might something to do with having a double printer profile on? But the actually printer doesn't seem to have much options to play around with.
    If anyone has any idea of what's happening or how to sort this out I would really appreciate it as after MANY hours of googling I am now totally perplexed!
    Thanks
    Rosie

    Hello Rosie,
    For starters, please ensure you have the latest driver for the iP4200 installed. You can get this from the Canon Europa web site. The version is 4.8.3. With the new driver available, follow this procedure to remove any previous version before installing this later version.
    1. Open Printer Setup Utility, delete the iP4200 queue and then click on Printer Setup Utility and select Reset Printing System.
    2. Close the Printer Setup Utility.
    3. Go to Library > Printers > Canon and delete the contents of the BJPrinters folder.
    4. Go to Library > Receipts and delete the file Canon iP4200 xxx.pkg
    5. Empty the Trash
    6. Restart the Mac
    7. Install the latest version of the Canon driver (4.8.3)
    8. Once the driver installation is complete, go to Applications > Utilities and open Disk Utility. Run the Repair Disk Permissions option.
    9. Open Printer Setup Utility and click Add.
    10. Select the Default Browser view and select the Canon printer connected via the USB port. The Print Using menu should automatically change to Canon IJ Printer.
    11. Click Add to add the printer.
    With this latest driver installed, print your photo and check your output. If there is still a magenta tinge, open the driver settings and select Quality & Media. Try a different media type, such as Photo Paper Pro, and also set the Print Mode to the photo setting. If you are printing from iPhoto, then open Color Options and ensure you have the Color Correction set to BJStandard.
    If you are printing from PhotoShop, then open Color Options and ensure that Color Correction is set to ColorSync so that the ICC profile associated with the paper type selected above is used.
    If you want to check the gamut of the respective paper types/profiles available to the printer, you can open the ColorSync utility and expand Others > /Library/Printers/Canon/BJPrinter/...Here you will see the available profiles for the respective Canon paper stocks and their colour gamuts. The MP settings are Matt Paper, PR is Photo Paper Pro and SP is Photo Paper Plus Glossy.

  • Error deploying Web Service after upgrading from WL 7.0 No Service Pack to SP5

    Hello
    I have problem using HttpServletResposneWrapper with a ServletFilter in WLW
    7.0 SP5. When I apply the filter to JWS file in Development Mode, following
    Exception is thrown when I access a JWS.
    ===================================================================
    java.lang.ClassCastException: servlet.MyServletResponse
    at weblogic.knex.dispatcher.HttpRequest.getRequestURL(HttpRequest.java:233)
    at weblogic.knex.dispatcher.HttpRequest.(HttpRequest.java:51)
    at weblogic.knex.dispatcher.HttpServer.doGet(HttpServer.java:291)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at
    weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Servle
    tStubImpl.java:1094)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :437)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:20)
    at
    weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
    at servlet.MyFilter.doFilter(MyFilter.java:25)
    at
    weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
    at
    weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(W
    ebAppServletContext.java:5632)
    at
    weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
    r.java:685)
    at
    weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
    ntext.java:3213)
    at
    weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
    :2555)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:251)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:219)
    ===================================================================
    I have looked at "weblogic.knex.dispatcher.HttpRequest" class. It seems like
    this class tries to cast the response object to "ServletResponseImpl" class,
    so ClassCastException is thrown.
    Is there any workaround for this issue, since my code is compliance with
    J2EE standard. Thank you very much in advanced.
    Regards,
    Tinnapat C.
    PS. These are my codes.
    =====================================================================
    package servlet;
    import javax.servlet.http.HttpServletResponse;
    import javax.servlet.http.HttpServletResponseWrapper;
    public class MyServletResponse extends HttpServletResponseWrapper {
    public MyServletResponse(HttpServletResponse response) {
    super(response);
    =====================================================================
    package servlet;
    import java.io.IOException;
    import javax.servlet.Filter;
    import javax.servlet.FilterChain;
    import javax.servlet.FilterConfig;
    import javax.servlet.ServletException;
    import javax.servlet.ServletRequest;
    import javax.servlet.ServletResponse;
    import javax.servlet.http.HttpServletResponse;
    public class MyFilter implements Filter {
    private FilterConfig config;
    public void init(FilterConfig config) {
    System.out.println("Filter.init");
    this.config = config;
    public void doFilter(ServletRequest request, ServletResponse response,
    FilterChain chain) throws ServletException, IOException {
    System.out.println("Filter.doFilter");
    ServletResponse wrappedResponse = new
    MyServletResponse((HttpServletResponse)response);
    chain.doFilter(request, wrappedResponse);
    public void destroy() {
    System.out.println("Filter.destroy");
    =====================================================================
    <filter>
    <filter-name>MyFilter</filter-name>
    <filter-class>servlet.MyFilter</filter-class>
    </filter>
    <filter-mapping>
    <filter-name>MyFilter</filter-name>
    <url-pattern>*.jws</url-pattern>
    </filter-mapping>
    =====================================================================

