Problem disabling startup of PC Suite in Windows X...
Hi,
I'm running Nokia PC Suite version 7.0.8.2 which I just installed yesterday on my Windows XP SP3.
Ever since I've had a problem with the two tray items from PC Suite (stupidly didn't block them just this once which I usually do with Spybot S&D from the start) that continuously and automatically start up at boot.
Now after download and install of "AutoRuns for Windows" from the link in another post I read in this forum and disabling it there the result is the same. I have tried to untick and to even delet the start up-keys in both programs but to no luck.
In MSCONFIG the possibility of disabling PC Suite isn't even there because it is not listed at all.
This annoying junk just keeps reinstalling itself with a new key each and every time I delete or untoggle it.
Anybody out there who can give me a hint on how to disable this once and for all?
PS: Would it help to uninstall PC Suite completely and then to reinstall the program again just that I'd use the blocking feature of Spybot S&D at the second install or is it too late for that now since the registry keys already exist from the first install?
Thanks in advance for any help.
Message Edited by andy1975 on 19-Sep-2008 04:27 PM
i think Error with XP SP3
first i install 7.0.8.2 PC suite using no problem , after the auto update and install SP3 then cannot use the PC suite..inside the Nokia connection manager also can not chooes the ( cable , BT , Serial ,etc.)
below are the infromation on my SP3
PC Connectivity Solution:
Version 8.22.4.0
[Nokia Connectivity Cable Driver:]
Version 7.0.2.0
Operating system:
Microsoft Windows XP 32-bit Edition, Service Pack 3
Language: English
Language for non-Unicode programs: English
Detected Internet browsers:
- Microsoft Internet Explorer 7.0 (Default browser)
- Mozilla Firefox 3.0
Detected Bluetooth stacks:
- Broadcomm (Version: 5.0.1, Build: 2609)
i try to install 7.0.8.2 PC suite to another computer with XP SP2 , no probelm on the communcation.
Note :don't know whether is the SP3 casue the problem !! and i check the Nokia website support up to SP2 ONLY.
Message Edited by ckpoon on 19-Sep-2008 06:28 PM
Similar Messages
-
Problems at Startup - Windows 8.1
So for the past (roughly) week, I've been having some unusual activity at startup. When the usual Windows 8.1 picture for login comes up (i.e. the picture that slides upward, covers the password page), there would usually be a time indicator at the bottom
left. Sometimes the picture does not come up at all, but usually it takes about 15 seconds for the picture to come up. In addition, after hitting any key to get to the page where I input my password, the password blank and account picture do not appear. All
I can see is the background color and the symbols for power and keyboard language in the bottom right. I can bypass this problem by hovering over one of the aforementioned buttons (i.e. ENG US, the power symbol), but it is nevertheless annoying and, honestly,
a little unsettling. My computer is less than a year old; stuff like this should not be happening.
Any help would be greatly appreciated.Hi,
Have you tried to boot into clean boot to check this issue as Arnav Sharma suggested above?
Regarding the issue here, do you mean after clicking the
lock screen, the logon screen is not showing out well?
Here is a VBscripts to disable lock screen in Windows 8/8.1, we may take a try and see if issue insists.
Disable or Enable lock screen in Windows 8 (VBScript)
Best regards
Michael Shao
TechNet Community Support -
o my god !
I am running windows xp media center edition 2005 (sp2).Phone-N70 with cable.
I was already having so much problems with PC suite 6.83....And then I found a FAQ ...it says my pc's operating system is not supported by Pc suite. Wat should i do...Wat is the correct version for me...
my problem is after installing pc suite-On the device manager...Under portable devices...n70 is disabled...And thr is an error with Windows Portable devices !
CoOLYa..but everytime i restart my pc....it comes over n over again
CoOL -
Problem Installing Developer Suite on WIndows Vista
Hi! i'm a student of computer science, and i need to install developer suite for a proyect i need to do for one of my classes.
I have a problem installing developer suit on Windows Vista. After i download and unzip both disk, i run the setup from the installer folder and i get an alert that says: "abnormal termination. There's been an internal error. Send the following files to the Oracle Suport Services: Unknown, Unknow, Unknow". I've also tryed with the setup from the main folder and i get the same alert. I don't know what to do, i've tryed setting the compatibility mode to windows XP, runnig as administrator, changing the performance configuration of my computer and nothing. Please help me to install the program!Which developer suite are you using???
-
Oracle Developer Suite 10g - Windows 7 - swap space problem
Hi brothers and sisters,
Hope all you are fine. I am facing swap space problem while installing Oracle Developer Suite 10g on Windows 7 . I have downloaded and installed Oracle Database 11g Express Edition successfully and it is working properly. Now, I have downloaded two files
a. ds_windows_x86_101202_disk1,
b. ds_windows_x86_101202_disk2
to install Oracle Developer Suite 10g using Windows 7 Ultimate. The Oracle Universal Installer have passed the following issues:
a. Operating system version,
b. Monitor
But while checking swap space, it gives a message, "0 MB available, 1535 MB required", Failed. I have 2 GB RAM installed and system managed paging file space which is currently allocated to 2038 MB in my system .
Please solve me the problem.
Noorincrease the system virtual memory for the OS drive.
check this link
http://hamid-oracle.blogspot.com/2011/06/how-to-install-oracle-developer-suite.html
also check this link.
Re: error installing oracle forms 11g release 2
Hope this helps
If someone response is correct or helpful, mark accordingly. and if answered mark answered.
Edited by: HamidHelal on Jun 27, 2012 2:28 PM -
Problem Disabling Beats Audio w/ Windows 10
Hi - I have problem with Beats Audio Control Panel after upgrade windows 8 .1 to windows 10. I updated the audio drivers which didn't solve the problem.
Product Name: Hp Pavilion dv7-7051swProduct Number: B6G49EA#AKD Driver Versions:IDT High Definition Audio CODEC - 6.10.6491.0
Intel(R) Display Audio Driver - 6.16.0.3154NVIDIA Virtual Audio Driver - 1.2.30.0 I tried also reinstall this driver but it didn't help.
It's propapbly the same issue as here:http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Problem-Disabling-Beats-Audio-w-Windows-8-1/m-p/3208867#M43609 Thanks for any help.DMasterHey, I had the same problem as you and solved it. Product Name: HP ENVY 15 Notebook PC
Product Number: J0C48EA#AB9
OS: Windows 10 Home 64-bit While using Windows 8.1, what I did to disable the Beats Audio Control Panel was to update the driver to the generic High Definition Audio, as this guy shows:
https://goo.gl/0XN7Nl When I upgraded from Windows 8.1 to Windows 10, the new OS started using the IDT driver, enabling the Beats Audio Control Panel.
I've tried to do the same under Windows 10 but there was Generic Audio Driver a.k.a. High Definition Audio Driver available. This is what I did:
1. Download, install the High Definition Audio Tool from Microsoft Hardware Dev Center, and restart your PC. This is the generic audio driver that was missing:
http://download.microsoft.com/download/4/8/D/48D7ED36-832B-41D7-AE0A-04AD7D8CA837/HdauSetup_x64.msi
https://msdn.microsoft.com/en-us/library/windows/hardware/Dn613936(v=VS.85).aspx 2. Open Device Manager -> Sound, video and game controllers
3. Righ Click Menu over IDT High Definition Audio CODEC and select Update Driver Software
4. Choose Browse my computer for driver software
5. Choose Let me pick from a list of device drivers on my computer
6. Choose High Definition Audio Device
7. Select Yes in the Update Driver Warning 8. The High Definition Audio Codec is installed and the Beats Audio Control Panel disabled Now I can hear all my music again without the awful Beats Audio effects and volume variations that are a nag.
Hope this helps you out. Thank you. hitek81 -
Mir stürzt ständig der Firefox ab ( 35.0 ) Windows 7. Fehlermeldung meist Plug in Container reagiert nicht mehr...........
Was soll ich tun??
Ralph
Aufgrund eines Problems kann dieses Programm nicht mehr mit Windows kommunizieren.
Problemsignatur:
Problemereignisname: AppHangB1
Anwendungsname: firefox.exe
Anwendungsversion: 35.0.0.5486
Anwendungszeitstempel: 54af74c1
Absturzsignatur: 107e
Absturztyp: 0
Betriebsystemversion: 6.1.7600.2.0.0.256.1
Gebietsschema-ID: 1031
Zusätzliche Absturzsignatur 1: 107e5d704da7ec5a39a20e7c59830847
Zusätzliche Absturzsignatur 2: bca4
Zusätzliche Absturzsignatur 3: bca474c890a1f4c000075bf4b26a2dc2
Zusätzliche Absturzsignatur 4: 107e
Zusätzliche Absturzsignatur 5: 107e5d704da7ec5a39a20e7c59830847
Zusätzliche Absturzsignatur 6: bca4
Zusätzliche Absturzsignatur 7: bca474c890a1f4c000075bf4b26a2dc2
Lesen Sie unsere Datenschutzbestimmungen online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0407
Wenn die Onlinedatenschutzbestimmungen nicht verfügbar sind, lesen Sie unsere Datenschutzbestimmungen offline:
C:\Windows\system32\de-DE\erofflps.txt
Aufgrund eines Problems kann dieses Programm nicht mehr mit Windows kommunizieren.