    Hello
    I have problem using HttpServletResposneWrapper with a ServletFilter in WLW
    7.0 SP5. When I apply the filter to JWS file in Development Mode, following
    Exception is thrown when I access a JWS.
    ===================================================================
    java.lang.ClassCastException: servlet.MyServletResponse
    at weblogic.knex.dispatcher.HttpRequest.getRequestURL(HttpRequest.java:233)
    at weblogic.knex.dispatcher.HttpRequest.(HttpRequest.java:51)
    at weblogic.knex.dispatcher.HttpServer.doGet(HttpServer.java:291)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at
    weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Servle
    tStubImpl.java:1094)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :437)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:20)
    at
    weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
    at servlet.MyFilter.doFilter(MyFilter.java:25)
    at
    weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
    at
    weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(W
    ebAppServletContext.java:5632)
    at
    weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
    r.java:685)
    at
    weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
    ntext.java:3213)
    at
    weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
    :2555)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:251)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:219)
    ===================================================================
    I have looked at "weblogic.knex.dispatcher.HttpRequest" class. It seems like
    this class tries to cast the response object to "ServletResponseImpl" class,
    so ClassCastException is thrown.
    Is there any workaround for this issue, since my code is compliance with
    J2EE standard. Thank you very much in advanced.
    Regards,
    Tinnapat C.
    PS. These are my codes.
    =====================================================================
    package servlet;
    import javax.servlet.http.HttpServletResponse;
    import javax.servlet.http.HttpServletResponseWrapper;
    public class MyServletResponse extends HttpServletResponseWrapper {
    public MyServletResponse(HttpServletResponse response) {
    super(response);
    =====================================================================
    package servlet;
    import java.io.IOException;
    import javax.servlet.Filter;
    import javax.servlet.FilterChain;
    import javax.servlet.FilterConfig;
    import javax.servlet.ServletException;
    import javax.servlet.ServletRequest;
    import javax.servlet.ServletResponse;
    import javax.servlet.http.HttpServletResponse;
    public class MyFilter implements Filter {
    private FilterConfig config;
    public void init(FilterConfig config) {
    System.out.println("Filter.init");
    this.config = config;
    public void doFilter(ServletRequest request, ServletResponse response,
    FilterChain chain) throws ServletException, IOException {
    System.out.println("Filter.doFilter");
    ServletResponse wrappedResponse = new
    MyServletResponse((HttpServletResponse)response);
    chain.doFilter(request, wrappedResponse);
    public void destroy() {
    System.out.println("Filter.destroy");
    =====================================================================
    <filter>
    <filter-name>MyFilter</filter-name>
    <filter-class>servlet.MyFilter</filter-class>
    </filter>
    <filter-mapping>
    <filter-name>MyFilter</filter-name>
    <url-pattern>*.jws</url-pattern>
    </filter-mapping>
    =====================================================================