Problemsignatur:
Problemereignisname: AppHangB1
Anwendungsname: firefox.exe
Anwendungsversion: 35.0.0.5486
Anwendungszeitstempel: 54af74c1
Absturzsignatur: 107e
Absturztyp: 0
Betriebsystemversion: 6.1.7600.2.0.0.256.1
Gebietsschema-ID: 1031
Zusätzliche Absturzsignatur 1: 107e5d704da7ec5a39a20e7c59830847
Zusätzliche Absturzsignatur 2: bca4
Zusätzliche Absturzsignatur 3: bca474c890a1f4c000075bf4b26a2dc2
Zusätzliche Absturzsignatur 4: 107e
Zusätzliche Absturzsignatur 5: 107e5d704da7ec5a39a20e7c59830847
Zusätzliche Absturzsignatur 6: bca4
Zusätzliche Absturzsignatur 7: bca474c890a1f4c000075bf4b26a2dc2
Lesen Sie unsere Datenschutzbestimmungen online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0407
Wenn die Onlinedatenschutzbestimmungen nicht verfügbar sind, lesen Sie unsere Datenschutzbestimmungen offline:
C:\Windows\system32\de-DE\erofflps.txtNo, the same problem..........for 3 times
Allgemeine Informationen
Name: Firefox
Version: 35.0
User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:35.0) Gecko/20100101 Firefox/35.0
Fenster mit mehreren Prozessen: 0/1
Absturzberichte der letzten 3 Tage
Alle Absturzberichte
Erweiterungen
Name: Adblock Plus
Version: 2.6.7
Aktiviert: true
ID: {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Name: DownloadHelper
Version: 4.9.24
Aktiviert: true
ID: {b9db16a4-6edc-47ec-a1f4-b86292ed211d}
Name: Freemake Video Downloader Plugin
Version: 1.0.0
Aktiviert: false
ID: [email protected]
Name: Freemake Youtube Download Button
Version: 1.0.0
Aktiviert: false
ID: [email protected]
Grafik
Direct2D aktiviert: true
DirectWrite aktiviert: true (6.1.7600.16385)
Geräte-ID: 0x9616
GPU #2 aktiv: false
GPU-beschleunigte Fenster: 1/1 Direct3D 11 (OMTC)
Karten-Beschreibung: AMD 760G
Karten-RAM: 256
Karten-Treiber: atiumd64 atidxx64 atiumdag atidxx32 atiumdva atiumd6a atitmm64
Subsys-ID: 00000000
Treiber-Datum: 7-30-2009
Treiber-Version: 8.641.0.0
Vendor-ID: 0x1002
WebGL-Renderer: Google Inc. -- ANGLE (AMD 760G Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: true
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
Wichtige modifizierte Einstellungen
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 2
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20150108202552
browser.startup.homepage: http://www.t-online.de/nachrichten/
browser.startup.homepage_override.buildID: 20150108202552
browser.startup.homepage_override.mstone: 35.0
dom.ipc.plugins.flash.disable-protected-mode: true
dom.mozApps.used: true
extensions.lastAppVersion: 35.0
gfx.direct3d.last_used_feature_level_idx: 1
media.gmp-gmpopenh264.lastUpdate: 1421512943
media.gmp-gmpopenh264.version: 1.1
media.gmp-manager.lastCheck: 1422019106
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1422019106
places.history.expiration.transient_current_max_pages: 100616
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
privacy.sanitize.migrateFx3Prefs: true
privacy.sanitize.timeSpan: 0
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1421513244
Wichtige nicht veränderbare Einstellungen
JavaScript
Inkrementelle GC: true
Barrierefreiheit
Aktiviert: false
Barrierefreiheit verhindern: 0
Bibliotheken-Versionen
NSPR
Minimal vorausgesetzte Version: 4.10.7
Verwendete Version: 4.10.7
NSS
Minimal vorausgesetzte Version: 3.17.2 Basic ECC
Verwendete Version: 3.17.2 Basic ECC
NSSSMIME
Minimal vorausgesetzte Version: 3.17.2 Basic ECC
Verwendete Version: 3.17.2 Basic ECC
NSSSSL
Minimal vorausgesetzte Version: 3.17.2 Basic ECC
Verwendete Version: 3.17.2 Basic ECC
NSSUTIL
Minimal vorausgesetzte Version: 3.17.2
Verwendete Version: 3.17.2
Experimentelle Funktionen
------------------------- -
How to install developer suite on windows vista
trying to install the dveloper suite on windows vista, keep gettting error that the pagefile(swap file) size is 0 and need to fix this problem.
did any one have this problem
using developer suite x86-101202 (compatibility mode xp sp2)Have you followed the steps under "III. After the install completed" in this thread?
Forms 10g installed and running on Windows Vista
And note the fourth paragraph from the top. There is a BIG bug in Forms Builder 10g running on Vista. When you try to compile a program unit (procedure) that calls another one that has compiler errors, the Forms Builder crashes. So it can be pretty frustrating if you actually try do any forms development work. -
Disk Problems, OSX partition will not repair is Windows CHKDSK the culprit?
Hi,
I have both Snow Leopard (fully updated) and Windows 7 on Bootcamp partition on my MacBook Pro.
Repairing Permissions on my Mac OS 10.6.4 partition had become a very regular with 'Java' permission problems always seeming to be a very regular and common one.