  • The synth pad sound Warm Pad has changed after upgrading from Logic Express 7 to Logic Studio

    Hello!
    I have composed a lot of songs over the years using Logic Express 7, and my favourite synth pad sound there was a sound called Warm Pad (from the EXS24 Sampler).
    A half a year ago I upgraded to Logic Studio, mainly because I needed WaveBurner. Happily, all my songs sounded exactly the same after the upgrade, except from 1 sound: The synth pad sound Warm Pad. It still got the same name and location, but the sound was replaced with a very sharp and much more distinct sound (not warm at all, in my ears at least).
    I have tried to replace it with different synth pad sounds from the EXS24 Sampler, and the one I find to come most close to the old Warm Pad from Logic Express, is a synth pad sound called Pad 1. Still, I don’t think it sound exactly the same.
    So, in order to finish all my songs and make an album, I ask you for help:
    1. Do you know how I can get EXACTLY the same sound as the old Warm Pad Logic Express, with my new Logic Studio?
    2. Have you experienced the same with sounds, after upgrading from one Logic version to a newer one? And what have you done to find back to the old sounds?
    I will be VERY thankful for help, because I am not a genius in the mysterious (but yet exiting) world of synthesizer synthesis.
    Best regards,
    Asle
    Composer, guitarist and entrepreneur
    Norway

    I have the boxed version of logic studio.
    When you install, if you pick the "ad hoc" installation you can add the logic7 patches to your existing patches.
    I think running installation again you should be able to install just that.

  • I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

    After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this? 

    If you have this product,
    http://www.symantec.com/business/support/index?page=content&id=TECH165159
    you have to go back to Snow Leopard.
    To re-install SL, back up your home directory, format and re-install.

  • Problem with update MUSE CC 2014.2 (october 6). after upgrading to the new version of Muse crashes very often (out without notice).

    Problem with update MUSE CC 2014.2 (october 6). after upgrading to the new version of Muse crashes very often (out without notice).

    HELP! i can't get ANYTHING done in the new muse - keeps closing.  once it crashes - i can't get the file back open!
    i've lost all my work!
    from my desktop - when it stared happening was with the updated version:
    Logging in build 2014.2.1.10 started at: Mon Nov 03 13:36:38 2014
    ========================================
    [00:00:42.416] Opening file '\\D-LAPTOP\_websites\dsbees muse\dsbees.muse' with status:success size:9797632 mod Date:Tue Sep 23 15:51:42 GMT-0500 2014 highestUID: 3548
    [00:01:03.898] Preparing to Save As over "\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse" exists: true
    [00:01:17.516] SaveAs complete for file '\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse' file size:9830400 mod Date:Mon Nov 3 13:37:51 GMT-0600 2014 highest UID:3551
    Build 232: Mon Nov 3 19:41:03 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 232: Mon Nov 3 19:41:03 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 232: Mon Nov 3 19:41:07 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 232: Mon Nov 3 19:41:21 2014 UTC: Error: CSI: IMS: Connect: Error Code: I-200 Error Message: No Account
    Build 232: Mon Nov 3 19:41:21 2014 UTC: Unknown IMS error 'SHARED_NOACCT_ERROR' has occurred when retrieving IMS token.
    Build 232: Mon Nov 3 19:41:57 2014 UTC: Opening file '\\D-LAPTOP\_websites\dsbees muse\dsbees.muse' with status:This Adobe Muse site file requires a newer version of Adobe Muse. Please update to the latest version. size:9797632 mod Date:Tue Sep 23 15:51:42 GMT-0500 2014
    Build 232: Mon Nov 3 19:41:57 2014 UTC: This Adobe Muse site file requires a newer version of Adobe Muse. Please update to the latest version.
    Logging in build 2014.2.1.10 started at: Mon Nov 03 13:43:17 2014
    ========================================
    [00:00:21.481] Opening file '\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse' with status:success size:9830400 mod Date:Mon Nov 3 13:37:51 GMT-0600 2014 highestUID: 3551
    [00:00:30.373] AssertInDebug: Unable to run recovery. User file remains locked after 5 second pause.-assertInDebugOnly+DataBase/recover+MuseSite$/recover+MethodInfo-2886+DataBase$/run Recovery+apply+UIComponent/callLaterDispatcher2+UIComponent/callLaterDispatcher+end stack
    [00:00:30.404] Failed to recover file:\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse
    [00:00:30.420] Calling openConnection for file that doesn't exist? C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ Parent folder exists.
    [00:00:34.429] open of SQL connection failed for C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ
    [00:00:34.429] Failed to open mini-save connection B "C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ" Doesn't exist. Folder exists. error:SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'
    [00:00:34.429] EXCEPTION:[SQLC/internalOpen] SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'-SQLConnection/internalOpen+SQLConnection/open+DataBaseConnectionWrapper/o penConnection+MethodInfo-28954+EventDispatcher/dispatchEventFunction+EventDispatcher/dispa tchEvent+MethodInfo-28938+end stack
    [00:00:34.445] AlertAndExit because of: [SQLC/internalOpen] SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'