Anyhow, I thought it appropriate and logical to run the WIndows 7 equivalent of disk-verify/disk-repair/permission-repair and therefore run CHKDSK at 'CMD' level and this appeared to run accordingly without problems.
At some point/days later, my Mac OS appeared to be slow and having a lot of spinny-ball, therefore verified Macintosh HD volume-disk with Disk Utility and showed to have lots of problem. Disk Utility Repair has failed having tried it many times and not even Drive Genius 3 is able to repair or rebuild it on this occasion however I was able to run a 'Scan' on it from Drive Genius 3 and it reported thankfully that there was NO bad blocks.
The error thats returned repeatedly when doing a repair is "Incorrect number of thread records" which is reported immediately after "Checking Catalog File"
Not keen on the thought of having to format, re-install and then re-setup the system even from a Super-Duper backup copy that I had made previously (minus some data since).
However, my questions are:
1. Is it possible that the Windows 7 'CHKDSK' command may have possibly caused this despite the fact that it would have or should have only performed it's operations on the BOOTCAMP disk partition?
2. Is it possible to reformat and restore any previously backed-up images to a single disk partition _without upsetting the other Partition and OS_ residing on it (albeit on the same overall physical disk), i.e. Restoring my Mac OS X SuperDuper backup image back onto the current Mac partition... and would the same apply if ever having to restore a Windows 7 Acronis backup image back onto the current BOOTCAMP partition.
3. Would there be another alternative before a drastic reformat and recovery of the Mac OSX partition (if that's even possible without affecting BOOTCAMP - from question 2 above)
Advice would be much appreciated, many thanx.At the time I had run the 'CHKDSK' command from within Windows, from the 'Run' command prompt located within the Start Menu.
Fortunately I still have the previous HDD that originally came with the MacBook Pro before I upgraded the internal drive some time ago and therefore I have been able to boot externally from this and continue to do so until I've decided what to do, which looks like a recovery from the previous super-duper backup will be inevitable.
I guess I'm unlikely to come across any software or fix that will be capable of correcting the 'faulty number of thread records' being reported after the 'Checking Catalog File' disk repair check routine, however if I find a solution then I'll post it here, otherwise an eventual recovery/install it is.
Under Fortuny's revelation, I will procede with MacDrive with caution and probably disable it if ever running a Windows CHKDSK again (if indeed this is the underlying cause of the problem). And under your advise 'The hatter' I shall certainly look into the Windows system file checker alternative, thanks. -
Problem in startup of Shadow Instance (START_SHDI_FIRST)
Hi Experts
I am having problem in 4.6B - ERP6.0 Upgrade. I have problem in startup of Shadow Instance. Here is log description.
DEVTRACE.LOG
trc file: "dev_ms", trc level: 1, release: "700"
Thr 01 Fri Feb 22 19:53:01 2008
Thr 01 MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 133
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 7614
Thr 01 ***LOG Q01=> MsSInit, MSStart (Msg Server 1 7614) http://msxxserv_mt. 1824
Thr 01 SigISetDefaultAction : default handling for signal 18
Thr 01 load acl file = /usr/sap/put/<SID>/SYS/global/ms_acl_info
Thr 01 MsGetOwnIpAddr: my host addresses are :
Thr 01 1 : http://192.168.21.21 <hostname> (HOSTNAME)
Thr 01 2 : http://127.0.0.1 localhost (LOCALHOST)
Thr 01 MsHttpInit: full qualified hostname = <hostname>
Thr 01 HTTP logging is switch off
Thr 01 ms/icf_info_server : deleted
Thr 01 *** I listen to port sapmsSHD<SID> (3602) ***
Thr 01 CUSTOMER KEY: >L0506167855
trc file: "dev_rd", trc level: 1, release: "700"
Fri Feb 22 15:25:15 2008
***LOG S00=> GwInitReader, gateway started ( 1059) http://gwxxrd.c 1691
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 133
intno 20050900
make: single threaded, ASCII, 64 bit, optimized
pid 1059
gateway runs with dp version 232(ext=109) (@(#) DPLIB-INT-VERSION-232)
gateway (version=700.2007.10.01)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
Bind service sapgw02 (socket) to port 3302
GwPrintMyHostAddr: my host addresses are :
1 : http://192.168.21.21 <hostname> (HOSTNAME)
2 : http://127.0.0.1 localhost (LOCALHOST)
Full qualified hostname =
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
Fri Feb 22 15:25:20 2008
DpShMCreate: sizeof(wp_adm) 70080 (960)
DpShMCreate: sizeof(tm_adm) 51017496 (25496)
DpShMCreate: sizeof(wp_ca_adm) 184800 (88)
DpShMCreate: sizeof(appc_ca_adm) 8800 (88)
DpCommTableSize: max/headSize/ftSize/tableSize=2000/8/2192040/2192048
DpShMCreate: sizeof(comm_adm) 2192048 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1840)
DpShMCreate: sizeof(wall_adm) (224040/346312/80/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: ffffffff5bc00000, size: 54051296)
DpShMCreate: allocated sys_adm at ffffffff5bc00000
DpShMCreate: allocated wp_adm at ffffffff5bc01cc0
DpShMCreate: allocated tm_adm_list at ffffffff5bc12e80
DpShMCreate: allocated tm_adm at ffffffff5bc12ee0
DpShMCreate: allocated appc_ca_adm at ffffffff5ece77d8
DpShMCreate: allocated comm_adm at ffffffff5ece9a38
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at ffffffff5ef00ce8
DpShMCreate: allocated gw_adm at ffffffff5ef00d68
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at ffffffff5ef00d98
MtxInit: -2 0 0
Fri Feb 22 15:25:26 2008
GwDpInit: attached to gw_adm at ffffffff5ef00d68
Fri Feb 22 15:25:44 2008
caught SIGINT (2)
***LOG S30=> GwStopGateway, gateway stopped () http://gwxxrd.c 14586
STARTSFI.LOG
1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080222195300")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
4 ETQ399 Set environment for shadow connect:
4 ETQ399 ENV: dbs_ora_schema=SAPR3
4 ETQ399 ENV: auth_shadow_upgrade=1
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '02', GwService = 'sapgw02'
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SW<SID>H"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2 ETQ353 Starting system
4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/put/<SID>/homeshd/<SID>
4 ETQ399 ext. env.: LD_LIBRARY_PATH=/usr/sap/put/<SID>/homeshd/<SID>:/usr/j2se/jre/lib/sparc/c
lient:/usr/j2se/jre/lib/sparc:/usr/j2se/jre/../lib/sparc:/oracle/<SID>/102_64/lib:/usr/sap/I
TC/SYS/exe/run:/oracle/client/10x_64/instantclient
4 ETQ399 2008/02/22 19:53:00: put_execute: (startsap) forkpid:7500
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
2EETQ399 Dialogue: ERROR
2EETQ399 Starting system failed, rc=0
Please let me know if you have any ideas.
Thanks & best Regards
L RaghunahthHi ,
I am forwarding the dev_w0 log.
dev_w0 ==> log is as follows
M Fri Feb 22 15:25:26 2008
M ab_init o.k.
M ThrInitGlobals o.k.
M ThrCreateShObjects allocated 150834 bytes at ffffffff52200000
M SosRegisterMemAddr: add mem addr ffffffff52200000 / >thr_serv_info<
M SosRegisterMemAddr: add mem addr ffffffff52200010 / >thr_wpadm<
M ThrCreateShObjects o.k.
M SosRegisterMemAddr: add mem addr 1050aace0 / >ztta<
M SosRegisterMemAddr: alloc/realloc table
M SosRegisterMemAddr: add mem addr 105328a60 / >spa<
M ThrRegisterMemAddrs o.k.
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtRegJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtRegWpWriterJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegWpJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegUsrJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegMemJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegSysJavaNatives failed (-1)
M ThrInitRunTime o.k.
M ab_startup o.k.
N SsfSapSecin: putenv(SECUDIR=/usr/sap/put/<SID>/DVEBMGS02/sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/put/exe/libsapsecu.so .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
M load shared library (/usr/sap/put/exe/libsapsecu.so), hdl 1
N ===...sucessfully completed.
N =================================================
M
M Returncode of AlMCCreateAttach (): 50
M Returncode of AlMOCreateAttach (): 50
M Returncode of AlSmesCreateAttach (): 50
M *** Start of API function likey_init ***
M likey_init: sid = "<SID>"
M likeymem_calloc (2, 21) for type "List of the SW products" returns 1050a55e0.
M likey_init: products [0] = "R3_ORA "
M likey_init: products [1] = "R3_BASIS "
M likey_init: basis_release = "700"
M likey_init: temporary license keys allowed.
M likey_init: running within the SAP WebAS ABAP.
M Generated absolute filename of the verify PSE: "/usr/sap/put/<SID>/DVEBMGS02/sec/LASVerif
y.pse"
M PSE name "/usr/sap/put/<SID>/DVEBMGS02/sec/LASVerify.pse" memorized.
M The contents of the PSE file "/usr/sap/put/<SID>/DVEBMGS02/sec/LASVerify.pse" is the 2038
version.
M SAPSECULIB initialized by calling SsfLibGetToolkit ().
M likeyper_init: insert_record memorized.
M likeyper_init: update_record memorized.
M likeyper_init: delete_record memorized.
M likeyper_init: get_record memorized.
M likeyper_init: get_all_records memorized.
M likeyper_init: cleanup memorized.
M likeyche_get_existing_buffer: buffer found in EG memory.
M likeyche_get_existing_buffer: magic number okay, reserved entries = 5, used entries = 0
M *** End of API function likey_init ***
M SAPlicense: LIKEY initialisation done
M ThBtcClnZombies o.k.
M Enq-Reset-Registration o.k.