  • My ipad will not stay activated after upgrading from version 7 to version 8.

    After upgrading from version 7 to version8 I cannot keep my ipad activated.  I have tried online tech support and visited an Apple store with no one able to tell me what is happening.  Some said it might be had ware problems.  Other say it might be software problems.  With vs 7 I never had the problem.. I have anolder ipad with vs 5 and do not have the problems.  any feed back from anyone.

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Problems after upgrade from SCVMM 2012 Sp1 to SCVMM 2012 R2

    I did a in-place (uninstall VMM2012 Sp1, retain the database, and install VMM2012 R2 point to old database) upgrade. All the steps work fine.
    The only problem (so far) is that when I create a new VM using a custom template (for example, Windows 2008 R2), the deploy fail with the following error:
    Error (2912)
    An internal error has occurred trying to contact the vm-scvmm2012.domain.com server: NO_PARAM: NO_PARAM.
    WinRM: URL: [http://vm-scvmm2012.domain.com:5985], Verb: [INVOKE], Method: [GetError], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/microsoft/bits/BitsClientJob?JobId={56B8E488-5DB9-4CC1-BEFA-AFF76E1E4D2D}]
    Unknown error (0x80072f0d)
    Recommended Action
    Check that WS-Management service is installed and running on server vm-scvmm2012.domain.com. For more information use the command "winrm helpmsg hresult". If vm-scvmm2012.domain.com is a host/library/update server or a PXE server role then ensure
    that VMM agent is installed and running. Refer to http://support.microsoft.com/kb/2742275 for more details.
    Information (26278)
    VMM could not offload transfer the file \\vm-scvmm2012.domain.com\MSSCVMMLibrary\VHDs\Template_Windows_2008_R2_SP1.vhdx to C:\ClusterStorage\Volume1\VM-NEWVM\Template_Windows_2008_R2_SP1.vhdx.
    Any ideas?

    I have a similar problem when migrating VMs from Windows 2008 R2 (Non Clustered) Hyper-V to Windows 2012 Hyper Cluster. I had previously migrated about 100 VMs like this with no problem. It appears since upgrading from VMM SP1 Rollup 4 to Rollup 5 this problem
    is happening. All Agents are up to date.
    I can migrate VMs in the cluster no problem.
    I removed the Windows 2008 R2 Hyper-V host and added it back which allowed the job to at least start but when it gets to the final steps of importing the VM it fails with the same error and references the VMM server.
    Others suggest this is a VMM Certificate problem and you can remove the Cluster node and add it back again but I can't do that in a production Cluster with hundreds of VMs. That is not an acceptable solution.
    How can we fix this?

Maybe you are looking for