M SosRegisterHook: add hook >rsts_storage_free(101a2ee78)< for event AFTER_STORAGE_FREE
M SosRegisterHook: add hook >rsts_before_commit(101a2efb0)< for event BEFORE_COMMIT
M SosRegisterHook: add hook >rsts_after_commit(101a2f098)< for event AFTER_COMMIT
M SosRegisterHook: add hook >rsts_after_rollback(101a2f168)< for event AFTER_ROLLBACK
M SosRegisterHook: add hook >rsts_after_rollback(101a2f168)< for event AFTER_ROLLBACK_WOR
K
M SosRegisterHook: add hook >rsts_after_rollin(101a2acd0)< for event AFTER_ROLL_IN
M SosRegisterHook: add hook >rsts_before_rollout(101a2acec)< for event BEFORE_ROLL_OUT
M DpISetTrcLog: trc logging active, max size = 20971520 bytes
M DpISetTrcLog: sw<SID>h off trace logging global is off
M DpISetTrcLog: trc logging active, max size = 20971520 bytes
M ThSetTrcLogParam2 o.k.
M register db commit/rollback hook o.k.
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M MskiInitLogonTicketCacheHandle o.k.
M ThrtRegisterJCoNatives o.k.
M JrfcVmcRegisterNativesDriver o.k.
M ThJRegNatives3: java not active
M EnqVmcRegisterNatives failed
M ThJRegNatives3: java not active
M JMonVmcRegisterNatives failed
M ThJRegNatives3: java not active
M JTSAuthorityRegisterNatives failed
W =================================================
W === ipl_Init() called
W ITSP ICMAN is not active: Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
M ipl_Init returns 2 ITSPE_DISABLED: Service is disabled (sapparam)
M SosRegisterHook: add hook >DbgBeforeSessionEnd(100495c64)< for event BEFORE_SESSION_END
M SosRegisterHook: add hook >DbgBeforeTaskSw<SID>h(10049575c)< for event BEFORE_TASK_SW<SID>H
M ThDbgInit returns 0
M ThJRegNatives3: java not active
M ThDSysEnv: delete environment
M REL WP ca_blk 56
M ThDtWpBlk: detach WP ca_blk 56
M REL APPC ca_blk 2
M ThDtAppcBlk: detach APPC ca_blk 2
M ThIEmFree: delete hyper context (hyperHdl=fffffffdd99f1e60)
M ThIEmFree: call EmContextDelete (em_hdl=0)
M set act fields to T-1/M255
M ThSetProcessPriority o.k.
M SosRegisterMemAddr: add mem addr ffffffff57412e80 / >tm_adm_list<
M SosRegisterMemAddr: add mem addr ffffffff57412ee0 / >tm_adm<
M SosRegisterMemAddr: add mem addr ffffffff57401cc0 / >wp_adm<
M SosRegisterMemAddr: add mem addr ffffffff53000000 / >wp_ca<
M SosRegisterMemAddr: add mem addr ffffffff5a4ba5f8 / >wp_ca_adm<
M SosRegisterMemAddr: add mem addr ffffffff5a4e9a38 / >comm_adm<
M SosRegisterMemAddr: add mem addr ffffffff5702edc0 / >appc_ca<
M SosRegisterMemAddr: add mem addr ffffffff5a4e77d8 / >appc_ca_adm<
M SosRegisterMemAddr: add mem addr 0 / >vmc_adm<
M SosRegisterMemAddr: alloc/realloc table
M SosRegisterMemAddr: add mem addr ffffffff57400000 / >sys_adm<
M ThCheckComOrRb (event=1, full_commit=0)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThCheckComOrRb (event=3, full_commit=0)
M ThCallHooks: call hook >dyKeyTableReset< for event AFTER_COMMIT
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M db_commit98 (keep resources) o.k.
M SigSave o.k.
M rdisp/rfc_use_quotas : 1
M rdisp/rfc_max_queue : 5
M rdisp/rfc_max_login : 90
M rdisp/rfc_max_own_login : 25
M rdisp/rfc_min_wait_dia_wp : 1
M rdisp/rfc_max_own_used_wp : 75
M rdisp/rfc_max_comm_entries : 90
M rdisp/rfc_max_wait_time : 15
E Fri Feb 22 15:25:29 2008
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M init lock table o.k.
M ThrSetMemHdl o.k.
M ThInit o.k.
M SigIRegisterExitRoutine: exithandler installed (ThSigHandler)
M TskhLoop: tell dispatcher: I'am ready for processing
M LOCK WP ca_blk 56
M LOCK APPC ca_blk 2
M ThIEndBg: end background processing of T-1 (type=0x41, logoff=1, freeResources=0)
M ThISend: (tm/user/type/info = -1/ ?/0x41/0x0, mode_deleted=1)
M TASK_SW<SID>H
M DISP
M abap strategy ROLL / O.K.
M ThRqOutCheck: o.k.
M ThNewWpStat (type=0x41, task_sw<SID>h=1, inline_hold=0, hand_shake=0, debug=0, ..)
M ThISend: new wp stat: 0x2
M rdisp/wp_auto_restart = 0 sec
M rdisp/wp_abap_restart = 0
M ThSetThToolParam : restartable_wp[0] = FALSE
M ThSetThToolParam : restartable_wp[1] = TRUE
M ThSetThToolParam : restartable_wp[2] = TRUE
M ThSetThToolParam : restartable_wp[3] = FALSE
M ThSetThToolParam : restartable_wp[4] = TRUE
M ThSetThToolParam : restartable_wp[5] = TRUE
M ThSetThToolParam : restartable_wp[6] = TRUE
M ThDtWpBlk: detach WP ca_blk 56
M ThISend: clear stat record
M PfClearAllRec: clear statistic area
M ThISend: stat_state = TH_STAT_CLEAR
M ThISend: th_wp_waits_for_rq = TH_WP_WAITS_FOR_RQ
M make DISP owner of wp_ca_blk 56
M DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 18)
M -OUT- sender_id WORK_PROCESS tid -1 wp_ca_blk 56 wp_id 0
M -OUT- action SEND_TO_DP uid -1 appc_ca_blk -1 type NOWP
M -OUT- new_stat WP_WAIT mode 0 len 8 rq_id 18
M wake_evt_udp_now 1, no dgram needed
M REL APPC ca_blk 2
M ThDtAppcBlk: detach APPC ca_blk 2
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SW<SID>H
M TrThHookFunc: called for task sw<SID>h
M ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SW<SID>H
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SW<SID>H
M ThCallHooks: call hook >DbgBeforeTaskSw<SID>h< for event BEFORE_TASK_SW<SID>H
M
M ********* W0 LOOP (DIA) *********
M TskhLoop: save spa pointer 105328a60 and install dummy spa
M ThRqWaitFor: wait for next request (new time slice)
M event-handling: W0, key 50240, flag 50240
M ThAlarm: no previous alarm
M ThRqWaitFor: wait for request
M Fri Feb 22 15:25:42 2008
M in_ThErrHandle: 1
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M ThCallDbBreak: use db_sqlbreak
M ThIErrHandle: don't try rollback again
M ThShutDownServer: shutdown server
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ThDBDisconnect: disconnect from data base
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time
DBHost
B 000 000 R/3 000000000 INACTIVE NO YES NO 000 255 255 20080222 152515
<hostname>
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=105b54538,usrhp=105b51478)
C Detaching from DB Server (con_hdl=0,svchp=105b54538,srvhp=105b56868)
C Now I'm disconnected from ORACLE
B Disconnected from connection 0
B statistics db_con_commit (com_total=2, com_tx=0)
B statistics db_con_rollback (roll_total=0, roll_tx=0)
M ThDBDisconnect: disconnect o.k.
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1060) [dpuxtool.c 260]
M Good Bye .....
Best Regards,
L Raghunahth -
Dear all
i m facing a little problem in startup 10g DB i m using 10g DB on Windows 2000 Professional operating system
when i start data base from enterprize manager i log on SYS user then i select Startup then i feed some parameter like
1) Host Credentials
Specify the OS user name and password to login to target database machine
i feed there operating system user name & passowrd
then
2)Specify the credentials for the target database.
To use OS authentication, leave the user name and password fields blank.*
i enter sys user and his password
Database yasir
Connect As SYSOPER
when i pressed OK button then ii face that error
Error Message
RemoteOperationException: ERROR: Wrong password for user
but my both password operatin system & sys password are correct
any one have any idea what is problem & how can i slove my problem
Thanks
RizwanFrom control panel go to
1. Administrative tool---local security policy---local security settings
2.From the local security settings windows: local policies---user rights assignment
3.double click "log on as a batch job, add the administrative user you want to assign on the OEM.
Hope this works for you. -
Problem in using nokia pc suit
hi,
i m purchasing new dell inspiron laptops on windows based , and i m try to used to connect internet through my nokia 5230 handset. But problem is that, nokia pc suit not working
Notification "dignostic problem " and "modem not found"to use you phone a bluetooth modem (only), you don't need to install pcsuite.
Pair your phone with pc/laptop.
Enable remote sim, let your phone always show itself other device(dicoverable).
Set you laptop as authorised in your phone so that it connect automaticaally (you don't need to click yes, yes......)
Pc should dectect generic serial port, generic bluetooth modem etc
Enable DUN in blutooth device property(pc)
Create a dailup connection.
In phone no field type*99#
Username and password-blank or call your operator if required.
Done
Click on dial -
Disabling Auto-Load option on Context Window
Greetings to everyone,
I have a request for something we have been working on for the school district I work for and we are currently at an impass on this matter. We have a restricted account for students to use. One problem we are running into is that students will tell the program to "Open at Login" on the computers. I would like to know if there is a way to disable this option on the cotext window for items on the dock.
My thanks in advance for anyone who has any ideas.
ANottiThanks, locking the file loginwindow.plist did the ticket for me. I had been struggling with this for a while and did not notice that the file there would be the one that was being opened. I do not have a com.apple.loginwindows.plist but there was one without the com.apple part at the bottom which did the trick for me.
Thanks again BDAqua,
ANotti -
Acrobat Reader XI addon gets disabled periodically in Internet Explorer within Windows domain
We have a followig problem that happens on new workstations with Windows 7 x64 and Acrobat Reader XI only.
Every few days (cca 3-30) the following key is automatically added to registry:
HKCU\Software\Microsoft\Windows\CurrentVersion\Ext\Settings\{CA8A9780-280D-11CF-A24D-444553540000}
This key has the effect that Acrobat Reader XI gets disabled in Internet Explorer add-ons. So when user opens PDF in IE (or SAP or other Windows software using IE), it is not opened within IE but in a new separate window.
Can you please suggest what can be the reason for this, like group policy etc.?From here:
http://serverfault.com/a/666205/229754
I quote:
Assuming you have installed
Microsoft Window 7+ / Server 2008 R2+
Microsoft Internet Explorer 11+ (IE)
Adobe PDF Reader 11+ (Reader)
Microsoft System Center Endpoint Protection / Microsoft Malware Protection (MalwareProtection)
the following seems to happen here:
MalwareProtection registers a component named Microsoft Antimalware IOfficeAntiVirus implementation (MpOAv) for Extension Validation with IE.
IExtensionValidation interface
For Internet Explorer 11, specifies an interface the anti-malware vendors can implement. Vendors that register support for this interface may be called by IE11 to validate that an ActiveX control is safe to instantiate.
MpOAv registers as a CLSID of {2781761E-28E1-4109-99FE-B9D127C57AFE}.
[HKLM\SOFTWARE\Microsoft\Internet Explorer\Extension Validation\{2781761E-28E1-4109-99FE-B9D127C57AFE}] [HKLM\SOFTWARE\Wow6432Node\Microsoft\Internet Explorer\Extension Validation\{2781761E-28E1-4109-99FE-B9D127C57AFE}]
You can inspect the detailed properties of MpOAv in the registry. The associated DLL usually resides at C:\Program Files (x86)\Microsoft Security Client\MpOAv.dll
[HKCR\CLSID\{2781761E-28E1-4109-99FE-B9D127C57AFE}] [HKCR\Wow6432Node\CLSID\{2781761E-28E1-4109-99FE-B9D127C57AFE}]
Now everytime IE wants to run an ActiveX control, the registered MpOAv is being called before that and sometimes misbehaves or simply thinks that the Reader ActiveX control is not safe. I have no idea what its behavior really depends on.
This all results in IE (iexplore.exe) writing 2 keys to the registry: The CLSIDs of MpOAv {2781761E-28E1-4109-99FE-B9D127C57AFE} and Reader {CA8A9780-280D-11CF-A24D-444553540000}.
[HKCU\Software\Microsoft\Windows\CurrentVersion\Ext\Settings\{2781761E-28E1-4109-99FE-B9D127C57AFE}] [HKCU\Software\Microsoft\Windows\CurrentVersion\Ext\Settings\{CA8A9780-280D-11CF-A24D-444553540000}]
From this point on IE will not run the Reader ActiveX control until someone manually removes its CLSID from there. This is the observed problem.
Will Adobe offer some solution to this issue???
I confirm the existence of metioned registry keys, looks promising! – Vojtěch Dohnal 11 mins ago
But I fear that removing MpOAv from validation extensions completely will result in less secure browsing for users. – Vojtěch Dohnal just now edit
add a comment -
Recovery harddrive is reporting a problem on startup. where do I start on trouble shooting the drive
Hi,
Shut down the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run a tests on the whole Hard Drive. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Maybe you are looking for
-
Not Sure when this started, but the wait is way too long. I can't tell what it is processing. Any suggestions would be appreciated. Randy
-
[SOLVED]How to disable USB autosuspend?
Hello! A long time ago I installed Arch on my notebook and configured it's power saving using laptop-mode-tools. I also installed pm-utils for suspend/hibernate. USB autosuspend worked correctly - on battery every device (including mouse) was suspend
-
Table to find out the function modules used in a particular program
Hi, Is there any standard table to find out the function modules used in a particular program? Such as there is a table D010TAB to find out the tables used in a program .
-
Internal Error while saving as HTML
I have a release 7 document, that I opened in latest FrameMaker (trial version). When I attempt to save it as HTML I get an Internal error. Here is the error log - === Header Begin === Internal Error: 10014, 7683061, 7685486, 7685654 FrameMaker 10.0.
-
Making RAID config of existing installed OSX server
Hi, the situation for the moment is: XServe with 1x60Gb disk and OSX Server with communigate, and a data disk 1x120Gb as backup drive. Can I make a mirror of 2x 120Gb without reinstallation of the server? eg: - Make an image of the 60Gb harddisk - Re